HMC514LP5 514LP5E / v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz Typical Applications Features Low noise MMIC VCO w/Half Frequency, Divide-by-4 Dual Output: Fo = 11.17 - 12.02 GHz Outputs for: Fo/2 = 5.58 - 6.01 GHz • VSAT Radio Pout: +7 dBm • Point to Point/Multipoint Radio Phase Noise: -110 dBc/Hz @100 KHz Typ. • Test Equipment & Industrial Controls No External Resonator Needed • Military End-Use 32 Lead 5x5mm SMT Package: 25mm² Functional Diagram General Description The HMC514LP5 & HMC514LP5E are GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. The HMC514LP5 & HMC514LP5E integrate resona- tors, negative resistance devices, varactor diodes and feature half frequency and divide-by-4 outputs. The VCO’s phase noise performance is excellent over tem- perature, shock, and process due to the oscillator’s 8 monolithic structure. Power output is +7 dBm typical from a +3V supply voltage. The prescaler function can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless T M QFN 5x5 mm surface mount package, and requires no external matching components. S - T U P T Electrical Specifications, T = +25° C, Vcc1, Vcc2 = +3V A U O Parameter Min. Typ. Max. Units Frequency Range Fo 11.17 - 12.02 GHz 2 Fo/2 5.585 - 6.01 GHz / o RFOUT +5 +10 dBm F Power Output RFOUT/2 +5 +11 dBm RFOUT/4 -10 -4 dBm h SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT -110 dBc/Hz t wi Tune Voltage Vtune 2 13 V Supply Current Icc1 & Icc2 240 275 290 mA S Tune Port Leakage Current (Vtune= 13V) 10 µA O Output Return Loss 2 dB C Harmonics/Subharmonics 1/2 30 dBc V 3/2 24 dBc 2nd 17 dBc 3rd 28 dBc Pulling (into a 2.0:1 VSWR) 4 MHz pp Pushing @ Vtune= 5V 18 MHz/V Frequency Drift Rate 1.2 MHz/°C InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 8 - 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC514LP5 / 514LP5E v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz Frequency vs. Tuning Voltage, T= 25°C Frequency vs. Tuning Voltage, Vcc= +3V 12.6 12.6 z)12.2 z)12.2 H H G G Y ( Y ( C11.8 C11.8 N N E E U U Q11.4 Q11.4 E E R R F Vcc=2.75V F UT 11 Vcc=3.0V UT 11 ++2855 CC TP Vcc=3.25V TP -40 C U U O10.6 O10.6 10.2 10.2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) Output Power Sensitivity vs. Tuning Voltage, Vcc= +3V vs. Tuning Voltage, Vcc= +3V 600 15 8 500 +25 C MHz/VOLT)400 ++-428055 CCC WER (dBm) 192 +-4805 CC Y (300 O T T P SITIVI200 TPUT 6 M N U S E O S 3 100 - T 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 U TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) P T U O SSB Phase Noise vs. Tuning Voltage SSB Phase Noise @ Vtune= +5V 2 -70 0 / o -20 Hz)-80 Hz) F SE (dBc/-90 SE (dBc/--6400 ++-428055 CCC th NOI NOI-80 wi SE -100 10kHz offset SE A 100kHz offset A-100 S H H B P B P-120 O S-110 S S S C -140 V -120 -160 1 2 3 4 5 6 7 8 9 10 11 12 13 103 104 105 106 107 TUNING VOLTAGE (VOLTS) OFFSET FREQUENCY (Hz) InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 8 - 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC514LP5 / 514LP5E v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz RFOUT/2 Frequency RFOUT/2 Output Power vs. Tuning Voltage, Vcc= +3V vs. Tuning Voltage, Vcc= +3V 6.3 15 z) 6.1 GH m) 12 ENCY ( 5.9 ER (dB 9 U W Q 5.7 O E P PUT FR 5.5 ++-428055 CCC UTPUT 6 T O +25 C U 3 +85 C O 5.3 -40 C 5.1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) Divide-by-4 Frequency Divide-by-4 Output Power vs. Tuning Voltage, Vcc= +3V vs. Tuning Voltage, Vcc= +3V 3.15 0 3.1 8 ENCY (GHz)232..90.9553 ER (dBm) --63 ++-428055 CCC U W T EQ2.85 PO SM TPUT FR22.27..758 ++2855 CC OUTPUT -9 OU2.65 -40 C -12 - 2.6 T 2.55 -15 U 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 P TUNING VOLTAGE (VOLTS) TUNING VOLTAGE (VOLTS) T U O Absolute Maximum Ratings Typical Supply Current vs. Vcc 2 / Vcc1, Vcc2 +3.5 Vdc Vcc (V) Icc (mA) o Vtune 0 to +15V 2.75 230 F Junction Temperature 135 °C 3.0 275 h Continuous Pdiss (T=85 °C) 3.25 320 t 1.3 W i (derate 27 mW/C above 85 °C Note: VCO will operate over full voltage range shown above. w Thermal Resistance 37.5 °C/W S (junction to ground paddle) ELECTROSTATIC SENSITIVE DEVICE O Storage Temperature -65 to +150 °C OBSERVE HANDLING PRECAUTIONS C Operating Temperature -40 to +85 °C V InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 8 - 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC514LP5 / 514LP5E v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 8 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. T 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. M Package Information S Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] - HMC514LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL3 [1] H514 T XXXX U HMC514LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [2] H514 P XXXX T [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C U [3] 4-Digit lot number XXXX O Pin Descriptions 2 / Pin Number Function Description Interface Schematic o F 1 - 3, 7 - 10, 13 - 18, 20, N/C No Connection. These pins may be connected to RF/ DC ground. Performance will not be affected. h 22 - 28, 30 - 32 t i w S 4 RFOUT/4 Divide-by-4 Output. O C V Supply Voltage for prescaler. If prescaler is not 6 VCC1 required, this pin may be left open to conserve 40 mA of current. InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 8 - 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC514LP5 / 514LP5E v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz Pin Descriptions Pin Number Function Description Interface Schematic 12 RFOUT/2 Half frequency output (AC coupled). 19 RF OUT RF output (AC coupled). 21 VCC2 Supply Voltage, +3V Control Voltage Input. Modulation port bandwidth 29 VTUNE 8 dependent on drive source impedance. Package bottom has an exposed metal paddle that 5, 11, Paddle GND must be connected to RF/DC ground. T M S Typical Application Circuit - T U P T U O 2 / o F h t i w S O C V InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 8 - 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mlicaaPyt iorhenso uonlrt ofertoh:m e9r wit7sis 8ues -eu2.n dS5ep0re ca-inf3iyc 3aptia4otne3sn ts ou rb jpeFacttae tnoxt c:r hig9ahn7tgs 8eo wf- 2Aithn5oau0lot g-n 3oDti3ecve7i.c 3eNso . POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D

HMC514LP5 / 514LP5E v03.0811 MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.17 - 12.02 GHz Evaluation PCB 8 T M S - T U P T U O List of Materials for Evaluation PCB 110227 [1] The circuit board used in the application should use 2 Item Description / RF circuit design techniques. Signal lines should o J1 - J4 PCB Mount SMA RF Connector have 50 Ohm impedance while the package ground F J5 - J6 2 mm DC Header leads and backside ground paddle should be con- h C1 - C2 100 pF Capacitor, 0402 Pkg. t nected directly to the ground plane similar to that C3 1,000 pF Capacitor, 0402 Pkg. wi shown. A sufficient number of via holes should be C4 - C5 2.2 µF Tantalum Capacitor used to connect the top and bottom ground planes. S U1 HMC514LP5 / HMC514LP5E VCO The evaluation circuit board shown is available from O PCB [2] 110225 Eval Board Hittite upon request. C [1] Reference this number when ordering complete evaluation PCB V [2] Circuit Board Material: Rogers 4350 InforFmaotiro np fruircniseh,e dd beyl iAvnealroyg Daenvidce st ois pbelaliecveed otor dbee arcsc:u rHateit taintde reMliaibcler. oHwowaevveer, Cnoo rpFoorr aptriiocen,, d2e0liv Aerlyp, haand R too apdla,c Ce horedlemrss: fAonrdal,o gM DAe v0ic1e8s2, 4Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that maPy rhesounlt fero:m 9 it7s 8us-e2. S5p0ec-if3ic3ati4on3s s u b jeFcta tox c: h9an7g8e w-2ith5ou0t -n3oti3ce7. 3No POhrodnee:r 7 O81n-3-l2i9n-e4 7a0t0 w(cid:127) wOrwde.hr oitntliitnee. cato wmww.analog.com 8 - 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks arAe tphep plriocpearttyi oof nth eSir urepsppecotivret :o wPnehrso.ne: 978-250-3A3p4p3li c aotrio na Spuppsp@orht: iPtthitoen.ec: o1-m800-ANALOG-D