HIH-4010/4020/4021 Series Humidity Sensors DESCRIPTION The HIH-4010 is an uncovered integrated humidity sensor, the The HIH-40104020/4021 Series Humidity Sensors are HIH-4020 is a covered integrated circuit humidity sensor, and designed specifically for high volume OEM (Original Equipment the HIH-4021 is a covered, condensation-resistant, integrated Manufacturer) users. circuit humidity sensor. All three products are available in two lead space configurations. Direct input to a controller or other device is made possible by this sensor’s near linear voltage output. With a typical current The RH sensor is a laser trimmed, thermoset polymer draw of only 200 (cid:181)A, the HIH-4010/4020/4021 Series is often capacitive sensing element with on-chip integrated signal ideally suited for low drain, battery operated systems. conditioning. Tight sensor interchangeability reduces or eliminates OEM The sensing element's multilayer construction provides production calibration costs. Individual sensor calibration data excellent resistance to most application hazards such as is available. wetting, dust, dirt, oils and common environmental chemicals. Both products are available in two lead spacing configurations, The HIH-4010/4020/4021 Series delivers instrumentation- as well as with or without calibration and data printouts. quality RH (Relative Humidity) sensing performance in a competitively priced, solderable SIP (Single In-line Package). FEATURES POTENTIAL APPLICATIONS • Molded thermoset plastic housing • Refrigeration equipment • Near linear voltage output vs %RH • HVAC (Heating, Ventilation and Air Conditioning) • Laser trimmed interchangeability equipment • Low power design • Medical equipment • Enhanced accuracy • Drying • Fast response time • Metrology • Stable, low drift performance • Battery-powered systems • Chemically resistant • OEM assemblies

HIH-4010/4020/4021 Series TABLE 1. PERFORMANCE SPECIFICATIONS (At 5 Vdc supply and 25 ”C [77 ”F] unless otherwise noted.) Parameter Minimum Typical Maximum Unit Specific Note Interchangeability (first order curve) (cid:150) (cid:150) (cid:150) (cid:150) (cid:150) 0% RH to 59% RH -5 (cid:150) 5 % RH (cid:150) 60% RH to 100% RH -8 (cid:150) 8 % RH (cid:150) Accuracy (best fit straight line) -3.5 (cid:150) +3.5 % RH 1 Hysterisis (cid:150) 3 (cid:150) % RH (cid:150) Repeatability (cid:150) ±0.5 (cid:150) % RH (cid:150) Settling time (cid:150) (cid:150) 70 ms (cid:150) Response time (1/e in slow moving air) (cid:150) 5 (cid:150) s (cid:150) Stability (at 50 %RH in 1 year) (cid:150) ±1.2 (cid:150) % RH 2 Stability (at 50 %RH in 1 year) (cid:150) ±0.5 (cid:150) % RH 3 Voltage supply 4 (cid:150) 5.8 Vdc 4 Current supply (cid:150) 200 500 (cid:181)A (cid:150) Voltage output (1st order curve fit) V =(V )(0.0062(sensor RH) + 0.16), typical at 25 ”C OUT SUPPLY Temperature compensation True RH = (Sensor RH)/(1.0546 – 0.00216T), T in ”C Output voltage temp. coefficient at 50% RH, 5 V (cid:150) -4 (cid:150) mV/”C (cid:150) Operating temperature -40[-40] See Figure 1. 85[185] ”C[”F] (cid:150) Operating humidity (HIH-4010) 0 See Figure 1. 100 % RH 5 Operating humidity (HIH-4020) 0 See Figure 1. 100 % RH 5 Operating humidity (HIH-4021) 0 See Figure 1. 100 % RH (cid:150) Storage temperature -50[-58] (cid:150) 125[257] ”C[”F] (cid:150) Storage humidity See Figure 2. % RH 5 Specific Notes: General Notes: 1. For HIH-4010/20/21-003/004 catalog listings only. • Sensor is ratiometric to supply voltage. 2. Includes testing outside of recommended operating zone. • Extended exposure to >90% RH causes a reversible 3. Includes testing for recommended operating zone only. shift of 3% RH. 4. Device is calibrated at 5 Vdc and 25 ”C. • Sensor is light sensitive. For best performance, shield 5. Non-condensing environment. When liquid water falls on the sensor from bright light. humidity sensor die, output goes to a low rail condition indicating no humidity. FACTORY CALIBRATION DATA For HIH-4010-001/002/003/004 catalog listings only. HIH-4010/4020/4021 Sensors may be ordered with a calibration and data printout. See Table 2 and the order guide on the back page. TABLE 2. EXAMPLE DATA PRINTOUT Model HIH-4010-003 Channel 92 Wafer 030996M MRP 337313 For HIH-4020-001/002/003/004 and HIH-4021-001/002/003/ Calculated values at 5 V 004 catalog listings only. V at 0% RH 0.958 V OUT V at 75.3% RH 3.268 V OUT Linear output for 3.5% RH accuracy at 25 °C Zero offset 0.958 V Slope 30.680 mV/%RH Sensor RH (V - zero offset)/slope OUT (V - 0.958)/0.0307 OUT Ratiometric response for 0% RH to 100% RH VOUT VSUPPLY (0.1915 to 0.8130) 2 www.honeywell.com/sensing

Humidity Sensors FIGURE 1. OPERATING ENVIRONMENT (Non-condensing environment for HIH-4010 and HIH-4020 catalog listings only.) FIGURE 2. STORAGE ENVIRONMENT (Non-condensing environment for HIH-4010 and HIH-4020 catalog listings only.) y t di mi u H e v ti a el R Honeywell Sensing and Control 3

HIH-4010/4020/4021 Series FIGURE 3. TYPICAL OUTPUT VOLTAGE VS RELATIVE HUMIDITY (At 25 ”C and 5 V.) 4 3.5 3 c) d V ge ( 2.5 Sensor Response a olt Sensor Response V ut 2 Best Linear Fit p ut O 1.5 1 0.5 0 20 40 60 80 100 Relative Humidity (%RH) FIGURE 4. TYPICAL OUTPUT VOLTAGE (BFSL) VS RELATIVE HUMIDITY (At 0 ”C, 70 ”C and 5 V.) 4.5 4 3.5 3 c) d V e ( 2.5 ag 0 C olt 70 C V ut 2 p ut O 1.5 1 0.5 0 0 10 20 30 40 50 60 70 80 90 100 Relative Humidity (%) 4 www.honeywell.com/sensing

Humidity Sensors FIGURE 5. HIH-4010 MOUNTING DIMENSIONS (For reference only. mm/[in]) FIGURE 6. HIH-4020 MOUNTING DIMENSIONS (For reference only. mm/[in]) Honeywell Sensing and Control 5

HIH-4010/4020/4021 Series FIGURE 7. HIH-4021 MOUNTING DIMENSIONS (For reference only. mm/[in]) 6 www.honeywell.com/sensing

Humidity Sensors FIGURE 8. TYPICAL APPLICATION CIRCUIT ORDER GUIDE Catalog Description Listing HIH-4010-001 Integrated circuit humidity sensor, 2,45 mm [0.100 in] lead pitch SIP HIH-4010-002 Integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP HIH-4010-003 Integrated circuit humidity sensor, 2,45 mm [0.100 in] lead pitch SIP, calibration and data printout HIH-4010-004 Integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP, calibration and data printout HIH-4020-001 Covered integrated circuit humidity sensor, 2,45 mm [0.100 in] lead pitch SIP HIH-4020-002 Covered integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP HIH-4020-003 Covered integrated circuit humidity sensor, 2,45 mm [0.100 in] lead pitch SIP, calibration and data printout HIH-4020-004 Covered integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP, calibration and data printout HIH-4021-001 Covered, filtered integrated circuit humidity sensor, 2,45 mm [0.100 in]lead pitch SIP HIH-4021-002 Covered, filtered integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP HIH-4021-003 Covered, filtered integrated circuit humidity sensor, 2,45 mm [0.100 in] lead pitch SIP, calibration and data printout HIH-4021-004 Covered, filtered integrated circuit humidity sensor, 1.27 mm [0.050 in] lead pitch SIP, calibration and data printout FURTHER HUMIDITY SENSOR INFORMATION See the following associated literature at www.honeywell.com/sensing: • Product installation instructions • Application sheets: (cid:150) Humidity Sensor Performance Characteristics (cid:150) Humidity Sensor Theory and Behavior (cid:150) Humidity Sensor Moisture and Psychrometrics (cid:150) Thermoset Polymer-based Capacitive Sensors Honeywell Sensing and Control 7

WARNING WARNING MISUSE OF DOCUMENTATION PERSONAL INJURY • The information presented in this product sheet is for DO NOT USE these products as safety or emergency stop reference only. Do not use this document as a product devices or in any other application where failure of the installation guide. product could result in personal injury. • Complete installation, operation, and maintenance Failure to comply with these instructions could result information is provided in the instructions supplied with in death or serious injury. each product. Failure to comply with these instructions could result SALES AND SERVICE in death or serious injury. Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For WARRANTY/REMEDY application assistance, current specifications, pricing or name Honeywell warrants goods of its manufacture as being free of of the nearest Authorized Distributor, contact your local sales defective materials and faulty workmanship. Honeywell’s office or: standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order E-mail: info.sc@honeywell.com acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell Internet: www.honeywell.com/sensing during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The Phone and Fax: foregoing is buyer’s sole remedy and is in lieu of all other Asia Pacific +65 6355-2828 warranties, expressed or implied, including those of +65 6445-3033 Fax merchantability and fitness for a particular purpose. In no Europe +44 (0) 1698 481481 event shall Honeywell be liable for consequential, special, +44 (0) 1698 481676 Fax or indirect damages. Latin America +1-305-805-8188 +1-305-883-8257 Fax While we provide application assistance personally, through USA/Canada +1-800-537-6945 our literature and the Honeywell web site, it is up to the +1-815-235-6847 customer to determine the suitability of the product in the +1-815-235-6545 Fax application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 009020-1-EN IL50 GLO Printed in USA January 2007 www.honeywell.com/sensing © 2007 Honeywell International Inc. All rights reserved.