Data Sheet HSMx-A43x-xxxxx Surface Mount LED Indicator Description Features  Industry-standard PLCC-4 The Broadcom® Power PLCC-4 SMT LEDs with Lens are high-  High reliability LED package performance PLCC-4 package size SMT LEDs targeted mainly  High brightness using AllnGaP and InGaN dice technologies in Automotive and Electronic Signs and Signals (ESS) markets.  High optical efficiency These top-mount single-chip packages with focused radiation  Narrow viewing angle at 30° offer high brightness in beam direction and are excellent for  Available in 8-mm carrier tape on 7-inch reel interior automotive, indoor and outdoor sign and industrial  Compatible with both IR and TTW soldering process applications. With additional lens in 30° variants, these products are especially fitting to applications for traffic lights, Applications CHMSL, and displays. The PLCC-4 package family is able to dissipate heat better Interior automotive: compared to the PLCC-2 packages. In proportion to this  Instrument panel backlighting increase in driving current, this family of LEDs is able to  Central console backlighting produce higher light output compared to the conventional  Cabin backlighting PLCC-2 SMT LEDs.  Navigation and audio system  Dome lighting As an extension of the standard flat top PLCC-4 SMT LEDs, the  Push button backlighting Power PLCC-4 with Lens device is able to provide focused beams within narrow viewing angles (30°) meeting the market’s Exterior automotive: requirements for focused radiation and high brightness in beam  Turn signals directions.  CHMSL  Rear combination lamp The Power PLCC-4 SMT LED with 30° is ideal for panel, push  Side repeaters button, or general backlighting in automotive interior and exterior, sign, office equipment, industrial equipment, and Electronic signs and signals: home appliances applications. This package design, coupled  Interior and exterior full color sign with careful selection of component materials, allows the  Variable message sign Power PLCC-4 SMT LED with Lens to perform with higher  Garden lighting reliability in a larger temperature range –40 °C to 100 °C. This high reliability feature is crucial to allow the Power PLCC-4 Office automation, home appliances, industrial SMT LED with Lens to perform well in harsh environments, equipment: such as its target Automotive and ESS markets. The Power  Front panel backlighting PLCC-4 SMT LED with Lens package is also designed to be  Push button backlighting compatible with both IR-solder re-flow and through-the-wave  Display backlighting soldering. CAUTION! This LED is ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to application note AN- 1142 for additional details. Broadcom AV02-0208EN October 26, 2017

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator The Broadcom Power PLCC-4 SMT LED with 30° Lens carries the part number HSMx- A43x-xxxxx. The high brightness AlInGaP and InGaN dice technologies used provide the product brightness that meets the Automotive and ESS market requirements. The lens package will complement and complete the existing AlInGap and InGaN color standard Power- PLCC-4 LED that Broadcom offers, providing customers an extra lens option from one supplier. To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel is shipped in single intensity and color bin (except for red color), to provide close uniformity. Figure 1: Package Dimensions Source A 2.8 ± 0.2 3.87 max. 2.2 ± 0.2 0.1 TYP. 0.80 ± 0.1 +ve -ve 3.2 ± 0.2 3.5 ± 0.2 0.8 ± 0.3 -ve -ve 0.5 ± 0.1 0.7 ± 0.1 Package marking Figure 2: Package Dimensions Source B 2.8 (cid:114)0.2 3.87 max. 2.2 (cid:114)0.2 0.80 (cid:114)0.1 0.1 TYP. +ve -ve 3.2 (cid:114)0.2 3.5(cid:114)0.2 0.8(cid:114)0.3 -ve -ve 0.5(cid:114)0.1 0.7 (cid:114)0.1 Package marking NOTE: 1. All dimensions are in mm. 2. Electrical connection between all cathodes is recommended. Broadcom AV02-0208EN 2

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Device Selection Guide Test Current Dice Color Part Number Min. IV (mcd) Typ. IV (mcd) Max. IV (mcd) (mA) Technology Red HSMC-A430-W50M1 1125 2300 3550 50 AlInGaP HSMC-A431-X90M1 2240 4000 7150 50 AlInGaP HSMC-A431-Y70M1 3550 — 7150 50 AlInGaP HSMC-A431-Y80M1 3550 — 9000 50 AlInGaP Red Orange HSMJ-A430-W50M1 1125 2300 3550 50 AlInGaP HSMJ-A431-X90M1 2240 4500 7150 50 AlInGaP HSMJ-A431-X90M1 2240 — 7150 50 AlInGaP HSMJ-A431-Y70M1 3550 — 7150 50 AlInGaP Orange HSML-A431-X90M1 2240 4500 7150 50 AlInGaP Amber HSMA-A430-W90M1 1400 3000 4500 50 AlInGaP HSMA-A431-Y00M1 2850 5000 — 50 AlInGaP HSMA-A431-X90M1 2240 4700 7150 50 AlInGaP HSMA-A431-13NM1 7150 — 14000 50 AlInGaP HSMA-A431-Z50M1 4500 — 14000 50 AlInGaP HSMA-A431-Z5WM1 4500 — 14000 50 AlInGaP Green HSMM-A430-X90M2 2240 — 7150 30 InGaN HSMM-A430-Y3YM2 2850 — 5600 30 InGaN HSMM-A430-Y7YM2 3550 — 7150 30 InGaN Blue HSMN-A430-V50M2 715 — 2240 30 InGaN HSMN-A430-V7YM2 900 — 1800 30 InGaN NOTE: 1. The luminous intensity, I , is measured at the mechanical axis of the lamp package. The actual peak of the V spatial radiation pattern might not be aligned with this axis. 2. I tolerance is ±12%. V Broadcom AV02-0208EN 3

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Part Numbering System H S M x - A x x x - x x x x x 1 2 3 4 5 6 7 8 9 Code Description Option x LED Chip Color C Red 1 J Red Orange L Orange A Amber M Green N Blue x Package Type 4 PLCC-4 2 x x Device Specific Configuration 3 4 x Minimum Intensity Bin Limits Refer Intensity Bin Limit 5 x Intensity Bin Select 0 Full Distribution 6 2 2 half bins starting from X 1 5 3 3 half bins starting from X 1 5 4 4 half bins starting from X 1 5 5 5 half bins starting from X 1 5 6 2 half bins starting from X 2 5 7 3 half bins starting from X 2 5 8 4 half bins starting from X 2 5 9 5 half bins starting from X 2 5 x Color Bin Select 0 Full Distribution 7 Z A and B only Y B and C only W C and D only V D and E only U E and F only T F and G only S G and H only Q A, B and C only P B, C and D only N C, D and E only M D, E and F only L E, F and G only K F, G and H only 1 A, B, C and D only 2 E, F G and H only x x Packaging Option M1 50-mA test current, top mount, 13 inch reel size 8 9 M2 30-mA test current, top mount, 13 inch reel size Broadcom AV02-0208EN 4

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Intensity Bin Limits Amber Min. (nm) Max. (nm) A 582.0 584.5 Bin ID Min. IV (mcd) Max. IV (mcd) B 584.5 587.0 U1 450.00 560.00 C 587.0 589.5 U2 560.00 715.00 D 589.5 592.0 V1 715.00 900.00 E 592.0 594.5 V2 900.00 1125.00 F 594.5 597.0 W1 1125.00 1400.00 W2 1400.00 1800.00 Orange Min. (nm) Max. (nm) X1 1800.00 2240.00 A 597.0 600.0 X2 2240.00 2850.00 B 600.0 603.0 Y1 2850.00 3550.00 C 603.0 606.0 Y2 3550.00 4500.00 D 606.0 609.0 Z1 4500.00 5600.00 E 609.0 612.0 Z2 5600.00 7150.00 11 7150.00 9000.00 12 9000.00 11250.00 Red/ Orange Min. (nm) Max. (nm) 21 11250.00 14000.00 A 611.0 616.0 22 14000.00 18000.00 B 616.0 620.0 Tolerance of each bin limit = ±12%. Red Min. (nm) Max. (nm) Color Bin Limits Full Distribution Forward Voltage Bin Table Blue Min. (nm) Max. (nm) A 460.0 465.0 For HSMV-A43x-xxxxx only. B 465.0 470.0 C 470.0 475.0 Bin Min. (V) Max. (V) D 475.0 480.0 VA 1.9 2.2 VB 2.2 2.5 Cyan Min. (nm) Max. (nm) VC 2.5 2.8 A 490.0 495.0 VD 2.8 3.1 B 495.0 500.0 VE 3.1 3.4 C 500.0 505.0 D 505.0 510.0 Tolerance for each bin limit = ±0.1V. Green Min. (nm) Max. (nm) A 515.0 520.0 B 520.0 525.0 C 525.0 530.0 D 530.0 535.0 Broadcom AV02-0208EN 5

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Absolute Maximum Ratings (T = 25°C) A Parameters HSMC/A HSMV HSMK/M/N Unit DC Forward Currenta 70 70 30 mA Peak Forward Currentb 200 200 90 mA Power Dissipation 180 240 114 mW Reverse Voltage 5 5 4 V Junction Temperature 110 °C Operating Temperature –40 to +100 °C Storage Temperature –40 to +100 °C a. Derate linearly as shown in Figure7 and Figure8. b. Duty factor = 10%, frequency = 1 kHz. Optical Characteristics (T = 25°C) A Peak Dominant Luminous Wavelength, Wavelength, Viewing Angle, Efficacy, η c V λPEAK (nm) λDa (nm) 2θ½b(Degrees) (lm/W) Color Part Number Dice Technology Typical Typical Typical Typical Red HSMC-A43x AlInGaP 635 626 30 150 Red Orange HSMJ-A43x AlInGaP 621 615 30 240 HSMV-A430 AlInGaP 623 617 30 263 Orange HSML-A431 AlInGaP 609 605 30 320 Amber HSMA-A43x AlInGaP 592 590 30 480 Green HSMM-A430 InGaN 518 525 30 500 Blue HSMN-A43X InGaN 468 470 30 75 Cyan HSMK-A43X InGaN 500 502 30 285 a. The dominant wavelength, λ , is derived from the CIE Chromaticity Diagram and represents the color of the device. D b. θ is the off-axis angle where the luminous intensity is ½ the peak intensity. ½ c. Radiant intensity, I in watts/steradian, may be calculated from the equation I = I /η , where I is the luminous intensity in candelas and η e e V V V V is the luminous efficacy in lumens/watt. Electrical Characteristics (T = 25°C) A Forward Voltage, V (Volts) at I = 50 mA Reverse Voltage, V at 100 µA Reverse Voltage, V at 10 µA F F R R Part Number Min. Typ. Max. Min. Min. HSMC/J/L/A 1.7 2.2 2.5 5 — HSMV 1.7 2.8 3.4 5 — Forward Voltage V (Volts) at I = 30 mA Reverse Voltage V at 100 µA Reverse Voltage V at 10 µA F F R R Part Number Minimum Typical Maximum Minimum Minimum HSMK/M/N 2.7 3.9 4.6 — 5 Broadcom AV02-0208EN 6

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 3: Relative Intensity vs. Wavelength 1 InGaN Cyan 0.8 Y InGaN AlInGaP Amber T SI Green N0.6 TE InGaN N AlInGaP Orange E I Blue TIV0.4 A AlInGaP Red Orange L E R 0.2 AlInGaP Red 0 380 430 480 530 580 630 680 730 780 WAVELENGTH - nm Figure 4: Forward Current vs. Forward Voltage 80 70 HSMC/J/L/A HSMV A 60 m NT - 50 E R R 40 U C RD 30 A W R 20 O F HSMK/M/N 10 0 0 1 2 3 4 5 FORWARD VOLTAGE - V Figure 5: Relative Intensity vs. Forward Current (AlInGaP) Figure 6: Relative Intensity vs. Forward Current (InGaN) 1.4 1.2 TY 1.2 TY 1.0 NSIA) NSIA) Em 1.0 Em NT0 NT0 0.8 US IAT 5 0.8 US IAT 3 LATIVE LUMINO(NORMALIZED 000...246 LATIVE LUMINO(NORMALIZED 000...246 E E R R 0 0 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 0 5 10 15 20 25 30 35 DC FORWARD CURRENT - mA DC FORWARD CURRENT - mA Broadcom AV02-0208EN 7

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 7: Maximum Forward Current vs. Ambient Figure 8: Maximum Forward Current vs. Ambient Temperature. Derated Based on TJmax = 110 °C (AlInGaP) Temperature. Derated Based on TJmax = 110 °C (InGaN) 80 35 mA 70 mA 30 – – 300C/W NT 60 300C/W NT 25 RRE 50 350C/W RRE 350C/W RD CU 40 RD CU 20 470C/W WA 470C/W WA 15 R 30 R O O M F 20 M F 10 U U M M AXI 10 AXI 5 M M 0 0 0 20 40 60 80 100 120 0 20 40 60 80 100 120 AMBIENT TEMPERATURE – C AMBIENT TEMPERATURE – C Figure 9: Radiation Pattern 1 0.9 0.8 TY 0.7 SI N E 0.6 T N D I 0.5 E Z ALI 0.4 M R O 0.3 N 0.2 0.1 0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES Broadcom AV02-0208EN 8

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 10: Recommended Soldering Pad Pattern (IR Reflow) X X 2.60 (0.103) 0.40 (0.016) 1.10 (0.043) 0.50 Y (0.020) 4.50 (0.178) 1.50 (0.059) Y REPRESENTS ELECTRICAL DIMENSIONS IN mm (INCHES). SOLDER RESIST CONNECTIVITY BETWEEN PADS Figure 11: Recommended Soldering Pad Pattern (TTW) X X 6.1 (0.240) 0.5 (0.020) 2.8 (0.110) Y 2.0 (0.079) 6.0 (0.236) 2.0 (0.079) 1.0 (0.039) 3.0 (0.118) Y DIMENSIONS IN mm (INCHES). REPRESENTS ELECTRICAL SOLDER RESIST CONNECTIVITY BETWEEN PADS Broadcom AV02-0208EN 9

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 12: Soft Tip Vacuum Pick-Up Tool for Extracting SMD Figure 13: Recommended Pb-Free Reflow Soldering Profile LED Components from Carrier Tape Vacuum Pick-up Tool 10 to 20 SEC. 255 °C +5°C 217°C -0°C -6°C/SEC MAX. E 3°C/SEC MAX. R Nozzle Inner Diameter TU 125°C +/- 25°C A size: 1.0 to 1.5 mm Soft Tip PER M E T 60-150 SEC. MAX. 120 SEC. 1.25mm TIME Radius Contour Figure 14: Recommended Wave Soldering Profile TURBULENT WAVE LAMINAR WAVE BOTTOM SIDE HOT AIR KNIFE OF PC BOARD 250 TOP SIDE OF PC BOARD 200 CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) C – PREHEAT SETTING = 150 C (100 C PCB) RE 150 SOLDER WAVE TEMPERATURE = 245 C U AT AIR KNIFE AIR TEMPERATURE = 390 C ER FLUXING AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) MP AIR KNIFE ANGLE = 40 TE 100 SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY 50 COOLED BEFORE EXERTING MECHANICAL FORCE. 30 PREHEAT 0 10 20 30 40 50 60 70 80 90 100 TIME – SECONDS Broadcom AV02-0208EN 10

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 15: Tape Leader and Trailer Dimensions TRAILER COMPONENT LEADER 200 mm MIN. FOR O 180 REEL. 480 mm MIN. FOR O180 REEL. 200 mm MIN. FOR O 330 REEL. 960 mm MIN. FOR O 330 REEL. C A USER FEED DIRECTION Figure 16: Tape Dimensions 8.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 O 1.50 ± 0.10 1.75 ± 0.10 12.00 + 0.30 5.50 ± 0.05 - 0.10 .388 ± 0.02 32° MAX 32° MAX 8° MAX 8° MAX 1.24 3.52 ± 0.10 3.00 ± 0.10 3.70 ± 0.10 Broadcom AV02-0208EN 11

HSMx-A43x-xxxxx Data Sheet Surface Mount LED Indicator Figure 17: Reeling Orientation  Control of assembled boards: If the PCB soldered with the LEDs is to be subjected to USER FEED DIRECTION other high-temperature processes, store the PCB in a sealed MBB with desiccant or desiccator at <5% RH to ensure that all LEDs have not exceeded their floor life of 672hours.  Baking is required if: – The HIC indicator indicates a change in color for 10% and 5%, as stated on the HIC. CATHODE SIDE – The LEDs are exposed to conditions of >30°C/60% RH at any time. – The LED's floor life exceeded 672hours. The recommended baking condition is 60°C ± 5ºC for 20hours. PRINTED LABEL Baking can only be done once. Handling of Moisture-Sensitive Devices This product is qualified as Moisture Sensitive Level 2a per JEDEC J-STD-020. The following precautions for handling this moisture-sensitive product will help to ensure the reliability of the product. Refer to Broadcom Application Note AN5305, Handling of Moisture Sensitive Surface Mount Devices, for details.  Before use: – An unopened moisture barrier bag (MBB) can be stored at <40°C/90% RH for 12 months. If the actual shelf life has exceeded 12 months and the humidity indicator card (HIC) indicates that baking is not required, it is safe to reflow the LEDs per the original MSL rating. – Do not open the MBB prior to assembly (for example, for IQC).  Control after opening the MBB: – Read the HIC immediately upon opening of MBB. – Keep the LEDs at <30°C/60% RH at all times, and complete all high temperature-related processes, including soldering, curing, or rework within 672hours.  Control for unfinished reel: Store unused LEDs in a sealed MBB with desiccant or a desiccator at <5% RH. Broadcom AV02-0208EN 12

Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU. Copyright © 2017 by Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B roadcom Limited: HSMM-A430-X90M2 HSMA-A430-W90M1 HSMA-A431-X90M1 HSMA-A431-Y00M1 HSMC-A430-W50M1 HSMC- A431-X90M1 HSMJ-A430-W50M1 HSMJ-A431-X90M1 HSML-A431-X90M1 HSMV-A430-Y90M1 HSMA-A431- Z50M1 HSMA-A431-Z5WM1 HSMC-A431-Y80M1 HSMM-A430-W9PM2 HSMN-A430-V50M2