The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Staggered Connector Directly Mounted on Board HIF2C Series ■ Features 1. Directly Mounted on Board This connector can be directly mounted on the board using 1.27mm pitch flat cable. 2. Variation in Number of Contacts The number of contacts contains 10, 16, 20, 26, 30, 34, 40, 50, and 60 contacts. 3. Low Profile Type The connector height is lower than that of the HIF2E series. 4. Applicable Cable The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. :0.8 to 1.0mm). ■ Applications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. ■ Product Specifications Current rating: 1A Operating Temperature Range:–55 to +85ç(Note 1) Storage Temperature Range:–10 to +60ç(Note 2) Rating Voltage rating: 200V AC Operating Moisture Range:40 to 80% Storage Humidity Range:40 to 70%(Note 2) Item Specification Condition 1. Insulation Resistance 1000Mohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15mohms max. 0.1A 4. Vibration No electrical discontinuity of 1μs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Insulation resistance: 1000Mohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% (–65ç: 30 minutes ➝15 to 35ç: 5 minutes max. 6. Temperature Cycle No damage, cracks, or parts looseness. 125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles 7. Resistance to Solder Bath: 260ç for 10 seconds No deformation of components affecting performance. Soldering heat Manual soldering: 360ç for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. ■ Material Part Material Finish Remarks Insulator PBT Black UL94V-0 Contact Beryllium copper Contact area Gold plated over nickel underplated --------------- ■ Ordering Information HIF2C - * DT - 1.27 R 1 2 3 4 5 1 Series Name: HIF 2C 4 Contact Pitch: 1.27mm 2 Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60 5 Connection type : R : ribbon cable 3 Contact alignment: DT : staggered B65

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS pIFro2duCc tsS eharviee bse●enS dtisacgongtienureedd, o rC woilln bne edicsctoonrti nDueidr esocotnl.y P leMasoeu chnetcek dth eo npr oBduocatsr sdtatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Part Number CL No. Number of Contacts A B RoHS HIF2C-10DT-1.27R(01) 561-0075-0-01 10 17.8 11.43 HIF2C-16DT-1.27R(01) 561-0077-6-01 16 25.4 19.05 HIF2C-20DT-1.27R(01) 561-0079-1-01 20 30.5 24.13 HIF2C-26DT-1.27R(01) 561-0081-3-01 26 38.1 31.75 HIF2C-30DT-1.27R(01) 561-0083-9-01 30 43.2 36.83 YES HIF2C-34DT-1.27R(01) 561-0085-4-01 34 48.3 41.91 HIF2C-40DT-1.27R(01) 561-0087-0-01 40 55.9 49.53 HIF2C-50DT-1.27R(01) 561-0089-5-01 50 68.6 62.23 HIF2C-60DT-1.27R(01) 561-0091-7-01 60 81.3 74.93 B66

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the HirosHe IwFeb2sCite SRoeHrSi esesa●rcSh atat wgwgwe.hrireodse -Ccoonnnencteocrst.coorm D, oirr ceocnttalcyt yMouor u Hnirtoesed s aolens rBeporaesredntative. BPCB mounting pattern 10 contacts 16 contacts 20 contacts 26 contacts 30 contacts B67

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHHS pIFro2duCc tsS eharviee bse●enS dtisacgongtienureedd, o rC woilln bne edicsctoonrti nDueidr esocotnl.y P leMasoeu chnetcek dth eo npr oBduocatsr sdtatus on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPCB mounting pattern 34 contacts 40 contacts 50 contacts 60 contacts B68