IHD Vishay Dale Filter Inductors, High Current, Axial Leaded FEATURES • Printed circuit mounting (axial leads) • Protected by polyolefin tubing • High saturation bobbin used allowing high inductance with low DC resistance ELECTRICAL SPECIFICATIONS • Pre-tinned leads Inductance: Measured at 1.0 V with zero DC current • High resistivity core offers very high parallel resistance, Incremental Current: The typical current at which the resulting in maximum coil performance inductance will be decreased by 5 % from its initial zero DC • 20 sleeveless models available at reduced cost value • Compliant to RoHS Directive 2002/95/EC Dielectric Rating: 2500 V between winding and outer RMS circumference to within 0.250" [6.35 mm] of the insulating MECHANICAL SPECIFICATIONS sleeve edge Wire: Solid soft copper Operating Temperature: - 55 °C to + 125 °C (no load), Terminals: 20 AWG tinned copper leads - 55 °C to + 85 °C (at full rated current) Core Material: Ferrite Current Rating: Maximum continuous operating current Coating: Polyolefin tubing - flame retardant UL type VW-1 (DC or RMS) based on a 40 °C temperature rise per MIL-I-23053/5, class 3 requirements DIMENSIONS in inches [millimeters] 1.13 [28.70] B Max. Min. Typ. A Dia. Max. 0.032 [0.813] Dia. Typ. #20 AWG MODEL A (MAX.) B (MAX.) IHD-1 0.270 [6.85] 0.700 [17.78] IHD-3 0.460 [11.68] 0.900 [22.86] STANDARD ELECTRICAL SPECIFICATIONS IND. AT 1 kHz TOL. DCR MAX. RATED DC CURRENT MAX. INCREMENTAL CURRENT APPROX. MODEL (μH) (%) () (A) (A) IHD-1 1 ± 15 % 0.009 5.3 7.00 IHD-1 1.2 ± 15 % 0.010 5.0 6.40 IHD-1 1.5 ± 15 % 0.011 4.8 5.70 IHD-1 1.8 ± 15 % 0.012 4.6 5.20 IHD-1 2.2 ± 15 % 0.013 4.4 4.70 IHD-1 2.7 ± 15 % 0.014 4.2 4.30 IHD-1 3.3 ± 15 % 0.016 4.0 3.90 IHD-1 3.9 ± 15 % 0.017 3.8 3.60 IHD-1 4.7 ± 15 % 0.022 3.4 3.30 IHD-1 5.6 ± 15 % 0.024 3.2 3.00 IHD-1 6.8 ± 15 % 0.026 3.1 2.70 IHD-1 8.2 ± 15 % 0.028 3.0 2.50 IHD-1 10 ± 15 % 0.033 2.8 2.30 IHD-1 12 ± 15 % 0.037 2.6 2.10 IHD-1 15 ± 15 % 0.040 2.5 1.90 IHD-1 18 ± 15 % 0.044 2.4 1.70 IHD-1 22 ± 15 % 0.050 2.2 1.50 IHD-1 27 ± 15 % 0.070 1.9 1.40 IHD-1 33 ± 15 % 0.075 1.8 1.30 IHD-1 39 ± 15 % 0.084 1.7 1.20 IHD-1 47 ± 15 % 0.104 1.6 1.10 IHD-1 56 ± 15 % 0.130 1.4 0.97 IHD-1 68 ± 15 % 0.145 1.3 0.88 IHD-1 82 ± 15 % 0.152 1.3 0.80 IHD-1 100 ± 15 % 0.208 1.1 0.73 IHD-1 120 ± 15 % 0.283 0.94 0.66 IHD-1 150 ± 15 % 0.330 0.87 0.60 IHD-1 180 ± 15 % 0.362 0.83 0.54 IHD-1 220 ± 15 % 0.505 0.70 0.49 IHD-1 270 ± 15 % 0.557 0.67 0.45 IHD-1 330 ± 15 % 0.650 0.62 0.40 IHD-1 390 ± 15 % 0.770 0.57 0.37 IHD-1 470 ± 15 % 1.030 0.49 0.34 IHD-1 560 ± 15 % 1.140 0.47 0.31 Document Number: 34016 For technical questions, contact: magnetics@vishay.com www.vishay.com Revision: 04-Feb-11 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IHD Vishay Dale Filter Inductors, High Current, Axial Leaded STANDARD ELECTRICAL SPECIFICATIONS IND. AT 1 kHz TOL. DCR MAX. RATED DC CURRENT MAX. INCREMENTAL CURRENT APPROX. MODEL (μH) (%) () (A) (A) IHD-1 680 ± 15 % 1.500 0.41 0.28 IHD-1 820 ± 15 % 1.980 0.36 0.26 IHD-1 1000 ± 15 % 2.300 0.33 0.23 IHD-1 1200 ± 15 % 2.550 0.31 0.21 IHD-1 1500 ± 15 % 3.000 0.29 0.19 IHD-1 1800 ± 15 % 4.000 0.25 0.18 IHD-1 2200 ± 15 % 4.400 0.24 0.16 IHD-1 2700 ± 15 % 5.800 0.21 0.14 IHD-1 3300 ± 15 % 6.560 0.20 0.13 IHD-1 3900 ± 15 % 8.630 0.17 0.12 IHD-1 4700 ± 15 % 10.100 0.16 0.11 IHD-1 5600 ± 15 % 11.200 0.15 0.10 IHD-1 6800 ± 15 % 15.000 0.13 0.09 IHD-1 8200 ± 15 % 20.800 0.11 0.08 IHD-1 10 000 ± 15 % 23.400 0.10 0.08 IHD-1 12 000 ± 15 % 26.000 0.10 0.07 IHD-1 15 000 ± 15 % 36.000 0.08 0.06 IHD-1 18 000 ± 15 % 40.000 0.08 0.06 IHD-3 3.9 ± 15 % 0.007 4.0 8.20 IHD-3 4.7 ± 15 % 0.008 4.0 7.50 IHD-3 5.6 ± 15 % 0.011 4.0 6.90 IHD-3 6.8 ± 15 % 0.011 4.0 6.30 IHD-3 8.2 ± 15 % 0.013 4.0 5.70 IHD-3 10 ± 15 % 0.016 4.0 5.20 IHD-3 12 ± 15 % 0.018 4.0 4.70 IHD-3 15 ± 15 % 0.020 4.0 4.30 IHD-3 18 ± 15 % 0.022 4.0 3.90 IHD-3 22 ± 15 % 0.024 4.0 3.50 IHD-3 27 ± 15 % 0.025 4.0 3.20 IHD-3 33 ± 15 % 0.028 4.0 2.90 IHD-3 39 ± 15 % 0.031 4.0 2.70 IHD-3 47 ± 15 % 0.034 4.0 2.50 IHD-3 56 ± 15 % 0.043 3.2 2.30 IHD-3 68 ± 15 % 0.059 2.5 2.10 IHD-3 82 ± 15 % 0.066 2.0 1.90 IHD-3 100 ± 15 % 0.084 1.6 1.70 IHD-3 120 ± 15 % 0.113 1.6 1.60 IHD-3 150 ± 15 % 0.129 1.6 1.40 IHD-3 180 ± 15 % 0.150 1.6 1.30 IHD-3 220 ± 15 % 0.162 1.6 1.20 IHD-3 270 ± 15 % 0.226 1.6 1.10 IHD-3 330 ± 15 % 0.257 1.6 0.95 IHD-3 390 ± 15 % 0.288 1.6 0.88 IHD-3 470 ± 15 % 0.393 1.2 0.80 IHD-3 560 ± 15 % 0.504 1.0 0.74 IHD-3 680 ± 15 % 0.570 1.0 0.67 IHD-3 820 ± 15 % 0.643 0.8 0.61 IHD-3 1000 ± 15 % 0.844 0.8 0.56 IHD-3 1200 ± 15 % 0.977 0.6 0.51 IHD-3 1500 ± 15 % 1.180 0.6 0.46 IHD-3 1800 ± 15 % 1.500 0.6 0.42 IHD-3 2200 ± 15 % 1.760 0.5 0.38 IHD-3 2700 ± 15 % 2.130 0.4 0.34 IHD-3 3300 ± 15 % 2.530 0.4 0.31 IHD-3 3900 ± 15 % 2.840 0.4 0.29 IHD-3 4700 ± 15 % 3.790 0.4 0.26 IHD-3 5600 ± 15 % 4.240 0.32 0.24 IHD-3 6800 ± 15 % 5.750 0.25 0.22 IHD-3 8200 ± 15 % 6.440 0.25 0.20 IHD-3 10 000 ± 15 % 7.300 0.25 0.18 IHD-3 12 000 ± 15 % 9.340 0.20 0.17 IHD-3 15 000 ± 15 % 10.700 0.20 0.15 IHD-3 18 000 ± 15 % 14.800 0.16 0.14 IHD-3 22 000 ± 15 % 18.000 0.13 0.12 IHD-3 27 000 ± 15 % 22.700 0.13 0.11 IHD-3 33 000 ± 15 % 25.700 0.13 0.10 IHD-3 39 000 ± 15 % 29.700 0.10 0.09 IHD-3 47 000 ± 15 % 33.700 0.10 0.09 IHD-3 56 000 ± 15 % 38.000 0.10 0.08 IHD-3 68 000 ± 15 % 52.800 0.08 0.07 IHD-3 82 000 ± 15 % 67.300 0.07 0.07 IHD-3 100 000 ± 15 % 76.000 0.07 0.06 www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34016 2 Revision: 04-Feb-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IHD Filter Inductors, High Current, Axial Vishay Dale Leaded MARKING - Vishay Dale - Model - Inductance value - Date code ORDERING INFORMATION IHD-1 3.9 μH ± 15 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H D 1 E R 3 R 9 L MODEL PACKAGE INDUCTANCE INDUCTANCE CODE VALUE TOLERANCE Document Number: 34016 For technical questions, contact: magnetics@vishay.com www.vishay.com Revision: 04-Feb-11 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000