HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Typical Applications Features the hMc547Lc3 is ideal for: high isolation: 45 dB @ 10 Ghz t • Fiber Optics & Broadband Telecom 40 dB @ 20 Ghz M Low insertion Loss: 1.6 dB @ 10 Ghz • Microwave Radio & VSAT S 1.9 dB @ 20 Ghz • Military Radios, Radar, & ECM - Fast Switching: 6 ns t • Test Instrumentation Non-Reflective Design D P 16 Lead ceramic 3x3 mm SMt Package: 9mm2 S - Functional Diagram General Description S e the hMc547Lc3 is a general purpose broadband high h isolation non-reflective GaAs MeSFet SPDt switch c in a ceramic 3x3 mm leadless surface mount package. t covering Dc to 28.0 Ghz, the switch offers over 40 dB i w isolation and less than 2 dB insertion loss at midband. the wide bandwidth, fast switching, and compact size S make this absorbtive SPDt ideal for miliitary ew/ecM and test equipment applications. the switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. Electrical Specifications, T = +25° C, With 0/-5V Control, 50 Ohm System A Parameter Frequency Min. typ. Max. Units Dc - 10.0 Ghz 1.6 2.2 dB insertion Loss 10.0 - 20.0 Ghz 1.9 2.5 dB 20.0 - 28.0 Ghz 2.4 3.0 dB Dc - 10.0 Ghz 40 45 dB isolation 10.0 - 20.0 Ghz 34 40 dB 20.0 - 28.0 Ghz 30 34 dB Return Loss “On State” Dc - 28.0 Ghz 17 dB Dc - 10.0 Ghz 25 dB Return Loss RF1, RF2 “Off State” 10.0 - 20.0 Ghz 15 dB 20.0 - 28.0 Ghz 8 dB Dc - 0.5 Ghz 16 input Power for 1 dB compression dBm 0.5 - 28.0 Ghz 20 23 Input Third Order Intercept Dc - 0.5 Ghz 26 dBm (two-tone input Power= +7 dBm each tone) 0.5 - 28.0 Ghz 46 dBm Switching characteristics tRiSe, tFALL (10/90% RF) Dc - 28.0 Ghz 3 ns tON, tOFF (50% CTL to 10/90% RF) 6 ns InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Insertion Loss Return Loss 0 0 t RFC -1 RF1,RF2 ON M dB) B)-10 RF1,RF2 OFF SS ( -2 S (d S O S NSERTION L -3 ++-428055 CCC RETURN LO--3200 PDt - I -4 S -5 -40 - 0 5 10 15 20 25 30 0 5 10 15 20 25 30 S FREQUENCY (GHz) FREQUENCY (GHz) e h c Isolation Between Ports RFC and RF1/RF2 Isolation Between Ports RF1 and RF2 t i 0 0 w -10 -10 S -20 -20 RF1 PATH ON RF1 RF2 PATH ON B) RF2 B) d-30 d-30 N ( N ( O-40 O-40 TI TI A A OL-50 OL-50 S S I-60 I-60 -70 -70 -80 -80 0 5 10 15 20 25 30 0 5 10 15 20 25 30 FREQUENCY (GHz) FREQUENCY (GHz) Input P1dB and P0.1dB Compression Point Input Third Order Intercept Point 30 55 m) 50 B dB (d 25 m) 45 0.1 dB ND P 20 P3 ( 40 UT P1dB A 15 PP01.d1BdB INPUT I 35 ++-428055 CCC P 30 N I 10 25 0.01 0.1 1 10 100 0.01 0.1 1 10 100 FREQUENCY (GHz) FREQUENCY (GHz) InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Absolute Maximum Ratings Control Voltages RF input Power (A,B = 0V/-5V) +25 dBm State Bias condition t Control Voltage Range (A & B) +5.0V to -7.5V Low 0 to -0.5V @ 10 uA Max. M hot Switch Power Level high -5V @ 3 uA typ. to -7V @ 10 uA typ. (± 0.5V) +22 dBm (A,B = 0V/-5V) S - channel temperature 150 °c Truth Table continuous Pdiss (t=85°c) t (derate 3.3 mw/°c above 85°c) 0.215 w D (insertion Loss Path) control input Signal Path State P thermal Resistance A B RFc to RF1 RFc to RF2 302 °c/w S (insertion Loss Path) high Low On Off continuous Pdiss (t=85°c) Low high Off On - (derate 5.6 mw/°c above 85°c) 0.363 w S (terminated Path) e thermal Resistance h (terminated Path) 179 °c/w ELECTROSTATIC SENSITIVE DEVICE c Storage temperature -65 to +150 °c OBSERVE HANDLING PRECAUTIONS t Operating Temperature -40 to +85 °c i w eSD Sensitivity (hBM) class 1A S InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Outline Drawing t M S - t D P S - S e h c t i w NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. S 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C – 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [2] hMc547Lc3 Alumina, white Gold over Nickel MSL3 [1] h547 XXXX [1] Max peak reflow temperature of 260 °c [2] 4-Digit lot number XXXX InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Pin Descriptions Pin Number Function Description interface Schematic t M this pin should be connected to PcB RF ground to 1, 5, 9, 12, 16 N/c maximize isolation S - 2, 4, 6, 8, 13, 15 GND Package bottom has exposed metal paddle that must also be connected to PcB RF ground. t D This pin is DC coupled and matched to 50 Ohm. Blocking P 3, 7, 14 RFc, RF1, RF2 capacitors are required if RF line potential is not equal to 0V. S - 10 B See truth table and control voltage table. S e 11 A See truth table and control voltage table. h c t i w S InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC547LC3 v01.0514 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, DC - 28.0 GHz Evaluation PCB t M S - t D P S - S e h c t i w S List of Materials for Evaluation PCB EVAL01-HMC547LC3 [1] the circuit board used in the application should be item Description generated with proper RF circuit design techniques. J1 - J3 PcB Mount SRi SMA connector Signal lines at the RF port should have 50 Ohm J4 - J6 Dc Pin impedance and the package ground leads and R1 - R2 100 Ohm Resistor, 0603 Pkg. package bottom should be connected directly to U1 hMc547Lc3 SPDt Switch the ground plane similar to that shown above. the PcB [2] 600-00005-00-1 evaluation PcB evaluation circuit board shown above is available [1] Reference this number when ordering complete evaluation PcB from hittite Microwave corporation upon request. [2] circuit Board Material: Rogers 4350 InfoFrmoart iopn rfiucrneis,h edde blyi vAenraylo ga Dnedvic teos ips lbaelcieeve do rtod beer sac:c Huraittet iatned Mreliiacbrleo. wHoawveeve rC, noo rpoForar tpioricne,, 2d eElilviezrayb, aentdh tDo rpivlaec,e C ohrdeelrms: sAfonardlo,g MDeAv i0ce1s8, 2In4c., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-2li9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urespppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D