IMC-1210 www.vishay.com Vishay Dale Wirewound, Surface Mount Molded Inductors FEATURES • Printed marking • Molded construction provides superior strength and moisture resistance STANDARD ELECTRICAL SPECIFICATIONS • Compatible with vapor phase and infrared reflow soldering TEST FREQ. SRF DCR RATED DC I(NμHD). TOL. (LM &H Qz) MQIN . (MMIHNz.) M(AX). CU(mRAR)E (1N)T • T20ap00e/ reaenl,d E IAre-4e8l 1packaging for automatic handling, 0.010 20 % 50 30 1000 0.13 734 • Material categorization: for definitions of compliance 0.012 20 % 50 30 1000 0.14 707 please see www.vishay.com/doc?99912 0.015 20 % 50 30 1000 0.16 661 0.018 20 % 50 30 1000 0.18 624 0.022 20 % 50 30 1000 0.20 592 ELECTRICAL SPECIFICATIONS 0.027 20 % 50 30 1000 0.22 564 Inductance range: 0.01 μH to 220 μH 0.033 20 % 50 30 1000 0.24 540 0.039 20 % 50 30 1000 0.27 530 Special tolerances available upon request 0.047 20 % 50 30 1000 0.30 483 0.056 20 % 50 30 1000 0.33 470 Operating temperature: -55 °C to +125 °C 0.068 20 % 50 30 1000 0.36 450 0.082 20 % 50 30 900 0.40 450 Coilform material: Non-magnetic from 0.01 μH to 0.10 μH 0.10 20 % 50 30 700 0.44 450 Powdered iron from 0.12 μH to 100 μH 0.12 20 % 25.2 30 500 0.22 584 Ferrite from 120 μH to 220 μH 0.15 20 % 25.2 30 450 0.25 548 0.18 20 % 25.2 30 400 0.28 518 0.22 20 % 25.2 30 350 0.32 484 TEST EQUIPMENT 0.27 20 % 25.2 30 320 0.36 456 0.33 20 % 25.2 30 300 0.40 453 • HP4342A Q meter with Vishay Dale test fixture or equivalent 0.39 20 % 25.2 30 250 0.45 450 • HP4191A RF impedance analyzer (for SRF measurements) 0.47 20 % 25.2 30 220 0.50 450 0.56 20 % 25.2 30 180 0.55 450 • Wheatstone brigde 0.68 20 % 25.2 30 160 0.60 450 0.82 20 % 25.2 30 140 0.67 450 1.0 10 % 7.96 30 120 0.70 400 DIMENSIONS in inches [millimeters] 1.2 10 % 7.96 30 100 0.75 390 1.5 10 % 7.96 30 85 0.85 370 1.8 10 % 7.96 30 80 0.90 350 2.2 10 % 7.96 30 75 1.0 320 [02..02817 ± ± 0 0..200038] 0.030 0.006 2.7 10 % 7.96 30 70 1.1 290 [0.762] [0.152] 3.3 10 % 7.96 30 60 1.2 260 Typ. Ref. 3.9 10 % 7.96 30 55 1.3 250 Typ. 45..76 1100 %% 77..9966 3300 5405 11..56 222147 [03.1.2206 ± ± 0 0..200038] [01.0.0420] 6.8 10 % 7.96 30 40 1.8 204 0.098 ± 0.008 8.2 10 % 7.96 30 38 2.0 194 [2.49 ± 0.203] 0.028 ± 0.004 10 10 % 2.52 30 33 2.1 189 [0.711 ± 0.102] 12 10 % 2.52 30 30 2.5 173 Typ. 1158 1100 %% 22..5522 3300 2210 23..83 116541 [01R.0.8e75f3.] 0[3.1.01]8 22 10 % 2.52 30 19 3.7 145 27 10 % 2.52 30 18 5.0 122 Guidelines for 0.138 0.020 (1) 33 10 % 2.52 30 16 6.0 112 Parallel Component [3.5] [0.5] 39 10 % 2.52 30 15 7.0 104 Printed Circuit 47 10 % 2.52 30 14 9.0 91 Mounting Pads on 0.118 56 10 % 2.52 30 12 10.0 87 IMC-1210-100 [3.0] 68 10 % 2.52 30 11 11.0 83 Chip Inductors 82 10 % 2.52 30 10 12.0 79 0.039 0.039 100 10 % 0.796 20 9 14.0 73 [1.0] 0.070 [1.0] 120 10 % 0.796 15 8 11.0 70 Note [1.8] 150 10 % 0.796 15 6.5 15.0 65 (1) Recommended spacing between components 180 10 % 0.796 15 6 17.0 60 220 10 % 0.796 15 6 21.0 50 PART MARKING Note (1) Rated DC current based on the maximum temperature rise, not - Vishay Dale to exceed 40 °C at +85 °C ambient - Inductance value - Date code DESCRIPTION IMC-1210 10 μH ± 10 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M C 1 2 1 0 E R 1 0 0 K PRODUCT SIZE PACKAGE INDUCTANCE TOL. FAMILY CODE VALUE Revision: 02-Jun-15 1 Document Number: 34043 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000