8-15 Watts C xppower.com D JTF Series - C D • High Power Density • Wide 4:1 Input Range • Operating Temperature -40 ºC to +85 ºC • Single & Dual Outputs • Standard Remote On/Off • 1600 VDC Isolation • 3 Year Warranty Specification Input General Input Voltage Range • 24 V (9-36 VDC) Efficiency • See tables 48 V (18-75 VDC) Isolation • 1600 VDC Input to Output Input Current • See table 1600 VDC Input to Case Input Filter • Pi network 1600 VDC Output to Case Input Reflected • 20 mA pk-pk through 12 µH inductor and Isolation Capacitance • 2000 pF max for JTF15, Ripple Current 47 µF capacitor, 5 Hz to 20 MHz 1500 pF max for others Input Surge • 24 V models: 50 VDC for 100 ms Switching Frequency • 330 kHz typical for JTF15, (1 second for 12 W versions) 270 kHz typical for others 48 V models: 100 VDC for 100 ms Power Density • JTF08: 20 W/in3, JTF10: 25 w/in3, (1 second for 12 W versions) JTF12: 30 W/in3, JTF15: 37.5 w/in3, MTBF • >1 MHrs to MIL-HDBK-217F at 25 °C, GB Output Environmental Output Voltage • See table Minimum Load • No minimum load required Operating Temperature • -40 °C to +85 °C, derate from 100% load Initial Set Accuracy • ±1.0% max for JTF15, ±1.2% for others at +60 °C to no load at +105 °C for 10 W, 12 W and 15 W versions and from 100% Start Up Delay • 20 ms typical load at 70 °C to no load at 105 °C for 8 W Line Regulation • ±0.2% max single, ±0.5% dual version Load Regulation • ±0.5% max single, ±1.0% max dual Case Temperature • +105 °C max Cross Regulation • ±5% on dual output models (see note 2) Storage Temperature • -40 °C to +125 °C Transient Response • <3% max deviation, recovery to within 1% Humidity • Up to 90%, non-condensing in 250 µs for a 25% load change Cooling • Natural convection Ripple & Noise • 85 mV pk-pk, 20 MHz bandwidth for JTF08, JTF10 and JTF12, 60 mV pk-pk EMC 20 MHz bandwidth for JTF15 (see note 3) Overload Protection • 150% of full load typical for JTF08 & JTF15, Emissions • EN55032 class A conducted with external 170% of full load typical for JTF10 & JTF12 components - see application note Overvoltage Protection • 3.3 V models: 3.9 V typical ESD Immunity • EN61000-4-2, level 3, Perf Criteria B 5 V models: 6.2 V typical Radiated Immunity • EN61000-4-3, 10 V/m Perf Criteria A 12 V models: 15 V typical EFT/Burst • EN61000-4-4, level 3 Perf Criteria B* 15 V models: 18 V typical Surge • EN61000-4-5, level 2 Perf Criteria B* ±5 V models: ±6.2 V typical ±12 V models: ±15 V typical Conducted Immunity • EN61000-4-6, 10 Vrms Perf Criteria A* ±15 V models: ±18 V typical Magnetic Field • EN61000-4-8, 1 A/m Perf Criteria A Short Circuit Protection • Trip & restart (hiccup) with auto recovery Maximum Capacitive • See table Safety Load Temperature • ±0.02/°C max Safety Approvals • UL60950-1 & UL62368-1 Coefficient (JTF08, JTF10,and JTF12 only) Remote On/Off • On: 3 to 12 VDC or open circuit * External input capacitor required, 330 µF/100 V. Off: <1.2 VDC or short circuit pins 1, 2 & 3

JTF08-15 D Models and Ratings C Input Current(1) Input Voltage Output Voltage Output Current No Load Full Load Max. Capacitive Load Efficiency Model Number - 3.3 V 2.0 A 10 mA 335 mA 1330 µF 83% JTF0824S3V3 D 5.0 V 1.5 A 10 mA 365 mA 1330 µF 86% JTF0824S05 12.0 V 0.665 A 15 mA 385 mA 288 µF 87% JTF0824S12 C 9-36 V 15.0 V 0.535 A 15 mA 385 mA 200 µF 87% JTF0824S15 ±5.0 V ±0.8 A 10 mA 400 mA ±900 µF 84% JTF0824D05 ±12.0 V ±0.335 A 15 mA 390 mA ±133 µF 86% JTF0824D12 ±15.0 V ±0.265 A 10 mA 385 mA ±90 µF 87% JTF0824D15 3.3 V 2.0 A 10 mA 170 mA 1330 µF 82% JTF0848S3V3 5.0 V 1.5 A 10 mA 185 mA 1330 µF 86% JTF0848S05 12.0 V 0.665 A 10 mA 195 mA 288 µF 87% JTF0848S12 18-75 V 15.0 V 0.535 A 10 mA 195 mA 200 µF 87% JTF0848S15 ±5.0 V ±0.8 A 10 mA 200 mA ±900 µF 84% JTF0848D05 ±12.0 V ±0.335 A 10 mA 195 mA ±133 µF 87% JTF0848D12 ±15.0 V ±0.265 A 10 mA 195 mA ±90 µF 87% JTF0848D15 3.3 V 2.7 A 15 mA 440 mA 1330 µF 85% JTF1024S3V3 5.0 V 2.0 A 15 mA 475 mA 1330 µF 87% JTF1024S05 12.0 V 0.833 A 15 mA 475 mA 288 µF 88% JTF1024S12 9-36 V 15.0 V 0.667 A 15 mA 480 mA 200 µF 88% JTF1024S15 ±5.0 V ±1.0 A 15 mA 495 mA ±900 µF 85% JTF1024D05 ±12.0 V ±0.417 A 15 mA 480 mA ±133 µF 87% JTF1024D12 ±15.0 V ±0.33 A 15 mA 480 mA ±90 µF 87% JTF1024D15 3.3 V 2.7 A 15 mA 225 mA 1330 µF 84% JTF1048S3V3 5.0 V 2.0 A 15 mA 240 mA 1330 µF 87% JTF1048S05 12.0 V 0.833 A 15 mA 240 mA 288 µF 87% JTF1048S12 18-75 V 15.0 V 0.667 A 15 mA 240 mA 200 µF 87% JTF1048S15 ±5.0 V ±1.0 A 15 mA 250 mA ±900 µF 85% JTF1048D05 ±12.0 V ±0.417 A 15 mA 245 mA ±133 µF 88% JTF1048D12 ±15.0 V ±0.33 A 15 mA 240 mA ±90 µF 88% JTF1048D15 3.3 V 3.5 A 15 mA 573 mA 2000 µF 87% JTF1224S3V3 5.0 V 2.4 A 15 mA 581 mA 2000 µF 89% JTF1224S05 12.0 V 1.0 A 15 mA 574 mA 430 µF 90% JTF1224S12 9-36 V 15.0 V 0.8 A 15 mA 574 mA 300 µF 90% JTF1224S15 ±5.0 V ±1.2 A 15 mA 595 mA ±1250 µF 87% JTF1224D05 ±12.0 V ±0.5 A 15 mA 574 mA ±200 µF 90% JTF1224D12 ±15.0 V ±0.4 A 15 mA 574 mA ±120 µF 90% JTF1224D15 3.3 V 3.5 A 15 mA 286 mA 2000 µF 87% JTF1248S3V3 5.0 V 2.4 A 15 mA 290 mA 2000 µF 89% JTF1248S05 12.0 V 1.0 A 15 mA 287 mA 430 µF 90% JTF1248S12 18-75 V 15.0 V 0.8 A 15 mA 287 mA 300 µF 90% JTF1248S15 ±5.0 V ±1.2 A 15 mA 297 mA ±1250 µF 87% JTF1248D05 ±12.0 V ±0.5 A 15 mA 287 mA ±200 µF 90% JTF1248D12 ±15.0 V ±0.4 A 15 mA 287 mA ±120 µF 90% JTF1248D15 3.3 V 4.0 A 10 mA 647 mA 4700 µF 87% JTF1524S3V3 5.1 V 3.0 A 10 mA 732 mA 3300 µF 89% JTF1524S05 12.0 V 1.25 A 10 mA 710 mA 600 µF 90% JTF1524S12 9-36 V 15.0 V 1.0 A 10 mA 710 mA 400 µF 90% JTF1524S15 ±5.0 V ±1.5 A 10 mA 744 mA ±1500 µF 86% JTF1524D05 ±12.0 V ±0.625 A 10 mA 718 mA ±288 µF 89% JTF1524D12 ±15.0 V ±0.5 A 10 mA 710 mA ±200 µF 90% JTF1524D15 3.3 V 4.0 A 5 mA 327 mA 4700 µF 86% JTF1548S3V3 5.1 V 3.0 A 5 mA 370 mA 3300 µF 88% JTF1548S05 12.0 V 1.25 A 5 mA 355 mA 600 µF 90% JTF1548S12 18-75 V 15.0 V 1.0 A 5 mA 359 mA 400 µF 89% JTF1548S15 ±5.0 V ±1.5 A 5 mA 372 mA ±1500 µF 86% JTF1548D05 ±12.0 V ±0.625 A 5 mA 359 mA ±288 µF 89% JTF1548D12 ±15.0 V ±0.5 A 5 mA 355 mA ±200 µF 90% JTF1548D15 Notes 1. Input current measured at nominal 24 V and 48 V input. 3. Measured with 1 µF ceramic capacitor across output rails. 2. When one output is set to 100% load & the other varies between 25% & 100% load. Mechanical Details 1.25 0.08 0.90 (31.75) (2.00) (22.86) Notes Pin Connections 12 3 9 11 1. All dimensions are in inches (mm) Pin Single Dual (200..8302) (00D..05IA20) Bottom View (105..6204) 23.. WPieni gdhiat:m0e.0te4r :l b0s.0 (21 8± 0g.)0. 1052W (0:. 50 .±040 .(0250) g) 12 Remo-tVe inOn/Off Remo-tVe inOn/Off 0 4. Pin pitch tolerance: ±0.014 (±0.35) 3 -Vin -Vin 23 22 16 14 5. Case tolerance: ±0.02 (±0.5) 9 No Pin Common 11 Not Connected -Vout 6. Package: 24 pin DIL nickel-coated copper. 0.10 0.20 14 +Vout +Vout (2.54) (5.0 8) 16 -Vout Common 0.40 ( 1 0 . 1 6 ) 22 +Vin +Vin 23 +Vin +Vin 0.12 ( 3 . 0 5 ) M i n . N 0 Application No t e s Derating Curve 100 Input Filter Remote On/Off Load (%)468000 10, 12 & 15 W 8 W + 2.2 µ1F2 µH2.2 µF +VinCDonCv/eDr+CteVrout LOAD SOOtuuattnppduuatt rOOd nfRf:: O3< F1t o.l2o 1Vg2Dic VC iDs o Cpr oossrh itooivrptee cni rcciurcitu pitins 1, 2 & 3 20 0 - -Vin -Vout -40 -20 0 10 20 30 40 50 60 70 80 90 105 Ambient Temperature (ºC) 17 March 20