IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY • Dynamic dV/dt Rating V (V) 100 DS • Repetitive Avalanche Rated RDS(on) () VGS = 5.0 V 0.27 • Surface Mount (IRLR120, SiHLR120) Q (Max.) (nC) 12 g • Straight Lead (IRLU120, SiHLU120) Q (nC) 3.0 gs • Available in Tape and Reel Q (nC) 7.1 gd • Logic-Level Gate Drive Configuration Single • R Specified at V = 4 V and 5 V DS(on) GS D • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DPAK IPAK DESCRIPTION (TO-252) (TO-251) D Third generation power MOSFETs from Vishay provide the D G designer with the best combination of fast switching, ruggedized device design, low on-resistance and S cost-effectiveness. G GD S The DPAK is designed for surface mounting using vapor S phase, infrared, or wave soldering techniques. The straight N-Channel MOSFET lead version (IRLU, SiHLU series) is for through-hole mounting applications. Power dissipation levels up to 1.5 W are possible in typical surface mount applications. ORDERING INFORMATION Package DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) IPAK (TO-251) Lead (Pb)-free and Halogen-free SiHLR120-GE3 SiHLR120TRL-GE3 SiHLR120TR-GE3 SiHLR120TRR-GE3 SiHLU120-GE3 IRLR120PbF IRLR120TRLPbFa IRLR120TRPbFa IRLR120TRRPbFa IRLU120PbF Lead (Pb)-free SiHLR120-E3 SiHLR120TL-E3a SiHLR120T-E3a SiHLR120TR-E3a SiHLU120-E3 Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS (T = 25 °C, unless otherwise noted) C PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V 100 DS V Gate-Source Voltage V ± 10 GS T = 25 °C 7.7 C Continuous Drain Current V at 5.0 V I GS D T = 100 °C 4.9 A C Pulsed Drain Currenta I 31 DM Linear Derating Factor 0.33 W/°C Linear Derating Factor (PCB Mount)e 0.020 Single Pulse Avalanche Energyb E 210 mJ AS Repetitive Avalanche Currenta I 7.7 A AR Repetitive Avalanche Energya E 4.2 mJ AR Maximum Power Dissipation T = 25 °C 42 C P W Maximum Power Dissipation (PCB Mount)e T = 25 °C D 2.5 A Peak Diode Recovery dV/dtc dV/dt 5.5 V/ns Operating Junction and Storage Temperature Range T , T - 55 to + 150 J stg °C Soldering Recommendations (Peak Temperature)d for 10 s 260 Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 25 V, starting TJ = 25 °C, L = 5.3 mH, Rg = 25 , IAS = 7.7 A (see fig. 12). c. ISD  9.2 A, dI/dt  110 A/μs, VDD  VDS, TJ  150 °C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). S13-0167-Rev. D, 04-Feb-13 1 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL MIN. TYP. MAX. UNIT Maximum Junction-to-Ambient R - - 110 thJA Maximum Junction-to-Ambient R - - 50 °C/W (PCB Mount)a thJA Maximum Junction-to-Case (Drain) R - - 3.0 thJC Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS (T = 25 °C, unless otherwise noted) J PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage V V = 0 V, I = 250 μA 100 - - V DS GS D VDS Temperature Coefficient VDS/TJ Reference to 25 °C, ID = 1 mA - 0.13 - V/°C Gate-Source Threshold Voltage V V = V , I = 250 μA 1.0 - 2.0 V GS(th) DS GS D Gate-Source Leakage I V = ± 10 V - - ± 100 nA GSS GS V = 100 V, V = 0 V - - 25 DS GS Zero Gate Voltage Drain Current I μA DSS V = 80 V, V = 0 V, T = 125 °C - - 250 DS GS J V = 5.0 V I = 4.6 Ab - - 0.27 GS D Drain-Source On-State Resistance RDS(on) V = 4.0 V I = 3.9 Ab - - 0.38  GS D Forward Transconductance g V = 50 V, I = 4.6 Ab 4.4 - - S fs DS D Dynamic Input Capacitance C - 490 - iss V = 0 V, GS Output Capacitance C V = 25 V, - 150 - pF oss DS f = 1.0 MHz, see fig. 5 Reverse Transfer Capacitance C - 30 - rss Total Gate Charge Q - - 12 g I = 9.2 A, V = 80 V, Gate-Source Charge Q V = 5.0 V D DS - - 3.0 nC gs GS see fig. 6 and 13b Gate-Drain Charge Q - - 7.1 gd Turn-On Delay Time t - 9.8 - d(on) Rise Time tr VDD = 50 V, ID = 9.2 A, - 64 - ns Turn-Off Delay Time td(off) Rg = 9.0 , RD = 5.2 , see fig. 10b - 21 - Fall Time t - 27 - f Internal Drain Inductance L Between lead, D - 4.5 - D 6 mm (0.25") from package and center of nH Internal Source Inductance L die contactc G - 7.5 - S S Drain-Source Body Diode Characteristics MOSFET symbol Continuous Source-Drain Diode Current IS showing the D - - 7.7 integral reverse A G Pulsed Diode Forward Currenta ISM p - n junction diode - - 31 S Body Diode Voltage V T = 25 °C, I = 7.7 A, V = 0 Vb - - 2.5 V SD J S GS Body Diode Reverse Recovery Time t - 110 140 ns rr T = 25 °C, I = 9.2 A, dI/dt = 100 A/μsb J F Body Diode Reverse Recovery Charge Q - 0.80 1.0 μC rr Forward Turn-On Time t Intrinsic turn-on time is negligible (turn-on is dominated by L and L ) on S D Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width  300 μs; duty cycle  2 %. S13-0167-Rev. D, 04-Feb-13 2 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics, T = 25 °C Fig. 3 - Typical Transfer Characteristics C Fig. 2 - Typical Output Characteristics, T = 150 °C Fig. 4 - Normalized On-Resistance vs. Temperature C S13-0167-Rev. D, 04-Feb-13 3 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 8 - Maximum Safe Operating Area S13-0167-Rev. D, 04-Feb-13 4 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix R D V DS V GS D.U.T. R g + -VDD 5.0 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit V DS 90 % 10 % V GS t t t t d(on) r d(off) f Fig. 9 - Maximum Drain Current vs. Case Temperature Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case S13-0167-Rev. D, 04-Feb-13 5 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix L V V DS DS Vary tp to obtain tp required I AS V DD Rg D.U.T + V - DD V DS I AS 5.0 V t 0.01 Ω p I AS Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. Q 50 kΩ G VGS 12 V 0.2 µF 0.3 µF QGS QGD + V D.U.T. - DS V G V GS 3 mA Charge I I G D Current sampling resistors Fig. 13a - Basic Gate Charge Waveform Fig. 13b - Gate Charge Test Circuit S13-0167-Rev. D, 04-Feb-13 6 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IRLR120, IRLU120, SiHLR120, SiHLU120 www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + Circuit layout considerations D.U.T. • Low stray inductance • Ground plane • Low leakage inductance current transformer - + - + - Rg • dV/dt controlled by Rg + • Driver same type as D.U.T. V - DD • ISD controlled by duty factor “D” • D.U.T. - device under test Driver gate drive P.W. Period D = P.W. Period V = 10 Va GS D.U.T. l waveform SD Reverse recovery Body diode forward current current dI/dt D.U.T. V waveform DS Diode recovery dV/dt V DD Re-applied voltage Body diode forward drop Inductor current Ripple ≤ 5 % ISD Note a. V = 5 V for logic level devices GS Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91324. S13-0167-Rev. D, 04-Feb-13 7 Document Number: 91324 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Package Information www.vishay.com Vishay Siliconix TO-252AA Case Outline E A MILLIMETERS INCHES C2 b3 DIM. MIN. MAX. MIN. MAX. 3 A 2.18 2.38 0.086 0.094 L A1 - 0.127 - 0.005 b 0.64 0.88 0.025 0.035 b2 0.76 1.14 0.030 0.045 D b3 4.95 5.46 0.195 0.215 H C 0.46 0.61 0.018 0.024 C2 0.46 0.89 0.018 0.035 L4 5 D 5.97 6.22 0.235 0.245 L L m) D1 4.10 - 0.161 - m 5 E 6.35 6.73 0.250 0.265 0. b b2 ght ( C E1 4.32 - 0.170 - e ei H 9.40 10.41 0.370 0.410 h A1 e1 ne e 2.28 BSC 0.090 BSC a pl e1 4.56 BSC 0.180 BSC e g a L 1.40 1.78 0.055 0.070 g L3 0.89 1.27 0.035 0.050 1 D L4 - 1.02 - 0.040 L5 1.01 1.52 0.040 0.060 ECN: T16-0236-Rev. P, 16-May-16 DWG: 5347 E1 Notes • Dimension L3 is for reference only. Revision: 16-May-16 1 Document Number: 71197 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Package Information Vishay Siliconix TO-251AA (HIGH VOLTAGE) 4 3 A E1 Thermal PAD E A 4 b4 0.0100.25 M C A B c2 L2 4 A θ2 θ1 D1 4 B D 3 C Seating 5 plane L1 L3 C C (Datum A) L B B A A1 3 x b2 c 3 x b View A - A 2 x e 0.0100.25 M C A B Base 5 metal Plating b1, b3 Lead tip (c) c1 5 (b, b2) Section B - B and C - C MILLIMETERS INCHES MILLIMETERS INCHES DIM. MIN. MAX. MIN. MAX. DIM. MIN. MAX. MIN. MAX. A 2.18 2.39 0.086 0.094 D1 5.21 - 0.205 - A1 0.89 1.14 0.035 0.045 E 6.35 6.73 0.250 0.265 b 0.64 0.89 0.025 0.035 E1 4.32 - 0.170 - b1 0.65 0.79 0.026 0.031 e 2.29 BSC 2.29 BSC b2 0.76 1.14 0.030 0.045 L 8.89 9.65 0.350 0.380 b3 0.76 1.04 0.030 0.041 L1 1.91 2.29 0.075 0.090 b4 4.95 5.46 0.195 0.215 L2 0.89 1.27 0.035 0.050 c 0.46 0.61 0.018 0.024 L3 1.14 1.52 0.045 0.060 c1 0.41 0.56 0.016 0.022 θ1 0' 15' 0' 15' c2 0.46 0.86 0.018 0.034 θ2 25' 35' 25' 35' D 5.97 6.22 0.235 0.245 ECN: S-82111-Rev. A, 15-Sep-08 DWG: 5968 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Dimension are shown in inches and millimeters. 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.13 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body. 4. Thermal pad contour optional with dimensions b4, L2, E1 and D1. 5. Lead dimension uncontrolled in L3. 6. Dimension b1, b3 and c1 apply to base metal only. 7. Outline conforms to JEDEC outline TO-251AA. Document Number: 91362 www.vishay.com Revision: 15-Sep-08 1

Application Note 826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 (5.690) 3 0) 4 8 2 1 0. 6. ( 0.420 10.668) ( 7 2) 8 0 0 2 0. 2. ( 0 6) 9 8 0 2 0. 2. ( 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Return to Index A P P L I C A T I O N N O T E Document Number: 72594 www.vishay.com Revision: 21-Jan-08 3

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: IRLR120TRPBF IRLR120TRLPBF IRLR120TRRPBF IRLR120 IRLR120TR IRLR120TRL IRLR120PBF IRLU120PBF SIHLR120-GE3