Push-on Bayonet Lock Miniature Waterproof Connectors HR34B Series Push-on Bayonet Lock Mating : Just inserting plug unit will complete mating d. e Un-mating : Rotating sleeve to unlock mating v r e s e R s ht g Ri All fig.1 D. O., LT ■Features Cable exit directions 1. Water and dust protection C C • IP67 or more (IP68) water and dust protection rating when RI fully mated. T C • Resistant to industrial grade oils. E L • 4-position receptacles are sealed against water penetration E when mounted on the panel - no protective cap is required. E S 2. Easy and precise mating O R • Mating: Just inserting plug unit completes mating HI Unmating: Rotating sleeve counterclockwise unlocks 8 1 connectors (fig.1) 0 2 • Marking helps align plug with receptacle when mating. ht • 3 guide keys make blind mating possible. pyrig (Rreecceepptatcalcel ete rsmtriuncatlsu)re prevents plug from damaging fig.2 o C 3. Multi-directional cable exit 18 Right angle plugs allow the cable to exit in 8 directions, in 20 45˚ increments.(fig.2) 1. 4. Safty standards c. e D The 4-position connectors meet requirements of TU¨V standard. 5. Wide variation Item Number of positions 4,10 Connector type straight plug,right angle plug,receptacle Terminations(plug) solder,crimp Terminations(receptacle) wire solder Conduit material plastic,metal Applicable cable size(Reference) (Ø5.7~6.5), (Ø6.5~7.3), (Ø8.0~9.0) 2016.14 1

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors ■Product Specifications 10 pos. : 3A Current rating Operating temperature range -25°C to 125°C 4 pos. :5A Ratings 10 pos. : 200V AC, 250V DC Voltage rating 4 pos. : 200V AC, 200V DC (Pollution degree 3) Storage temperature range -10°C to 60°C 400V AC, 400V DC (Pollution degree 2) Item Specification Conditions 1.Contact resistance 20mø max. 1A DC 2.Insulation resistance 1,000Mø min. 500V DC 10 pos.: 900V AC / 1 minute 3.Withstanding voltage No flashover or insulation breakdown 4 pos. : 2,000V AC / 1 minute Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75 4.Vibration No electrical discontinuity of 10μs or longer mm, 98m/s2each, 3 hours in 3 axis. d. 5.Shock No electrical discontinuity of 10μs or longer Acceleration of 490 m/s2, 11 ms duration, e 3 axis, each for 3 hours v r 6.Durability e Contact resistance : 30mø max. 500 cycles es (Mating / un-mating) R s Temperature: -55°C /+15° to +35°C /+85°C /+15° to +35°C ht 7.Temperature cycle Insulation resistance : 500Mø min. Time :-30 min. /2 to 3 min. /30 min. /2 to 3 min. g 5 cycles Ri All 8.Humidity Insulation resistance : 50Mø min. (at high humidity) 336 hours at 71°C, and humidity of 95% D. Insulation resistance : 500Mø min. (when dry) T L 9.Water protection No water penetration inside connector At the depth of 1meters for 0.5 hours. O., C C ■Materials / Finish RI ●Plugs T C E Part Material Finish Remarks EL Outer shell Zinc alloy, aluminum alloy, and Black chrome plating, black chromate --------------- E polyamide resin (black) finish (Trivalent Chromium) S Insulator PPS Color : Black UL94V-0 O R 10 pos. Phosphor bronze Gold plated --------------- HI Female contacts 4 pos. Copper alloy Silver plated --------------- 8 01 OGa-rsinkget FNliutroilreo hruybdbriedre, rubber --------------- --------------- 2 ht ●Receptacles g yri Part Material Finish Remarks p o Black chromate finish C Outer shell Zinc alloy --------------- (Trivalent Chromium) 18 Insulator PPS Color : Black UL94V-0 0 2 10 pos. Copper alloy Gold plated --------------- 1. Male contacts 4 pos. Brass Silver plated --------------- c. e Ground contact 4 pos. Brass Silver plated --------------- D O-ring Fluororubber --------------- --------------- 2

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors ■ Product Number Structure ●Plugs HR34B - 12 WP A - 10 S - X (****) 1 2 3 4 5 6 7 8 1 Series name : HR34B Series 5 Number of contacts. 2 Shell size : Diameter(mm) of the mating interface of the plug (Excluding ground contacts) 3 Shell style WP : Straight plug 6 Contact type WLP: Right-angle plug S : Female, wire solder 4 Conduit material and Applicable cable size SC : Female, crimp A : Conduit material metal, Applicable cable (Reference) : (Ø5.7~6.5) 7 Keying B : Conduit material metal, Applicable cable (Reference) : (Ø6.5~7.3) Blank: Standard d. D: Conduit material plastic, Applicable cable (Reference) : (Ø5.7~6.5) X : X key position e E: Conduit material plastic,Applicable cable (Reference): (Ø6.5~7.3) 8 Other specifications : 2 numerical digits wil be added when v er K: Conduit material metal, Applicable cable (Reference) : (Ø8.0~9.0) there is a specifications change other es than shown in positions qto u R s ht ●Receptacles g Ri All HR34B - 12 WR A - 10 P - X (****) D. 1 2 3 4 5 6 7 8 T L O., 1 Series name : HR34B Series 5 Number of contacts. C 2 Shell size : Diameter(mm) of the mating interface of the plug (Excluding ground contacts) C 3 Shell style WR : Receptacle 6 Contact type RI 4 Shell type P : Male,wire solder T C A : Square flange for 10 positions 7 Keying E B : Square flange for 4 positions Blank: Standard L E X : X key position E 8 Other specifications : 2 numerical digits wil be added when S O there is a specification change other HIR than shown in positions qto u 8 1 ●Crimp contacts 0 2 ht g HR34B - SC1 - 2 1 1 ri y p 1 2 3 4 5 o C 8 1 Series name : HR34B Series 4 Conductor size : 20 to 25AWG 1 2 Contact style :SC1 : Female contact 5 Plating 0 1.2 3 Contact type 1 : Gold plated c. 1 : 100pcs/pack e D 2 : 10,000pcs/reel 3

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors ■Straight plugs ●Standard type (Conduit material :Plastic) 49 9 1 A Ø d. ve ◆Wire solder r All dimensions : mm e s e Part No. HRS No. A Applicable cable diameter range(Reference) Solder cup inner diameter R s HR34B-12WPD-10S 134-0026-0 00 Ø7.4 (Ø5.7~6.5) ht Ø1 g HR34B-12WPE-10S 134-0027-2 00 Ø8.5 (Ø6.5~7.3) Ri All HR34B-12WPD-4S 134-0020-3 00 Ø7.4 (Ø5.7~6.5) D. HR34B-12WPD-4S-X 134-0023-1 00 Ø1.7 T HR34B-12WPE-4S 134-0025-7 00 L Ø8.5 (Ø6.5~7.3) O., HR34B-12WPE-4S-X 134-0031-0 00 C ◆Crimp (separate contacts required) C RI Part No. HRS No. A Applicable cable diameter range(Reference) T C HR34B-12WPD-10SC 134-0037-6 00 Ø7.4 (Ø5.7~6.5) E L E HR34B-12WPE-10SC 134-0038-9 00 Ø8.5 (Ø6.5~7.3) E S ●Robust type(Conduit material :Metal) O R HI ◆Wire solder All dimensions : mm 8 1 Part No. HRS No. A Applicable cable diameter range(Reference) Solder cup inner diameter 0 2 ht HR34B-12WPA-10S(71) 134-0004-7 71 Ø7.4 (Ø5.7~6.5) g HR34B-12WPB-10S(71) 134-0007-5 71 Ø8.5 (Ø6.5~7.3) Ø1 ri y p HR34B-12WPK-10S 134-0052-0 00 Ø9.5 (Ø8.0~9.0) o C 8 ◆Crimp (separate contacts required) 1 0 Part No. HRS No. A Applicable cable diameter range(Reference) 2 1. HR34B-12WPA-10SC 134-0017-9 00 Ø7.4 (Ø5.7~6.5) c. De HR34B-12WPB-10SC 134-0028-5 00 Ø8.5 (Ø6.5~7.3) HR34B-12WPK-10SC 134-0053-2 00 Ø9.5 (Ø8.0~9.0) Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. BIllustrations of mated connectors. Straight plug Mating combinations B 10 pos.plug + receptacle wire solder 50.1 4 pos.plug + receptacle wire solder 49.6 B 4

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors ■Right angle plugs ●Standard type (Conduit material : Plastic) 33.5 B Ø19 A d. ve ◆Wire solder r All dimensions : mm e s e Part No. HRS No. A B Applicable cable diameter range(Reference) Solder cup inner diameter R s HR34B-12WLPD-10S 134-0039-1 00 Ø7.4 (Ø5.7~6.5) ht Ø1 g HR34B-12WLPE-10S 134-0040-0 00 Ø8.5 (Ø6.5~7.3) Ri All HR34B-12WLPD-4S 134-0030-7 00 Ø7.4 30.85 (Ø5.7~6.5) D. HR34B-12WLPD-4S-X 134-0034-8 00 Ø1.7 T HR34B-12WLPE-4S 134-0035-0 00 L Ø8.5 (Ø6.5~7.3) O., HR34B-12WLPE-4S-X 134-0036-3 00 C ◆Crimp (separate contacts required) C RI Part No. HRS No. A B Applicable cable diameter range(Reference) T C HR34B-12WLPD-10SC 134-0041-3 00 Ø7.4 (Ø5.7~6.5) E 30.85 L E HR34B-12WLPE-10SC 134-0042-6 00 Ø8.5 (Ø6.5~7.3) E S ●Robust type (Conduit material :Metal) O R HI ◆Wire solder All dimensions : mm 8 1 Part No. HRS No. A B Applicable cable diameter range(Reference) Solder cup inner diameter 0 2 ht HR34B-12WLPA-10S(71) 134-0005-0 71 Ø7.4 30.5 (Ø5.7~6.5) g HR34B-12WLPB-10S(71) 134-0008-8 71 Ø8.5 (Ø6.5~7.3) Ø1 ri y p HR34B-12WLPK-10S 134-0054-5 00 Ø9.5 31.5 (Ø8.0~9.0) o C 8 ◆Crimp (separate contacts required) 1 0 Part No. HRS No. A B Applicable cable diameter range(Reference) 2 1. HR34B-12WLPA-10SC 134-0018-1 00 Ø7.4 (Ø5.7~6.5) c. 30.5 De HR34B-12WLPB-10SC 134-0029-8 00 Ø8.5 (Ø6.5~7.3) HR34B-12WLPK-10SC 134-0055-8 00 Ø9.5 31.5 (Ø8.0~9.0) Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. BIllustrations of mated connectors. Right-angle plug Mating Combinations A 10 pos. plug shell A,B type. Plug + receptacle wire solder 31.0 10 pos. plug shell D,E type. Plug + receptacle wire solder 31.3 （ 10 pos. plug shell K type. Plug + receptacle wire solder 32.0 3 3 .5 4 pos. plug + receptacle wire solder 31.3 ） A 5

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors ■Receptacles ◆Wire solder 4-( R2.8) 4-Ø 3.2 1 3 BA 4 7 8 10 A B d. e All dimensions : mm v r e Part No. HRS No. A B Solder cup inner diameter s e R HR34B-12WRA-10P 134-0016-6 00 17.26 23.4 Ø1 s ht HR34B-12WRB-4P 134-0021-6 00 18.26 25.4 Ø1.4 g Ri HR34B-12WRB-4P-X 134-0024-4 00 All O ring for water proof is not attached. Please find appropriate one from the market. D. BRecommended panel cutouts T O., L ●Receptacle - wire solder All dimensions : mm C 4-B HR34B-12WRB-4P C HR34B-12WRA-10P HR34B-12WRB-4P-X RI T A 17.26±0.05 18.26±0.05 C E A B M3∞0.5 L E C 1 0/-0.1 1.1 0/-0.1 E S D 12.5 +0.1/0 16.3 +0.1/0 O R A E 17 +0.1/0 20.8 +0.1/0 HI 8 Recommended O ring dia. 1 0 C Part No. Thickness Inner diameter 2 ht HR34B-12WRA-10P Ø1.5 Ø11.5 g ri ØD HR34B-12WRB-4P y Ø1.5 Ø15.5 op ØE HR34B-12WRB-4P-X C 8 BReceptacle Contact Arrangement 1 0 2 1. 4 pos.wire solder 10 pos.wire solder c. note.1 View direction : Mating surface e D note.2 mark is ground terminal. 1 1 2 3 2 3 4 5 6 7 8 9 10 BCrimp contacts 15 ◆Female 2 1. Part No. HRS No. Packaging Applicable conductor HR34B-SC1-111 134-0051-7 00 100 pcs/pack 20 to 25AWG HR34B-SC1-211 134-0050-4 00 10,000 pcs/reel (Stranded wire) Note : Use wire with a jacket diameter of 1.7mm max. 6

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors BConnector Mating Combinations 10 pos. Plugs 10 pos. Receptacles Straight, Wire Solder or Crimp HR34B-12WPA-10S(71),10SC HR34B-12WPB-10S(71),10SC HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC HR34B-12WPK-10S,10SC Wire Solder HR34B-12WRA-10P Right angle, Wire Solder or Crimp HR34B-12WLPA-10S(71),10SC HR34B-12WLPB-10S(71),10SC HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC HR34B-12WLPK-10S,10SC d. e v r e s e R s ht g Ri All D. 4 pos. Plugs 4 pos. Receptacles T Straight, Wire Solder (Standard key position) L O., HHRR3344BB--1122WWPPDE--44SS C C RI Standard Wire solder (Standard key position) T key position C HR34B-12WRB-4P E L E E S O Right angle, Wire Solder (Standard key position) R HR34B-12WLPD-4S HI HR34B-12WLPE-4S 8 1 0 2 ht Standard key position g ri y p o C 8 1 0 2 1. Straight, Wire Solder (X key position) c. HR34B-12WPD-4S-X e D HR34B-12WPE-4S-X Wire solder (X key position) HR34B-12WRB-4P-X Right angle, Wire Solder (X key position) HR34B-12WLPD-4S-X X key position HR34B-12WLPE-4S-X X key position 7

HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors BApplicable tools Description Part No. HRS No. Applicable contact Applicable cable Manual contact crimping tool HT304/HR34B-1 150-0107-9 HR34B-SC1-111 20AWG,23AWG,25AWG Press CM-105C 901-0001-0 HR34B-SC1-211 20 to 25AWG Applicator AP105-HR34B-1 901-2051-2 HR34B-SC1-111 Contact extraction tool RP6-SC-TP 150-0039-0 --------------- HR34B-SC1-211 ◆Manual contact crimping tool ◆Press CM-105C (Applicator ◆Contact extraction tool ordered separate) d. e v r e s e R s ht g Ri All BHandling D. 1. Mating 2. Un-mating T L Plug O., Receptacle C B C RI T C E L E E S O A R Rotate counter-clockwise HI 8 1 Mating position alignment marks 0 2 Holding the plug by the outer shell (A) align the arrow on the plug Rotate the sleeve (B) counter-clockwise to a full stop and un-mate ht with the alignment mark on the receptacle and push straight in. the plug from the receptacle. g ri opy BPrecautions Center line of the connector When completely mated and locked the alignment C arrow on the plug must line-up with the center line of 8 the connector (alignment mark on the receptacle). 1 0 2 If the alignment arrow and the center line of the 1. Alignment mark c. connectors are not aligned (1 mm max.) re-insert e the plug until they are aligned. D 1 mm max. 1. When disconnecting or inserting the connector, be sure to do so after turning off the power. 2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the mating mark of the receptacle). 3. Note that the display method of the mating mark will differ depending on the receptacle. 4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter. 5. Please consult Hirose Electric Sales for harness assembly procedure. ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 8 The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H irose Electric: HR34B-12WR-10PD(71) HR34B-SC-211 HR34B-SC-111 AP105-HR34B-1 AP105-HR34B-1(63) AP105-HR34B- 1(66) AP105-HR34B-1(65) AP105-HR34B-1(62) AP105-HR34B-1(61) AP105-HR34B-1(64) AP105-HR34B-1(90)