HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Typical Applications Features The HmC910lC4B is ideal for: Very Wide Bandwidth: dC - 24 gHz T • Synchronization of clock and data Continuous adjustable delay range: 70 ps m • Transponder design Single-ended or differential operation S • Serial data Transmission up to 32 gbps adjustable differential output Voltage - Swing: 170 - 760 mVp-p @ 24 gHz g • Broadband Test & measurement delay Control modulation Bandwidth: 10 mHz o • rF aTe applications l Single Supply: +3.3V a 24 lead Ceramic 4x4mm SmT Package: 16mm² n a Functional Diagram General Description - y The HmC910lC4B is a broadband time delay with a 0 to 70 ps continuously adjustable delay range. The l delay control is linearly monotonic with respect to e the control voltage, VdC and the control input has a d modulation bandwidth of 10 mHz. The device provides e a differential output voltage with constant amplitude m for single-ended or differential input voltages above the input sensitivity level, while the output voltage i T swing may be adjusted using the VaC control pin. d The HmC910lC4B features internal temperature compensation and bias circuitry to minimize delay n variations with temperature. The device also features a an enable pin, enB. all rF input and outputs of the B HmC910lC4B are internally terminated with 50 ohms d to Vcc, and may either be aC or dC coupled. output a pins can be connected directly to a 50 ohm to Vcc o terminated system, while dC blocking capacitors must r be used if the terminated system input is 50 ohms to a B dC voltage other than Vcc. Electrical Specifications, T = +25° C, Vcc = 3.3V, Vee = 0V, GND = 0V A Parameter Conditions min. Typ. max. Units Power Supply Voltage ± %9 Tolerance 3 3.3 3.6 V Power Supply Current VaC = 2.6V 400 475 550 ma @ 10 gHz 59 62.5 ps Time delay range @ 20 gHz 63 66.5 ps @ 24 gHz 67 70.5 ps maximum data rate 32 gbps maximum Clock Frequency 24 gHz delay Control modulation Bandwidth 10 mHz delay Control Voltage (VdC) 1.1 2.3 V output amplitude Control Voltage (VaC) 1.7 2.6 2.7 V InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 0 - 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Electrical Specifications, T = +25° C, Vcc = 3.3V, Vee = 0V, GND = 0V (Continued) A Parameter Conditions min. Typ. max. Units input low Voltage Vil Vcc-500 Vcc-200 Vcc-25 mV T m input High Voltage ViH Vcc+25 Vcc+200 Vcc+500 mV Single-ended, peak-to-peak 50 1000 mVp-p S input amplitude differential, peak-to-peak 100 2000 mVp-p - differential, peak-to-peak @ 10 gHz 210 1020 mVp-p g output amplitude differential, peak-to-peak @ 20 gHz 190 880 mVp-p o differential, peak-to-peak @ 24 gHz 170 760 mVp-p l input return loss frequency < 25 gHz 12 dB a output return loss frequency < 25 gHz 14 dB n deterministic Jitter, Jd [1] 6 ps, pp a additive random Jitter, Jr @24 gHz clock input 0.3 ps, rms - rise Time, tr [1] 14 ps y Fall Time, tf [1] 14 ps a l Propagation delay, td @20 gHz clock input 360 ps e Time delay Temperature Sensitivity @ 20 gHz clock input -0.03 ps/°C d [1] V = differential 300 mVp-p, f = 22.5 gbps PrBS 223-1 pattern data data e m Time Delay vs. VDC & Frequency [1] Time Delay vs. VDC & Supply Voltage [1][2] i T 80 80 d n 10 GHz Vcc=3.0V 60 20 GHz 60 Vcc=3.3V a Y (ps) 2242 .G5 HGzbps Y (ps) Vcc=3.6V B LA LA d E 40 E 40 E D E D a TIM TIM o 20 20 r B 0 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) Time Delay vs. VDC & Temperature [1][2] 80 +25C 60 +70C s) -40C p Y ( A L E 40 D E M TI 20 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) [1] VaC = 2.6V [2] input Frequency: 20 gHz InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 0 - 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Programmable Max. Time Delay Range Programmable Max. Time Delay Range vs. Frequency & Temperature [1] vs. Frequency & Supply Voltage [1] 80 80 T m 70 70 s) s) S Y (p Y (p - ELA 60 ELA 60 D D g E E M M o TI 50 ++2750CC TI 50 VVcccc==33..03VV l -40C Vcc=3.6V a n 40 40 0 5 10 15 20 25 0 5 10 15 20 25 a FREQUENCY (GHz) FREQUENCY (GHz) - y a Differential Output Swing vs. l Supply Voltage [1][2][3] DC Current vs. Supply Voltage [1][2][3] e 1000 550 d p) p- +25C me E (mV 900 + -7400CC A) G m450 Ti OLTA 800 ENT ( V R d NTIAL 700 C CUR350 n E D R a FE 600 +25C F +70C B DI -40C d 500 250 3 3.15 3.3 3.45 3.6 3 3.15 3.3 3.45 3.6 a SUPPLY VOLTAGE VCC (V) SUPPLY VOLTAGE VCC (V) o r B Differential Output Swing vs. VAC [2][3] DC Current vs. VAC [2][3] 1000 550 p) mVp- 800 ++2750CC E ( -40C A) G m450 TA 600 T ( L N O E V R NTIAL 400 C CUR350 E D R FE 200 +25C F +70C DI -40C 0 250 1.7 1.9 2.1 2.3 2.5 2.7 1.7 1.9 2.1 2.3 2.5 2.7 AMPLITUDE CONTROL VOLTAGE VAC (V) AMPLITUDE CONTROL VOLTAGE VAC (V) [1] VaC = 2.6V [2] VdC = 1.1V [3] input Frequency: 20 gHz InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 0 - 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Differential Output Swing vs. Frequency [1][2] Peak-to-Peak Jitter vs. VDC [1][3][4] 1100 18 p) p- T V m +25C m OLTAGE ( 900 ER (ps) 16 + -7400CC S NTIAL V 700 P-P JITT 14 g - ERE 500 ++2750CC 12 o F -40C l F DI a 300 10 n 0 5 10 15 20 25 1.1 1.3 1.5 1.7 1.9 2.1 2.3 FREQUENCY (GHz) DELAY CONTROL VOLTAGE VDC (V) a - y a Rise Time vs. VDC [1][3] Fall Time vs. VDC [1][3] l e 20 20 d 18 ++2750CC 18 ++2750CC e -40C -40C m ps) ps) E ( 16 E ( 16 i M M T TI TI RISE 14 FALL 14 d n 12 12 a B 10 10 d 1.1 1.3 1.5 1.7 1.9 2.1 2.3 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) a o r B RMS Jitter vs. VDC & Temperature [1][5] RMS Jitter vs. VDC & Supply Voltage [1][5] 0.5 0.5 0.4 ++2750CC 0.4 VVcccc==33V.3V -40C Vcc=3.6V s) s) p p R ( 0.3 R ( 0.3 E E T T T T JI JI S 0.2 S 0.2 M M R R 0.1 0.1 0 0 1.1 1.3 1.5 1.7 1.9 2.1 2.3 1.1 1.3 1.5 1.7 1.9 2.1 2.3 DELAY CONTROL VOLTAGE VDC (V) DELAY CONTROL VOLTAGE VDC (V) [1] VaC = 2.6V [2] VdC = 1.1V [3] input data rate: 22.5 gbps PrBS 223-1 [4] Source jitter was not deembeded [5] random jitter is calculated with the formula rJadded = √ [ (rJtested)2 – (rJsystem)2 ] at 24 gHz clock signal InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 0 - 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Return Loss vs. Frequency [1][2][3] 0 T m -10 S dB) E (-20 S - N O g SP-30 E o R l -40 Input Output a n -50 0 5 10 15 20 25 a FREQUENCY (GHz) - y a l Output Eye Diagram Continuous Snapshot for 24 GHz Input e d Time Scale: 10 ps/div amplitude Scale: 80 mV/div e m Test Conditions: VCC = 3.3V, VaC = 2.6V, i T VdC = varied from 1.6V to 1.9V (%25 of the whole delay range) d input data: Single ended 300 mVp-p 24 gHz clock signal n measurement result: a Time delay = 34 ps B d a o r B Output Eye Diagram Continuous Snapshot for 10 Gbps Input Time Scale: 20 ps/div amplitude Scale: 100 mV/div Test Conditions: VCC = 3.3V, VaC = 2.6V, VdC = varied from 1.1V to 2.3V (%100 of the whole delay range) input data: differential 300 mVp-p 10 gbps nrZ PrBS 223-1 pattern measurement result: Time delay = 61.5 ps [1] VaC = 2.6V [2] VdC = 1.1V [3] device measured on evaluation board with single-ended time domain gating InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 0 - 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Absolute Maximum Ratings Power Supply Voltage (Vcc) -0.5V to +3.7V input Voltage Vcc -1.2V to Vcc +0.5V T Channel Temperature (Tc) 125 °C m Continuous Pdiss (T = 85 °C) S 2.2 W (derate 54.96 mW/°C above 85 °C) - Thermal resistance 18.20 °C/W g (junction to ground paddle) Storage Temperature -65 to +150 °C o operating Temperature -40 to +70 °C l a n a eleCTroSTaTiC SenSiTiVe deViCe - oBSerVe Handling PreCaUTionS y a l e Outline Drawing d e m i T d n a B d a o r B noTeS: 1. PaCKage Body maTerial: alUmina 2. lead and groUnd Paddle PlaTing: 30 - 80 miCroinCHeS gold oVer 50 miCroinCHeS minimUm niCKle 3. dimenSionS are in inCHeS [millimeTerS] 4. lead SPaCing ToleranCe iS non-CUmUlaTiVe 5. PaCKage WarP SHall noT eXCeed 0.05mm daTUm 6. all groUnd leadS and groUnd Paddle mUST Be Soldered To PCB rF groUnd Package Information Part number Package Body material lead Finish mSl rating Package marking [2] HmC910lC4B alumina, White gold over nickel mSl3 [1] H910 XXXX [1] max peak reflow temperature of 260 °C [2] 4-digit lot number XXXX InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 0 - 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Pin Descriptions Pin number Function description interface Schematic T The pins are not connected internally; however, all data shown m 1, 6, 18 n/C herein was measured with these pins connected to rF/dC ground externally. S 2, 5, 14, 17 Signal grounds should be connected to 0V. - Package gnd g Bottom ground paddle must be connected to dC ground o l a n 3, 4 inP, inn differential Signal inputs a - y a l e d 7, 10, 12, 13 Vee Supply grounds should be connected to 0V. e m i T d n 8 Vdc Time delay control pin. a B d a o enable pin for the time delay. For normal operation; leave the pin r 9 enB open or apply +3.3V. To disable the part apply 0V. When disabled B total current consumption drops to 15ma. 11 Vac output amplitude control pin. 15, 16 Qn, QP differential Signal outputs InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 0 - 7 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Pin Descriptions (Continued) Pin number Function description interface Schematic T m 19 - 24 Vcc Positive supply S - g o l Application Circuit a n a - y a l e d e m i T d n a B d a o r B InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 0 - 8 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Evaluation PCB T m S - g o l a n a - y a l e d e m i T d n a B d a o r B List of Materials for Evaluation PCB 129874 [1] The circuit board used in the application should item description use rF circuit design techniques. Signal lines J1 - J4 K Connector should have 50 ohm impedance while the package J7 10 Pin dC Connector ground leads and exposed paddle should be con- J8 4 Pin dC Connector nected directly to the ground plane similar to that C1, C8, C10, C12, C14 1000 pF Capacitor, 0603 Pkg. shown. a sufficient number of via holes should be C2, C7, C9, C11, C13 0.1 µF Capacitor, 0603 Pkg. used to connect the top and bottom ground planes. C15, C16, C17, C19, C20 4.7 µF Capacitor, Tantalum The evaluation board should be mounted to an U1 HmC910lC4B analog Phase Shifter appropriate heat sink. The evaluation circuit board PCB [2] 126490 evaluation Board shown is available from Hittite upon request. [1] reference this number when ordering complete evaluation PCB [2] Circuit Board material: rogers 4350 or arlon 25 Fr InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 0 - 9 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC910LC4B v03.1211 BROADBAND ANALOG TIME DELAY, DC - 24 GHz Notes: T m S - g o l a n a - y a l e d e m i T d n a B d a o r B InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 0 - 10 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A nalog Devices Inc.: HMC910LC4B 129874-HMC910LC4B HMC910LC4BTR HMC910LC4BTR-R5