Analog Devices Welcomes Hittite Microwave Corporation E T NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED E L O S B O www.analog.com www.hittite.com

E THIS PAGE INTENTIONALLY LEFT BLANKT E L O S B O

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Typical Applications Features The HMc207as8 / HMc207as8e is ideal for: conversion loss: 9 db T • Base Stations lo / iF isolation: 45 db M • Cable Modems lo / rF isolation: 40 db s E • Portable Wireless input iP3: +17 dbm - D e T c n Functional Diagram General Description a E l The HMc207as8 & HMc207as8e are miniature dou- a ble-balanced mixers in 8 lead plastic surface mount b Small Outline IC (SOIC) packages. This passive e L MMIC mixer is constructed of GaAs Schottky diodes l and novel planar transformer baluns on the chip. The b u device can be used as an upconverter, downconverter, O o biphase modulator (de)modulator, or phase compara- D tor. The consistent MMIC performance will improve system operation and assure regulatory compliance. & The high LO suppression of 45 to 50 dB yields excel- S e lent carrier suppression for modulator applications. l g n B i s - s O r e Electrical Specifications, T = +25° C, As a Function of LO Drive x A i M lo = +13 dbm lo = +10 dbm Parameter iF = 70 MHz iF = 70 MHz units Min. Typ. Max. Min. Typ. Max. Frequency Range, RF & LO 0.7 - 2.0 0.8 - 1.2 gHz Frequency Range, IF Dc - 0.3 Dc - 0.3 gHz conversion loss 9 10.5 7.5 10 db Noise Figure (SSB) 9 10.5 7.5 10 db lo to rF isolation 32 40 40 45 db lo to iF isolation 38 45 40 45 db rF to iF isolation 17 23 18 22 db iP3 (input) 14 17 12 15 dbm 1 db gain compression (input) 8 11 7 10 dbm For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 1 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Conversion Loss vs Isolation @ LO = +13 dBm Temperature @ LO = +13 dBm 0 0 dB) -5 -10 LLROOF tttooo RIIFFF MT CONVERSION LOSS (--1150 +-4205 CC ISOLATION (dB)---432000 T E ceD - s +85 C -50 n -20 -60 a 0.5 1 1.5 2 0.5 E1 1.5 2 l FREQUENCY (GHz) FREQUENCY (GHz) a b L e Conversion Loss vs. LO Drive Return Loss @ LO = +13 dBm l b 0 0 u O +7 dBm +13 dBm o B) +9 dBm +15 dBm -5 S (d -5 +11 dBm dB) D LOS SS (-10 & CONVERSION --1150 S RETURN LO--2105 RIFF gle B LO n i -20 -25 s 0.5 1 1.5 2 0 0.5 1 1.5 2 FREQUENCY (GHz) FREQUENCY (GHz) - s O r P1dB vs. e IF Bandwidth @ LO = +13 dBm Temperature @ LO = +13 dBm x 0 15 i M -5 14 B) -40 C OSS (d-10 m) 13 ++2855 CC L B SION -15 dB (d 12 ER P1 V-20 11 N O C -25 10 -30 9 0 0.2 0.4 0.6 0.8 1 0.5 0.8 1.1 1.4 1.7 2 IF FREQUENCY (GHz) FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 2 Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Input IP3 vs. Input IP3 vs. LO Drive Temperature @ LO = +13 dBm 30 35 T 25 30 -40 C M ++2855 CC 20 s Bm) 15 Bm) 25 E D - P3 (d 10 P3 (d 20 I I e +9 dBm 15 5 +11 dBm T c +13 dBm 0 10 n a -5 5 0.5 0.8 1.1 1.4 1.7 2 0.5 0.E8 1.1 1.4 1.7 2 l a LO FREQUENCY (GHz) LO FREQUENCY (GHz) b e InpLut IP2 vs. l Input IP2 vs. LO Drive Temperature @ LO = +13 dBm b 70 70 u O o 60 60 D 50 & m) 40 m) 50 B B d d e IP2 ( 30 S IP2 ( 40 l -40 C 20 +25 C g +9 dBm +85 C +11 dBm 30 n 10 +13 dBBm si 0 20 0.5 0.8 1.1 1.4 1.7 2 0.5 0.8 1.1 1.4 1.7 2 - LO FREQUENCY (GHz) LO FREQUENCY (GHz) s O r e MxN Spurious Outputs Harmonics of LO x i M nlo lo Freq. nlo spur at rF Port mrF 0 1 2 3 4 (gHz) 1 2 3 4 0 xx 14 27 22 44 0.7 48 38 66 50 1 16 0 46 45 46 0.9 64 33 73 63 2 68 62 67 69 73 1.1 47 32 54 54 3 89 92 91 65 86 1.3 40 34 39 55 4 >105 >105 >105 95 96 1.5 39 40 45 57 rF = 0.9 gHz @ -10 dbm 1.7 38 51 42 60 lo = 0.97 gHz @ +13 dbm lo = +13 dbm All values in dBc relative to the IF Values in dBc below input LO level measured at RF Port. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 3 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Absolute Maximum Ratings rF / iF input +13 dbm elecTrosTaTic sensiTiVe DeVice lo Drive +27 dbm T obserVe HanDling PrecauTions Storage Temperature -65 to +150 °c M Operating Temperature -40 to +85 °c E s ESD Sensitivity (HBM) class 1a - D e T c n a E Outline Drawing l a b L e l b u O o D & S e l g B n i s - s O noTes: r 1. leaDFraMe MaTerial: coPPer alloY e 2. DiMensions are in incHes [MilliMeTers]. 3. DiMension Does noT incluDe MolDFlasH oF 0.15mm Per siDe. x 4. DiMension Does noT incluDe MolDFlasH oF 0.25mm Per siDe. i M 5. all grounD leaDs MusT be solDereD To Pcb rF grounD. Package Information Part Number Package Body Material lead Finish MSL Rating Package Marking [3] HMc207as8 Low Stress Injection Molded Plastic Sn/Pb Solder Msl1 [1] H207a xxxx HMc207as8e RoHS-compliant Low Stress Injection Molded Plastic 100% matte sn Msl1 [2] H207a xxxx [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Pin Descriptions Pin Number Function Description Interface Schematic T M 1, 3, 6, 8 gnD Package bottom must also be connected to RF/DC ground. s E - D This pin is DC coupled 2 lo and matched to 50 Ohm. e T c n No connection required. These pins may be connected to RF/ 4 n/c a DC ground without affecting performance. E l This pin is DC coupled. For applications not requiring opera- a tion to DC, this port should be DC blocked externally using a b 5 iF series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin e must not source or sink more than 10 mA ofL current or part non-function and possible part failure will result. l b u This pin is DOC coupled o 8 rF and matched to 50 Ohm. D & S e l g n B i s - s O r e x i M For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 5 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com

HMC207AS8 / 207AS8E v01.0112 GaAs MMIC SMT DOUBLE- BALANCED MIXER, 0.7 - 2.0 GHz Evaluation PCB T M E s - D e T c n a E l a b L e l b u O o D & S e l g B n i s - s O r e List of Materials for Evaluation PCB 101785 [1] x The circuit board used in the application should use i item Description M RF circuit design techniques. Signal lines should J1 - J3 PCB Mount SMA RF Connector have 50 Ohm impedance while the package ground u1 HMC207AS8 / HMC207AS8E Mixer leads should be connected directly to the ground Pcb [2] 101783 evaluation board plane similar to that shown. A sufficient number of [1] Reference this number when ordering complete evaluation PCB via holes should be used to connect the top and [2] Circuit Board Material: Rogers 4350 bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 Application Support: Phone: 978-250-3343 or apps@hittite.com