HMC188MS8 188MS8E / v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Typical Applications Features 7 The HMC188MS8 / HMC188MS8E is suitable for: Conversion Loss: 15 dB •Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 45 dB •LMDS, VSAT, and Point-to-Point Radios Input Drive Level: 10 to 20 dBm T E •UNII & HiperLAN M S •Test Equipment - T E V I S E Functional Diagram General Description S A The HMC188MS8 & HMC188MS8E are miniature P frequLency doublers in plastic 8-lead MSOP packages. - The suppression of undesired fundamental and higher S order harmonics is 45 dB typical with respect to input R E O signal levels. The doubler uses the same diode/balun I technology used in Hittite MMIC mixers. The doubler L is ideal for high volume applications where frequency P I doubling of a lower frequency is more economical than T S directly generating a higher frequency. The passive L U Schottky diode doubler technology contributes no M measurable additive phase noise onto the multiplied . B signal. Q E R F O Electrical Specifi cations, T = +25° C, As a Function of Drive Level A Input = +10 dBm Input = +15 dBm Input = +20 dBm Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units Frequency Range, Input 1.75 - 2.75 1.5 - 2.5 1.25 - 3.0 GHz Frequency Range, Output 3.5 - 5.5 3.0 - 5.0 2.5 - 6.0 GHz Conversion Loss 19 22 15 18 16 19 dB FO Isolation 35 45 dB (with respect to input level) 3FO Isolation 43 50 dB (with respect to input level) 4FO Isolation 38 45 dB (with respect to input level) Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 7 - 16 rliicgehntss eo fi sth girrda nptaerdti ebsy t hima2tp 0mlica ayAt iorelnps uohlrt ofartoh meRr witosis uaes deu.n ,dS epCre cahinfieyc apltmiaotnessn tfs oourb rjpedactt,e tnoMt crhiAgahn tgs0 eo1 wf 8Aithn2oau4lot g n PoDtiehcveoic. eNnso.e : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Conversion Loss @ +15 dBm Drive Level Isolation @ +15 dBm Drive Level* 7 0 0 -40C -10 SS (dB) -10 B) --3200 Fo LO -20 N (d -40 E T ON +25C TIO -50 M RSI -30 +85C OLA -60 4Fo S E S V I -70 N T 3Fo - O -40 -80 C E -90 V -50 -100 0 1 2 3 4 5 6 7 8 0 E5 FREQU1E0NCY (GHz) 15 20 SI OUTPUT FREQUENCY (GHz) S *With respect to input level A P L - Input Return Loss vs. Drive Level Output Return Loss vs. Drive Level S 0 0 R INPUT RETURN LOSS (dB) ----2211-55050 InpuItn =p +ut1 =0 +dB20mI ndpBumt =B +15 dBm S O OUTPUT RETURN LOSS (dB) ----2211-55050 Input = +1II0nn ppduuBttm == ++2105 ddBBmm Q. MULTIPLIE 0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8 E INPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) R O Note: Output return loss measured at 2fo, with +10dBm, F +15 dBm, and +20 dBm drive levels on input of doubler. Conversion Loss vs. Drive Level Absolute Maximum Ratings Input Drive +27 dBm 0 Storage Temperature -65 to +150 °C Input = +20 dBm dB) -10 Operating Temperature -40 to +85 °C S ( ESD Sensitivity (HBM) Class 1A S LO -20 N O Input = +10 dBm SI -30 ELECTROSTATIC SENSITIVE DEVICE R E Input = +13 dBm OBSERVE HANDLING PRECAUTIONS V N Input = +15 dBm O -40 C -50 0 1 2 3 4 5 6 7 8 OUTPUT FREQUENCY (GHz) Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 7 - 17 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Outline Drawing 7 T E M S - T E V I S E S A P L - S NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY R 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. E 3O. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. I 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. L 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. P I T S L U M Package Information . Part Number PacBkage Body Material Lead Finish MSL Rating Package Marking [3] Q E HMC188MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H188 XXXX R F HMC188MS8E RoHOS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] XHX1X88X [1] Max peak refl ow temperature of 235 °C [2] Max peak refl ow temperature of 260 °C [3] 4-Digit lot number XXXX Pin Description Pin Number Function Description Interface Schematic 1, 3 - 6, 8 GND All ground leads must be soldered to PCB RF/DC ground. 2 RFIN Pin is DC coupled and matched to 50 Ohms from 1.25 to 3.0 GHz 7 RFOUT Pin is DC coupled and matched to 50 Ohms from 2.5 to 6.0 GHz Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 7 - 18 rliicgehntss eo fi sth girrda nptaerdti ebsy t hima2tp 0mlica ayAt iorelnps uohlrt ofartoh meRr witosis uaes deu.n ,dS epCre cahinfieyc apltmiaotnessn tfs oourb rjpedactt,e tnoMt crhiAgahn tgs0 eo1 wf 8Aithn2oau4lot g n PoDtiehcveoic. eNnso.e : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D

HMC188MS8 / 188MS8E v04.0709 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 1.25 - 3.0 GHz INPUT Evaluation PCB 7 E T M S T - E V I E S S A P L - S R O E I L P I T S L U M B . Q E R O F List of Materials for Evaluation PCB 103313 [1] The circuit board used in the fi nal application should Item Description be generated with proper RF circuit design tech- J1 - J3 PCB Mount SMA Connector niques. Signal lines should have 50 ohm imped- C1 1,000 pF Capacitor, 0603 Pkg. ance while the package ground leads and exposed HMC188MS8 / HMC188MS8E U1 x4 Active Multiplier paddle should be connected directly to the ground PCB [2] 104610 Eval Board plane similar to that shown. The evaluation circuit [1] Reference this number when ordering complete evaluation PCB board shown is available from Hittite upon request. [2] Circuit Board Material: Rogers 4350 Information furnisheFd obry Apnrailcoge D, edviceelsi vise breylie,v eadn tdo bteo a cpcluaractee a nod rrdelieabrlse., Hpowleevaers, eno coFnotra pcritc eH, idtteiltieve rMy, iacnrdo wtoa pvlaec eC oorrdperosr: aAtnioalnog: Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties tha2t 0ma yA relpsuhlt faro mR itos uasde. ,S pCechifiecaltmionss fsoubrjedct, toM chAan g0e1 w8ith2ou4t nPotihceo. Nnoe : P9h7o8n-e2: 75801--332394-437 0 0F (cid:127)a Ox:r d9e7r o8n-l2in5e 0at- w33w7w3.analog.com 7 - 19 license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their resOpercdtivee orw Onerns.-line at www.hAiptptilticea.tcioonm Support: Phone: 1-800-ANALOG-D