PD - 95488A IRF2807ZPbF IRF2807ZSPbF Features IRF2807ZLPbF (cid:0) Advanced Process Technology HEXFET® Power MOSFET (cid:0) Ultra Low On-Resistance (cid:0) Dynamic dv/dt Rating D (cid:0) 175°C Operating Temperature V = 75V (cid:0) Fast Switching DSS (cid:0) Repetitive Avalanche Allowed up to Tjmax (cid:0) Lead-Free RDS(on) = 9.4mΩ G Description ID = 75A S This HEXFET® Power MOSFET utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this design are a 175°C junction operating temperature, fast switching speed and improved repetitive avalanche rating. These features combine to make this design an extremely efficient and reliable device for use in a wide variety of applications. TO-220AB D2Pak TO-262 IRF2807ZPbF IRF2807ZSPbF IRF2807ZLPbF Absolute Maximum Ratings Parameter Max. Units ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 89 A ID @ TC = 100°C Continuous Drain Current, VGS @ 10V (See Fig. 9) 63 ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Package Limited) 75 IDM Pulsed Drain Current (cid:0) 350 PD @TC = 25°C Maximum Power Dissipation 170 W Linear Derating Factor 1.1 W/°C VGS Gate-to-Source Voltage ± 20 V EAS Single Pulse Avalanche Energy (Thermally Limited) (cid:1) 160 mJ EAS (tested) Single Pulse Avalanche Energy Tested Value (cid:2) 200 IAR Avalanche Current (cid:0) See Fig.12a,12b,15,16 A EAR Repetitive Avalanche Energy (cid:3) mJ TJ Operating Junction and -55 to + 175 °C TSTG Storage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case ) Mounting torque, 6-32 or M3 screw 10 lbf•in (1.1N•m) Thermal Resistance Parameter Typ. Max. Units RθJC Junction-to-Case ––– 0.90 °C/W RθCS Case-to-Sink, Flat, Greased Surface 0.50 ––– RθJA Junction-to-Ambient ––– 62 RθJA Junction-to-Ambient (PCB Mount, steady state)(cid:4) ––– 40 HEXFET® is a registered trademark of International Rectifier. www.irf.com 1 (cid:1)(cid:2)(cid:3)(cid:4)(cid:4)(cid:3)(cid:5)(cid:1)

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) Static @ T = 25°C (unless otherwise specified) J Parameter Min. Typ. Max. Units Conditions V(BR)DSS Drain-to-Source Breakdown Voltage 75 ––– ––– V VGS = 0V, ID = 250µA ∆ΒVDSS/∆TJ Breakdown Voltage Temp. Coefficient ––– 0.073 ––– V/°C Reference to 25°C, ID = 1mA RDS(on) Static Drain-to-Source On-Resistance ––– 7.5 9.4 mΩ VGS = 10V, ID = 53A (cid:2) VGS(th) Gate Threshold Voltage 2.0 ––– 4.0 V VDS = VGS, ID = 250µA gfs Forward Transconductance 67 ––– ––– S V = 25V, I = 53A DS D IDSS Drain-to-Source Leakage Current ––– ––– 20 µA VDS = 75V, VGS = 0V ––– ––– 250 V = 75V, V = 0V, T = 125°C DS GS J IGSS Gate-to-Source Forward Leakage ––– ––– 200 nA VGS = 20V Gate-to-Source Reverse Leakage ––– ––– -200 V = -20V GS Qg Total Gate Charge ––– 71 110 nC ID = 53A Qgs Gate-to-Source Charge ––– 19 29 VDS = 60V Qgd Gate-to-Drain ("Miller") Charge ––– 28 42 VGS = 10V (cid:2) td(on) Turn-On Delay Time ––– 18 ––– ns VDD = 38V tr Rise Time ––– 79 ––– ID = 53A td(off) Turn-Off Delay Time ––– 40 ––– RG = 6.2Ω tf Fall Time ––– 45 ––– VGS = 10V (cid:2) LD Internal Drain Inductance ––– 4.5 ––– nH Between lead, D 6mm (0.25in.) LS Internal Source Inductance ––– 7.5 ––– from package G and center of die contact S Ciss Input Capacitance ––– 3270 ––– pF VGS = 0V Coss Output Capacitance ––– 420 ––– VDS = 25V Crss Reverse Transfer Capacitance ––– 240 ––– ƒ = 1.0MHz, See Fig. 5 Coss Output Capacitance ––– 1590 ––– VGS = 0V, VDS = 1.0V, ƒ = 1.0MHz Coss Output Capacitance ––– 280 ––– VGS = 0V, VDS = 60V, ƒ = 1.0MHz Coss eff. Effective Output Capacitance ––– 440 ––– VGS = 0V, VDS = 0V to 60V Diode Characteristics Parameter Min. Typ. Max. Units Conditions IS Continuous Source Current ––– ––– 89 MOSFET symbol D (Body Diode) A showing the ISM Pulsed Source Current ––– ––– 350 integral reverse G (Body Diode)(cid:0)(cid:1) p-n junction diode. S VSD Diode Forward Voltage ––– ––– 1.3 V TJ = 25°C, IS = 53A, VGS = 0V (cid:2) trr Reverse Recovery Time ––– 46 69 ns TJ = 25°C, IF = 53A, VDD = 25V Qrr Reverse Recovery Charge ––– 80 120 nC di/dt = 100A/µs (cid:2) ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) (cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6) (cid:1) Repetitive rating; pulse width limited by (cid:5)Coss eff. is a fixed capacitance that gives the same charging time max. junction temperature. (See fig. 11). as Coss while VDS is rising from 0 to 80% VDSS . (cid:2) (cid:6)Limited by TJmax, starting TJ = 25°C, L = 0.12mH, (cid:6)Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive RG = 25Ω, IAS = 53A, VGS =10V. Part not avalanche performance. recommended for use above this value. (cid:7)This value determined from sample failure population. 100% (cid:3) ISD ≤ 53A, di/dt ≤ 420A/µs, VDD ≤ V(BR)DSS, tested to this value in production. TJ ≤ 175°C. (cid:8)This is applied to D2Pak, when mounted on 1" square PCB (cid:4) Pulse width ≤ 1.0ms; duty cycle ≤ 2%. ( FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. 2 www.irf.com

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) 1000 1000 VGS VGS TOP 15V TOP 15V 10V 10V Aen()t 100 8765....0005VVVV Aen()t 8765....0005VVVV Curr 10 BOTTOM 54..05VV Curr 100 BOTTOM 54..05VV e e c c ur ur o o S S o- 1 o- an-ti 4.5V an-ti 10 4.5V Dr Dr ,D 0.1 ,D I I 20µs PULSE WIDTH 20µs PULSE WIDTH Tj = 25°C Tj = 175°C 0.01 1 0.1 1 10 100 1000 0.1 1 10 100 1000 VDS, Drain-to-Source Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 1000 150 Α()uenrrt 100 TJ = 175°C Saneucc()t 110205 TJ = 25°C C d e on c c ur 10 ns 75 o a Sano--ti TJ = 25°C wTadrr 50 TJ = 175°C Dr 1 or I, D VDS = 25V GF, sf 25 20µs PULSE WIDTH 0.1 0 4 6 8 10 12 0 25 50 75 100 125 150 VGS, Gate-to-Source Voltage (V) ID,Drain-to-Source Current (A) Fig 3. Typical Transfer Characteristics Fig 4. Typical Forward Transconductance vs. Drain Current www.irf.com 3

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) 100000 12.0 VGS = 0V, f = 1 MHZ I = 53A C = C + C , C SHORTED D iss gs gd ds Crss = Cgd V) 10.0 VDS= 60V 10000 Coss = Cds + Cgd ge( VDS= 38V Fpaanepcc()ti1000 CCCrosisssss VSooaouec-rt l 68..00 VDS= 15V CCa, Gae-tt 4.0 100 , S G V 2.0 10 0.0 1 10 100 0 10 20 30 40 50 60 70 80 VDS, Drain-to-Source Voltage (V) QG Total Gate Charge (nC) Fig 5. Typical Capacitance vs. Fig 6. Typical Gate Charge vs. Drain-to-Source Voltage Gate-to-Source Voltage 1000 10000 OPERATION IN THIS AREA LIMITED BY R (on) A) A)1000 DS n(t 100 TJ = 175°C n( t e e urr urr C C100 n e Dari 10 oucr 100µsec e S evsr no--t 10 Re ,DS 1 TJ = 25°C Dar, iD 1 Tc = 25°C 1msec I I Tj = 175°C 10msec VGS = 0V Single Pulse 0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1 10 100 1000 VSD, Source-to-Drain Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Fig 8. Maximum Safe Operating Area Forward Voltage 4 www.irf.com

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) 100 2.5 90 Limited By Package nec ID = 53A 80 assti VGS = 10V e 2.0 R A) 70 n CDnuenarr(r t iI,D 123456000000 ODSanoouecr--rt , iRDSon() mNoedaz(r) li 11..05 0 0.5 25 50 75 100 125 150 175 -60 -40 -20 0 20 40 60 80 100120140160180 TC , Case Temperature (°C) TJ , Junction Temperature (°C) Fig 9. Maximum Drain Current vs. Fig 10. Normalized On-Resistance Case Temperature vs. Temperature 10 )C 1 J h t D = 0.50 Z e( 0.20 s n o 0.1 0.10 p es 0.05 R a l 0.02 m 0.01 er 0.01 h T SINGLE PULSE Notes: ( THERMAL RESPONSE ) 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) 15V 300 mJ) ID y( 250 TOP 22A VDS L DRIVER egr 38A En BOTTOM53A e 200 RG D.U.T + hc IAS - VDDA aanl 2V0GVS tp 0.01Ω Aev 150 s ul P 100 e Fig 12a. Unclamped Inductive Test Circuit gl n Si V(BR)DSS ,S 50 tp EA 0 25 50 75 100 125 150 175 Starting TJ , Junction Temperature (°C) IAS Fig 12c. Maximum Avalanche Energy Fig 12b. Unclamped Inductive Waveforms vs. Drain Current Q G (cid:1)(cid:2)(cid:3)(cid:4) Q Q GS GD 5.0 V G V) e( ag 4.0 Charge Votl d ol I = 250µA Fig 13a. Basic Gate Charge Waveform ehs 3.0 D hr SaCmuerreTnytpeReagsulDat.oUr.T. Geat t h) 2.0 50KΩ S(t 12V .2µF G .3µF V + D.U.T. -VDS 1.0 -75 -50 -25 0 25 50 75 100 125 150 175 200 VGS T , Temperature ( °C ) J 3mA IG ID CurrentSamplingResistors Fig 14. Threshold Voltage vs. Temperature Fig 13b. Gate Charge Test Circuit 6 www.irf.com

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) 1000 Duty Cycle = Single Pulse 100 Allowed avalanche Current vs Aen()t 0.01 aavsasulamncinhge ∆pTuj l=se 2w5id°Cth , dueta vto urr avalanche losses C 10 0.05 e h 0.10 c n a al v A 1 0.1 1.0E-08 1.0E-07 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 tav (sec) Fig 15. Typical Avalanche Current vs.Pulsewidth 200 Notes on Repetitive Avalanche Curves , Figures 15, 16: TOP Single Pulse (For further info, see AN-1005 at www.irf.com) BOTTOM 10% Duty Cycle 1. Avalanche failures assumption: J) ID = 53A Purely a thermal phenomenon and failure occurs at a my( 150 etevmerpye praatrut rtey pfaer. in excess of Tjmax. This is validated for g er 2. Safe operation in Avalanche is allowed as long asTjmax is n E not exceeded. e 3. Equation below based on circuit and waveforms shown in h 100 nc Figures 12a, 12b. aal 4. PD (ave) = Average power dissipation per single Av avalanche pulse. , R 50 5. BV = Rated breakdown voltage (1.3 factor accounts for A voltage increase during avalanche). E 6. I = Allowable avalanche current. av 7. ∆T = Allowable rise in junction temperature, not to exceed T (assumed as 25°C in Figure 15, 16). jmax 0 t Average time in avalanche. av = 25 50 75 100 125 150 175 D = Duty cycle in avalanche = t ·f av Starting TJ , Junction Temperature (°C) ZthJC(D, tav) = Transient thermal resistance, see figure 11) P = 1/2 ( 1.3·BV·I ) =(cid:7)(cid:1)T/ Z D (ave) av thJC I =2(cid:1)T/ [1.3·BV·Z ] av th E = P ·t Fig 16. Maximum Avalanche Energy AS (AR) D (ave) av vs. Temperature www.irf.com 7

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) Driver Gate Drive (cid:8)(cid:9)(cid:10)(cid:9)(cid:11) P.W. Period D = + P.W. Period (cid:24) (cid:3) (cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:2)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:5)(cid:6)(cid:7)(cid:1)(cid:11)(cid:12)(cid:13)(cid:2)(cid:14)(cid:15)(cid:3)(cid:9)(cid:6)(cid:2)(cid:11)(cid:12)(cid:13) VGS=10V • (cid:7)(cid:8)(cid:11)(cid:16)(cid:7)(cid:17)(cid:6)(cid:3)(cid:9)(cid:10)(cid:7)(cid:18)(cid:12)(cid:14)(cid:5)(cid:4)(cid:6)(cid:9)(cid:12)(cid:4)(cid:15) (cid:7)(cid:7) • (cid:19)(cid:3)(cid:11)(cid:5)(cid:12)(cid:14)(cid:7)(cid:20)(cid:21)(cid:9)(cid:12)(cid:15) - (cid:7)(cid:7) • (cid:8)(cid:11)(cid:16)(cid:7)(cid:8)(cid:15)(cid:9)(cid:22)(cid:9)(cid:23)(cid:15)(cid:7)(cid:18)(cid:12)(cid:14)(cid:5)(cid:4)(cid:6)(cid:9)(cid:12)(cid:4)(cid:15) (cid:7)(cid:7)(cid:7)(cid:7)(cid:7)(cid:7)(cid:1)(cid:5)(cid:3)(cid:3)(cid:15)(cid:12)(cid:6)(cid:7)(cid:24)(cid:3)(cid:9)(cid:12)(cid:13)(cid:25)(cid:11)(cid:3)(cid:26)(cid:15)(cid:3) D.U.T. ISDWaveform + (cid:2) Reverse (cid:4) Recovery Body Diode Forward - - + Current Currentdi/dt D.U.T. VDSWaveform Diode Recovery (cid:1) dv/dt VDD (cid:7) (cid:22)(cid:19) • (cid:14)(cid:28)(cid:29)(cid:14)(cid:6)(cid:7)(cid:4)(cid:11)(cid:12)(cid:6)(cid:3)(cid:11)(cid:21)(cid:21)(cid:15)(cid:14)(cid:7)(cid:30)(cid:10)(cid:7)(cid:31)(cid:1) (cid:27)(cid:27) Re-Applied • (cid:27)(cid:3)(cid:2)(cid:28)(cid:15)(cid:3)(cid:7)(cid:13)(cid:9)(cid:26)(cid:15)(cid:7)(cid:6)(cid:10) (cid:15)(cid:7)(cid:9)(cid:13)(cid:7)(cid:27)!"!(cid:24)! + Voltage Body Diode Forward Drop • (cid:18)(cid:2)(cid:3)(cid:7)(cid:4)(cid:11)(cid:12)(cid:6)(cid:3)(cid:11)(cid:21)(cid:21)(cid:15)(cid:14)(cid:7)(cid:30)(cid:10)(cid:7)(cid:27)(cid:5)(cid:6)(cid:10)(cid:7)#(cid:9)(cid:4)(cid:6)(cid:11)(cid:3)(cid:7)$(cid:27)$ - Inductor Curent • (cid:27)!"!(cid:24)!(cid:7)%(cid:7)(cid:27)(cid:15)(cid:28)(cid:2)(cid:4)(cid:15)(cid:7)"(cid:12)(cid:14)(cid:15)(cid:3)(cid:7)(cid:24)(cid:15)(cid:13)(cid:6) Ripple ≤ 5% ISD (cid:24)(cid:6)(cid:7) (cid:6)(cid:8)(cid:6)(cid:9)(cid:7)(cid:6)(cid:10)(cid:11)(cid:12)(cid:6)(cid:13)(cid:11)(cid:14)(cid:15)(cid:16)(cid:6)(cid:13)(cid:17)(cid:18)(cid:17)(cid:19)(cid:6)(cid:20)(cid:17)(cid:18)(cid:15)(cid:16)(cid:17)(cid:21) (cid:19)(cid:17) Fig 17. (cid:5)(cid:6)(cid:7)(cid:8)(cid:3)(cid:9)(cid:10)(cid:11)(cid:12)(cid:6)(cid:3)(cid:13)(cid:6)(cid:14)(cid:11)(cid:15)(cid:6)(cid:16)(cid:17)(cid:3)(cid:12)(cid:15)(cid:18)(cid:12)(cid:19)(cid:3)(cid:20)(cid:6)(cid:21)(cid:19)(cid:3)(cid:22)(cid:10)(cid:16)(cid:14)(cid:23)(cid:10)(cid:19)(cid:3)for N-Channel HEXFET(cid:1)(cid:3)Power MOSFETs (cid:22) (cid:27) (cid:7) (cid:27)(cid:17) (cid:7) (cid:19)(cid:17) (cid:20)(cid:23)(cid:24)(cid:23)(cid:25)(cid:23) (cid:22) (cid:19) +(cid:7) - (cid:27)(cid:27) (cid:5)(cid:1)(cid:7) (cid:20)(cid:5)(cid:21)(cid:13)(cid:15)(cid:7)&(cid:2)(cid:14)(cid:6)’(cid:7)≤ 1 ((cid:13) (cid:27)(cid:5)(cid:6)(cid:10)(cid:7)#(cid:9)(cid:4)(cid:6)(cid:11)(cid:3)(cid:7)≤ 0.1 % Fig 18a. Switching Time Test Circuit VDS 90% 10% VGS td(on) tr td(off) tf Fig 18b. Switching Time Waveforms 8 www.irf.com

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) (cid:20)(cid:25)(cid:26)(cid:27)(cid:27)(cid:2)(cid:28)(cid:29)(cid:3)(cid:5)(cid:7)(cid:14)(cid:8)(cid:7) (cid:6)(cid:3)(cid:25)(cid:23)(cid:19)$(cid:10)(cid:31)(cid:6)%(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:2)(cid:7)(cid:5)(cid:6)(cid:8)(cid:9)(cid:10)(cid:4)(cid:8)(cid:6)(cid:11)(cid:7)(cid:12)(cid:5)(cid:8)(cid:2)(cid:5)(cid:8)(cid:3)(cid:2)(cid:13)(cid:13)(cid:2)(cid:3)(cid:4)(cid:14)(cid:4)(cid:10)(cid:6)(cid:8)(cid:15)(cid:2)(cid:5)(cid:16)(cid:11)(cid:4)(cid:6)(cid:17)(cid:17) (cid:20)(cid:25)(cid:26)(cid:27)(cid:27)(cid:2)(cid:28)(cid:29)(cid:3)(cid:5)(cid:7)(cid:16)(cid:19)(cid:3)(cid:30)(cid:7)(cid:16)(cid:8)(cid:10)(cid:31) (cid:3)!(cid:31)"(cid:11)(cid:16)#(cid:7)(cid:19)(cid:10)(cid:11)(cid:31) EXAMPLE: THIS IS AN IRF1010 LOT CODE 1789 INTERNATIONAL PART NUMBER ASSEMBLED ON WW 19, 2000 RECTIFIER IN THE ASSEMBLY LINE "C" LOGO DATE CODE YEAR 0 = 2000 Note: "P" in assembly line position ASSEMBLY indicates "Lead - Free" LOT CODE WEEK 19 LINE C TO-220AB package is not recommended for Surface Mount Application. Notes: 1. For an Automotive Qualified version of this part please seehttp://www.irf.com/product-info/auto/ 2. For the most current drawing please refer to IR website at http://www.irf.com/package/ www.irf.com 9

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) (cid:1)(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:12)(cid:13)(cid:14)(cid:15)(cid:5)(cid:2)(cid:3)(cid:16)(cid:4)(cid:3)(cid:17)(cid:18)(cid:5)(cid:8)(cid:19)(cid:20)(cid:21)(cid:22)(cid:23)(cid:18) (cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:2)(cid:7)(cid:5)(cid:6)(cid:8)(cid:9)(cid:10)(cid:4)(cid:8)(cid:6)(cid:11)(cid:7)(cid:12)(cid:5)(cid:8)(cid:2)(cid:5)(cid:8)(cid:3)(cid:2)(cid:13)(cid:13)(cid:2)(cid:3)(cid:4)(cid:14)(cid:4)(cid:10)(cid:6)(cid:8)(cid:15)(cid:2)(cid:5)(cid:16)(cid:11)(cid:4)(cid:6)(cid:17) (cid:1)(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:11)(cid:12)(cid:13)(cid:14)(cid:15)(cid:5)(cid:2)(cid:3)(cid:24)(cid:20)(cid:5)(cid:25)(cid:3)(cid:24)(cid:4)(cid:22)(cid:23)(cid:17)(cid:5)(cid:26)(cid:23)(cid:27)(cid:28)(cid:24)(cid:29)(cid:3)(cid:20)(cid:22)(cid:28)(cid:23) THIS IS AN IRF530S WITH PART NUMBER LOT CODE 8024 INTERNATIONAL ASSEMBLED ON WW 02, 2000 RECTIFIER F530S IN THE ASSEMBLY LINE "L" LOGO DATE CODE YEAR 0 = 2000 ASSEMBLY LOT CODE WEEK 02 LINE L OR PART NUMBER INTERNATIONAL RECTIFIER F530S LOGO DATE CODE P = DESIGNATES LEAD - FREE PRODUCT (OPTIONAL) ASSEMBLY YEAR 0 = 2000 LOT CODE WEEK 02 A = ASSEMBLY SITE CODE Notes: 1. For an Automotive Qualified version of this part please seehttp://www.irf.com/product-info/auto/ 2. For the most current drawing please refer to IR website at http://www.irf.com/package/ 10 www.irf.com

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) TO-262 Package Outline Dimensions are shown in millimeters (inches) TO-262 Part Marking Information EXAMPLE: THIS IS AN IRL3103L LOT CODE 1789 PART NUMBER INTERNATIONAL ASSEMBLED ON WW 19, 1997 RECTIFIER IN THE ASSEMBLY LINE "C" LOGO DATE CODE YEAR 7 = 1997 ASSEMBLY LOT CODE WEEK 19 LINE C OR PART NUMBER INTERNATIONAL RECTIFIER LOGO DATE CODE P = DESIGNATES LEAD-FREE ASSEMBLY LOT CODE PRODUCT (OPTIONAL) YEAR 7 = 1997 WEEK 19 A = ASSEMBLY SITE CODE Notes: 1. For an Automotive Qualified version of this part please seehttp://www.irf.com/product-info/auto/ 2. For the most current drawing please refer to IR website at http://www.irf.com/package/ www.irf.com 11

(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:6)(cid:7)(cid:8)(cid:9)(cid:10)(cid:9)(cid:11)(cid:12)(cid:13)(cid:3) (cid:1)(cid:1)(cid:2)(cid:3)(cid:4)(cid:5)(cid:7)(cid:3)(cid:30)(cid:18)(cid:5)(cid:31)(cid:5) (cid:18)(cid:18)(cid:21)(cid:5)(cid:26)(cid:23)(cid:27)(cid:28)(cid:24)(cid:29)(cid:3)(cid:20)(cid:22)(cid:28)(cid:23) Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 1.60 (.063) 43..1900 ((..116513)) 1.50 (.059) 0.368 (.0145) 0.342 (.0135) FEED DIRECTION 1.85 (.073) 11.60 (.457) 1.65 (.065) 11.40 (.449) 24.30 (.957) 15.42 (.609) 23.90 (.941) 15.22 (.601) TRL 1.75 (.069) 10.90 (.429) 1.25 (.049) 10.70 (.421) 4.72 (.136) 16.10 (.634) 4.52 (.178) 15.90 (.626) FEED DIRECTION 13.50 (.532) 27.40 (1.079) 12.80 (.504) 23.90 (.941) 4 330.00 60.00 (2.362) (14.173) MIN. MAX. 30.40 (1.197) NOTES : MAX. 1. COMFORMS TO EIA-418. 26.40 (1.039) 4 2. CONTROLLING DIMENSION: MILLIMETER. 24.40 (.961) 3. DIMENSION MEASURED @ HUB. 3 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. (cid:11)(cid:12)(cid:13)(cid:14)(cid:14)(cid:15)(cid:16)(cid:17)(cid:7)(cid:7)(cid:18)(cid:19)(cid:20)(cid:21)(cid:19)(cid:22)(cid:4)(cid:7)(cid:23)(cid:5)(cid:7)(cid:24)(cid:2)(cid:3)(cid:7)(cid:25)(cid:4)(cid:20)(cid:2)(cid:26)(cid:26)(cid:4)(cid:24)(cid:27)(cid:4)(cid:27)(cid:7)(cid:28)(cid:2)(cid:25)(cid:7)(cid:29)(cid:30)(cid:25)(cid:28)(cid:19)(cid:20)(cid:4)(cid:7)(cid:31)(cid:2)(cid:30)(cid:24)(cid:3)(cid:7)(cid:16)(cid:18)(cid:18) (cid:23)(cid:20)(cid:19)(cid:3)(cid:23)(cid:2)(cid:24)(cid:9) Data and specifications subject to change without notice. This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR’s Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 07/2010 12 www.irf.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: I nfineon: IRF2807ZSPBF IRF2807ZPBF IRF2807ZSTRLPBF