Zener Diode KDZ series Data Sheet lApplication lDimensions (Unit : mm) lLand size figure (Unit : mm) Voltage regulation 0.1±0.1 1.2 1.6±0.1 　　　 0.05 5 8 0. lFeatures 5 0 3. 1) Small power mold type. (PMDU) ±0.1 ±0.20.12 2) High ESD tolerance ① 2.6 3.5±3.5 PMDU lStructure Cathode 0.9±0.1 0.8±0.1 ROHM : PMDU JEDEC : SOD-123 lConstruction Manufacture Date EX. KDZ10B Anode Silicon epitaxial planar lTaping specifications (Unit : mm) 4.0±0.1 2.0±0.05 φ11..5555 ± 00..0055 0.1 0.25±0.05 ± 5 7 1. 5 3.5±0.0 8.0±0.2 0.08 ±0.1 ±1 3.713.7 1.81±0.1 4.0±0.1 φ1.10. 0 ±0.10 .1 1.5MAX lAbsolute maximum ratings (Ta = 25°C) Parameter Symbol Limits Unit Power dissipation P 1000 mW Junction temperature Tj 150 °C Storage temperature Tstg -55 to +150 °C www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/6 2015.09 - Rev.I

KDZ series Data Sheet lElectrical characteristics (Ta= 25°C) Symbol Reverse current TYP. Zener voltage : V (V) Z : I (mA) R MIN. TYP. MAX. I (mA) MAX. V (V) Z R KDZ 3.6B 3.600 3.813 4.000 40.0 60.0 1.0 KDZ 3.9B 3.900 4.136 4.400 40.0 40.0 1.0 KDZ 4.3B 4.300 4.572 4.800 40.0 20.0 1.0 KDZ 4.7B 4.700 4.924 5.200 40.0 20.0 1.0 KDZ 5.1B 5.100 5.368 5.700 40.0 20.0 1.0 KDZ 5.6B 5.600 5.856 6.300 40.0 20.0 1.5 KDZ 6.2B 6.200 6.509 7.000 40.0 20.0 3.0 KDZ 6.8B 6.800 7.280 7.700 40.0 20.0 3.5 KDZ 7.5B 7.500 7.889 8.400 40.0 20.0 4.0 KDZ 8.2B 8.200 8.655 9.300 40.0 20.0 5.0 KDZ 9.1B 9.100 9.747 10.200 40.0 20.0 6.0 KDZ 10B 10.000 10.310 11.200 40.0 10.0 7.0 KDZ 11B 11.000 11.510 12.300 20.0 10.0 8.0 KDZ 12B 12.000 12.500 13.500 20.0 10.0 9.0 KDZ 13B 13.300 13.820 15.000 20.0 10.0 10.0 KDZ 15B 14.700 15.350 16.500 20.0 10.0 11.0 KDZ 16B 16.200 16.860 18.300 20.0 10.0 12.0 KDZ 18B 18.000 19.000 20.300 20.0 10.0 13.0 KDZ 20B 20.000 20.820 22.400 20.0 10.0 15.0 KDZ 22B 22.000 23.850 24.500 10.0 10.0 17.0 KDZ 24B 24.000 25.310 27.600 10.0 10.0 19.0 KDZ 27B 27.000 28.700 30.800 10.0 10.0 21.0 KDZ 30B 30.000 31.570 34.000 10.0 10.0 23.0 KDZ 33B 33.000 34.950 37.000 10.0 10.0 25.0 KDZ 36B 36.000 39.240 40.000 10.0 10.0 27.0 *The Zener voltage (Vz) is measured 40ms after power is supplied. lMARKING (TYPE NO.) TYPE TYPE　NO. TYPE TYPE　NO. KDZ　3.6B GB KDZ　12B VB KDZ　3.9B HB KDZ　13B WB KDZ　4.3B JB KDZ　15B XB KDZ　4.7B KB KDZ　16B YB KDZ　5.1B LB KDZ　18B ZB KDZ　5.6B MB KDZ　20B AD KDZ　6.2B NB KDZ　22B BD KDZ　6.8B PB KDZ　24B CD KDZ　7.5B QB KDZ　27B DD KDZ　8.2B RB KDZ　30B ED KDZ　9.1B SB KDZ　33B FD KDZ　10B TB KDZ　36B GD KDZ　11B UB 　 www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 2/6 2015.09 - Rev.I

KDZ series Data Sheet lElectrical characteristic curves 100 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 8.2 7.5 10 6.8 6.2 ) 5.6 A m 5.1 ( Z T : I 1 4.7 N 4.3 E R 3.9 R U C 3.6 R 0.1 E N E Z 0.01 0.001 0 5 10 15 20 25 30 35 40 45 ZENER VOLTAGE : V (V) Z V -I CHARACTERISTICS Z Z www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 3/6 2015.09 - Rev.I

KDZ series Data Sheet lElectrical characteristic curves 1200 10000 ) W 1000 M m U PRSM d( M) N : P 800 MAXIM(W 1000 t O S ERSI 600 URGE R : PR P S SE DI 400 S W 100 R ERPO E V W E 200 O R P 0 10 0 25 50 75 100 125 150 0.001 0.01 0.1 1 10 AMBIENT TEMPERATURE : Ta(°C) TIME : t(ms) Pd-Ta CHARACTERISTICS PRSM-TIME CHARACTERISTICS ) W 0.12 40 C/1000 Mounted on glass epoxy board (° IM=10mA IF=100mA C) 0.1 35 C) Rth %/° 0.08 30 mV/° E : time ( C CE : γZ 00..0046 25 E : γ(ZEDAN 100 1ms 300ms Rth(j-a) EN 20 NC MP FFICI 0.020 15 FICIE MAL I Rth(j-c) E 10 EF R 10 O -0.02 O E C C H MP. -0.04 5 MP. T T E N T -0.06 0 E E T SI -0.08 -5 N 1 A 0 10 20 30 40 R 0.001 0.01 0.1 1 10 100 1000 T ZENER VOLTAGE : V (V) TIME : t(s) Z γ -V CHARACTERISTICS Rth-t CHARACTERISTICS Z Z www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 4/6 2015.09 - Rev.I

KDZ27B Data Sheet lElectrical characteristic curves 100 1000 Ta = -25°C Ta = 150°C ) 100 A) 10 nA T : I(mZ 1 NT : I(R 10 Ta = 125°C N E 1 E R R R Ta = 75°C R U U 0.1 Ta = 25°C C 0.1 C E ER Ta = 75°C RS 0.01 Ta = 25°C N E E 0.01 Ta = 125°C V Z RE 0.001 Ta = 150°C Ta = -25°C 0.001 0.0001 26 27 28 29 30 31 32 33 0 5 10 15 20 25 ZENER VOLTAGE : V (V) REVERSE VOLTAGE : V (V) Z R V -I CHARACTERISTICS V -I CHARACTERISTICS Z Z R R 1000 28.9 f = 1MHz Ta=25°C I =10mA EN V) 28.8 AVE : 28.70V nZ=30pcs WEpF) V(Z ETCt( 100 E : B: G 28.7 E S A CL T NNA OL TAMI V 28.6 CIR 10 R AE E PT N CA ZE 28.5 1 28.4 0 5 10 15 20 25 REVERSE VOLTAGE : V (V) R V DISPERSION MAP V -Ct CHARACTERISTICS Z R www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 5/6 2015.09 - Rev.I

KDZ27B Data Sheet lElectrical characteristic curves 1 200 Ta=25°C Ta=25°C 0.9 190 A) 0.8 nV=R3=02p1cVs N 180 fV=1=M0HVz n E R (R E) n=10pcs NT : I 00..67 ETWCt(pF 116700 AVE : 150.1pF RE E BS : R 0.5 CL 150 U NA C 0.4 AN 140 E TMI RS 0.3 ACIER 130 E AVE : 0.098nA PT V 0.2 A 120 E C R 0.1 110 0 100 I DISPERSION MAP Ct DISPERSION MAP R 10000 30 No Break at 30kV ) W ) 25 ( V ZZ k E : 1000 C SD( C TIE 20 N AT A TS D SE E 100 OT 15 P RE M TG C MIC I ELEHAR 10 A 10 C N S Y DI 5 D C=200pF C=100pF C=150pF 1 0 R=0W R=1.5kW R=330W 0.1 1 10 ZENER CURRENT : I (mA) Z ESD DISPERSION MAP Z -I CHARACTERISTICS Z Z www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 6/6 2015.09 - Rev.I

DDaattaasshheeeett Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASSⅢ CLASSⅡb CLASSⅢ CLASSⅢ CLASSⅣ CLASSⅢ 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual ambient temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DDaattaasshheeeett Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label QR code printed on ROHM Products label is for ROHM’s internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice-PGA-E Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

DDaattaasshheeeett General Precaution 1. Before you use our Products, you are requested to carefully read this document and fully understand its contents. ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of a ny ROHM’s Products against warning, caution or note contained in this document. 2. All information contained in this document is current as of the issuing date and subj ect to change without any prior notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sale s representative. 3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all information contained in this document is accurate an d/or error-free. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or concerning such information. Notice – WE Rev.001 © 2015 ROHM Co., Ltd. All rights reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: R OHM Semiconductor: KDZTR27B