M-1709 ES W-I H S IM series C T I W S L E N A Sealed snap-action pushbutton switches • P bushing Ø 12 mm • momentary DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS • Front panel sealing : IP67 according to IEC 60529 • Shock resistance : 50 g - 11 ms according to IEC 68-2-27 • Salt spray : IEC 512-6, test 11f • Operating temperature : -40 °C to +85 °C (-40 °F to +185 °F) • Storage temperature : -40 °C to +85 °C (-40 °F to +185 °F) ELECTRICAL SPECIFICATIONS • Max. current/voltage rating with resistive load : 3 A 28 VDC • Initial contact resistance : 100 mΩ max. • Insulation resistance : 1 GΩ min. at 500 VDC • Dielectric strength : 500 Vrms between terminals • Electrical life at full load : 25,000 cycles GENERAL SPECIFICATIONS • Panel thickness : 1.5 mm (.059) to 10 mm (.394) • Total travel : 1.7 mm (.067) ± 0.3 mm • Low level or mechanical life : 1,000,000 cycles • Torque (applied to nut) : 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 MATERIALS • Case : polyamide 4/6 • Actuator : polyamide 6/6 • Bushing/bezel : polyamide 6/6 • Contacts : silver, gold plated • Terminal seal : epoxy The company reserves the right to change specifications without notice. 1 B1

S E H IM series C T I W S Sealed snap-action pushbutton switches • L E bushing Ø 12 mm • momentary N A P MOUNTING STANDARD BEZEL AGENCY APPROVAL (CONTINUED) 1 A 125 VAC/250 VAC BACK OF PANEL SPACE REQUIREMENT File E83438 12.90 MaxMAX.) (2.708.070) (2.708.070) (.507) AMvaariklainbgil i:t yto : ocordnesru min-10.00sltwMIN.-.393 faitccthoersy fmora drkeetadi lUs Lo, fc aopmprpolevteed models. Ø13.60 a1ppropriate box of 1.50o(.059rdering form20.00a(.787)t. 20(.787) (.535DIA) Ø13.50 (.531DIA) TERMINALS CIMPE 3.70(.146)(.10.3090) 3.70(.146)(3.50.10.30(.138)90) 3.50(.138) CIMPE7.60(.299) 7.601(.299).202.40(.094) 1.202.40(.094) MOUNTING REDUCED BEZEL SCtraIigMhtC PPCIMCPle E2C8/H013/Q(2.21u.18i00c0)k1-c2onne((.c.0214t.18 70Z0)) C(.0I4M7) CZCIMCZPAØN13E.6L0 CUT-O(1.5U20.97T0) 2 0.80min-4.30Max(.031MIN.-.169MAX.) 1.50min-10.00Max(.059MIN.-.393MAX.) 17.50(.689) (1.678.590) (1.678.590) 20(.787) ELECTRICAL FUNCTIONS (.535DIA) Ø13.50 Ø15.60 (.531DIA) (.614DIA) - Flat seal CIMPE2 CIMC CIMC MATRIX MOUNTING Function 7 (NC+NO) Ø15.00 Ø15.00 1 2 Ø313.60 lCEeIMF CC2T(1H8.520.9/701)0l3Ee/ C220H81/1023/22012 0.80min-4.30Max(.031MIN.-.169MAX.) 1.50min-10.00Max(.059MIN.-.393MAX.) 5.00(.196)17.502(.689)ECCIM(H.590P1DIAE)(1.6728.59l0)e 2(19.678.59/0)03/2015.002(.196)2 20(.5(.787)90DIA) MO(.53U5DIAN) TING STANDARD BEZEL Ø13.50 CIMFCT (.Ø61145D.6IA0) (.531DIA) Echelle 0.9 CIM075234 PANEL CUT-OUT (1.520.970)(1.520.970) min-10.00MaxMIN.-.393MAX.) min-10.00MaxMIN.-.393MAX.) (2.708.070)B(2.70A8.07C0)(2K.708 .0O70)F(2. 70P8.07A0)NEL0 7S5PACE REQCUIIMREMPEEN2T - O2-3r4ing Ø13.60 (1.520.970) (.Ø53153D.6I(A20.Ø5)3153D.6IA0) ECCIMH0.80min-4.30Max(.031MIN.-.169MAX.)P1E1.50min-10.00Max12(.059MIN.-.393MAX.)le 129 -(. Ø5F/3117.500l13aD.5(.689)tI3(A0 .sØ5)3e1/132aD.5IlA00) 11.502(.059(1.678.51.5090)(.059 (1.678.590) 20.00(.787) 20.00(.787) 20(.787) CIMCPIMEPE 20(.787) 20(.787) (.535DIA) Ø13.50 Ø15.60 MATRIX M(.5O31UDINA)TING (.614DIA) CIM075234 12.90 MaxMAX.) (2.708.070) (2.708.070) (.507) min-10.00MIN.-.393 CEIMCCPEIHMEC1PHCE1IMPE2 Ech 0.9 Ø13.60 1 1.50(.059 20.00(.787) 20(.787) le 2le8 /2083//0230/122012 LE 28/03/2012 (.535DIA) Ø13.50 (.531DIA) CIMPE2 B1 2 ECH1 le 29/03/2012 CIMPE CIMPE ECH1 le 28/03/2012

S E IM series H C T I W Sealed snap-action pushbutton switches • S L bushing Ø 12 mm • momentary E N A P BUILD YOUR PART NUMBER BASIC PART NUMBER IM SERIES ACTUATOR SHAPES ELECTRICAL FUNCTION TERMINALS CONTACTS R Round, curved 7 NC + NO P Straight PC Silver, gold 4 plated (standard) P Round, flat Z Quick-connect Actuator marking available on round flat models (symbol 10 mm max.). On request. OPTIONS ACTUATOR COLORS BUSHING & BEZEL BEZEL OPTIONS ACTUATOR OPTION APPROVAL 1 Blue 2 Black Blank Standard bezel Blank Std actuator Consult factory for UL detail of approved B Dark blue Other : on request Dia. 15 (.590) 104 High actuator models. 075 reduced bezel, 2 Black front mounting Dia. 15 (.590) 3 Green 234 reduced bezel, std mounting 4 Grey 5 Yellow 6 Red 7 White 9 Orange ABOUT THIS SERIES On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart. Notice : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A sealing boot is available to protect the switches against frost and sand (P/N U5125). See "Sealing Boots" section of website. Mounting accessories : Standard hardware supplied : 1 flat seal (standard bezel) or 1 O-ring (reduced bezel) and 1 metal hex nut 14 mm (.551) across flats. Hex nut part number U166. Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part number U4248. 3

S E H IM series C T I W S Sealed snap-action pushbutton switches • L E bushing Ø 12 mm • momentary N A Common terminal identified by a horizontal dash P FLAT STANDARD BEZEL STRAIGHT PC TERMINALS 5.00(.196) 2.00(.078) (.Ø47122D.0I0A) (.6Ø8187D.5IA0) Curved actuator IMR7P4 NC+NO 18.1(.713) (.Ø47122D.0I0Axx00..7755SISI) (.1402.58)0 Flat actuator EPOXY IMP7P4 NC+NO (.00.2500) (.10.3090) 3.50(.138) 3.70(.146) 2.80 3.35 (.110) (.132) 3.35 (.132) FLAT CIMR7P STANDARD BEZEL QUICK-CONNECT TERMINALSCIRSH 5.00(.196) 2.00(.078) (.Ø47122D.0I0A) (.6Ø8187D.5IA0) Page 10-11-12-13 CurvedIM aRc7tuZa4torCPaIRgSe H10-11-1N2-1C3+NO 22.00(.866) (.Ø47122D.0I0Axx00..7755SISI) (.1402.58)0 EPOXCY IMR7P Flat actuator IMP7Z4 NC+NO (.00.2500) E(.10c.427h0) 0.92.40(.094) 7.60(.299) 3.35 (.132) (.31.3325) LE 28(./210.18003) /2012 CIMR7Z CIRSH ACTUATOR COLORS Page 10-11-12-13 BASIC P/N CIRSH 1 Blue Page 10-11-12-13 B Dark blue CIMR7Z 2 Black 3 Green Ech 0.9 4 Grey 5 Yellow LE 28/03/2012 6 Red 7 White 9 Orange BUSHING AND BEZEL BASIC P/N 2 Black (standard) Other : on request 4

S E IM series H C T I W S Sealed snap-action pushbutton switches • L bushing Ø 12 mm • momentary E N A P BEZEL OPTIONS BASIC P/N Blank Standard bezel Ø15.00 Ø15.00 075 Dia. 15 (.590) reduced bezel, mounting of the (.590DIA) (.590DIA) 234 sDwiait. c1h5 f(r.o5m90 )t hreed fruocnetd in btoe zae lt,h srteaanddeadrd p manoeul nctuint-gout 5.00(.196) 5.00(.196) 2 2 CIM075234 075 234 075 234 ACTUATOR OPTION BASIC P/N Blank Standard actuator Ø12.00 Ø12.00 104 High actuator (.472DIA) 4.70(.185) (.472DIA) 4.70(.185) CIM075234 Ech 0.9 104 IMR 104 IMP LE 28/03/2012 AGENCY APPROVAL BASIC P/N UL Availability : consult factory for details of approved models. Marking : to order switches marked UL, complete appropriate box of ordering format. 5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A pem: IMP7P462 IMR7Z452075 IMR7P422075 IMP7P422104 IMR7P412104 IMP7Z452104 IMR7P492075 IMP7Z462075 IMR7Z412234 IMP7Z492 IMP7Z422 IMP7P462234 IMR7P462104 IMR7P452234 IMR7Z462 IMP7P432075 IMR7Z492104 IMP7P4B2075 IMR7P432 IMR7P4B2 IMR7Z4B2075 IMP7Z412 IMR7P4B2075 IMR7Z422104 IMR7P492104 IMR7Z462234 IMR7P422104 IMP7Z472 IMP7Z462104 IMP7P472 IMR7Z462075 IMP7Z4B2 IMR7P462 IMP7P422234 IMP7P412234 IMR7Z432104 IMP7Z432 IMP7P412 IMR7P472104 IMR7P432075 IMP7P472234 IMP7Z4B2075 IMR7Z412 IMR7P412 IMR7P452 IMP7Z412075 IMP7Z472075 IMP7Z4B2234 IMR7Z4B2104 IMR7P462234 IMP7Z462234 IMP7P4B2234 IMR7Z4B2234 IMP7Z432075 IMP7Z472104 IMR7Z4B2 IMR7Z462104 IMP7P432234 IMR7P452075 IMP7P472075 IMP7Z452234 IMP7P492 IMR7P4B2104 IMR7Z412075 IMP7Z492075 IMR7Z472075 IMP7P492104 IMP7Z412104 IMR7Z452104 IMP7Z422075 IMP7Z452 IMR7Z432075 IMR7Z472234 IMR7Z452 IMP7P422 IMP7P452234 IMP7Z452075 IMP7Z422234 IMP7Z432104 IMP7P412104 IMR7Z422 IMP7P432104 IMR7P412075 IMR7P4B2234 IMR7P472075 IMP7P422075 IMR7Z422234 IMR7Z412104 IMR7Z472 IMR7P452104 IMR7P462075 IMR7Z422075 IMP7P452075 IMP7P462104 IMR7Z452234 IMP7Z462 IMR7P422 IMR7Z472104 IMR7P432104 IMP7P432