Data Sheet No. PD60107 revX IR2133/IR2135(J&S) & (PbF) IR2233/IR2235(J&S) & (PbF) 3-PHASE BRIDGE DRIVER Features Product Summary ••••• Floating channel designed for bootstrap operation Fully operational to +600V or+1200V Tolerant to negative transient voltage VOFFSET 600V or 1200V max. dV/dt immune ••••• Gate drive supply range from 10V/12V to 20V DC and IO+/- 200 mA / 420 mA up to 25V for transient VOUT 10 - 20V or 12 - 20V ••••• Undervoltage lockout for all channels ••••• Over-current shut down turns off all six drivers ton/off (typ.) 750/700 ns ••••• Independent 3 half-bridge drivers ••••• Matched propagation delay for all channels Deadtime (typ.) 250 ns ••••• 2.5V logic compatible ••••• Outputs out of phase with inputs Packages ••••• All parts are also available LEAD-FREE Description The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed power MOSFET and IGBT driver with three independent high side and low side referenced output channels for 3-phase applications. Propri- 28-Lead SOIC etary HVIC technology enables ruggedized monolithic construction. 28-Lead PDIP Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. An independent operational amplifier provides an analog feedback of bridge current via an external current sense resistor. A 44-Lead PLCC w/o 12 leads current trip function which terminates all six outputs can also be de- rived from this resistor. A shutdown function is available to terminate all six outputs. An open drain FAULT signal is provided to indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the FLT-CLR lead. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts or 1200 volts. Typical Connection up to 600V or 1200V (Refer to Lead Assignments for correct pin configuration). This/These diagram(s) show electrical connections only. Please refer to our Application Notes and DesignTips for proper circuit board layout. www.irf.com 1

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All volt- age parameters are absolute voltages referenced to COM. The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units VB1,2,3 High side floating supply voltage (IR2133/IR2135) -0.3 625 (IR2233/IR2235) -0.3 1225 VS1,2,3 High side floating supply offset voltage VB1,2,3 - 25 VB1,2,3 + 0.3 VHO1,2,3 High side floating output voltage VS1,2,3 - 0.3 VB1,2,3 + 0.3 VCC Fixed supply voltage -0.3 25 VSS Logic ground VCC - 25 VCC + 0.3 V VLO1,2,3 Low side output voltage -0.3 VCC + 0.3 VIN Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR) VSS - 0.3 (VSS + 15) or (VCC + 0.3) whichever is lower VIN,AMP Op amp input voltage (CA+ & CA-) VSS - 0.3 VCC + 0.3 VOUT,AMP Op amp output voltage (CAO) VSS - 0.3 VCC + 0.3 VFLT FAULT output voltage VSS - 0.3 VCC + 0.3 dVS/dt Allowable offset supply voltage transient — 50 V/ns PD Package power dissipation @ TA ≤ 25ºC (28 Lead PDIP) — 1.5 (28 Lead SOIC) — 1.6 W (44 lead PLCC) — 2.0 RthJA Thermal resistance, junction to ambient (28 Lead PDIP) — 83 (28 Lead SOIC) — 78 ºC/W (44 lead PLCC) — 63 TJ Junction temperature — 125 TS Storage temperature -55 150 ºC TL Lead temperature (soldering, 10 seconds — 300 Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to COM. The VS offset rating is tested with all supplies biased at 15V differential. Symbol Parameter Definition Min. Max. Units VB1,2,3 High side floating supply voltage VS1,2,3 + 10/12 VS1,2,3 + 20 VS1,2,3 High side floating supply offset voltage (IR2133/IR2135) Note 1 600 (IR2233/IR2235) Note 1 1200 VHO1,2,3 High side floating output voltage VS1,2,3 VB1,2,3 VCC Fixed supply voltage 10 or 12 20 VSS Low side driver return -5 5 V VLO1,2,3 Low side output voltage 0 VCC VIN Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR) VSS VSS + 5 VIN,AMP Op amp input voltage (CA+ & CA-) VSS VSS + 5 VOUT,AMP Op amp output voltage (CAO) VSS VSS + 5 VFLT FAULT output voltage VSS VCC Note 1: Logic operational for VS of COM - 5V to COM + 600V/1200V. Logic state held for VS of COM -5V to COM -VBS. (Please refer to the Design Tip DT97-3 for more details). Note 2: All input pins, op amp input and output pins are internally clamped with a 5.2V zener diode. 2 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Dynamic Electrical Characteristics VBIAS (VCC, VBS1,2,3) = 15V, VS1,2,3 = VSS, TA = 25oC and CL = 1000 pF unless otherwise specified. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay 500 750 1000 VIN = 0 & 5V toff Turn-off propagation delay 450 700 950 VS1,2,3 = 0 to 600V tr Turn-on rise time — 90 150 or 1200V tf Turn-off fall time — 40 70 tsd SD to output shutdown propagation delay 500 750 1000 VIN,VSD = 0 & 5V titrip ITRIP to output shutdown propagation delay 600 850 1100 ns VIN,VITRIP = 0 & 5V tbl ITRIP blanking time — 400 — ITRIP = 1V tflt ITRIP to FAULT propagation delay 400 650 900 VIN,VITRIP = 0 & 5V tfil,in Input filter time (HIN, LIN and SD) — 310 — VIN = 0 & 5V tfltclr FLT-CLR to FAULT clear time 600 850 1100 VIN,VITRIP = 0 & 5V DT Deadtime, LS turn-off to HS turn-on & 100 250 400 VIN = 0 & 5V HS turn-off to LS turn-on SR+ Amplifier slew rate (positive) 5 10 — V/µs SR- Amplifier slew rate (negative) 2 2.5 — NOTE: For high side PWM, HIN pulse width must be ≥ 1µ sec Static Electrical Characteristics VBIAS (VCC, VBS1,2,3) = 15V unless otherwise specified and TA = 25oC. All static parameters other than IO and VO are referenced to VSS and are applicable to all six channels (HS1,2,3 & LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3 and are applicable to the respective output leads: HO1,2,3 or LO1,2,3. Symbol Definition Min. Typ. Max. Units Test Conditions VIH Logic “0” Input Voltage (OUT = LO) 2.2 — — VIL Logic “1” Input Voltage (OUT = HI) — — 0.8 VFCLR,IH Logic “0” Fault Clear Input Voltage 2.2 — — V VFCLR,IL Logic “1” Fault Clear Input Voltage — — 0.8 VSD,TH+ SD Input Positive Going Threshold 1.6 1.9 2.2 VSD,TH- SD Input Negative Going Threshold 1.4 1.7 2.0 VIT,TH+ IITRIP Input Positive Going Threshold 470 570 670 VIT,TH- IITRIP Input Negative Going Threshold 360 460 560 VOH High Level Output Voltage, VBIAS - VO — — 100 mV VIN = 0V, IO = 0A VOL Low Level Output Voltage, VO — — 100 VIN = 5V, IO = 0A ILK Offset Supply Leakage Current (IR2133/IR2135) — — 50 VB1,2,3=VS1,2,3 = 600V (IR2233/IR2235) — — 50 µA VB1,2,3=VS1,2,3 = 1200V IQBS Quiescent VBS Supply Current — 50 100 VIN = 0V or 5V IQCC Quiescent VCC Supply Current — 4 8 mA VIN = 0V or 5V IIN+ Logic “1” Input Bias Current (OUT = HI) — 200 350 VIN = 0V IIN- Logic “0” Input Bias Current (OUT = LO) — 100 250 µA VIN = 5V ISD+ “High” Shutdown Bias Current — 30 100 SD = 5V ISD- “Low” Shutdown Bias Current — — 100 nA SD = 0V IITRIP+ “High” IITRIP Bias Current — 30 100 µA IITRIP = 5V IITRIP- “Low” IITRIP Bias Current — — 100 nA IITRIP = 0V www.irf.com 3

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Static Electrical Characteristics — Continued VBIAS (VCC, VBS1,2,3) = 15V unless otherwise specified and TA = 25oC. All static parameters other than IO and VO are referenced to VSS and are applicable to all six channels (HS1,2,3 & LS1,2,3). The VO and IO parameters are referenced to COM and VS1,2,3 and are applicable to the respective output leads: HO1,2,3 or LO1,2,3. Symbol Parameter Definition Min. Typ. Max. Units Test Conditions IFLTCLR+ “High” Fault Clear Input Bias Current — 200 350 FLT-CLR = 0V IFLTCLR- “Low” Fault Clear Input Bias Current — 100 250 µA FLT-CLR = 5V VBSUV+ VBS Supply Undervoltage Positive Going Threshold (for IR2133/IR2233) 7.6 8.6 9.6 (for IR2135/IR2235) 9.2 10.4 11.6 VBSUV- VBS Supply Undervoltage Negative Going Threshold (for IR2133/IR2233) 7.2 8.2 9.2 (for IR2135/IR2235) 8.3 9.4 10.5 VBSUVH VBS Supply Undervoltage Lockout Hysteresis (for IR2133/IR2233) — 0.4 — (for IR2135/IR2235) — 1 — VCCUV+ VCC Supply Undervoltage Positive Going Threshold V (for IR2133/IR2233) 7.6 8.6 9.6 (for IR2135/IR2235) 9.2 10.4 11.6 VCCUV- VCC Supply Undervoltage Negative Going Threshold (for IR2133/IR2233) 7.2 8.2 9.2 (for IR2135/IR2235) 8.3 9.4 10.5 VCCUVH VCC Supply Undervoltage Lockout Hysteresis (for IR2133/IR2233) — 0.4 — (for IR2135/IR2235) — 1 — Ron,FLT FAULT- Low On Resistance — 70 100 Ω IO+ Output High Short Circuit Pulsed Current 200 250 — VOUT = 0V, VIN = 0V PW ≤ 10 µs mA IO- Output Low Short Circuit Pulsed Current 420 500 — VOUT = 15V, VIN = 5V PW ≤ 10 µs VOS Amplifier Input Offset Voltage — 0 30 mV CA+=0.2V, CA-=CAO IIN,AMP Amplifier Input Bias Current — — 4 nA CA+ = CA- = 2.5V CMRR Amplifier Common Mode Rejection Ratio 50 70 — CA+ = 0.1V & 5V, CA- = CAO PSRR Amplifier Power Supply Rejection Ratio 50 70 — dB CA+=0.2V, CA-=CAO VCC = 10V & 20V VOH,Amp Amplifier High Level Output Voltage 5 5.2 5.4 V CA+ = 1V, CA- = 0V VOL,Amp Amplifier Low Level Output Voltage — — 20 mV CA+ = 0V, CA- = 1V ISRC,Amp Amplifier Output Source Current 4 7 — CA+ = 1V, CA- = 0V, CAO = 4V ISNK,Amp Amplifier Output Sink Current 0.5 1 — CA+ = 0V, CA- = 1V, CAO = 2V mA IO+,Amp Amplifier Output High Short Circuit Current — 10 — CA+ = 5V, CA- = 0V, CAO = 0V IO-,Amp Amplifier Output Low Short Circuit Current — 4 — CA+ = 0V, CA- = 5V, CAO = 5V 4 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Functional Block Diagram Lead Definitions Symbol Lead Description HIN1,2,3 Logic inputs for high side gate driver outputs (HO1,2,3), out of phase. LIN1,2,3 Logic inputs for low side gate driver outputs (LO1,2,3), out of phase. FAULT Indicates over-current or undervoltage lockout (low side) has occurred, negative logic. VCC Logic and low side fixed supply. ITRIP Input for over-current shut down. FLT-CLR Logic input for fault clear, negative logic. SD Logic input for shut down. CAO Output of current amplifier. CA- Negative input of current amplifier. CA+ Positive input of current amplifier. VSS Logic ground. COM Low side return. VB1,2,3 High side floating supplies. HO1,2,3 High side gate drive outputs. VS1,2,3 High side floating supply returns. LO1,2,3 Low side gate drive outputs www.irf.com 5

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Lead Assignments ITRIP FAULT ITRIP FAULT FLT-CLR LIN3 FLT-CLR LIN3 CAO LIN2 CAO LIN2 CA- LIN1 CA- LIN1 CA+ HIN3 CA+ HIN3 SD HIN2 SD HIN2 VSS HIN1 VSS HIN1 COM VCC COM VCC LO3 VB1 LO3 VB1 LO2 HO1 LO2 HO1 LO1 VS1 LO1 VS1 VS3 VB2 VS3 VB2 HO3 HO2 HO3 HO2 VB3 VS2 VB3 VS2 28 Lead DIP 44 Lead PLCC w/o 12 Leads 28 Lead SOIC (Wide Body) IR2133 IR2133J IR2133S IR2135 IR2135J IR2135S IR2233J IR2233S IR2235J IR2235S Part Number HIN1,2,3 LIN1,2,3 ITRIP SD FLT-CLR FAULT HO1,2,3 LO1,2,3 Figure 1. Input/Output Timing Diagram 6 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) HIN HIN 50% 50% LIN 50% 50% LIN ton tr toff tf LO 90% 90% 50% 50% HO HO LO 10% 10% DT DT Figure 2. Switching Time Waveform Definitions Figure 3. Deadtime Waveform Definitions FLT-CLR 50% 50% ITRIP FAULT 50% 50% Any Output 50% tflt tfltclr titrip Figure 4. Overcurrent Shutdown Waveform tin,fil tin,fil U 50% SD HIN/LIN on off on off on off tsd high HO 90% HO/LO LO low Figure 4.5. Input Filter Function Figure 5. Shutdown Waveform Definitions www.irf.com 7

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 1500 1500 e (ns) 1200 e (ns)1200 Max. m m y Ti 900 Max. y Ti 900 Typ. a a el Typ. el n D 600 n D 600 Min. o Min. o n- n- ur 300 ur 300 T T 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 6A. Turn-On Time vs. Temperature Figure 6B. Turn-On Time vs. Voltage 1500 1500 s) ay Time (n 1290000 MTyapx.. Time (ns) 1290000 Max. urn-on Del 360000 Min. Turn-Off 360000 TMyipn.. T 0 0 2.5 3 3.5 4 4.5 5 -50 -25 0 25 50 75 100 125 Input Voltage (V) Temperature (oC) Figure 6C. Turn-On Time vs. Input Voltage Figure 7A. Turn-Off Time vs. Temperature 1500 1500 1200 1200 ns) Max. ns) Max. me ( 900 me ( 900 Ti Typ. Ti Typ. Off Off n- 600 Min. n- 600 Min. ur ur T T 300 300 0 0 10 12.5 15 17.5 20 2.5 3 3.5 4 4.5 5 Supply Voltage (V) Input Voltage (V) Figure 7B. Turn-Off Time vs. Voltage Figure 7C. Turn-Off Time vs. Input Voltage 8 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 250 250 ns 200 ns 200 Max. me ( me ( Ti 150 Ti 150 e Max. e Ris Ris Typ. n 100 n 100 O Typ. O n- n- Tur 50 Tur 50 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Fiure 8A. Turn-On Rise Time vs.Temperature Fiure 8B. Turn-On Rise Time vs.Voltage 150 150 me120 me 120 Off Fall Ti 90 Off Fall Ti 90 Max. Turn- 60 Max. Turn- 60 Typ. 30 Typ. 30 0 0 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) Figure 9A. Turn-Off Fall Time vs. Temperature Figure 9B. Turn-Off Fall Time vs. Voltage 1500 1500 me (ns) 1200 me (ns) 1200 Max. D Ti 900 Max. D Ti 900 Typ. S S D to output 360000 TMyipn.. D to output 360000 Min. S S 0 0 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Temperature (oC) Supply Voltage (V) Figure 10A. SD to Output shutdown Time Figure 10B. SD to Output shutdown Time vs. Temperature vs. Voltage www.irf.com 9

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 1500 1500 RIP to FAULT Time (ns 1236900000000 TMMyaipnx... RIP to FAULT Time (ns 1236900000000 TMMyaipnx... IT IT 0 0 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) _____ _____ Figure 11A. ITRIP to FAULT Time Figure 11B. ITRIP to FAULT Time vs. Temperature vs. Voltage 1800 1800 ns ns me ( 1500 me (1500 SD Ti 1200 SD Ti1200 Max. RIP to output 690000 TMMyaipnx... RIP to output 690000 MTyinp.. T T I I 300 300 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) Figure 12A. ITRIP to output shutdown Time Figure 12B. ITRIP to output shutdown Time vs. Temperature vs. Voltage s s n 1800 n 1800 e ( e ( m m Ti 1500 Ti 1500 ar ar e e T cl 1200 T cl 1200 Max. L Max. L U U LR to FA 690000 TMyipn.. LR to FA 690000 MTiynp.. C C LT- 300 LT- 300 F F 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) ________ ______ ________ ______ Figure 13A. FLT-CLR to FAULT clear Time Figure 13B. FLT-CLR to FAULT clear Time vs. Temperature vs. Voltage 10 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 750 750 600 600 Deadtime (ns) 340500 MTyapx.. Deadtime (ns)340500 TMyapx.. 150 150 Min. Min. 0 0 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) Figure 14A. Deadtime vs. Temperature Figure 14B. Deadtime vs. Voltage 20 20 µw rate (v/s) 1126 Typ. µw rate (v/s)1126 Typ. mplifier sle 48 Min. mplifier sle 48 Min. A A 0 0 10 12.5 15 17.5 20 -50 -25 0 25 50 75 100 125 Supply Voltage (V) Temperature (oC) Figure 15A. Amplifier slew rate (+) Figure 15B. Amplifier slew rate (+) vs. Temperature vs. Voltage 5 5 µs) µs) ate (v/ 34 ate (v/ 4 w r w r 3 mplifier sle 12 MTyinp.. mplifier sle 2 TMyipn.. A A 0 1 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 16A. Amplifier slew rate (-) Figure 16B. Amplifier slew rate (-) vs. Temperature vs. Voltage www.irf.com 11

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 6 6 V) V) e ( 5 e ( 5 g g a a Volt 4 Volt 4 ut ut p p n 3 n 3 0" I Min. 0" I Min. gic " 2 gic " 2 o o L L 1 1 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 17A. Logic "0" Input Voltage (OUT=LO), Figure 17B. Logic "0" Input Voltage (OUT=LO), Fault Clear Voltage vs. Temperature Fault Clear Voltage vs. Voltage 5 5 V) V) e ( 4 e ( 4 g g a a Volt 3 Volt 3 ut ut p p n 2 n 2 1" I 1" I c " 1 Max. c " 1 Max. gi gi o o L L 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperatre (oC) Supply Voltage (V) Figure 18A. Logic "1" Input (OUT=HI), Fault Figure 18B. Logic "1" Input (OUT=HI), Fault Clear Input Voltage vs. Temperature Clear Input Voltage vs. Voltage 3.0 3.0 +) (V) 2.5 Max. +) (V) 2.5 Max. H ( H ( nput T 2.0 TMyipn.. nput T 2.0 TMyipn.. D I 1.5 D I 1.5 S S 1.0 1.0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperatre (oC) Supply Voltage (V) Figure 21A. SD Input TH(+) vs. Figure 21B. SD Input TH(+) vs. Voltage Temperature 12 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 3.0 3.0 SD Input TH (-) (V) 122...505 MTMyianpx... SD Input TH (-) (V) 122...505 MTMyaipnx... 1.0 1.0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperatre (oC) Supply Voltage (V) Figure 22A. SD Input TH(-) vs. Temperature Figure 22B. SD Input TH(-) vs. Voltage 1000 1000 V) V) m m 800 800 +) ( Max. +) ( Max. H ( H ( T 600 Typ. T 600 Typ. put Min. put Min. n n IP 400 IP 400 RI RI IIT IIT 200 200 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 23A. I Input TH(+) vs. Temperature Figure 23B. I Input TH(+) vs. Voltage ITRIP ITRIP 900 900 V) V) m 700 m 700 H (-) ( Max. H (-) ( Max. T 500 T 500 Typ. ut Typ. ut p p Min. InP300 Min. InP300 RI RI IIT IIT 100 100 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 24A. I Input TH(-) vs.Temperature Figure 24B. I Input TH(-) vs. Voltage ITRIP ITRIP www.irf.com 13

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) V) 0.5 V) 0.5 ge ( 0.4 ge ( 0.4 a a Volt 0.3 Volt 0.3 put 0.2 put 0.2 Out 0.1 Max. Out 0.1 Max. el el 0.0 ev 0.0 ev L L 10 12.5 15 17.5 20 h -50 -25 0 25 50 75 100 125 h g g Hi Hi Supply Voltage (V) Temperature (oC) Figure 25A. High Level Output vs. Temperature Figure 25B. High Level Output vs. Voltage V) 0.5 V) 0.5 e ( 0.4 e ( 0.4 g g olta 0.3 olta 0.3 V V ut 0.2 ut 0.2 Outp 0.1 Max. Outp 0.1 Max. el 0 el 0 ev ev 10 12.5 15 17.5 20 L -50 -25 0 25 50 75 100 125 L w w Supply Voltage (V) Lo Temperature (oC) Lo Figure 26A. Low Level Output vs. Temperature Figure 26B. Low Level Output vs. Voltage A) 500 A) 500 µ µ nt ( 400 nt ( 400 e e urr 300 urr 300 C C 200 e 200 e g g 100 ka 100 ka Max. Lea 0 Max. Lea 0 y y 0 100 200 300 400 500 600 pl -50 -25 0 25 50 75 100 125 pl up up Supply Voltage (v) S Temperature (oC) S et et s s Off Off Figure 27A. Offset Supply Leakage Figure 27B. Offset Supply Leakage Current vs. Temperature Current vs. Voltage 14 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 250 250 Α) Α) µ 200 µ 200 nt ( nt ( e e urr 150 urr 150 C C ply 100 Max. ply 100 up up Max. S Typ. S 50 50 Typ. V V 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 28A. V Supply Current Figure 28B. V Supply Current BS BS vs. Temperature vs. Voltage 20 20 A) A) µ 16 µ 16 nt ( nt ( e e urr 12 urr 12 C C ply 8 Max. ply 8 Max. p p u u V Scc 4 Typ. V Scc 4 Typ. 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 29A. V Supply Current vs. Figure 29B. V Supply Current vs. Voltage cc cc Temperature 800 800 A) A) µnt ( 600 µnt ( 600 e e urr urr C C ut 400 ut 400 p p c "1" In 200 MTyapx.. c "1" In 200 MTyapx.. gi gi o o L L 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 30A. Logic "1" Input Bais Current Figure 30B. Logic "1" Input Bais Current vs. Temperature vs. Voltage www.irf.com 15

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 800 800 A) A) µnt ( 600 µnt ( 600 e e urr urr C C ut 400 ut 400 p p n n c "0" I 200 Max. c "0" I 200 Max. ogi Typ. ogi Typ. L L 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 31A. Logic "0" Input Bais Current Figure 31B. Logic "0" Input Bais Current vs. Temperature vs. Supply Voltage 400 400 A) A) µnt ( 300 µnt ( 300 e e urr urr C C s 200 s 200 ai ai B B D D h" S 100 Max. h" S 100 Max. Hig Typ. Hig Typ. " 0 " 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 32A. "High" Shutdown Bais Current Figure 32B. "High" Shutdown Bais Current vs. Temperature vs. Supply Voltage 500 500 A) A) n n nt ( 400 nt ( 400 e e urr 300 urr 300 C C s s Bai 200 Bai 200 D D w" S 100 Max. w" S 100 Max. o o L L " 0 " 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 33A. "Low" Shutdown Bais Current Figure 33B. "Low" Shutdown Bais Current vs. Temperature vs. Supply Voltage 16 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 400 400 A) A) µ µ ent ( 300 ent ( 300 urr urr C C as 200 as 200 Bi Bi P P RI RI Max. h" IIT 100 Max. h" IIT 100 g g Typ. Hi Typ. Hi " 0 " 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 34A. "High" I Bais Current Figure 34B. "High" I Bais Current ITRIP ITRIP vs. Temperature vs. Supply Voltage A) 500 A) 500 n n nt ( 400 nt ( 400 e e urr urr C 300 C 300 s s ai ai B 200 B 200 P P RI RI w" IIT 100 Max. w" IIT 100 Max. o o L L " 0 " 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 35A. "Low" I Bais Current Figure 35B. "Low" I Bais Current ITRIP ITRIP vs. Temperature vs. Supply Voltage A) 800 A) 800 µnt ( µnt ( e e urr 600 urr 600 C C ut ut p p n 400 n 400 ar I ar I Cle Max. Cle Max. ult 200 Typ. ult 200 Typ. a a F F h" 0 h" 0 g g Hi -50 -25 0 25 50 75 100 125 Hi 10 12.5 15 17.5 20 " " Temperature (oC) Supply Voltage (V) Figure 36A. "High" Fault Clear Input Bais Current Figure 36B. "High" Fault Clear Input Bais Current vs. Temperature vs. Supply voltage www.irf.com 17

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) A) 800 A) 800 µnt ( µnt ( e e urr 600 urr 600 C C ut ut np 400 np 400 ar I ar I e e Cl 200 Cl 200 ult Max. ult Max. Fa Typ. Fa Typ. w" 0 w" 0 Lo -50 -25 0 25 50 75 100 125 Lo 10 12.5 15 17.5 20 " " Temperature (oC) Supply Voltage (V) Figure 37A. "Low" Fault Clear Input Bais Current Figure 37B. "Low" Fault Clear Input Bais Current vs. Temperature vs. Supply Voltage 14 12 +) (V) 12 Max. +) (V) 11 Max. h ( Typ. h ( T 10 T 9 V Min. V Typ. U U VBS 8 VBS 8 Min. 6 6 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Temperature (oC) Temperature (oC) Figure 38A. IR2135/IR2235 V Undervoltage Figure 38B. IR2133/IR2233 V Undervoltage BS BS Threshold (+) vs. Temperature Threshold (+) vs. Temperature 14 12 V) 12 V) 11 H (+) ( Max. H (+) ( Max. V T 10 Typ. V T 9 Min. U Min. U V 8 V 8 Typ. 6 6 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Temperature (oC) Temperature (oC) Figure 39A. IR2135/IR2235 VBS Undervoltage Figure 39B. IR2133/IR2233 VBS Undervoltage Threshold (-) vs. Temperature Threshold (-) vs. Temperature 18 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 14 12 V) 13 V) 11 +) ( Max. +) ( Max. H ( H ( T 11 T 9 Typ. V Typ. V U U V cc10 Min. V cc 8 Min. 8 6 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Temperature (oC) Temperature (oC) Figure 40A. IR2135/IR2235 V Undervoltage Figure 40B. IR2133/IR2233 V Undervoltage cc cc Threshold (+) vs. Temperature Threshold (+) vs. Temperature 12 12 V) 11 Max. V) 11 +) ( +) ( H ( Typ. H ( Max. T 9 T 9 V Min. V Typ. U U V cc 8 V cc 8 Min. 6 6 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 Temperature (oC) Temperature (oC) Figure 41A. IR2135/IR2235 V Undervoltage Figure 41B. IR2133/IR2233 V Undervoltage cc cc Threshold (-) vs. Temperature Threshold (-) vs. Temperature Ω)Resistance ( 125000 ΩResistance () 11925000 TMyapx.. w On 100 Max. w On 60 ULT-Lo 50 Typ. ULT-Lo 30 FA 0 FA 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 42A. FAULT- Low On Resistance Figure 42B. FAULT- Low On Resistance vs. Temperature vs. Supply Voltage www.irf.com 19

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 500 500 Αm) Αm) nt (400 nt ( 400 e e urr300 Typ. urr 300 C C ce Min. ce Typ. our200 our 200 Min. S S put 100 put 100 ut ut O O 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply voltage (V) Figure 43A. Output Source Current Figure 43B. Output Source Current vs. Temperature vs. Supply Voltage 1000 1000 Αm) Αm) nt ( 800 nt ( 800 e e urr 600 Typ. urr 600 C C k Min. k Typ. n n Si 400 Si 400 Min. ut ut p p ut 200 ut 200 O O 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 44A. Ourput Sink Current Figure 44B. Ourput Sink Current vs. Temperature vs. Supply Voltage V) 90 V) 90 m m ge ( 70 ge ( 70 a a olt olt et V 50 et V 50 s s Off 30 Max. Off 30 Max. ut ut p p er In 10 Typ. er In 10 Typ. plifi -10 plifi -10 m m A -50 -25 0 25 50 75 100 125 A 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 45A. Amplifier Input Offest Voltage Figure 45B. Amplifier Input Offest Voltage vs. Temperature vs. Supply Voltage 20 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 150 150 B) B) d 120 d 120 R ( R ( R R M 90 M 90 C Typ. C Typ. plifier 60 Min. plifier 60 Min. m m A 30 A 30 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 46A. Amplifier Common Mode Rejection Figure 46B. Amplifier Common Mode Rejection Ratio vs. Temperature Ratio vs. Supply Voltage 125 125 B) 100 B) 100 d d R ( R ( R 75 Typ. R 75 Typ. S S P P plifier 50 Min. plifier 50 Min. m m A 25 A 25 0 0 -50 -25 0 25 50 75 100 125 10 12.5 15 17.5 20 Temperature (oC) Supply Voltage (V) Figure 47A. Amplifier Power Supply Rejection Figure 47B. Amplifier Power Supply Rejection Ratio vs. Temperature Ratio vs. Supply Voltage 6.0 50 V) 5.7 V) 40 V (OH 5.4 Max. V (OL 30 plifier 5.1 TMyipn.. plifier 20 Max. m m A A 4.8 10 4.5 0 10 12.5 15 17.5 20 10 12.5 15 17.5 20 Supply Voltage (V) Supply Voltage (V) Figure 48. Amplifier High Level Output Voltage Figure 49. Amplifier Low Level Output Voltage vs. Supply Voltage vs. Supply Voltage www.irf.com 21

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 15 2.5 V) V) (C 12 (K 2.0 R N er IS 9 er IS 1.5 plifi 6 Typ. plifi 1.0 Typ. m 3 Min. m 0.5 Min. A A 0 0.0 10 12.5 15 17.5 20 10 12.5 15 17.5 20 Supply Voltage (V) Supply Voltage (V) Figure 50. Amplifier Output Source Current Figure 51. Amplifier Output Sink Current vs. Supply Voltage vs. Supply Voltage 20 20 V) V) + (O 16 - (O 16 er I 12 er I 12 plifi 8 Typ. plifi 8 m 4 m 4 Typ. A A 0 0 10 12.5 15 17.5 20 10 12.5 15 17.5 20 Supply Voltage (V) Supply Voltage (V) Figure 52. Amplifier Output High Short Circuit Figure 53. Amplifier Output Low Short Circuit Current vs. Supply Voltage Current vs. Supply Voltage 22 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 120 120 110 110 100 100 perature (°C) 67890000 438200VV perature (°C) 67890000 431826000V ntion Tem 345000 106V0V ntion Tem 345000 0V Ju Ju 20 20 1E+2 1E+3 1E+4 1E+5 1E+2 1E+3 1E+4 1E+5 Frequency (Hz) Frequency (Hz) Figure 7. IR2133J Junction Temperature vs Figure 8. IR2133J Junction Temperature vs Frequency Driving (IRGPC20KD2) Rgate = 5.1Ω @ Frequency Driving (IRGPC30KD2) Rgate = 5.1Ω @ Vcc = 15V Vcc = 15V 120 150 480V 110 140 130 100 120 perature (°C) 67890000 431826000VVV perature (°C) 117890100000 312600VV Junction Tem 23450000 0V Junction Tem 2345600000 0V 1E+2 1E+3 1E+4 1E+5 1E+2 1E+3 1E+4 1E+5 Frequency (Hz) Frequency (Hz) Figure 9. IR2133J Junction Temperature vs Figure 10. IR2133J Junction Temperature vs Frequency Driving (IRGPC40KD2) Rgate = 5.1Ω @ Frequency Driving (IRGPC50KD2) Rgate = 5.1Ω @ Vcc = 15V Vcc = 15V www.irf.com 23

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 900V 900V 120 1120 110 1110 500V 100 1100 500 re (°C) 8900 re (°C) 8900 eratu 70 300V eratu 70 300 p 60 p 60 m m Te 50 Te 50 Junction 3400 0V Junction 3400 0V 20 20 1E+2 1E+3 1E+4 1E+5 1E+2 1E+3 1E+4 1E+5 Frequency (Hz) Frequency (Hz) Figure 11. IR2233J Junction Temperature vs Figure 12. IR2233J Junction Temperature vs Frequency Driving (IRG4PH30KD) Rgate = 20Ω @ Frequency Driving (IRG4PH40KD) Rgate = 15Ω @ Vcc = 15V Vcc = 15V 900V 500V 900V 500V 300V 120 120 300V 110 110 100 100 ) 90 ) 90 e (°C 80 e (°C 80 r r ratu 70 ratu 70 0V pe 60 pe 60 m m e 50 e 50 Junction T 234000 0V Junction T 234000 1E+2 1E+3 1E+4 1E+5 1E+2 1E+3 1E+4 1E+5 Frequency (Hz) Frequency (Hz) Figure 13. IR2233J Junction Temperature vs Figure 14. IR2233J Junction Temperature vs Frequency Driving (IRG4PH50KD) Rgate = 10Ω @ Frequency Driving (IRG4ZH71KD) Rgate = 5Ω @ Vcc = 15V Vcc = 15V 24 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) Package Dimensions 28-Lead PDIP (wide body) 01-6011 01-3024 02 (MS-011AB) NOTES 28-Lead SOIC (wide body) 01-6013 01-3040 02 (MS-013AE) www.irf.com 25

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) 44-Lead PLCC w/o 12 leads 01-6009 00 01-3004 02(mod.) (MS-018AC) 26 www.irf.com

IR2133/IR2135/IR2233/IR2235(J&S) & (PbF) LEADFREE PART MARKING INFORMATION Part number IRxxxxxx YWW? Date code IR logo ?XXXX Pin 1 Identifier Lot Code ? MARKING CODE (Prod mode - 4 digit SPN code) P Lead Free Released Non-Lead Free Released Assembly site code Per SCOP 200-002 ORDER INFORMATION Basic Part (Non-Lead Free) Leadfree Part 28-Lead PDIP IR2133 order IR21332 28-Lead PDIP IR2133 order IR2133PbF 8-Lead SOIC IR2133S order IR2133S 28-Lead SOIC IR2133S order IR2133SPbF 28-Lead PDIP IR2135 order IR2135 28-Lead PDIP IR2135 order IR2135PbF 28-Lead SOIC IR2135S order IR2135S 28-Lead SOIC IR2135S order IR2135SPbF 28-Lead PDIP IR2233 not available 28-Lead PDIP IR2233 order IR2233PbF 28-Lead SOIC IR2233S order IR2233S 28-Lead SOIC IR2233S order IR2233SPbF 28-Lead PDIP IR2235 not available 28-Lead PDIP IR2235 order IR2235PbF 28-Lead SOIC IR2235S order IR2235S 28-Lead SOIC IR2235S order IR2235SPbF 44-Lead PLCC IR2133J order IR2133J 44-Lead PLCC IR2133J order IR2133JPbF 44-Lead PLCC IR2135J order IR2135J 44-Lead PLCC IR2135J order IR2135JPbF 44-Lead PLCC IR2233J order IR2233J 44-Lead PLCC IR2233J order IR2233JPbF 44-Lead PLCC IR2235J order IR2235J 44-Lead PLCC IR2235J order IR2235JPbF IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 This product has been qualified per industrial level Data and specifications subject to change without notice. 9/22/2005 www.irf.com 27