C 10 Watts xppower.com D JHM10 Series - C D • International Medical Approvals • 4000 VAC Reinforced Insulation • Meets IEC60601-1 • 2 µA Patient Leakage Current • DIP-24 Package • EN55011 Level A With No External Components • 3 Year Warranty Specification Input General Input Voltage Range • 5 V (4.5-9 VDC) Efficiency • See tables 12 V (9-18 VDC) Isolation • 4000 VAC for 1 min. double/reinforced with 24 V (18-36 VDC) a working voltage of 250 VAC. Meets 2 x Input Current • See table MOPP per 3rd edition of IEC60601-1 Inrush Current • 20 A max at 36 V 5000 VAC for 10 ms in accordance with IEC60664-1 Input Filter • Pi network Input to Output • 20 pF max Patient Leakage • 2 µA max Capacitance Current Switching Frequency • 80 kHz to 1.2 MHz variable Undervoltage Lockout • 5 V models, on at >4.4 V, off <4.2 V 12 V models, on at >8.8 V, off <8.3 V Power Density • 20.0 W/in3 24 V models, on at >17.5 V, off <17.0 V MTBF • >1 MHrs typical to MIL-STD-217F Input Surge • 5 V models 15 V for 3 s at 25 °C, GB 12 V models 25 V for 3 s Environmental 24 V models 50 V for 3 s Operating Temperature • -40 °C to +80 °C, see derating curve Output Case Temperature • +100 °C max Storage Temperature • -40 °C to +100 °C Output Voltage • See table Operating Humidity • 5-90%, non-condensing Output Voltage Trim • ±10% Cooling • Natural convection Minimum Load • No minimum load required Initial Set Accuracy • ±1% max on +Vout, ±2% max on -Vout EMC & Safety Start Up Delay • 5 ms typical Start Up Rise Time • 2 ms typical Emissions • EN55011 & EN55032 level A conducted & radiated with no external components Line Regulation • ±0.3% max Immunity • IEC60601-1-2, EN61204-3 Load Regulation • ±2% max 0% to 10% load, ±1% max 10% to 100% load ESD Immunity • EN61000-4-2, level 2, Perf Criteria A Cross Regulation • ±4% max on dual with one output set to Radiated Immunity • EN61000-4-3, 10 V/m Perf Criteria A 50% load and the other varied from EFT/Burst • EN61000-4-4, level 2 Perf Criteria A 10% to 100% load (D05 is 20% to 100%) Surge • EN61000-4-5, level 1 Perf Criteria A Transient Response • 4% max deviation, recovery to within 1% Conducted Immunity • EN61000-4-6, 10 Vm, Perf Criteria A in <500 µs for a 50% load change at Magnetic Field • EN61000-4-8, 3 A/m Perf Criteria A 0.25 A/µs rate Safety Approvals • ANSI/AMMI ES60601-1 Ripple & Noise • 1% pk-pk max at 20 MHz bandwidth CSA-22.2 No.60601-1 Overload Protection • 120% - 200%, trip and restart IEC60601-1 Overvoltage Protection • 115% - 140% Temperature • ±0.03/°C max Coefficient Short Circuit Protection • Trip and Restart (hiccup mode), auto recovery

JHM10 D Models and Ratings C Input Current Maximum Input Voltage Output Voltage Output Current Efficiency(3) Model Number - No Load(1) Full Load(2) Capacitive Load D 5.0 V 2000 mA 100 mA 2690 mA 2200 µF 83.5% JHM1005S05 12.0 V 833 mA 115 mA 2640 mA 1000 µF 85.0% JHM1005S12 C 15.0 V 666 mA 115 mA 2640 mA 680 µF 85.0% JHM1005S15 4.5-9 V ±5.0 V ±1000 mA 130 mA 2760 mA ±1000 µF 81.5% JHM1005D05 ±12.0 V ±420 mA 115 mA 2695 mA ±470 µF 84.0% JHM1005D12 ±15.0 V ±333 mA 115 mA 2670 mA ±470 µF 84.0% JHM1005D15 5.0 V 2000 mA 50 mA 1310 mA 2200 µF 86.0% JHM1012S05 12.0 V 833 mA 50 mA 1280 mA 1000 µF 88.0% JHM1012S12 15.0 V 666 mA 50 mA 1265 mA 680 µF 89.0% JHM1012S15 9-18 V ±5.0 V ±1000 mA 50 mA 1345 mA ±1000 µF 84.0% JHM1012D05 ±12.0 V ±420 mA 50 mA 1290 mA ±470 µF 88.0% JHM1012D12 ±15.0 V ±333 mA 50 mA 1280 mA ±470 µF 88.0% JHM1012D15 5.0 V 2000 mA 25 mA 645 mA 2200 µF 87.0% JHM1024S05 12.0 V 833 mA 20 mA 630 mA 1000 µF 89.0% JHM1024S12 15.0 V 666 mA 20 mA 630 mA 680 µF 89.0% JHM1024S15 18-36 V ±5.0 V ±1000 mA 20 mA 660 mA ±1000 µF 85.0% JHM1024D05 ±12.0 V ±420 mA 25 mA 640 mA ±470 µF 88.0% JHM1024D12 ±15.0 V ±333 mA 25 mA 635 mA ±470 µF 88.0% JHM1024D15 Notes 1. Input current measured at nominal input voltage. 3. Typical values. 2. Input current measured at lowest input voltage. Mechanical Details (311.2.755 ) (05..2008) (20..1504) Pin Connections Pin Single Dual 14 16 22 23 2 -Vin -Vin 3 -Vin -Vin 0.80 Bottom View (105..6204) 9 No Pin Common 0Vout (20.32) 10 Trim Trim 11 10 9 3 2 11 No Pin -Vout 14 +Vout +Vout 16 -Vout Common 0Vout (04..1587) (202.9.806 ) 22 +Vin +Vin 230 + V 1in +Vin 1 Pin diameter: 0.02 ±0.002 (0.5 ±0.05) 2 3 2 Pin pitch tolerance: ±0.014 (±0.35)Notes Notes: 0.50 ( 1 2 . 7 ) 1 . P 3in d iCamaesteer: T0o.0l2e ±ra0.n00c2e (:0 .±5 0±0.0.025 )(±0.5) 1. All dimensions are in inches (mm) 2. Pin pitch tolerance: ±0.01 (±0.25) 2. Weight:0.04 lbs (20 g) approx. 3. Case Tolerance: ±0.02 (±0.5) 3. Pin diameter: 0.02 ±0.002 (0.5 ±0.05) 4. Pin pitch tolerance: ±0.01 (±0.25) 0.15 (3.8) Min. 5. Case tolerance: ±0.02 (±0.5) Application Notes Derating Curve External Output Trim 1 Pin diameter: 01.002 ±0.002 (0.5 ±0.05) 2 Pin pitch tolerance: ±0.014 (±0.35) 1 Trim + Vout 3 Case Tolerance:8 ±0.02 (±0.5) 2 Trim Up Trim Down 3 W) 6 d ( -Vout Trim a Lo 4 0 For 5 V output: For ±5 V output: 2 Trim +10%, R = 3.4 k typical Trim +10%, R = 12.0 k typical Trim -10%, R = 1 k typical Trim -10%, R = 8.0 k typical 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 For 12 V output: For ±12 V output: Ambient Temperature (°C) Trim +10%, R = 5.9 k typical Trim +10%, R = 12.8 k typical Trim -10%, R = 11.3 k typical Trim -10%, R = 9.5 k typical 1 JHM1012/24 S05, S12,S15, D12, D15 For 15 V output: For ±15 V output: 2 JHM1012/24 D05, JHM1005S05, S12, S15, D12, D15 Trim +10%, R = 8.3 k typical Trim +10%, R = 18 k typical 3 JHM1005D05 Trim -10%, R = 10 k typical Trim -10%, R = 14.8 k typical 01 Oct 18 0 A

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: X P Power: JHM1012S05 JHM1005S05 JHM1005D05 JHM1024S12 JHM1024S15 JHM1005S15 JHM1024D15 JHM1005D12 JHM1012D05 JHM1024D05 JHM1012S15 JHM1012D15 JHM1024D12 JHM1005D15 JHM1012S12 JHM1012D12 JHM1024S05 JHM1005S12