Power Entry Modules with Line Filter KMF https://www.schurter.com /PG06 IEC Appliance Inlet with Filter, Fuseholder 1- or 2-pole, Line Switch 2-pole Order required accessories separately Protection class II without shield Protection class I with shield C14 C18 See below: Approvals and Compliances 70° C 70° C Description Characteristics - Panel mount : - Ultra-compact design. Small dimensions in front of and behind the pa- Snap-in version from front side nel - 4 Functions : - All single elements are already wired Appliance Inlet protection class I or II , Line Switch 2-pole , Fuseholder - For added safety "Extra-Safe" fuse drawers are available for fuse-links 5 x 20 mm 1- or 2-pole , Line filter in standard and medi- - Innovative EMC-shielding with flexible steel segments for an excellent cal version contact - Quick connect terminals 4.8 x 0.8 mm - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Unique Selling Proposition - Most compact solution on the market Other versions on request - Innovative EMC-shielding - Fuse drawer 1-pole, plus spare fuse case - Easy and flexible snap-in mounting - Fuse drawer 2-pole, with shorting bar - Protection class I or II versions - Other rocker marking References Alternative: version without line filter KM Alternative: version for screw mounting DD12 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 C18 acc. to IEC 60320-1, Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125/250 VAC; UL 498, CSA C22.2 no. 42 (for cold 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I or II medical < 5 µA (250 V / 60 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Dielectric Strength > 1.7 kVDC between L-N acc. to IEC 60127-6, > 2.7 kVDC between L/N-PE for fuse-links 5 x 20 mm Test voltage (2 sec) Rated Power Acceptance @ 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per Allowable Operation Tempe- -25 °C to 85 °C Ta 23 °C pole rature Power Acceptance @ Ta > Admissible power acceptance at higher Climatic Category 25/085/21 acc. to IEC 60068-1 23°C ambient temperature see derating cur- ves IP-Protection from front side IP 40 acc. to IEC 60529 Line Switch 2-pole, non-illuminated, acc. to IEC Protection Class Suitable for appliances with protection 61058-1 class I or II acc. to IEC 61140 Technical Details Terminal Quick connect terminals 4.8 x 0.8 mm Line Filter Standard and Medical Version, IEC Panel Thickness S Snap-in: 1/1.5/2/2.5 mm 60939, UL 1283, CSA C22.2 no. 8 (all steps with one variant) Technical Details Material: Housing Thermoplastic, black, UL 94V-0 MTBF > 1'800'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1

KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KMF Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40035743 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CCC Certificate Number: CQC18001186843, CQC18001186863 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products

Power Entry Modules with Line Filter KMF https://www.schurter.com /PG06 Dimensions [mm] 30.4 R1.5 25.7 L 0 N 50 32 47.5 +0.1047.8-0.05 R 0.3 max. 7 0. 1 S±0.05 30.5 40.4 2.5 28.5 28.8+-00..0150 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 11 47 2.2 - 2 Standard Version 2 x 4 47 2.2 - 4 Standard Version 2 x 1.6 47 2.2 - 6 Standard Version 2 x 0.7 47 2.2 - 10 Standard Version 2 x 0.4 47 2.2 - 1 Medical Version (M5) 2 x 11 47 - 1 2 Medical Version (M5) 2 x 4 47 - 1 4 Medical Version (M5) 2 x 1.6 47 - 1 6 Medical Version (M5) 2 x 0.7 47 - 1 10 Medical Version (M5) 2 x 0.4 47 - 1 EMC Products 3

KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Diagrams Standard version Medical version (M5) L L’ L L’ L1 F1 L1 F1 1) 2) 1) 2) Cy PE PE’ PE R PE’ Cx Cx L2 F2 L2 F2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load Medical version (M5) protection class II L L’ L1 F1 1) 2) R Cx L2 F2 N N’ 1) Line 2) Load Derating Curves 1-pole 2-pole er att 2.0 er att 11..42 Admissible powacceptance in W 1100....50500 III === 10<2..<070 IIInnn 40 60 80 100 Admissible powacceptance in W 000010......2064080 III === 10<2..<070 IIInnn 40 60 80 100 Ambient air temperature Ta °C Ambient air temperature Ta °C Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 10 A 4 EMC Products

Power Entry Modules with Line Filter KMF https://www.schurter.com /PG06 Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated Current [A] Filter-Type Fuseholder Line Switch Protection Class Order Number 1 Standard Version 1-pole 2-pole I KMF1.1211.11 █ 2 Standard Version 1-pole 2-pole I KMF1.1221.11 █ 4 Standard Version 1-pole 2-pole I KMF1.1241.11 █ 6 Standard Version 1-pole 2-pole I KMF1.1261.11 █ 10 Standard Version 1-pole 2-pole I KMF1.1291.11 █ 1 Standard Version 2-pole 2-pole I KMF1.1111.11 █ 2 Standard Version 2-pole 2-pole I KMF1.1121.11 █ 4 Standard Version 2-pole 2-pole I KMF1.1141.11 █ 6 Standard Version 2-pole 2-pole I KMF1.1161.11 █ 10 Standard Version 2-pole 2-pole I KMF1.1191.11 █ 1 Medical Version (M5) 1-pole 2-pole I KMF1.1213.11 2 Medical Version (M5) 1-pole 2-pole I KMF1.1223.11 4 Medical Version (M5) 1-pole 2-pole I KMF1.1243.11 6 Medical Version (M5) 1-pole 2-pole I KMF1.1263.11 10 Medical Version (M5) 1-pole 2-pole II KMF0.2293.11 10 Medical Version (M5) 1-pole 2-pole I KMF1.1293.11 1 Medical Version (M5) 2-pole 2-pole II KMF0.2113.11 1 Medical Version (M5) 2-pole 2-pole I KMF1.1113.11 █ 2 Medical Version (M5) 2-pole 2-pole II KMF0.2123.11 2 Medical Version (M5) 2-pole 2-pole I KMF1.1123.11 █ 4 Medical Version (M5) 2-pole 2-pole II KMF0.2143.11 4 Medical Version (M5) 2-pole 2-pole I KMF1.1143.11 █ 6 Medical Version (M5) 2-pole 2-pole II KMF0.2163.11 6 Medical Version (M5) 2-pole 2-pole I KMF1.1163.11 █ 10 Medical Version (M5) 2-pole 2-pole II KMF0.2193.11 10 Medical Version (M5) 2-pole 2-pole I KMF1.1193.11 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 20 Pcs EMC Products 5

KMF Power Entry Modules with Line Filter https://www.schurter.com /PG06 Required Accessory Description Fusedrawer 2 Fusedrawer für Fuse Links 5x20 mm, with or without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0076 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KMF Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 IEC Connector C15 for hot conditions 120°C, Rewireable, Straight 4781 IEC Connector C15 for hot conditions 120°C, Rewireable, Angled 4784 8 Connector further types to KMF ... 01 2 7. 0 0. 3 The specifications, descriptions and illustrations indicated in this document are based on current 6 EMC Products information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S churter: KMF1.1193.11 KMF1.1123.11 KMF1.1211.11 KMF1.1143.11 KMF1.1161.11 KMF1.1213.11 KMF1.1291.11 KMF1.1191.11 KMF1.1261.11 KMF1.1111.11 KMF1.1121.1101 KMF1.1193.1103 KMF1.1113.11 KMF1.1121.11 KMF1.1123.1101 KMF1.1141.11 KMF1.1163.11 KMF1.1221.11 KMF1.1223.11 KMF1.1241.11 KMF1.1243.11 KMF1.1263.11 KMF1.1293.11 KMF8.0001 KMF1.1161.1101 KMF1.1123.1102 KMF1.1191.1102 KMF0.2143.11 KMF0.2193.11 KMF0.2163.11 KMF0.2123.11 KMF0.2113.11 KMF0.2293.11