HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Typical Applications Features the HMc713LP3e is ideal for: wide Dynamic range: up to 54 dB • cellular Infrastructure High Accuracy: ±1 dB with 54 dB range Up to 2.7 GHz • wiMAX, wiBro & Lte/4G Fast output response time • Power Monitoring & control circuitry supply Voltage: +2.7 to +5.5V • receiver signal strength Indication (rssI) Power-Down Mode • Automatic Gain & Power control excellent stability over temperature • Military, ecM & radar 11 16 Lead 3x3 mm sMt Package: 9mm² Functional Diagram General Description t the HMc713LP3e Logarithmic Detector/controller M is ideal for converting the power of rF signals with s frequencies in the 50 MHz to 8000 MHz range, to a - Dc voltage, proportional to input power, at its output. s the HMc713LP3e employs a successive compression r technology which delivers 54 dB of dynamic range o with high measurement accuracy over a wide input t frequency range. As the input signal is increased, c successive amplifiers move into saturation one by one e creating an accurate approximation of the logarithm t function. the outputs of a series of detectors are e D summed, converted into voltage domain and buffered to drive the oUtP output. r e For detection mode, the oUtP pin is connected to w the Vset input and will provide a nominal logarithmic slope of 17 mV/dB  and an intercept of -68 dBm. the o HMc713LP3e can also be used in the controller mode P where an external voltage is applied to the Vset pin to create an AGc or APc feedback loop. Electrical Specifications, T = +25 °C, Vcc = +3V, EN = +3V [1] A Parameter typ. typ. typ. typ. typ. typ. typ. typ. typ. typ. Units Input Frequency 50 100 500 900 1900 2700 3900 5800 7000 8000 MHz ±3 dB Dynamic range 61 61 61 62 62 61 58 50 44 40 dB ±3 dB Dynamic range center -27 -27 -27 -28 -28 -28 -26 -23 -20 -17 dBm ±1 dB Dynamic range 54 53 53 54 55 54 49 39 33 31 dB oUtP slope 17.2 17.2 17.2 17.1 17 17.2 18.3 21.2 23.8 25.5 mV/dB oUtP Intercept -67.9 -68.1 -68.6 -68.9 -69.5 -69.2 -65.3 -55.9 -48.8 -44.2 dBm Variation of oUtP with temperature -1.3 -1.3 -1.2 -1.2 -1.1 -1.1 -1.2 -2.1 -2.8 -3.5 dB from -40°c to +85°c @ -20 dBm Input [1] Detector mode measurements; oUtP (Pin 13) is connected to Vset (Pin 7) through an rc network. InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Electrical Specifications, (continued) Parameter conditions Min. typ. Max. Units Power Down (EN) Input Voltage range for Normal Mode 0.8 x Vcc Vcc/2 V Voltage range for Powerdown Mode Vcc/2 0.2 x Vcc V Power Supply (Vcc) operating Voltage range 2.7 - 5.5 V supply current in Normal Mode eN Input at Vcc 17 mA supply current in Power Down Mode eN Input at GND 0.4 mA OUTP Output 11 rise time cLPF= 0, No Power to -10 dBm, 10% - 90% 24 ns Fall time cLPF= 0, -10 dBm to No Power, 90% - 10% 36 ns 50mV reduction in output voltage swing output Video Bw (3 dB referred to the input) [1] 16 MHz t Voltage range closed Loop (eval Board setup) 0.2 - 1.2 V M 0.1 to Voltage range open Loop (Vcc -0.1) V s current Drive source / sink 4.2 / 0.48 mA - OUTN Output s current Drive source / sink 4.0 / 0.43 mA r output Voltage range 0.2 - 2.1 V o RF Input t F= 50 MHz to 8 GHz c Input return Loss (s11) 10 dB Z0= 50Ω, see plot e VSET Input t Input Impedance 1 MΩ e Input Voltage range eval Board 0.2 - 1.2 V D Low Frequency Gain Vset to oUtP 64 dB r open Loop corner Frequency 11 kHz e w o P [1] two tone test: Frequency = 900 MHz, tone 1 Power = -20 dBm, tone 2 Power = -28 dBm InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Output Voltage & Error Output Voltage & Error vs. Input Power, Fin = 50 MHz vs. Input Power, Fin = 100 MHz 2.4 6 2.4 6 OUTP Err +25C OUTP Err +25C 2 OUTP Err +85C 4 2 OUTP Err +85C 4 OUTP Err -40C OUTP Err -40C OUTN Err +25C OUTN Err +25C OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUTP OUTP 0.4 OUTN -4 0.4 OUTN -4 11 0 -6 0 -6 -60 -50 -40 -30 -20 -10 0 10 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) t M Output Voltage & Error Output Voltage & Error s vs. Input Power, Fin = 500 MHz vs. Input Power, Fin = 900 MHz - 2.4 6 2.4 6 s OUTP Err +25C OUTP Err +25C r 2 OUTP Err +85C 4 2 OUTP Err +85C 4 OUTP Err -40C OUTP Err -40C o OUTN Err +25C OUTN Err +25C t V)1.6 OOUUTTNN EErrrr +-4805CC 2 E V)1.6 OOUUTTNN EErrrr +-4805CC 2 E tec OUT[P,N] (01..82 -02 RROR (dB) OUT[P,N] (01..82 -02 RROR (dB) e OUTP OUTP 0.4 OUTN -4 0.4 OUTN -4 D r 0 -6 0 -6 -60 -50 -40 -30 -20 -10 0 10 -60 -50 -40 -30 -20 -10 0 10 e INPUT POWER (dBm) INPUT POWER (dBm) w o Output Voltage & Error Output Voltage & Error P vs. Input Power, Fin = 1900 MHz vs. Input Power, Fin = 2700 MHz 2.4 6 2.4 6 OUTP Err +25C OUTP Err +25C 2 OUTP Err +85C 4 2 OUTP Err +85C 4 OUTP Err -40C OUTP Err -40C OUTN Err +25C OUTN Err +25C OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUTP OUTP 0.4 OUTN -4 0.4 OUTN -4 0 -6 0 -6 -60 -50 -40 -30 -20 -10 0 10 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Output Voltage & Error Output Voltage & Error vs. Input Power, Fin = 3900 MHz vs. Input Power, Fin = 5800 MHz 2.4 6 2.4 6 2 OOUUTTPP EErrrr ++2855CC 4 2 OOUUTTPP EErrrr ++2855CC 4 OUTP Err -40C OUTP Err -40C OUTN Err +25C OUTN Err +25C OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUT[P,N] (V)011...826 OOUUTTNN EErrrr +-4805CC -022 ERROR (dB) OUTP OUTP 0.4 OUTN -4 0.4 -4 11 OUTN 0 -6 0 -6 -60 -50 -40 -30 -20 -10 0 10 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) t M Output Voltage & Error Output Voltage & Error s vs. Input Power, Fin = 7000 MHz vs. Input Power, Fin = 8000 MHz - 2.4 6 2.4 6 s OUTP Err +25C OUTP Err +25C 2 OUTP Err +85C 4 2 OUTP Err +85C 4 r OUTP Err -40C OUTP Err -40C OUTN Err +25C OUTN Err +25C o P,N] (V)11..26 OOUUTTNN EErrrr +-4805CC 02 ERRO P,N] (V)11..26 OOUUTTNN EErrrr +-4805CC 02 ERRO ct OUT[0.8 -2 R (dB) OUT[0.8 -2 R (dB) te OUTP OUTP e 0.4 -4 0.4 -4 OUTN OUTN D 0 -6 0 -6 r -50 -40 -30 -20 -10 0 10 -40 -30 -20 -10 0 10 e INPUT POWER (dBm) INPUT POWER (dBm) w o P Input Return Loss 0 B) S (d-10 S O L N R U ET-20 R -30 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz OUTP Slope vs. Frequency OUTP Slope vs. Supply Voltage 27 27 25 25 0.05GHz 0.1GHz +25C 0.5GHz +85C 0.9GHz V/dB) 23 -40C V/dB) 23 125...978GGGHHHzzz m m 3.9GHz PE ( 21 PE ( 21 78GGHHzz O O SL 19 SL 19 17 17 11 15 15 0 1 2 3 4 5 6 7 8 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 FREQUENCY (GHz) VOLTAGE SUPPLY (V) t M s OUTP Intercept vs. Frequency OUTP Intercept vs. Supply Voltage - -40 -40 s r 0.05GHz -50 0.1GHz o m) m)-50 00..59GGHHzz ct EPT (dB-60 EPT (dB-60 12357....G9798HGGGGzHHHHzzzz e ERC-70 ERC 8GHz t T T N N e I-80 ++2855CC I-70 D -40C r -90 -80 0 1 2 3 4 5 6 7 8 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 e FREQUENCY (GHz) VOLTAGE SUPPLY (V) w o P OUTP vs. Frequency & Input Power OUTP Voltage & Error vs. Frequency 1.4 1.8 00..015GGHHzz 23..79GGHHzz 6 1.2 0dBm 00..59GGHHzz 57.G8HGzHz -10dBm 1.5 1.9GHz 8GHz 4 1 ERROR P (V) 0.8 --2300ddBBmm V)1.2 2 ER OUT 0.6 -40dBm OUTP (0.9 0 ROR (d 0.4 -50dBm 0.6 -2 B) OUTP 0.2 -60dBm 0.3 -4 0 0 -6 0 1 2 3 4 5 6 7 8 FREQUENCY (GHz) -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Output Response [1] Fall Time C1 = Open Output Response Fall Time [1] C1 = 10nF 1.5 1.5 1.2 10 dBm 1.2 10 dBm 0 dBm 0 dBm -10 dBm -10 dBm -20 dBm -20 dBm V) 0.9 -30 dBm V) 0.9 -30 dBm P ( P ( T T U U O 0.6 O 0.6 0.3 0.3 11 0 0 0 50 100 150 200 250 300 350 400 450 500 0 25 50 75 100 125 150 175 200 TIME (ns) TIME (us) t M s Output Response Rise Time [1] C1 = Open Output Response Rise Time [1] C1 = 10nF - 1.5 1.5 s 10 dBm 1.2 10 dBm 1.2 - 1 00 ddBBmm r 0 dBm -20 dBm o -10 dBm -30 dBm V) 0.9 --2300 ddBBmm V) 0.9 t P ( P ( c T T OU 0.6 OU 0.6 e t e 0.3 0.3 D 0 0 r 0 50 100 150 200 250 300 350 400 450 500 0 10 20 30 40 50 60 70 80 90 100 TIME (ns) TIME (us) e w o P [1] 900 MHz, switched cw-tone InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Absolute Maximum Ratings Vcc 0 to +5.6V eLectrostAtIc seNsItIVe DeVIce eN Input Voltage 0 to +5.6V oBserVe HANDLING PrecAUtIoNs Vset Input Voltage 0 to +5.6V oUtP output current 5 mA oUtN output current 5 mA rF Input Power 12 dBm Junction temperature 125 °c continuous Pdiss (t = 85°c) 0.22 watts 11 (Derate 5.43 mw/°c above 85°c) thermal resistance (r ) th 184 °c/w (junction to lead) storage temperature -65 to +150 °c t operating temperature -40 to +85 °c M esD sensitivity (HBM) class 1c s - s Outline Drawing r o t c e t e D r e w o P Notes: 1. LeADFrAMe MAterIAL: coPPer ALLoY 2. DIMeNsIoNs Are IN INcHes [MILLIMeters]. 3. LeAD sPAcING toLerANce Is NoN-cUMULAtIVe 4. PAD BUrr LeNGtH sHALL Be 0.15mm MAXIMUM. PAD BUrr HeIGHt sHALL Be 0.05mm MAXIMUM. 5. PAcKAGe wArP sHALL Not eXceeD 0.05mm. 6. ALL GroUND LeADs AND GroUND PADDLe MUst Be soLDereD to PcB rF GroUND. 7. reFer to HMc APPLIcAtIoN Note For sUGGesteD PcB LAND PAtterN. Package Information Part Number Package Body Material Lead Finish MsL rating Package Marking [1] HMc713LP3e roHs-compliant Low stress Injection Molded Plastic 100% matte sn MsL1 [2] 713 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °c InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 7 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Pin Descriptions Pin Number Function Description Interface schematic 1, 4 N/c these pins are not connected internally. these pins and package bottom must be connected to 2, 5, 9 - 12 GND rF/Dc ground. 11 3 rFIN rF input pin. t M s - s r enable pin. o Apply VeN >0.8 x Vcc for normal operation. 6 eN Apply VeN <0.2xVcc to disable the HMc713LP3e and t reduce supply current to 0.4mA. c e t e D r e w set point input for controller mode. 7 Vset connect to oUtP with the resistor network shown in o evaluation board drawing for detector mode. P connection for ground referenced external lowpass 8 cLPF filter capacitor. InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 8 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Pin Descriptions (Continued) Pin Number Function Description Interface schematic Logarithmic output that converts the input power to a 13 oUtP Dc level in controller mode. output voltage increases with increasing amplitude 11 t M Inverted logarithmic output. 14 oUtN oUtN= 2.55 - 2 x oUtP s - s r o t c Bias supply. connect supply voltage e 15, 16 Vcc to these pins with appropriate filtering. t e D r e w o P InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 9 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Application & Evaluation PCB Schematic 11 t M s - s r o t c Notes e Note 1: the HMc713LP3e evaluation board is pre-assembled for single-ended input, and detector/rssI mode. t Note 2: For detector mode, connect high impedance volt meter to the oUtP / oUtN port. e D Note 3: For controller mode, remove r9 & c3 and install 1k Ω resistor (r7, not included) and 100pF capacitor (c2, not included), then make appropriate connection to oUtP and Vset. In controller mode, the oUtP / oUtN output can be used to drive r a variable gain amplifier, or a variable attenuator, either directly or through a buffer or microcontroller. Vset should be connected to an external supply, typically between +0.2 and +1.2V. e w Note 4: An external capacitance c1 can be connected to cLPF port for additional filtering of oUtP and oUtN outputs.. o P InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 10 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Evaluation PCB 11 t M s - s r o t c e t e D r e w List of Materials for Evaluation PCB 125825 [1] the circuit board used in the final application o Item Description should use rF circuit design techniques. signal P J1 - J4 Pc Mount sMA connector lines should have 50 ohm impedance while the J5 - J7 Dc Pin package ground leads and exposed paddle should c3 1 pF capacitor, 0402 Pkg. be connected directly to the ground plane similar c6 0.1 µF capacitor, 0402 Pkg. to that shown. A sufficient number of via holes c7, c8 100 pF capacitor, 0402 Pkg. should be used to connect the top and bottom r2 14Ω resistor, 0402 Pkg. ground planes. the evaluation circuit board shown r3 68Ω resistor, 0402 Pkg. is available from Hittite upon request. r4 22Ω resistor, 0402 Pkg. r6, r8 10kΩ resistor, 0402 Pkg. r9 1kΩ resistor, 0402 Pkg. r10, r11 0Ω resistor, 0402 Pkg. U1 HMc713LP3e Logarithmic Amplifier PcB [2] 125823 evaluation PcB [1] reference this number when ordering complete evaluation PcB [2] circuit Board Material: Arlon 25Fr or rogers 4350 InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 11 - 11 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicPaayht ioroens nuolret of:rto hm9er 7wits8is ue-s 2eu.n5 dS0epre- ca3infi3yc ap4tiao3tne sn ts ou rb Fjpeaactte xtno:t cr9higa7hnt8gs e-o 2wf Ai5thn0oaulo-t g3n oD3tiec7vei3.c eN s o. OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D

HMC713LP3E v01.1009 54 dB, LOGARITHMIC DETECTOR / CONTROLLER, 50 - 8000 MHz Notes: 11 t M s - s r o t c e t e D r e w o P InfoFrmoarti opn rfiucrneis,h edd eblyi vAenarlyog a Dnedvic etos isp blaelcieeve do trod beer asc:c uHraittet iatned Mreliiacbrleo. wHoawvevee r,C noo rpFoorra tpiroicne,, 2d0el iAvelrpyh, aan Rd otoa dpl,a cCeh oerldmerssf:o Arnda,l oMg AD e0v1ic8e2s4, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mPayh roesnulet f:ro m9 7its8 u-s2e.5 S0pe-c3ifi3ca4tio3n s s u bFjeact xto: c9ha7n8ge- 2wi5th0ou-t 3no3tic7e3. N o OPrhdoneer: O78n1--3li2n9e- 4a7t0 0w (cid:127)w Owrd.ehri totnitlein.ec aot mwww.analog.com 11 - 12 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks aArep thpe lpircopaetrityo onf thSeiur rpesppeoctrivte: oPwhneorsn.e: 978-250-33A4p3p l icoart i oanp Spusp@pohrti:t Ptihteo.nceo: 1m-800-ANALOG-D