REVISION BW DESIGNED & DIMENSIONED HSEC8-1XXX-XX-XX-DV-X-XX IN MILLIMETERS No OF POSITIONS (PER ROW) OPTION 2 (INCHES FOR REFERENCE ONLY) -10, -20, -30 (SEE FIG 1) **-PE: PASS THROUGH (SHT 7, FIG 7) ■-09, -13, -25, -37, -49, -40, -50, -60, -70, (10, 13, & 20 POS ONLY) DO NOT -80, -90, -100 (SEE FIG 2, SHT 2) (-A OPTION ONLY) SCALE FROM (NOT AVAILABLE WITH ANY OTHER OPTION THIS PRINT (No OF POS x 0.800 [.0315]) + 4.600 [.1811] 1.126 CARD THICKNESS 2, EXCEPT -K AND/OR -TR & -FR) (SEE TABLE 9, SHT 3) **-BL: BOARD LOCK (SHT 5, FIG 5) (SEE NOTE 11) (No OF POS x 0.800 [.0315]) + 1.400[.0551] REF -01: 1.57 [.062] CARD (-A OPTION ONLY) -03: 2.36 [.093] CARD **-GR: GUIDE RAILS (SHT 6, FIG 6) C (10-100 POS, MULTIPLES OF 10 ONLY) (10-60 POS, MULTIPLES OF 10 ONLY) (No OF POS -1 ) x 0.800 [.0315]±0.100 (-K & -TR ONLY FOR OPTION 2) (SEE NOTE 11)(-TR & -FR PACKAGING ONLY) 2.70 .106 (USE RHSEC8-XXX-03-DV-XX) -WT: WELD TAB (SHT 7, FIG 8) (SEE NOTE 7 & 10) (-A OPTION ONLY) REF C **-L: LATCHING (SHT 4, FIG 4) 02 60 (13, 25, 37, & 49 POS ONLY) (SEE NOTE 11) 0.800±0.100 .0315±.0039 (-A OPTION ONLY) (TOL NON ACCUM) "A" **-L2: ECDP LATCHING (SHT 8, FIG 9) CL PLATING SPECIFICATION ((0-A9 ,O 13P,T I2O5N, & O 4N9L PYO)S ONLY) (SEE NOTE 11) -SM: 30µ" SELECTIVE GOLD IN CONTACT -K: POLYIMIDE FILM PAD (SEE SHT 2, FIG 3) AREA, MATTE TIN ON TAIL -TR: TAPE & REEL (SEE NOTE 16) P" REF "Q" REF "T"' REF -H: 30µ" HEAVY GOLD IN CONTACT (09 THRU 70 POS ONLY) AREA, 3µ" GOLD TAIL) -FR: FULL REEL QTY. TAPE & REEL (SEE NOTE 15) -S: 30µ" SELECTIVE GOLD IN CONTACT (09 THRU 70 POS ONLY) AREA, MATTE TIN ON TAIL (LEAVE BLANK FOR TRAY) -L: 10µ" LIGHT SELECTIVE GOLD IN 01 "A" 59 CONTACT AREA, MATTE TIN ON TAIL OPTION 1 ROW SPECIFICATION (LEAVE BLANK FOR NO ALIGNMENT PIN, POSITION #1 XHSEC8X-XXX-XX-DV-XX -DV: DOUBLE VERTICAL USE XHSEC8-XXX-01-DV-LC, NOT INDICATOR CL AVAILABLE FOR CARD THICKNESS -02 & -03 SEE FIG 10, SHT 3) -A: ALIGNMENT PIN (USE XHSEC8X-XXX-XX-DV-A) 7.80 .307 ** = AVAILABLE ONLY WITH -01 CARD THICKNESS ■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT, & -L2 REF 1.32 .052 REF (SOME FEATURES NOT (2 PLCS) SEE NOTE 12 SHOWN FOR CLARITY) C "V"+0.09 "V"+.004 3.60 .142 1.12 .044 REF (TYP) C-188-XX-XX -0.26 -.010 REF (No OF POS x 0.800[.0315]) + 2.200[.0866] REF "W" REF 1.50 .059 2.92 .115 REF REF C CL 3.03 .119 7.98±0.15 .314±.006 (TYP) REF SEE TABLE 1 C C CL 0.800±0.100 .0315±.0039 "Y"±0.20 "Y"±.008 (TOL NON ACCUM) NOTES: C FIG 1 SECTION "A"-"A" ((No OF POS -1 ) x 0.800 [.0315])±0.08 1. C REPRESENTS A CRITICAL DIMENSION. FOR POSITIONS -10, -20 & -30 2. BURR ALLOWANCE: 0.04[.0015] MAX. HSEC8-130-01-XX-DV-A SHOWN 3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS. (SOME FEATURES NOT SHOWN FOR CLARITY) 4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP. 5. ASSEMBLIES TO BE PACKAGED IN TRAYS, UNLESS -TR IS SPECIFIED. (SEE NOTE 12) F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW 6. NOTE DELETED. UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * 7. MATING EDGE CARD THICKNESS TOLERANCE TO BE ±0.15 [.006] OF NOMINAL. DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS CONFIDENTIAL AND 8. NOTE DELETED. PROPRIETARY INFORMATION AND ALL DESIGN, 9. NOTE DELETED. TOLERANCES ARE: MANADN SUAFLAECST RUIRGIHNTGS, ARERPER EOXDPRUECSTSIOLYN R, EUSSEER, VPEADT EBNYT S RAIMGHTETCS, 10. MATING CARD MUST HAVE LEAD-IN. SEE SAMTEC FOOTPRINT FOR SPECIFICATIONS. DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE 1 1 12 .. CLL2,O ,L OR2N,R &E BR BL VLT YOISP INDE OSU SAT EAT. VPPELNICDAOBRL ED IFSOCRR EGTIUOIDNE, ARANIDL TMYAPEY UOSRE .M GARY NNOOTT ABPEP PLRICESAEBNLTE. FOR L, ...XXX:XX :X : .3 . 1.[03.05 [11.]0 [ 0 . 05 0] 2 0 ] 2 OROWETRRPH PIRTEAOTRRED PTNUR, CCTOOEOJDE NAC,S NTTE RYINN AUT NA NOSNAFFYUE S RTMARHMAEONDTREN OICZERE,R IDI NWN PCCIE.TORHRSOPOOUNTR O ATRTH EEEDN E ITXNIPT ARYEN NSYOS R 5Pe2H-M0O aPNAilE: R:i nK8f 1oE2A@-9SST4A 4BM-L6VT7ED3C3, . Nc E o W m F A A X L :B 8A 1cN2oY-d9, 4eIN8: -54557031425720 13. MEASURE DIMENSION WITH LATCH IN LOCKED, PERPENDICULAR POSITION. MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 DESCRIPTION: 14. VOID WIDTH, LOCATION, AND FREQUENCY TO BE AT VENDORS DISCRETION. INSULATOR: LCP, 0.8mm HIGH SPEED EDGE CARD ASSEMBLY COLOR: -01 CARD THICKNESS BLACK, 15. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, -02 & -03 CARD THICKNESS NATURAL DWG. NO. BASED ON OPTIONS SELECTED. CONTACT: BeCu HSEC8-1XXX-XX-XX-DV-X-XX 16. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING TO THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM BY: BRATCHER 01/24/03 SHEET 1 OF 8

REVISION BW FIG 3 -K OPTION (SOME FEATURES NOT SHOWN FOR CLARITY) 8.11 .319 "R" (No OF POS x 0.800[.0315]) + 7.800[.3071] REF C "D" REF "S" 2.70 .106 REF 02 "G" REF "A" REF 120 "H" 0.51 .020 "K" K-DOT-.XXX-.XXX-.XXX 01 119 4.00 .157 C "B" SPACES @ .800 = "C"±0.100 C C (No OF POS + 3) x 0.800[.0315]±0.100 ((No OF POS + 6) x 0.800[.0315]) + 0.600[.0236] REF CL 13.83±0.15 .545±.006 C [(No OF POS + 3) x 0.800[.0315] 0.100 "U" 0.13 IN-PROCESS ■ FIG 2 FOR POSITIONS ■ **-09, **-13, **-25, **-37, * PROPRIETARY NOTE * -40, **-49, -50, -60, -70, -80, -90, -100 THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, HSEC8-160-01-XX-DV-A SHOWN MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE (SOME FEATURES NOT SHOWN FOR CLARITY) OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 (** = AVAILABLE ONLY WITH OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 -01 CARD THICKNESS) DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 2.25:1 HSEC8-1XXX-XX-XX-DV-X-XX ■ = AVAILABLE ONLY WITH END OPTIONS -BL, -WT & -L2 F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 2 OF 8

REVISION BW 0.635 .025 MAX C CL 3 MAX SWAY (TYP) 7.80 .307 REF FIG 10 C-188-XXX-X IN-PROCESS VIEW **NON-ALIGNMENT PIN OPTION HSEC8-130-01-XX-DV SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (** = AVAILABLE ONLY WITH -01 CARD THICKNESS) (SOME FEATURES NOT SHOWN FOR CLARITY) * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 2:1 HSEC8-1XXX-XX-XX-DV-X-XX F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 3 OF 8

REVISION BW (No OF POS x 0.80[.0315]) + 18.40[.724] REF "D" "C" "C" RHSEC8-XXX-01-DV-XX-L "D" WT-25-02-T C 1.59 .063 C-188-02-X C 0.25 .010 REF 0.64 .025 REF (No OF POS x 0.80[.0315]) + 14.90[.587] 2 MAX SWAY SECTION "C"-"C" SECTION "D"-"D" (EITHER DIRECTION) FIG 4 **-L: LATCHING OPTION TH*IS DOCUMENTP CROONTPARINIES TCAONRFYID ENNOTIATLE AND * HSEC8-137-01-XX-DV-A-L SHOWN PROPRIETARY INFORMATION AND ALL DESIGN, AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY MANADN SUAFLAECST RUIRGIHNTGS, ARERPER EOXDPRUECSTSIOLYN R, EUSSEER, VPEADT EBNYT S RAIMGHTETCS, (NOT AVAILABLE FOR -GR TYPE USE) INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2) ORERP PRAORDTU, CTOED A, NTRY AUNNSAFUERTRHEODR OIZRE DIN PCEORRSPOONR OART EEDN ITNIT AYN NYO R 5P2H0O PNAER: K8 1E2A-9ST4 4B-L6V7D33, N E W F AAXL:B 8A1N2Y-9, 4IN8 -457014570 (** (=S OAMVAE IFLEAABTLUE ROENS LNYO WT ISTHHO -0W1 NC FAORRD CTHLIACRKITNYE)SS) OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 3:1 HSEC8-1XXX-XX-XX-DV-X-XX F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 4 OF 8

REVISION BW "E" REF "F" "H" "E" "E" "H" "F" C 1.325 .0522 2.1±0.40 .083±.016 RHSEC8-XXX-01-DV-XX-BL LTC-04 WT-25-02-T 12.20 .480 REF 1.48 .058 C 0.25 .010 C C-188-02-X 2 MAX SWAY 0.64 .025 REF (TYP) "F" (EITHER DIRECTION) REF SECTION "E"-"E" SECTION "H"-"H" SECTION "F"-"F" FIG 5 **-BL: BOARD LOCK OPTION HSEC8-160-01-XX-DV-A-BL SHOWN * PROPRIETARY NOTE * (NOT AVAILABLE FOR -GR TYPE USE) THIS DOCUMENT CONTAINS CONFIDENTIAL AND (FOR -09, -13, -25, 37, -40, -49, -50, -60, -70, -80, -90 & -100 PMRAONPURFIEATCATRUYR IINNFGO, RRMEPARTOIODNU CATNIODN A,L UL SDEE, SPIAGTNE, NT RIGHTS POSITIONS DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, (FOR -10, -20 & -30 POSITIONS DIFFERENT AS SHOWN, IONRC .P TAHRITS, DTOO CAUNMY EUNNTA SUHTAHLOL RNIZOETD B PEE DRISSOCNLO OSRED E,N INTI TWY HNOOLRE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OTHERWISE SAME AS FIG 1) REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 (** = AVAILABLE ONLY WITH -01 CARD THICKNESS) OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 (SOME FEATURES NOT SHOWN FOR CLARITY) DESCRIPTION: (AVAILABLE IN ALL POSITIONS) DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 2.5:1 HSEC8-1XXX-XX-XX-DV-X-XX F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 5 OF 8

REVISION BW 0.70 .027 REF 2.30 .090 REF 4.40 .173 "J" REF 1.75 .069 REF RHSEC8-XXX-01-DV-XX-GR 11.75 .463 REF "J" C-188-02-X SECTION "J"-"J" FIG 6 **-GR: GUIDE RAILS OPTION HSEC8-160-01-XX-DV-A-GR SHOWN AVAILABLE IN -10, -20, -30, -40, -50, & -60 POSITIONS ONLY (NOT AVAILABLE FOR -L; -BL TYPE USE) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2) * PROPRIETARY NOTE * (SOME FEATURES NOT SHOWN FOR CLARITY) THIS DOCUMENT CONTAINS CONFIDENTIAL AND (** = AVAILABLE ONLY WITH -01 CARD THICKNESS) PMRAONPURFIEATCATRUYR IINNFGO, RRMEPARTOIODNU CATNIODN A,L UL SDEE, SPIAGTNE, NT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 2:1 HSEC8-1XXX-XX-XX-DV-X-XX F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 6 OF 8

REVISION BW (No OF POS x 0.800 [.0315]) + 7.000 [.2756] REF CL "G" HSEC8-XX-01-DV-A-PE 0.56+-00..0390 .022+-..000142 C C-188-01-X "G" (No OF POS X 0.80[.032]) SECTION "G"-"G" + 4.60[.18] REF FIG 7 **-PE: PASS THROUGH OPTION HSEC8-120-01-XX-DV-A-PE SHOWN AVAILABLE IN -10, *-13 & -20 POSITIONS ONLY (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (SOME FEATURES NOT SHOWN FOR CLARITY) ** = AVAILABLE ONLY WITH -01 CARD THICKNESS *-13 IS A ONE BANK PART "J" REF "L" RHSEC8-XXX-XX-DV-A-WT WT-25-02-T "L" C 1.48 .058 0.64 .025 REF SECTION "L"-"L" 0.25 .010 REF (TYP) C C-188-02-X 2 MAX SWAY "F" (EITHER DIRECTION) (SEE TABLE 4, SHT 5) FIG 8 -WT: WELD TAB OPTION * PROPRIETARY NOTE * HSEC8-160-01-XX-DV-A-WT SHOWN THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, AVAILABLE IN ALL POSITIONS MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS (-A OPTION REQUIRED) AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2) OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 (SOME FEATURES NOT SHOWN FOR CLARITY) REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 2.5:1 HSEC8-1XXX-XX-XX-DV-X-XX F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW BY: BRATCHER 01/24/03 SHEET 7 OF 8

REVISION BW (No OF POS X 0.80[.031]) + 13.66 [.538] REF BOTH WT'S LANCE SHOULD FACE TO OUTSIDE 'N' RHSEC8-XXX-01-DV-XX-L2 "M" WT-25-09-X 1.48 .058 C C-188-02-X "M" 0.25 .010 2 MAX SWAY REF (TYP) 0.64 .025 (EITHER DIRECTION) REF C (No OF POS X 0.80[.031]) + 8.59 [.338] SECTION "M"-"M" (No OF POS X 0.800[.031]) + 11.090 [.4366] REF 1.50 .059 REF FIG 9 **-L2: ECDP LATCHING OPTION HSEC8-125-01-XX-DV-A-L2 SHOWN (AVAILABLE IN 9, 13, 25, & 49 POS ONLY) (NOT AVAILABLE FOR -GR TYPE USE) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 2) DETAIL 'N' (SOME FEATURES NOT SHOWN FOR CLARITY) SCALE 10 : 1 (** = AVAILABLE ONLY WITH -01 CARD THICKNESS) F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. DESCRIPTION: DO NOT SCALE DRAWING 0.8mm HIGH SPEED EDGE CARD ASSEMBLY DWG. NO. SHEET SCALE: 3:1 HSEC8-1XXX-XX-XX-DV-X-XX BY: BRATCHER 01/24/03 SHEET 8 OF 8