The Bel Power Solutions produces the industry’s broadest selection of Linear power supplies with output voltages from 5 volts through 250 volts. Rugged technology and proven design merge to create quiet, highly- regulated, dependable DC power. The Linear power supplies are approved to domestic and international regulatory standards, and are CE Marked to the Low Voltage Directive (LVD).  RoHS compatible for all six substances  Worldwide AC Input Capabilities: 100/120/220/230/240 VAC  ±0.05% Output Regulation Used in industrial and medical applications  Low Output Ripple needing low noise/ripple – amplifiers, acoustic,  Mean Time Before Failure (MTBF) in Excess broadcast, ATE and control equipment. of 300,000 Hours  CE marked to Low Voltage Directive  100% Burn-In  2 Year Warranty  Overvoltage Protection (OVP) Standard on 5V Single Outputs, Optional for other outputs under 48V North America +1-866.513.2839 Asia-Pacific +86.755.29885888 Europe, Middle East +353 61 225 977 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies These optional overvoltage protection modules are offered for use with Linear Power Supplies. Each is user adjustable from 6.4 V to 34 V. MODEL CASE SIZE OVP MODULES REQUIRED * B, C, N, D OVP-12G SINGLE OUTPUT E, F OVP-24G AA, B, BB, CC OVP-12G protects both outputs DUAL OUTPUT E OVP-24G protects both outputs AA, BAA, D TRIPLE OUTPUT CBB, 131 OVP-12G protects both 12V through 15V outputs DBB, DCC N, BAA, CBB PEAK CURRENT MODELS OVP-12G protects any output not provided with built-in OVP 131 * Outputs with factory built-in OVP are indicated in the Voltage/Current Rating Chart for each model. OVP is not available for 48V through 250V models. 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies Unsigned output voltages are isolated and can be used as either + or - polarities. Model Input Nominal Max Case Additional 48 Vout 100 to 264 VAC Vout* Amps Type Features HB48-0.5-AG 48 0.5 B 5 Vout HC48-1-AG 48 1 C HA5-1.5/OVP-AG 5 1.5 B A HD48-3-AG 48 3 D C HB5-3/OVP-AG 5 3 B A, C HE48-4-AG 48 4 E C HC5-6/OVP-AG 5 6 C A, C * May require jumpering or potentiometer adjustment. HN5-9/OVP-AG 5 9 N A, C ** HC28-2-AG still available HD5-12/OVP-AG 5 12 D A, C Model numbers highlighted in yellow are not recommended HE5-18/OVP-AG 5 18 E A, C for new designs. F5-25/OVP-AG 5 25 F A, C, D, H G5-35/OVP-AG 5 35 F A, C, D, H CP197-AG 5 50 F A, C, D Additional Features: 12 to 15 Vout A Overvoltage protection, set at 6.2 V ±0.4 V. HA15-0.9-AG 12 0.9 B B Non-adjustable 3-terminal regulator. HB12-1.7-AG 12 1.7 B C C Remote sense provided. D With output inhibit and parallel operation HC12-3.4-AG 12 3.4 C C master/slave capability. HN12-5.1-AG 12 5.1 N C E With output inhibit. HD12-6.8-AG 12 6.8 D C F Adjustable 3-terminal regulator. G Can be made into an isolated output by removing HE12-10.2-AG 12 10.2 E C jumper W1. F15-15-AG 12 16 F C, D, H H Model requires 100 LFM forced-air cooling above HA15-0.9-AG 15* 0.9 B 75% of rated output power at 50°C. HB15-1.5-AG 15 1.5 B C HC15-3-AG 15 3 C C HN15-4.5-AG 15 4.5 N C Dimensions HD15-6-AG 15 6 D C Case Type inches Millimeters HE15-9-AG 15 9 E C AA 6.50 x 4.00 x 2.10 165.10 x 101.60 x 53.34 F15-15-AG 15* 15 F C, D, H B 4.87 x 4.00 x 2.10 123.70 x 101.60 x 53.34 24 to 28 Vout BAA 10.25 x 4.00 x 2.95 260.35 x 101.60 x 74.93 HA24-0.5-AG 24 0.5 B HB24-1.2-AG 24 1.2 B C BB 7.00 x 4.87 x 2.95 177.80 x 123.70 x 74.93 HC24-2.4-AG 24 2.4 C C C 5.62 x 4.87 x 2.95 142.75 x 123.70 x 74.93 HN24-3.6-AG 24 3.6 N C CBB 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 HD24-4.8-AG 24 4.8 D C CC 9.38 x 4.87 x 3.28 238.25 x 123.70 x 83.31 HE24-7.2-AG 24 7.2 E C CP131 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 F24-12-AG 24 12 F C, D, H D 9.00 x 4.87 x 3.28 228.60 x 123.70 x 83.31 HA24-0.5-AG 28* 0.5 B DBB 14.25 x 4.87 x 3.38 361.95 x 123.70 x 85.85 HB28-1-AG 28 1 B C DCC 15.00 x 4.88 x 4.55 381.00 x 123.95 x 115.57 HC28-2-AG1** 28 2 C C E 14.00 x 4.87 x 3.53 355.60 x 123.70 x 89.66 HN28-3-AG 28 3 N C F 16.75 x 4.88 x 5.00 425.50 x 123.95 x 127.00 HD28-4-AG 28 4 D C N 7.00 x 4.87 x 3.28 177.80 x 123.70 x 83.31 HE28-6-AG 28 6 E C F24-12-AG 28* 10 F C, D, H 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies Unsigned output voltages are isolated and can be used as either + or - polarities. Model Input Nominal Max Case Additional 100 to 264 VAC Vout* Amps Type Features 5 V to 15 Vout Additional Features: A Overvoltage protection, set at 6.2 V ±0.4 V. HAA5-1.5/OVP-AG +5, –5 1.5, 1.5 AA A B Non-adjustable 3-terminal regulator. HBB5-3/OVP-AG +5, –5 3, 3 BB A C Remote sense provided. D With output inhibit and parallel operation HCC5-6/OVP-AG +5, –5 6, 6 CC A, C master/slave capability. HAA512-AG 5, 12 to 15 2, 0.5 AA A E With output inhibit. F Adjustable 3-terminal regulator. HBB512-AG 5, 12 to 15 3, 1.25 BB A, C G Can be made into an isolated output by removing HCC512-AG 5, 12 to 15 6, 2.5 CC A, C jumper W1. H Model requires 100 LFM forced-air cooling above HAA15-0.8-AG +12, –5* 1, 0.4 AA C 75% of rated output power at 50°C. HBB15-1.5-AG +12, –5* 1.7, 0.7 BB C HAD12-0.4-AG +12, –12 0.4, 0.4 B B HAA15-0.8-AG +12, –12 1, 1 AA C Case Dimensions HBB15-1.5-AG +12, –12 1.7, 1.7 BB C Type inches Millimeters HCC15-3-AG +12, –12 3.4, 3.4 CC C AA 6.50 x 4.00 x 2.10 165.10 x 101.60 x 53.34 HDD15-5-AG +12, –12* 5, 5 E C B 4.87 x 4.00 x 2.10 123.70 x 101.60 x 53.34 HAA15-0.8-AG +12, –15* 1, 0.8 AA C BAA 10.25 x 4.00 x 2.95 260.35 x 101.60 x 74.93 HBB15-1.5-AG +12, –15* 1.7, 1.5 BB C BB 7.00 x 4.87 x 2.95 177.80 x 123.70 x 74.93 HCC15-3-AG +12, –15* 3.4, 3 CC C C 5.62 x 4.87 x 2.95 142.75 x 123.70 x 74.93 HDD15-5-AG +12, –15* 5, 5 E C CBB 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 HAA15-0.8-AG +15, –5* 0.8, 0.4 AA C CC 9.38 x 4.87 x 3.28 238.25 x 123.70 x 83.31 HBB15-1.5-AG +15, –5* 1.5, 0.7 BB C CP131 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 D 9.00 x 4.87 x 3.28 228.60 x 123.70 x 83.31 HAA15-0.8-AG +15, –12* 0.8, 1 AA C DBB 14.25 x 4.87 x 3.38 361.95 x 123.70 x 85.85 HBB15-1.5-AG +15, –12* 1.5, 1.7 BB C DCC 15.00 x 4.88 x 4.55 381.00 x 123.95 x 115.57 HCC15-3-AG +15, –12* 3, 3.4 CC C E 14.00 x 4.87 x 3.53 355.60 x 123.70 x 89.66 HDD15-5-AG 15, –12* 5, 5 E C F 16.75 x 4.88 x 5.00 425.50 x 123.95 x 127.00 15 V to 24 Vout N 7.00 x 4.87 x 3.28 177.80 x 123.70 x 83.31 HAD15-0.4-AG +15, –15 0.4, 0.4 B B HAA15-0.8-AG +15, –15 0.8, 0.8 AA C HBB15-1.5-AG +15, –15* 1.5, 1.5 BB C HCC15-3-AG +15, –15* 3, 3 CC C HDD15-5-AG +15, –15 5, 5 E C HAA24-0.6-AG +24, –24 0.6, 0.6 AA HBB24-1.2-AG +24, –24 1.2, 1.2 BB HCC24-2.4-AG +24, –24 2.4, 2.4 CC C * May require jumpering or potentiometer adjustment. Model numbers highlighted in yellow are not recommended for new designs. 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies Unsigned output voltages are isolated and can be used as either + or - polarities. Model Input Case Additional Nominal Vout* Max Amps 100 to 264 VAC Type Features 5 V to 24 Vout HTAA-16W-AG +5, +12, –5* 2, 0.4, 0.4 AA A Additional Features: HBAA-40W-AG 5, +12, –5* 3, 1, 0.4 BAA A, C A Overvoltage protection, set at 6.2 V ±0.4 V. B Non-adjustable 3-terminal regulator. HCAA-60W-AG +5, +12, –5* 6, 1, 0.4 D A, C C Remote sense provided. HCBB-75W-AG 5, +12, –5* 6, 1.7, 0.7 CBB C D With output inhibit and parallel operation CP131-AG 5, +12, –5* 8, 1.7, 0.7 CP131 A, C master/slave capability. E With output inhibit. HDBB-105W-AG 5, +12, –5* 12, 1.7, 0.7 DBB A, C F Adjustable 3-terminal regulator. HTAA-16W-AG 5, +12, –12 2, 0.4, 0.4 AA A G Can be made into an isolated output by HBAA-40W-AG 5, +12, –12 3, 1, 1 BAA A, C removing jumper W1. H Model requires 100 LFM forced-air cooling HCAA-60W-AG +5, +12, –12 6, 1, 1 D A, C above 75% of rated output power at 50°C. HCBB-75W-AG 5, +12, –12 6, 1.7, 1.7 CBB C CP131-AG 5, +12, –12 8, 1.7, 1.7 CP131 A, C HDBB-105W-AG 5, +12, –12 12, 1.7, 1.7 DBB C HDCC-150W-AG 5, +12, –12 12, 3.4, 3.4 DCC A, C Case Dimensions HTAA-16W-AG 5, +12, –15* 2, 0.4, 0.4 AA A Type inches Millimeters HBAA-40W-AG 5, +12, –15* 3, 1, 0.8 BAA A, C AA 6.50 x 4.00 x 2.10 165.10 x 101.60 x 53.34 HCAA-60W-AG +5, +12, –15* 6, 1, 1 D A, C B 4.87 x 4.00 x 2.10 123.70 x 101.60 x 53.34 HCBB-75W-AG 5, +12, –15 6, 1.7, 1.5 CBB C BAA 10.25 x 4.00 x 2.95 260.35 x 101.60 x 74.93 CP131-AG 5, +12, –15 8, 1.7, 1.5 CP131 A, C BB 7.00 x 4.87 x 2.95 177.80 x 123.70 x 74.93 HDBB-105W-AG 5, +12, –15* 12, 1.7, 1.5 DBB C C 5.62 x 4.87 x 2.95 142.75 x 123.70 x 74.93 HDCC-150W-AG 5, +12, –15 12, 3.4, 3 DCC A, C CBB 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 HTAA-16W-AG 5, +15, –5* 2, 0.4, 0.4 AA A CC 9.38 x 4.87 x 3.28 238.25 x 123.70 x 83.31 HBAA-40W-AG 5, +15, –5* 3, 0.8, 0.4 BAA A, C CP131 11.00 x 4.87 x 3.28 279.40 x 123.70 x 83.31 HCAA-60W-AG +5, +15, –5* 6, 1, 0.4 D A, C D 9.00 x 4.87 x 3.28 228.60 x 123.70 x 83.31 HCBB-75W-AG 5, +15, –5* 6, 1.5, 0.7 CBB C DBB 14.25 x 4.87 x 3.38 361.95 x 123.70 x 85.85 CP131-AG 5, +15, –5* 8, 1.5, 0.7 CP131 A, DCC 15.00 x 4.88 x 4.55 381.00 x 123.95 x 115.57 HDBB-105W-AG 5, +15, –5* 12, 1.5, 0.7 DBB C E 14.00 x 4.87 x 3.53 355.60 x 123.70 x 89.66 HTAA-16W-AG 5, +15, –12* 2, 0.4, 0.4 AA A F 16.75 x 4.88 x 5.00 425.50 x 123.95 x 127.00 HBAA-40W-AG 5, +15, –12* 3, 0.8, 1 BAA A, C N 7.00 x 4.87 x 3.28 177.80 x 123.70 x 83.31 HCAA-60W-AG +5, +15, –12* 6, 1, 1 D A, C HCBB-75W-AG 5, +15, –12 6, 1.5, 1.7 CBB C CP131-AG 5, +15, –12 8, 1.5, 1.7 CP131 A, C HDBB-105W-AG 5, +15, –12* 12, 1.5, 1.7 DBB C HDCC-150W-AG 5, +15, –12 12, 3, 3.4 DCC A, C HTAA-16W-AG 5, +15, –15* 2, 0.4, 0.4 AA A HBAA-40W-AG 5, +15, –15* 3, 0.8, 0.8 BAA A, C HCAA-60W-AG +5, +15, –15* 6, 1, 1 D A, C HCBB-75W-AG 5, +15, –15 6, 1.5, 1.5 CBB C CP131-AG 5, +15, –15 8, 1.5, 1.5 CP131 A, C HDBB-105W-AG 5, +15, –15* 12, 1.5, 1.5 DBB C HDCC-150W-AG 5, +15, –15 12, 3, 3 DCC A, C * May require jumpering or potentiometer adjustment. Ooo Model numbers highlighted in yellow are not recommended for new designs. 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Jumper selectable, shipped factory configured for 100 VAC Tap 87 100 110 120 VAC operation. All models must be externally AC Input Voltage 1, 2 120 VAC Tap 104 120 132 fused for proper operation. VAC 220 VAC Tap 191 220 242 Fuse ratings are marked on each unit. Consult factory for each unit’s fuse requirements. 240 VAC Tap 209 240 264 Input Frequency AC input. 47 63 Hz Output voltage charge for a 10% line change: F case models. -0.01 +0.01 HAD12, HAD15. -1.0 +1.0 Line Regulation % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Output Adjustment Minimum output adjustment range 3 -5 +5 % 5 volt outputs. 45 Efficiency 12 volt and 15 volt outputs. 55 % 24 volt and higher outputs. 60 F case models. 3.0 mVPK-PK 5 volt, 12 volt, and 15 volt models. 5.0 mVPK-PK Ripple and Noise 4 All three terminal regulator outputs. 0.2 %PK-PK 24 volt through 250 volt models. 3.0 mVPK-PK plus 0.02% of output voltage, max Output change for a 50% load change: F case models. -0.02 +0.02 HAD12, HAD15. -1 +1 Load Regulation % Outputs with adjustable three terminal regulators. -0.5 +0.5 All other models. -0.05 +0.05 Recovery time, to within 1% of initial set point due to a 50% load Transient Response 50 μs change. PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Approved to the latest edition of the following standards; Agency Approvals UL/CSA60950-1 2nd, IEC60950-1 2nd and EN60950-1 2nd. Dielectric Withstand Input to case 2121 VDC Voltage Input to output (tested by manufacturer only) 4242 Electromagnetic FCC CFR title 47 Part 15 Sub-Part B - conducted. EN55022 / CISPR 22 conducted. Compatible with system compliance to Interference EN55022 / CISPR 22 radiated. Level B. Leakage Current Per EN60950 (264 VAC) 23 50 μA 1 Derate output current 10% for 50Hz operation. 2 Input voltage tolerance for 230VAC operation is +15%, -10%. 3 Output voltage adjustments can be made to within ±5% of factory setting of nominal output voltage. Locate the “Vadj” potentiometer on the power supply PCB and use a screwdriver to adjust the output pot. The HAD12 and HAD15 3 terminal regulator outputs are not adjustable. 4 Full load, 20MHz bandwidth. 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies PARAMETER CONDITIONS / DESCRIPTION MIN NOM MAX UNITS Provided on 5 volt output units where indicated. Overvoltage Protection Other outputs may use optional overvoltage protectors OVP-12 and 5.8 6.6 V OVP-24. Total voltage compensation for cable losses with respect to the main Remote Sense 250 mV output. Provided on models where indicated. Overcurrent/Short Circuit Automatic current limit/foldback. Rated as a percentage of output 115 120 140 % Protection power. For parallel operation of up to 6 units. Master/slave pin provided on F Master/Slave Operation case models only. Contact factory for application notes. PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS Derate output power linearly above 50°C by 3% per °C. @ 100% load 0 50 °C Operating Temperature @ 40% load 70 °C Storage Temperature -40 85 °C Temperature Coefficient 0°C to 50°C (after 15 minute warm-up). 0.1 0.3 %/°C 24 hours after warm-up. -0.3 +0.3 % Shock Operating. 20 GPK Vibration Random vibration from 10 Hz to 2 kHz, 3 axis. 6.15 GRMS Relative Humidity Non-Condensing. 5 95 %RH Mechanical Dimensions of Case Types 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Linear Power Supplies NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 866.513.2839 tech.support@psbel.com © 2015 Bel Power Solutions, Inc. BCD.00650_AA

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B el Power Solutions: HN15-4.5-AG HB24-1.2-A HD28-4-AG HE15-9-AG HN5-9/OVP-AG HTAA-16W-AG HCAA-60W-AG HCC24-2.4- AG HC5-6/OVP-AG HD5-12/OVP-AG HDD15-5-AG F24-12-AG HN12-5.1-AG HN28-3-AG HB15-1.5-AG HC15-3- AG HD15-6-AG HD48-3-AG HAA5-1.5/OVP-AG HAD15-0.4-AG HAA15-0.8-AG HAA512-AG HB12-1.7-AG HBB15-1.5-AG HC12-3.4-AG HCC512-AG HD12-6.8-AG HC24-2.4-AG HE24-7.2-AG HAA24-0.6-AG HN24-3.6-AG HE5-18/OVP-AG HTAA-16W-A HD24-4.8-AG HB48-0.5-AG HDCC-150W-AG F15-15-AG HCBB-75W-AG HCC15-3-AG HCC5-6/OVP-AG HC28-2-AG HB24-1.2-AG HE28-6-AG HE12-10.2-AG HBB24-1.2-AG HB5-3/OVP- AG CP131-AG HAD12-0.4-AG