HMC602LP4 602LP4E / v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Typical Applications Features The HMC602LP4(E) is ideal for IF and RF applica- Wide Dynamic Range: up to 70 dB tions in: High Accuracy: ±1 dB with 60 dB Range Up To 6 GHz • Cellular/PCS/3G Fast: 10ns Output Response Time • WiMAX, WiBro, WLAN, Fixed Wireless & Radar Supply Voltage: +5V • Power Monitoring & Control Circuitry Power-Down Mode • Receiver Signal Strength Indication (RSSI) Excellent Stability over Temperature • Automatic Gain & Power Control Buffered Temperature Sensor Output Compact 4x4mm Leadless SMT Package 12 Functional Diagram General Description The HMC602LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a proportional DC T voltage at its output. The HMC602LP4(E) employs M a successive compression topology which delivers S extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power - is increased, successive amplifi ers move into saturation S one by one creating an accurate approximation of the R logarithm function. The output of a series of square law O detectors is summed, converted into voltage domain T and buffered to drive the LOGOUT output. For detection C mode, the LOGOUT pin is shorted to the VSET input, E and will provide a nominal logarithmic slope of -25mV/ T dB and an intercept of 18 dBm (23 dBm for ƒ > 5.8 GHz). E The HMC602LP4(E) can also be used in the controller D mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop. R E Electrical Specifi cations, T = +25C, EN= 5V, Vcc1, Vcc2, Vcc3= +5V [1] W A Parameter Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Typ. Units O Input Frequency 50 100 900 1900 2200 3600 5800 7000 8000 MHz P ±3 dB Dynamic Range 69 70 71 71 71 68 66 61 56 dB ±3 dB Dynamic Range Center -24.5 -25 -25.5 -25.5 -25.5 -24 -23 -20.5 -19 dBm ±1 dB Dynamic Range 61 61 62 62 63 62 63 56 49 dB Output Intercept 18.2 18 18.7 19.8 20.2 23.1 24.4 23 21.6 dBm Output Slope -25.6 -25.5 -25.3 -25 -25 -24.6 -25.4 -27.5 -30 mV/dB Temperature Sensitivity @ -10 dBm Input [2] 16 16 14 14 15 16 15 14 22 mdB/°C [1] Detector mode measurements; LOGOUT (Pin 15) is shorted to VSET (Pin 16). [2] Measured from TA = -40C to TA = +85C [3] C9 removed from production board Parameter Conditions Min. Typ. Max. Units LOGOUT Interface Output Voltage Range 0 Vcc -1.0 V Output Fall Time -10 dBm Input Pulsed; Measured from 10% to 90% [3] 9.5 ns Output Rise Time -10 dBm Input Pulsed; Measured from 10% to 70% [3] 10 ns VSET Interface Input Impedance 30 kΩ Input Voltage Range 0.25 to 2.0 V Low Frequency Gain VSET to LOGOUT 56 dB Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 12 - 18 rliicgehntss eo fi sth girrda nptaerdti ebsy t h2ima0tp ml icAaayt ilorpens huolrat ofr toRhmer owitsais ueds eu,.n dSCepreh caeinfiycl amptiaotsnesnf tos ourrb djpea,c tte Mtnot cArhiga hn0tgs1 eo 8wf Ai2thn4oaulo t Pgn oDhtiecovei.cn eNeso. : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Electrical Specifi cations, (continued) Parameter Conditions Min. Typ. Max. Units Open Loop Corner Frequency 700 kHz Power Down (EN) Interface Voltage Range for Normal Mode 0.8 x Vcc [4] Vcc [4] V Voltage Range for Powerdown Mode 0 0.2 x Vcc [4] V Threshold Voltage Vcc [4]/2 V Power Supply (Vcc1, Vcc2, Vcc3) Operating Voltage Range 4.5 5.5 V Supply Current in Normal Mode 113 mA Supply Current in Power Down Mode 1 mA [4] Vcc= Vcc1= Vcc2= Vcc3= +5V 12 Test Conditions Parameter Condition Vcc1, Vcc2, Vcc3 +5V T Input Zo 50Ω M T +25C A Fin 900 MHz S LOGOUT Voltage & Error LOGOUT Voltage & Error - S vs. Input Power, Fin = 50 MHz vs. Input Power, Fin = 100 MHz R 2.6 4 2.6 4 O EERRRR ++2855CC EERRRR ++2855CC T 2 ERR -40C 2 2 ERR -40C 2 C E V) E V) E LOGOUT (1.4 0 RROR (dB LOGOUT (1.4 0 RROR (dB DET ) ) 0.8 ILdOeGalOUT +25C -2 0.8 ILdOeGalOUT +25C -2 R LOGOUT +85C LOGOUT +85C LOGOUT -40C LOGOUT -40C E 0.2 -4 0.2 -4 W -70 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 0 10 O INPUT POWER (dBm) INPUT POWER (dBm) P LOGOUT Voltage & Error LOGOUT Voltage & Error vs. Input Power, Fin = 900 MHz vs. Input Power, Fin = 1900 MHz 2.6 4 2.6 4 ERR +25C ERR +25C ERR +85C ERR +85C 2 ERR -40C 2 2 ERR -40C 2 V) E V) E OGOUT (1.4 0 RROR (d OGOUT (1.4 0 RROR (d L B L B ) ) 0.8 Ideal -2 0.8 Ideal -2 LOGOUT +25C LOGOUT +25C LOGOUT +85C LOGOUT +85C LOGOUT -40C LOGOUT -40C 0.2 -4 0.2 -4 -70 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, T = +25C A Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties th2a0t m Aay lrpeshulat fr oRm oitsa udse,. SCpehceificlamtiosnsf osurbdje,c t Mto cAha n0g1e 8wi2th4ou t Pnohticoe.n Neo : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com 12 - 19 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz LOGOUT Voltage & Error LOGOUT Voltage & Error vs. Input Power, Fin = 2200 MHz vs. Input Power, Fin = 3600 MHz 2.6 4 2.6 4 ERR +25C ERR +25C ERR +85C ERR +85C 2 ERR -40C 2 2 ERR -40C 2 V) E V) E OGOUT (1.4 0 RROR (d OGOUT (1.4 0 RROR (d L B L B ) ) 0.8 Ideal -2 0.8 Ideal -2 LOGOUT +25C LOGOUT +25C 12 LOGOUT +85C LOGOUT +85C LOGOUT -40C LOGOUT -40C 0.2 -4 0.2 -4 -70 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) T M LOGOUT Voltage & Error LOGOUT Voltage & Error S vs. Input Power, Fin = 5800 MHz vs. Input Power, Fin = 7000 MHz - 2.6 4 2.6 6 S Ideal ERR +25C R LOGOUT +25C ERR +85C LOGOUT +85C ERR -40C O 2 LOGOUT -40C 2 2 3 T V) E V) E EC OGOUT (1.4 0 RROR (d OGOUT (1.4 0 RROR (d T L B) L B) DE 0.8 EEERRRRRR ++-428055CCC -2 0.8 ILLLdOOOeGGGalOOOUUUTTT ++ -284550CCC -3 R 0.2 -4 0.2 -6 -70 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 0 10 E INPUT POWER (dBm) INPUT POWER (dBm) W O LOGOUT Voltage & Error P vs. Input Power, Fin = 8000 MHz LOGOUT vs. Frequency Over Input Power 2.4 10 2.4 ERR +25C -70dBm ERR +85C 1.8 ERR -40C 5 1.8 -60dBm -50dBm -40dBm LOGOUT (V)1.2 0 ERROR (dB OUT (V) 1.2 -1--23000dddBBBmmm ) 0.6 Ideal -5 0.6 0dBm LOGOUT +25C LOGOUT +85C 10dBm LOGOUT -40C 0 -10 0 0 1 2 3 4 5 6 7 8 -70 -60 -50 -40 -30 -20 -10 0 10 FREQUENCY (GHz) INPUT POWER (dBm) Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 12 - 20 rliicgehntss eo fi sth girrda nptaerdti ebsy t h2ima0tp ml icAaayt ilorpens huolrat ofr toRhmer owitsais ueds eu,.n dSCepreh caeinfiycl amptiaotsnesnf tos ourrb djpea,c tte Mtnot cArhiga hn0tgs1 eo 8wf Ai2thn4oaulo t Pgn oDhtiecovei.cn eNeso. : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz LOGOUT Slope vs. Frequency LOGOUT Slope vs. Supply Voltage -20 -20 0.1GHz -22 -22 1.9GHz 3.6GHz 5.8GHz mV/dB) -24 mV/dB)-24 8GHz OPE ( -26 OPE (-26 SL -28 SL-28 +25C +85C -30 -40C -30 12 -32 -32 0 1 2 3 4 5 6 7 8 4.5 5 5.5 FREQUENCY (GHz) Vcc1, Vcc2, Vcc3 (Volts) T M S LOGOUT Intercept vs. Frequency LOGOUT Intercept vs. Supply Voltage - 30 26 S 27 24 R INTERCEPT (dBm) 122814 ++2855CC INTERCEPT (dBm) 11226802 01..19GGHHzz ETECTO 15 -40C 14 35..68GGHHzz D 8GHz 120 1 2 3 4 5 6 7 8 12 R 4.5 5 5.5 FREQUENCY (GHz) E Vcc1, Vcc2, Vcc3 (Volts) W O LOGOUT Error vs. Input Power, LOGOUT Voltage P Normalized [2], Fin= 1900 MHz vs. Input Power & Frequency 2 2.4 B) d 2 C ( 1 5 R TO 2 T (V) 1.6 RO 0 OU 1.2 50 MHz ER OG 100 MHz VE L 0.8 1990000 M MHHzz ELATI -1 +-4805CC 0.4 32620000M MHHzz R 5800MHz 8000MHz -2 0 -70 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) INPUT POWER (dBm) [1] Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C [2] This data is relative to the room temperature performance of the HMC602LP4(E) [3] Reference plane at J1 connector on Evaluation PCB Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties th2a0t m Aay lrpeshulat fr oRm oitsa udse,. SCpehceificlamtiosnsf osurbdje,c t Mto cAha n0g1e 8wi2th4ou t Pnohticoe.n Neo : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com 12 - 21 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Input Return Loss vs Frequency [4] Absolute Maximum Ratings 0 Vcc1, Vcc2, Vcc3 +5.5V EN +5.5V B) -10 d VSET Input Voltage +5.5V S ( S LOGOUT Output Current 3 mA O L -20 N RF Input Power +15 dBm R U T Junction Temperature 125 °C E -30 R UT Continuous Pdiss (T = 85°C) 1.55 Watts P (Derate 7.95 mW/°C above 85°C) N -40 I Thermal Resistance (R ) th 42 °C/W 12 (junction to lead) -50 0 1 2 3 4 5 6 7 8 Storage Temperature -65 to +150 °C FREQUENCY (GHz) Operating Temperature -40 to +85 °C T ELECTROSTATIC SENSITIVE DEVICE M OBSERVE HANDLING PRECAUTIONS S [4] Reference plane at J1 connector on Evaluation PCB - Outline Drawing S R O T C E T E D R E W O P NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information 7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC602LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H602 XXXX HMC602LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H602 XXXX [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 12 - 22 rliicgehntss eo fi sth girrda nptaerdti ebsy t h2ima0tp ml icAaayt ilorpens huolrat ofr toRhmer owitsais ueds eu,.n dSCepreh caeinfiycl amptiaotsnesnf tos ourrb djpea,c tte Mtnot cArhiga hn0tgs1 eo 8wf Ai2thn4oaulo t Pgn oDhtiecovei.cn eNeso. : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Pin Descriptions Pin Number Function Description Interface Schematic 1, 6, 7, 13, N/C These pins are not connected internally. 17, 18 2 TEMP Temperature sensor output pin. 12 RF Input pins. Connect RF to INP, and AC couple 3, 4 INP, INN INN to ground for single-ended operation. T M S - Enable pin, connect to Vcc1, Vcc2, Vcc3 for normal operation. S 5 EN Applying voltage <0.2 x (Vcc1, Vcc2, Vcc3) will initiate power R saving mode. O T C E T E D 8 - 12, 19, 20, Vcc1, Vcc2, Bias supply. Connect supply voltage to 23, 24 Vcc3 these pins with appropriate fi ltering. R E W O P 14 CLPF Loop fi lter capacitor for output ripple fi ltering. Logarithmic output that converts the input power 15 LOGOUT to a DC level in detector mode. Short this pin to VSET for detector mode. VSET input in controller mode. Short this 16 VSET pin to LOGOUT for detector mode. Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties th2a0t m Aay lrpeshulat fr oRm oitsa udse,. SCpehceificlamtiosnsf osurbdje,c t Mto cAha n0g1e 8wi2th4ou t Pnohticoe.n Neo : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com 12 - 23 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Pin Descriptions (Continued) Pin Number Function Description Interface Schematic 21, 22 N/C The user should not connect to these pins. Package Base GND Exposed paddle must be connected to RF and DC ground. Application & Evaluation PCB Schematic 12 T M S - S R O T C E T E D R E W O P Notes Note 1: The HMC602LP4 & HMC602LP4E evaluation boards are pre-assembled for single-ended input, and detector/RSSI mode. Note 2: For detector mode, connect high impedance volt meter to the LOGOUT port, and make no connection to VSET. LOGOUT is shorted to VSET by R9, as required for detector mode. Note 3: For controller mode, remove R9 and install 0 ohm resistor (R11), then make appropriate connection to LOGOUT and VSET. In controller mode, the LOGOUT output can be used to drive a variable gain amplifi er, or a variable attenuator, either directly or through a buffer or microcontroller. VSET should be connected to an external supply, typically between +0.6 and +1.9V. Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 12 - 24 rliicgehntss eo fi sth girrda nptaerdti ebsy t h2ima0tp ml icAaayt ilorpens huolrat ofr toRhmer owitsais ueds eu,.n dSCepreh caeinfiycl amptiaotsnesnf tos ourrb djpea,c tte Mtnot cArhiga hn0tgs1 eo 8wf Ai2thn4oaulo t Pgn oDhtiecovei.cn eNeso. : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

HMC602LP4 / 602LP4E v03.0209 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz Evaluation PCB 12 T M S - S R O T C E T List of Materials for Evaluation PCB 121492 [1] E D The circuit board used in the fi nal application should Item Description use RF circuit design techniques. Signal lines R J1 - J3 PC Mount SMA Connector should have 50 ohm impedance while the package E J4 Molex Connector Header ground leads and exposed paddle should be con- W J5 - J9 DC Pin nected directly to the ground plane similar to that O C1, C2, C3, C5, C7 100 pF Capacitor, 0402 Pkg. shown. A sufficient number of via holes should be P C4, C6, C8 0.1μF Capacitor, 0402 Pkg. used to connect the top and bottom ground planes. C9 220 pF Capacitor, 0402 Pkg. The evaluation circuit board shown is available from R1 68Ω Resistor, 0402 Pkg. Hittite upon request. R2 1k Ω Resistor, 0402 Pkg. R3 10k Ω Resistor, 0402 Pkg. R4 - R6, R9, R12 0Ω Resistor, 0402 Pkg. R13 180Ω Resistor, 0402 Pkg. R14 27.4Ω Resistor, 0402 Pkg. R15 15Ω Resistor, 0402 Pkg. R16 49.9Ω Resistor, 0402 Pkg. HMC602LP4 / HMC602LP4E U1 Logarithmic Detector / Controller PCB [2] 121490 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 Information furnishFedo rb yp Arniacloeg ,D deveicleisv eis rbye,li eavend dto tboe apclcaurcatee aondr dreeliarbsle,. pHoleweavesr,e n oc onFtoar cptr icHei,t tdieteliv eMryi,c arnodw toa vpela cCeo orrpdeorrsa: tAionanlo:g Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties th2a0t m Aay lrpeshulat fr oRm oitsa udse,. SCpehceificlamtiosnsf osurbdje,c t Mto cAha n0g1e 8wi2th4ou t Pnohticoe.n Neo : 9P7h8o-n2e:5 708-13-33249-34 7 0F0a (cid:127)x O: r9d7er8 o-n2li5ne0 a-t3 w3w7w3.analog.com 12 - 25 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their reOspredctiever o Ownners-.line at www.hAitptiptleic.actioomn Support: Phone: 1-800-ANALOG-D

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A nalog Devices Inc.: HMC602LP4E 121492-HMC602LP4 HMC602LP4ETR HMC602LP4 HMC602LP4TR