HMC485MS8G 485MS8GE / v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Typical Applications Features High Dynamic Range Infrastructure: +34 dBm Input IP3 • GSM, GPRS & EDGE Conversion Loss: 9 dB • CDMA & W-CDMA Low LO Drive: -2 to +4 dBm E • Cable Modem Termination Systems Single Positive Supply: 5V @ 45 mA 9 Ultra Small MSOP Package: 14.8mm2 Included in the HMC-DKT003 Designer’s Kit Functional Diagram General Description T M E The HMC485MS8G & HMC485MS8GE are high dy- S namic range passive MMIC mixers with integrated - LO amplifi er in plastic surface mount 8 lead Mini 3 SmLall Outline Packages (MSOP) covering 1.7 to 2.4 P GHz. Excellent input IP3 performance of +34 dBm I for down conversion and +27 dBm for up conver- H O sion is provided for 2.5G & 3G GSM/CDMA based G UMTS or PCS applications at an LO drive of 0 dBm. I H With an input 1 dB compression of +19 dBm, the - RF port will accept a wide range of input signal lev- S S els. Conversion loss is 9.2 dB typical. The 50 to 300 R MHz IF frequency response will satisfy many UMTS/ E PCS transmit or receive frequency plans confi gured X for low side LO. The HMC485MS8G(E) input IP3 B I M performance coupled with its high P1dB rivals tradi- tional active FET mixers while offering a much smaller 14.8mm2 standard IC footprint. O Electrical Specifi cations, T = +25°C, LO = 0 dBm, IF = 200 MHz*, Vdd= 5V A Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units Frequency Range, RF 1.7 - 1.8 1.8 - 2.0 2.0 - 2.2 2.2 - 2.4 GHz Frequency Range, LO 1.4 - 1.75 1.5 - 1.95 1.7 - 2.15 1.9 - 2.35 GHz Frequency Range, IF 50 - 300 50 - 300 50 - 300 50 - 300 MHz Conversion Loss 9.8 11 9.2 10.5 9 10 9.5 10.5 dB Noise Figure (SSB) 9.8 9.2 9 9.5 dB LO to RF Isolation 12 8 5 5 dB LO to IF Isolation 7 10 13 12 dB IP3 (Input) 27 31 29 34 29 33 29 32 dBm 1 dB Gain Compression (Input) 16 19 17 20 17 21 18.5 21.5 dBm LO Input Drive Level (Typical) -2 to +4 -2 to +4 -2 to +4 -2 to +4 dBm Supply Current 45 45 45 45 mA *Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz. Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 9 - 292 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm 0 0 dB) -5 -5 RSION GAIN ( -10 LATION (dB) --1150 E 9 E O ONV -15 ++ 2855CC IS TRF TO IF C - 40C -20 LO TO RF LO TO IF T -20 -25 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 E1.9 2 2.1 2.2 2.3 2.4 2.5 M RF FREQUENCY (GHz) FREQUENCY (GHz) S - L 3 Conversion Gain vs. LO Drive Return Loss @ LO = 0 dBm P I 0 0 H O RF G AIN (dB) -5 S (dB) -1-68 LO HI VERSION G -10 LO = -4 dBm S ETURN LOS -24 RS - ON -15 LLOO == - 20 ddBBmm R E C LLOO == ++24 ddBBmm -32 X B I M -20 -40 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 RF FREQUENCY (GHz) FREQUENCY (GHz) O Upconverter Performance Conversion Gain @ LO = 0 dBm IF Bandwidth @ LO = 0 dBm 0 0 B) -5 -5 CONVERSION GAIN d RETURN LOSS N ( B) GAI E (d N -10 S -10 O N NVERSI-15 RESPO -15 O C -20 -20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 0 50 100 150 200 250 300 350 400 450 500 RF FREQUENCY (GHz) IF FREQUENCY (MHz) *Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz. Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 9 - 293 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Input IP3 vs. Temperature @ LO= 0 dBm Input IP3 vs. LO Drive 40 40 35 35 m) m) E B B d d 3 ( 3 ( P 30 P 30 9 T I T I U U P P IN 25 ++ - 284550CCC IN 25 TLLLLOOOO ==== -0++2d24dBddBBBmmmm T 20 20 M 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 E1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) S - 3 Input IP2 vs. InpLut IP2 vs. P Temperature @ LO= 0 dBm LO Drive @ IF= 200 MHz I H 45 45 O G 40 40 I H m) m) B B d 35 d 35 RS - PUT IP2 ( 30 S PUT IP2 ( 30 N N XE I 25 + +- 284550BCCC I 25 ++- 2024 ddddBBBBmmmm I M 20 20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) O Input P1dB vs. Upconverter IP3 Temperature @ LO= 0 dBm vs. LO Drive, IF= 200 MHz 25 40 - 2dBm 0dBm 23 - 2dBm 35 - 4dBm T P1dB (dBm) 1291 UT IP3 (dBm) 30 U P P N IN + 25C I 25 17 + 85C - 40C 15 20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 9 - 294 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Input IP3 vs. LO Drive, IF= 70 MHz Input IP3 vs. LO Drive, IF= 120 MHz 40 4400 35 3355 m) m)m) E B BB P3 (d 30 P3 (dP3 (d 3300 UT I UT IUT I 9 P PP IN 25 - 02 ddBBmm ININ 2255 T - - 0022 ddddBBBBmmmm + 2 dBm ++ 22 ddBBmm + 4 dBm ++ 44 ddBBmm T 20 2200 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 11..77 11..88 E11..99 22 22..11 22..22 22..33 22..44 22..55 M FREQUENCY (GHz) FFRREEQQUUEENNCCYY ((GGHHzz)) S - L 3 Input IP3 vs. LO Drive, IF= 170 MHz Input IP3 vs. LO Drive, IF= 247 MHz P I 40 40 H O G 35 35 I m) m) H B B d d T IP3 ( 30 S T IP3 ( 30 S - PU PU R IN 25 -0 2d BdBmm IN 25 - 02 ddBBmm E + 2 dBm + 2 dbm + 4 dBm + 4 dBm X B I 20 20 M 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) FREQUENCY (GHz) O Input IP3 vs. LO Drive, IF= 297 MHz 40 35 m) B d 3 ( P 30 T I U P IN 25 - 02 ddBBmm + 2dBm + 4dBm 20 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 FREQUENCY (GHz) Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 9 - 295 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz MxN Spurious Outputs Harmonics of LO nLO nLO Spur at RF Port mRF 0 1 2 3 4 LO Freq GHz 1 2 3 4 0 xx -1. 19 15 15 1.5 19 15 35 24 1 4 0 30 25 44 1.6 17 15 E33 24 2 54 69 39 56 55 1.7 14 14 29 23 9 3 75 82 83 74 72 1.8 10 15 25 24 4 78 82 83 83 82 1.9 8 T20 22 23 RF Freq = 1.9 GHz @ 0 dBm 2 6 20 22 24 LO Freq = 1.7 GHz @ 0 dBm LO power = 0 dBm T All values in dBc Relative to the IF power level. All values in dBc below input LO level measured at RF port. M E S - 3 L P I H O G I H - S S R E X B I M O Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 9 - 296 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Absolute Maximum Ratings RF/IF Input +27 dBm ELECTROSTATIC SENSITIVE DEVICE LO Drive +10 dBm OBSERVE HANDLING PRECAUTIONS Bias Supply (Vdd) +7 Vdc Channel Temperature 150 °C E Continuous Pdiss (T = 85°C) 0.85 W (Derate 13.2 mW/°C above 85°C) 9 Storage Temperature -65 to +150 °C T Operating Temperature -40 to +85 °C IF DC Current ±40 mA ESD Sensitivity (HBM) Class 1A T E M S - L 3 Outline Drawing P I H O G I H - S S R E X B I M O NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC485MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H485 XXXX HMC485MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H485 XXXX [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 9 - 297 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Pin Descriptions Pin Number Function Description Interface Schematic This pin is AC coupled E 1 LO and matched to 50 Ohms. 9 T 2 N/C Not connected. T 3, 6, 7 GND This pin must be connected to RF ground. M E S - 3 L P I Power supply for LO amplifi er. H 4 Vdd An external RF bypass capacitor is required. O G I H - S S R This pin is DC coupled. For applications not requiring operation to DC this port should be DC blocked externally E using a series capacitor. Choose value of capacitor to pass 5 IF Port X IF frequency desired. For operation to DC, this pin must I Bnot sink/source more than 40 mA of current or failure may M result. O This pin is DC coupled 8 RF Port and matched to 50 Ohms. Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 9 - 298 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC485MS8G / 485MS8GE v03.0507 HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.4 GHz Evaluation PCB E 9 T T E M S - L 3 P I H O G I H - S S R List of Materials for Evaluation PCB 105188 [1] E X B The circuit board used in the fi nal application should Item Description I use RF circuit design techniques. Signal lines M J1 - J3 PCB Mount SMA RF Connector should have 50 ohm impedance while the package J4 - J5 DC Pin ground leads and exposed paddle should be con- C1 10O,000 pF Chip Capacitor, 0603 Pkg. nected directly to the ground plane similar to that U1 HMC485MS8G / HMC485MS8GE Mixer shown. A sufficient number of via holes should be PCB [2] 104813 Evaluation Board, 1.0” x 1.0” used to connect the top and bottom ground planes. [1] Reference this number when ordering complete evaluation PCB The evaluation circuit board shown is available from [2] Circuit Board Material: Rogers 4350 Hittite upon request. Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 9 - 299 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D