HMC361S8G 361S8GE / v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Typical Applications Features 4 4 Prescaler for DC to X band PLL applications: Ultra low SSB phase noise: -148 dBc/Hz • Satellite communication systems Wide bandwidth • Fiber optic Output power: 3 dBm T T M • Point-to-point and point-to-multi-point radios Single DC supply: +5V M S • VSAT S8G SMT package S - - S S R R O Functional Diagram General Description O T T C The HMC361S8G & HMC361S8GE are low noise C E E divide-by-2 static dividers with InGaP GaAs HBT T T technology in 8 lead surface mount plastic pack- E E ages. This device operates from DC (with a square D D wave input) to 10 GHz input frequency with a single & +5V DC supply. The low additive SSB phase noise of & S -148 dBc/Hz at 100 kHz offset helps the user maintain S R good system noise performance. R E E D D I I V V I I D D Y Y C C N N E E U U Q Electrical Specifications, T = +25° C, 50 Ohm System, Vcc = 5V Q A E E Parameter Conditions Min. Typ. Max. Units R R Input frequency Sine wave input. [1] [2] 0.4 10 GHz F F Input power range Fin = 0.4 GHz to 1 GHz -5 +10 dBm Fin = 1 GHz to 8 GHz -15 +10 dBm Fin = 8 GHz to 10 GHz -10 +2 dBm Output power Fin = 6 GHz 0 3 dBm Fin = 10 GHz -6 dBm Reverse leakage Both RF outputs terminated 45 dB SSB phase noise (100 kHz offset) Pin = 0 dBm, Fin = 6 GHz -148 dBc/Hz Output transition time Pin = 0 dBm, Fout = 882 MHz 100 ps Supply current (Icc) 83 mA [1] Divider will operate down to near DC for square-wave input signal. [2] For stable operation without an input signal, refer to Analog Devices Application Note, “Frequency Divider Operation & Compensation with No Input Signal.” InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 4 - 1 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mli9caa7yt ior8ens- uo2lrt 5ofrto0hme-r 3witsi3s ue4s eu3.n dS tepere cal inf•iyc ap9tiao7tne8sn ts -ou2rb 5jpeac0tte -tno3t cr3higa7hnt3gs e o fwfa Aitxhnoa u•lot gnO oDtirecdvei.ce eNsro. onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D

HMC361S8G / 361S8GE v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Input Sensitivity Window, T = 25 °C Input Sensitivity Window vs. Temperature 4 4 20 20 10 10 m) m) B B MT ER (d 0 Recommended ER (d 0 MMainx PPiinn ++2255 CC MT W W Min Pin +85 C O Operating Window O Max Pin +85 C S T P-10 T P-10 MMainx PPiinn --4400 CC S U U - NP NP - S I-20 I-20 S R R O -30 -30 O 0 1 23 4 56 78 9 10 11 12 13 0 1 2 3 4 5 6 7 8 9 10 11 12 13 T T INPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) C C E E T Residual Phase Noise Performance, T E Output Power vs. Temperature Pin = 0 dBm, T = 25 °C E D D 10 0 & 8 -20 & IVIDERS OUTPUT POWER (dBm) 0246 ++-428055 CCC B PHASE NOISE (dBc/Hz)--11---2086400000 IVIDERS D -2 SS D -140 Y -4 -160 Y C 0 2 4 6 8 10 12 14 102 103 104 105 106 107 C N INPUT FREQUENCY (GHz) OFFSET FREQUENCY (Hz) N E E U Output Harmonic Content, U Q Pin = 0 dBm, T = 25 °C Reverse Leakage, Pin = 0 dBm, T = 25 °C Q E E 0 0 R R F F -10 Pfeedthru -10 Bm) 3rd Harmonic Bm) BOonteh OOuuttppuutt PPoorrtt sT eTremrminiantaetded EL (d-20 EL (d-20 V V E E TPUT L-30 WER L-30 U O O P -40 -40 -50 -50 0 2 4 6 8 10 12 0 2 4 6 8 10 12 14 INPUT FREQUENCY (GHz) INPUT FREQUENCY (GHz) InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that m9a7y r8es-u2lt 5fro0m- 3its3 u4se3. S tpeecl if•ic a9tio7n8s s-u2b5jec0t -to3 c3ha7n3ge fwaitxho u•t nOotircde.e Nro onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com 4 - 2 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D

HMC361S8G / 361S8GE v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Output Voltage Waveform, Pin = 0 dBm, Fout = 882 MHz, T = 25 °C Absolute Maximum Ratings 4 4 500 RF input (Vcc = +5V) +13 dBm Vcc +5.5V 300 VLogic Vcc -1.6V to Vcc -1.2V SMT LITUDE (mV)-110000 C(Jduoennrcatittnieou n1o 5ute.s9m PmpdeWisra/s°t Cu(Tr ea = b( To8Jv5)e ° C85) °C) 103.759 °WC SMT MP Thermal resistance (RTH) 63 °C/W - A (junction to ground paddle) - S -300 Storage temperature -65 °C to +150 °C S R R Operating temperature -40 °C to +85 °C O -500 O 22.7 23.1 23.5 23.9 24.3 24.7 T T TIME (nS) Typical Supply Current vs. Vcc C C E E Vcc (V) Icc (mA) T T 4.75 74 E ELECTROSTATIC SENSITIVE DEVICE E 5.0 83 D OBSERVE HANDLING PRECAUTIONS D 5.25 89 & & Note: Divider will operate over full voltage range shown above S S R Outline Drawing R E E D D I I V V I I D D Y Y C C N N E E U U Q Q E E R NOTES: R 1. LEADFRAME MATERIAL: COPPER ALLOY F F 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC361S8G Low stress injection molded plastic Sn/Pb solder MSL1 [1] H361 XXXX HMC361S8GE RoHS-compliant low stress injection molded plastic 100% matte Sn MSL1 [2] H361 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-digit lot number XXXX InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 4 - 3 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mli9caa7yt ior8ens- uo2lrt 5ofrto0hme-r 3witsi3s ue4s eu3.n dS tepere cal inf•iyc ap9tiao7tne8sn ts -ou2rb 5jpeac0tte -tno3t cr3higa7hnt3gs e o fwfa Aitxhnoa u•lot gnO oDtirecdvei.ce eNsro. onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D

HMC361S8G / 361S8GE v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Pin Description 4 4 Pin Number Function Description Interface Schematic Divided output 180° out of phase with pin 3 T 1 OUT T and must be DC blocked M M S S - 2, 6 N/C N/C or ground - S S R R O O 3 OUT Divided output, DC block required T T C C E E T T E E D 4 VCC Supply voltage 5V ± 0.25V. D & & S S R R 5 IN RF input must be DC blocked. E E D D I I V V I I D D RF input 180° out of phase with pin 5, DC block required for Y 7 IN Y differential operation or A/C ground for single ended applications C C N N E E Ground backside of package has exposed metal ground slug U 8 GND U which must be connected to ground. Q Q E E R R F F InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that m9a7y r8es-u2lt 5fro0m- 3its3 u4se3. S tpeecl if•ic a9tio7n8s s-u2b5jec0t -to3 c3ha7n3ge fwaitxho u•t nOotircde.e Nro onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com 4 - 4 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D

HMC361S8G / 361S8GE v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Evaluation PCB 4 4 T T M M S S - - S S R R O O T T C C E E T T E E D D & & S S R R E E D D I I V V I I D D Y Y C C N N E E U U Q List of Materials for Evaluation PCB 104631 [1] Q E The circuit board used in the application should use E Item Description R R RF circuit design techniques. Signal lines should J1 - J3 PCB mount SMA RF connector F F have 50 Ω impedance while the package ground C1 - C4 100 pF capacitor, 0402 pkg. leads and backside ground slug should be con- C5 1000 pF capacitor, 0603 pkg. nected directly to the ground plane similar to that C6 10 µF tantalum capacitor shown. A sufficient number of via holes should be U1 HMC361S8G / HMC361S8GE divide-by-2 used to connect the top and bottom ground planes. PCB [2] 104627 eval board The evaluation circuit board shown is available [1] Reference this number when ordering complete evaluation PCB from Hittite upon request. This evaluation board is [2] Circuit board material: Rogers 4350 designed for single ended input testing. J2 and J3 provide differential output signals. InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 4 - 5 rliicgehntss eo fi sth girrda nptaerdti ebsy t himatp mli9caa7yt ior8ens- uo2lrt 5ofrto0hme-r 3witsi3s ue4s eu3.n dS tepere cal inf•iyc ap9tiao7tne8sn ts -ou2rb 5jpeac0tte -tno3t cr3higa7hnt3gs e o fwfa Aitxhnoa u•lot gnO oDtirecdvei.ce eNsro. onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D

HMC361S8G / 361S8GE v07.1114 SMT GaAs HBT MMIC DIVIDE-BY-2, DC - 10 GHz Application Circuit 4 4 T T M M S S - - S S R R O O T T C C E E T T E E D D & & S S R R E E D D I I V V I I D D Y Y C C N N E E U U Q Q E E R R F F InformatiFono fru rpnisrhiecde b, yd Aenalilovge Dryev iacens dis tboe lipevleadc toe boe radcecurrsat:e Aannda reloliagbl eD. Heovwiecveer,s n, oI ncF.o, rO pnricee T, edeclhivneroyl,o agnyd Wto apyla, cNe oorrwdeorso: dA,n MaloAg 0D2e0vi6ce2s, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that m9a7y r8es-u2lt 5fro0m- 3its3 u4se3. S tpeecl if•ic a9tio7n8s s-u2b5jec0t -to3 c3ha7n3ge fwaitxho u•t nOotircde.e Nro onPlhinoene a: 7t 8w1-w32w9.-a47n0a0l o(cid:127) gO.rcdoerm o/nhliinteti taet mwwww.analog.com 4 - 6 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademaArksp aprel ithcea ptroiopenrt ys ouf tphepir roesrpte: cPtivhe oownneer:s .978-250-3343A oprp RlicFatMionG S-uapppposrt@: Pahnonaelo: 1g-.8c0o0m-ANALOG-D