图片仅供参考

详细数据请看参考数据手册

Datasheet下载
  • 型号: HMC605LP3E
  • 制造商: Hittite
  • 库位|库存: xxxx|xxxx
  • 要求:
数量阶梯 香港交货 国内含税
+xxxx $xxxx ¥xxxx

查看当月历史价格

查看今年历史价格

产品参数

参数 数值
产品目录 射频/IF 和 RFID
描述 IC MMIC AMP LNA BYPASS 16-QFN
产品分类 RF 放大器
品牌 Hittite Microwave Corporation
数据手册 点击此处下载产品Datasheet
产品图片
P1dB 17dBm
产品型号 HMC605LP3E
RF类型 WiMAX / WiBro
rohs 无铅 / 符合限制有害物质指令(RoHS)规范要求
产品系列 -
供应商器件封装 16-QFN(3x3)
其它名称 1127-1480
包装 散装
噪声系数 1.1dB
增益 20dB
封装/外壳 16-VQFN 裸露焊盘
标准包装 100
测试频率 -
电压-电源 3V,5V
电流-电源 74mA
频率 2.3GHz ~ 2.7GHz

Datasheet

PDF Datasheet 数据手册内容提取

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz Typical applications Features The HMC605LP3 / HMC605LP3E is ideal for: Noise Figure: 1.1 dB T • Wireless Infrastructure Output IP3: +31 dBm M • Customer Premise Equipment Gain: 20 dB S E • Fixed Wireless Low Loss & Failsafe Bypass Path - S • WiMAX & WiBro Single Supply: +3V or +5V R • Tower Mounted Amplifiers 50 Ohm Matched Output/Input T E I F Functional Diagram General Description I L The HMC605LEP3 / HMC605LP3E are versatile, high P dynamic range GaAs MMIC Low Noise Amplifi ers that M integrate a low loss LNA bypass path on the IC. The A ampLlifi er is ideal for WiBro & WiMAX receivers E operating between 2.3 and 2.7 GHz and provides 1.1 S dB noise figure, 20 dB of gain and +31 dBm output IP3 I O O from a single supply of +5V @ 74 mA. Input and output N return losses are 14 and 15 dB respectively with no external matching components required. A single W control line (Vctl) is used to switch between LNA mode O S and a low 2 dB loss bypass mode and reduces the L current consumption to 10 μA. The HMC605LP3 is failsafe and will default to the bypass mode with no DC power applied. B Electrical specifications, T = +25° C, Vdd = 5V a LNA Mode Bypass Mode ParamOeter Units Min. Typ. Max. Min. Typ. Max. Frequency Range 2.3 - 2.7 2.3 - 2.7 GHz Gain 17.5 20.5 -3.0 -2.0 dB Gain Variation Over Temperature 0.012 0.002 dB / °C Noise Figure 1.1 1.3 dB Input Return Loss 14 13 dB Output Return Loss 15 13 dB Reverse Isolation 33 dB Power for 1dB Compression (P1dB)[1] 17 14 dBm Third Order Intercept (IP3) [2] 31 23 dBm Supply Current (Idd) 74 90 0.01 mA Switching LNA Mode to Bypass Mode - 6.0 ns Speed Bypass Mode to LNA Mode 60 - ns [1] P1dB and IIP3 is referenced to RFOUT for LNA mode and to RFIN for Bypass Mode. [2] For LNA Mode: Input tone power is -20 dBm/tone at 1 MHz tone spacing. For Bypass Mode: Input tone power is 0dBm/tone at 1MHz tone spacing For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 1 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz LNa Broadband Gain & Return Loss LNa Gain, Noise Figure & Power vs. supply Voltage @ 2.5 GHz 30 25 2.5 20 T 20 2 m) M 10 B N RESPONSE (dB) --21000 SSS212112 GAIN (dB), P1dB (d 11505 PG1adinB T NoiseE Figure 011..55 OISE FIGURE (dB) ERS - S -30 I 0 0 F -40 3 3.5 4 4.5 5 I 1 2 3 4 5 6 E Vdd (Vdc) PL FREQUENCY (GHz) M A L LNa Gain vs. Temperature LNa Noise Figure vs. Temperature E S 24 1.6 I O O 22 N B) 20 RE (dB) 1.2 W GAIN (d 18 S E FIGU 0.8 LO S OI +25C N 0.4 +-4205CC 16 +85C +85C -40C B 14 0 2.3 2.4 2.5 2.6 2.7 2.3 2.4 2.5 2.6 2.7 FREQUENCY (GHz) FREQUENCY (GHz) O LNa Gain vs. Vdd LNa Noise Figure vs. Vdd 24 1.5 22 1.3 m) B d B) 20 E ( 1.1 d R GAIN ( 18 E FIGU 0.9 35VV S OI N 16 +3V 0.7 +5V 14 0.5 2.3 2.4 2.5 2.6 2.7 2.3 2.4 2.5 2.6 2.7 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 2 Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz LNa Input Return Loss vs. Temperature LNa Output Return Loss vs. Temperature 0 0 T -5 -5 M +25C S S (dB) -10 S (dB) -10 E +-4805CC S S O O - L -15 L -15 N N S R R U U R ET -20 ET -20 R R T E +25C -25 +85C -25 I -40C F I -30 -30 L 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 2.3 2.35 E2.4 2.45 2.5 2.55 2.6 2.65 2.7 P FREQUENCY (GHz) FREQUENCY (GHz) M A LNa Output IP3 vs. Temperature LNaL Output IP3 vs. Vdd E S 35 40 I O 34 O 35 N 33 W Bm) 32 30 LO UTPUT IP3 (d 233901 +25C S IP3 (dBm) 2205 +3V O 28 -40C +5V +85C 27 15 26 B 25 10 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 FREQUENCY (GHz) FREQUENCY (GHz) O LNa Psat vs. Temperature LNa Output P1dB vs. Temperature 24 24 +25C +25C 22 +85C 22 +85C -40C -40C m) 20 m) 20 B B T (d B (d A d S 18 1 18 P P 16 16 14 14 2.3 2.4 2.5 2.6 2.7 2.3 2.4 2.5 2.6 2.7 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 3 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz LNa Output P1dB vs. Vdd LNa Reverse Isolation vs. Temperature 40 0 T 35 M -10 P3 (dBm) 2350 LATION (dB) -20 ++-428055CCC E S - S I O 20 ++35VV IS -30 T R E 15 I F 10 -40 I 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 2.3 E2.4 2.5 2.6 2.7 L FREQUENCY (GHz) FREQUENCY (GHz) P M A Bypass Mode BypLass Mode E Broadband Gain & Return Loss Insertion Loss vs. Temperature S 0 0 I O O -1 N -10 B) E (dB) OSS (d -2 W RESPONS --3200 SSS212112 S INSERTION L --43 ++-428055CCC LO B -40 -5 1 2 3 4 5 6 2.3 2.4 2.5 2.6 2.7 FREQUENCY (GHz) FREQUENCY (GHz) O Bypass Mode Bypass Mode Input Return Loss vs. Temperature [1] Output Return Loss vs. Temperature [1] 0 0 -5 -5 B) B) S (d -10 S (d -10 S S O O L -15 L -15 N N R R ETU -20 ++2855CC ETU -20 ++2855CC R -40C R -40C -25 -25 -30 -30 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz Bypass Mode Bypass Mode Input IP3 vs. Frequency Input P1dB vs. Frequency 30 20 T M Bm) 18 S 25 NT (d E m) OI 16 - dB 20 N P RS IP3 ( ESSIO 14 R T E 15 MP O 12 I C F I L 10 10 E P 2.3 2.35 2.4 2.45 2.5 2.55 2.6 2.65 2.7 2.3 2.4 2.5 2.6 2.7 M FREQUENCY (GHz) FREQUENCY (GHz) A L E S I O O N W O S L B O For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 5 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz absolute Maximum Ratings Typical supply Current vs. Vdd Drain Bias Voltage (Vdd) +8 Vdc Vdd (Vdc) Idd (mA) RF Input Power (RFIN) LNA Mode +22 dBm +3.0 28 (Vdd = +5.0 Vdc) Bypass Mode +30 dBm T +5.0 74 M Channel Temperature 150 °C Continuous Pdiss (T = 85 °C) E S 1.03 mW (derate 15.85 mW/°C above 85 °C) - Thermal Resistance Truth Table 63.08 °C/W S (channel to ground paddle) R LNA Mode Vctl= Vdd + 0.3V Storage Temperature -65 to +150° C T E Bypass Mode Vctl= 0 + 0.3V Operating Temperature -40 to +100° C I F I E L ELECTROSTATIC SENSITIVE DEVICE P OBSERVE HANDLING PRECAUTIONS M A L Outline Drawing E S I O O N W O S L B O NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC605LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] 605 XXXX HMC605LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 605 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz Pin Descriptions Pin Number Function Description Interface Schematic T 1, 2, 5, No connection necessary. N/C M 6, 8, 12 These pins may be connected to RF/DC ground. This pin is AC coupled S 3 RFIN and matched to 50 Ohms. E - 4, 7, 9, S GND These pins must be connected to RF/DC ground. 11, 15 R T E 10 RFOUT This pin is AC coupled and matched to 50 Ohms. I F I L E P Power supply voltage. Bypass capacitors 14 Vdd M are required. See application circuit. A L E S I O O N 16 Vctl LNA/Bypass Mode Control Voltage. See truth table. W O S L application Circuit B Components Value C1, C2 1O00pF C3 10KpF For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 7 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC605LP3 / 605LP3E v04.1013 Gaas PHEMT MMIC LOW NOIsE aMPLIFIER w/ BYPass MODE, 2.3 - 2.7 GHz Evaluation PCB T M E S - S R T E I F I E L P M A L E S I O O N W O S L B O List of Materials for Evaluation PCB 117160 [1] The circuit board used in the application should use Item Description RF circuit design techniques. Signal lines should J1 - J2 PCB Mount SMA RF Connector have 50 Ohm impedance while the package ground J3 - J6 DC Pin leads and exposed paddle should be connected C1, C2 100 pF Capacitor, 0402 Pkg. directly to the ground plane similar to that shown. C3 10 KpF Capacitor, 0402 Pkg. A sufficient number of via holes should be used to U1 HMC605LP3 / 605LP3E Amplifier connect the top and bottom ground planes. The PCB [2] 117158 Evaluation Board evaluation circuit board shown is available from [1] Reference this number when ordering complete evaluation PCB Hittite upon request. [2] Circuit Board Material: Rogers 4350 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 Application Support: Phone: 978-250-3343 or apps@hittite.com