L Series Miniature Slide Switches Features/Benefits Typical Applications • Positive detent • Communications equipment • Enclosed housing • Lighting devices • Maintained and momentary functions • PC and panel mounting • RoHS compliant Models Available Specifications Materials CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS HOUSING: 6/6 nylon (UL94V-2), black. I @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ ACTUATOR: 6/6 nylon (UL94V-2), black. 125 V DC (UL). See page I-23 for additional ratings. ‘13’ actuator, natural (standard). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACTS: Q contact material: Copper, silver plated. See page S l CONTACT RESISTANCE: Below 10 m Ω typ. initial I-23 for additional contact materials. id @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. TERMINALS: Q contact material: Copper, silver plated. See page e INSULATION RESISTANCE: 109 Ω min. I-23 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. CONTACT SPRING: Music wire or stainless steel. OPERATING TEMPERATURE: -30ºC to +65ºC TERMINAL SEAL: Epoxy. STORAGE TEMPERATURE: -30ºC to +85ºC NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center. Switch Function L202 DPDT Actuator L203 DP3T 01 .200” high L101 SPST 02 .335” high L102 SPDT 03 .375” high L103 SP3T 05 .312” high L104 SP4T 11 .100” high L112 SPDT, mom. 12 Screwdriver slot L113 SP3T, mom. to one end 13 Plunger without cap L123 SP3T, mom. to both ends 14 Plunger with .200” dia. cap L201 DPST 15 Plunger with .310” dia. cap L204 DP4T 17 Plunger with .458” dia. cap L212 DPDT, mom. 19 Plunger with .590” dia. cap Detent 1 With detent 2 Without detent Mounting Style MS PC Thru-hole MA Right angle, PC thru-hole Terminations ML Right angle, PC thru-hole 02 PC Thru-hole MV Right angle, PC thru-hole 01 Solder lug with notch SS Panel with mounting ears 03 Solder lug with hole Contact Material TS Panel with integral mounting ears 04 PC Thru-hole B Gold 10 PC Thru-hole Q Silver 06 Wire wrap G Gold over silver 12 PC Thru-hole Seal NONE No seal E Epoxy seal Cap Color 2 Black NONE No cap Dimensions are shown: Inches (mm) 19 Mar 2019 Specifications and dimensions subject to change www.ckswitches.com I–19

L Series Miniature Slide Switches SWITCH AND LOCK FUNCTION AVAILABLE AVAILABLE NO. MODEL MOUNTING NO. MODEL SWITCH MOUNTING POLES NO. SWITCH FUNCTION SCHEMATIC STYLES POLES NO. FUNCTION SCHEMATIC STYLES L101 SPST ML, MS, SS L201 DPST MA, MS, SS L102 SPDT ML, MS, SS L112 SPDT-MOM. 1 2 3 ML, MS, MV, SS L202 DPDT MA, MS, SS SP L103 SP3T MA, MS, TS DP L212 DPDT-MOM. MV L113 SP3T-MOM. to one end MA, MS, TS I L123 SP3T-MOM. to both ends MA, MS, TS L203 DP3T MS, TS e d li L104 SP4T MS S L204 DP4T MS NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. CAP COLOR ACTUATOR ACTUATOR ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES 01   02   03   05   11   12  .200” HIGH .335” HIGH .375” HIGH .312” HIGH .100” HIGH SCREWDRIVER SLOT .200 5,08 NOTE: No actuator color option code is required. Standard actuator color is black, other colors and heights available, consult Customer Service Center. See pages I-20 and I-22 for available mounting styles. ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE 13   14   15   PLUNGER WITHOUT CAP PLUNGER WITH CAP PLUNGER WITH CAP Cap part number 7089 Cap part number 8018 OPTION ACTUATOR CAP CODE COLORS 17   19   PLUNGER WITH CAP PLUNGER WITH CAP 2 BLACK NONE 01-13 ACTUATORS Other colors available, consult Customer Service Center. Cap part number 7982 Cap part number 8940 ACTUATOR CAPS Caps supplied are not installed standard. To order actuator options ‘14 thru 19,’ select desired cap color from chart and place option code in last box of ordering format. Leave box empty for all other actuator options. Caps may also be ordered separately and user installed, see pages I-23 and I-24. Specify the four digit part number and desired cap color. For switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square cap part number 7982, finish: matte). Dimensions are shown: Inch (mm) 19 Mar 2019 Specifications and dimensions subject to change www.ckswitches.com I–20

L Series Miniature Slide Switches DETENT 1   WITH DETENT Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204. 2   WITHOUT DETENT Standard with all momentary models: L112, L123, and L212. MOUNTING STYLE MS   PC THRU-HOLE, 2 POSITION MODELS .200 .288 (5,08) (7,32) .425 .225 TYP AVAILABLE WITH: (10,79) .150 TRAVEL .(10,5207 )X X . 0(02,05 1T)YP (5,71) .(52,2750 )TYP Models: L101, L102, L112, L103, L113 L123, I (3,81) 6 3 L201, L202, L203, L104 and L204 .752 5 2 Terminations: 02, 06, 10 and 12 (19,10) .200 .181 TYP 4 1.181 TYP Actuators: 01, 02, 03, 05, 11 and 12 S .(31,2158 )TYP (5,08).070(1 T,7Y8P) .221 T(Y4P,60)TREREFMEINRAENL CNEO OS.N FL(O4Y,R60) .(10,6655 )D TIAYP PFoCr MmOouUnNtinTgIN inGformation, see lide (5,61) TERMINATIONS section, page I-23. L203011MS02Q DP3T PC THRU-HOLE, 3 POSITION MODELS PC THRU HOLE, 4 POSITION MODELS (1.402,759) (.52,0008) .(72,8382) .225 TYP .(41,7302 )T TRYAPVEL .(10,5207 )X X . 0(02,05 1T)YP 10 5(5,71) .(52,2750 )TYP 9 4 (12.81,2520) 8 3 .181 TYP 7 2 (4,60) 6 1 .070(1 T,7Y8P) .(10,5207 )TYP TERMINAL NOS. F.1O8R1(4 T,6Y0P) .(10,6655 )D TIAYP .232 TYP REFERENCE ONLY (5,89) MA   RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: L103, L201, L202, L113 and L123 Terminations: 04 Actuators: 02 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L202021MA04Q Horizontal Actuation DPDT RIGHT ANGLE, PC, SP-3 POSITION MODELS .400 .335 .412 .100 TYP (10,16) (8,51) (10,46) (2,54) .140 TR(A4V,0E6L) 4 .(41,8610 )TYP 4 0.941 3 3 (23,90) 2 .(52,0008) 12 TERM. NOS. FOR 1 REFERENCE ONLY .100 TYP (2,54) .256 (6,50) 0.125 .215 (3,18) (5,46) Dimensions are shown: Inches (mm) 19 Mar 2019 Specifications and dimensions subject to change www.ckswitches.com I–21

L Series Miniature Slide Switches MOUNTING STYLE ML   RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: L101, L102, L112 Terminations: 04 Actuators: 01, 02, 05, 11 and 12 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L102021ML04Q Horizontal Actuation SPDT I MV   RIGHT ANGLE, PC THRU-HOLE e d i Sl AVAILABLE WITH: Models: L112 and L212 Terminations: 02, 06, 10 and 12 Actuators: 13 thru 19 PC MOUNTING For mounting information, see TERMINATIONS section, page I-23. L212132MV02Q DPDT SS   PANEL WITH MOUNTING EARS PANEL MOUNTING .425 .358 (10,60) ø(2 .,15040) (9,09) .181 TYP (5.2,7225) .(31,3453) (4,60) 6 1.000 .360 1.200 6 3 (25,40) (9,14) (30,48) 5 (1.796,300) 5 2 1.000 (25,40) .200 4 4 1 .150 (5,08) L202011SS03Q TR(A3V,8E1L) .200 .(10,7708 )TYP .(21,1709 øD)I ATYP DPDT .125 (5,08) .240 AVAILABLE WITH: (3,18) .050 (6,10) Models: L101, L102, L112, L201 and L202 (1,27) Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 TS   PANEL WITH INTEGRAL MOUNTING EARS PANEL MOUNTING 0.250 ø (6,35) .425 .240 (10,80) .070 TYP (6,10) ø 0.100 TYP .135 (1,78) (2,54) (3,43) L203D01P13TTS03Q (12.50,0400(2).934,910) .(T41R,60A06V )TEYLP (.52,0008) 765 FUTL0(Y2L.P,15 .R040) CAVITY I.D. 0.0625 HIGH X0.010 RAISED2X 0.050(1,27)(12.50,0400) (12.50,0400) (1..5313,14006 )DIA .181 2X 0.050 (2,79ø) .125 (4,60) (1,27) (3,18) TYP 2X 0.218 0.080 .200 .358 (5,53) (2,03) (5,08) (9,09) AVAILABLE WITH: Models: L103, L113, L123 and L203 Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 19 Mar 2019 www.ckswitches.com I–22

L Series Miniature Slide Switches TERMINATIONS ‘MS, MV, SS & TS’ Mounting Styles Only 02   01   03   10   PC THRU-HOLE SOLDER LUG WITH NOTCH SOLDER LUG WITH HOLE PC THRU-HOLE .085 .226 .240 (2,16) .240 .226 .060 (5,74) (6,10) (6,10) (5,74) (1,52) .062 (2.0,0830) .(10,5207) (1,5(27.0,)0830) .(00,2781) (2.0,0830) .(10,4167) (2.0,0830) .(10,5207) (.62,7921) .020 THK. .020 THK. .020 THK. .020 THK. (0,51) (0,51) (0,51) (0,51) ‘MA & ML’ Mounting Styles Only 12   06   PC THRU-HOLE WIRE WRAP 04   PC THRU-HOLE I .419 (10,64) .065 .445 .256 (1,65) (11,30) .085 (6,50) (2.0,0830) .(10,5207) (2.0,0830) .(10,5207) ((22.0,,108630)) .050 Slid .020 THK. .020 THK. (1,27) e (0,51) (0,51) .020 THK. (0,51) .181 TYP. .181 TYP. (4,60) (4,60) .187( 4T,Y7P5.) .225.181( 4T,Y6P0.) .272.181( 4T,Y6P0.) (5.2,7225.)181( 4T,Y6P0.) (6.2,9712).181( 4T,Y6P0.) .0(615,6 D5(5I.øA2,7)225) .0(615,6 D5(Iø6A.)2,9712) (5,72) (6,91) .065 DIA .065 DIA TYP. TYP. .06(15, 6D5IAø .0(615,6 D5IøA) .0(615,6 D5IøA) (1,T6Y5Pø.) (1,T6Y5Pø.) TYP. TYP. TYP. All models with ‘04’ All 2 position models, All 2 position models All 3 position models All 3 position models, All 4 position models, All 4 position models, terminations and except ‘04’ and ‘10’ with ‘04’ and ‘10’ except ‘04’ and ‘10’ with ‘10’ termination. except ‘04’ and ‘10’ with ‘10’ terminations. ‘ML’ mounting style. terminations. terminations. terminations. terminations. CONTACT MATERIAL OPTION CONTACT CODE MATERIAL RATINGS LOW LEVEL/DRY B GOLD 1 0.4 VA MAX. @20 V AC OR DC max. CIRCUIT LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). Q SILVER 2 POWER LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL). LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ GOLD OVER LOW LEVEL/DRY 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). G SILVER 3 CIRCUIT OR POWER LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. NOTE: Any models supplied with B, Q or G contact material are RoHS compliant. 2 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all options when ordered with ‘G’ or ‘Q’ contact material. 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE   E   NO SEAL EPOXY SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inches (mm) 19 Mar 2019 Specifications and dimensions subject to change www.ckswitches.com I–23

L Series Miniature Slide Switches AVAILABLE HARDWARE Cap Cap Cap Compatible with 13-19 actuators Compatible with 13-19 actuators Compatible with 13-19 actuators .375 DIA. .310 DIA. .200 DIA. (9,53 ) (7,87 ) (5,08 ) .120 .138 (3,05) .250 (3,51) (6,35) .155 .120 .250 (3,94) (3,05) (6,35) PART NO. PART NO. PART NO. 708902000 BLACK 752702000 BLACK 801802000 BLACK 708903000 RED 752703000 RED 801803000 RED Material: Nylon Material: Nylon Material: Nylon I Finish: Gloss Finish: Gloss Finish: Gloss Cap e Cap Cap Compatible with 13-19 actuators d Compatible with 13-19 actuators Compatible with 13-19 actuators i l S .450 SQ. (11,43) .195 (4,95) .240 (6,10) PART NO. PART NO. PART NO. PART NO. 452D02000 BLACK 894102000 BLACK 484602000 BLACK 798202263 BLACK 452D03000 RED 894103000 RED 484603000 RED 798203000 RED Material: Nylon Material: Nylon Material: Nylon Material: Nylon Finish: Gloss Finish: Gloss Finish: Gloss Finish: Matte Cap Compatible with 01-05 actuators NOTE: Other colors available, consult Customer Service Center. PART NO. 120100602 BLACK Material: Nylon Finish: Matte Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 19 Mar 2019 www.ckswitches.com I–24