8 7 6 5 4 3 2 1 NOTES 3MTM ROUND CONDUCTOR FLAT CABLE, HF625 SERIES 1. REGULATORY INFORMATION: * LOW SMOKE ZERO HALOGEN (LSZH). INSULATION 1MM, 28 AWG STRANDED, HALOGEN FREE PO ADVANTAGES OF LSZH INSULATION ARE THE LOW VISIT 3M.com/regs OR CONTACT SMOKE (IEC 61034-2-2005) AND LOW TOXICITY YOUR 3M REPRESENTATIVE TO FIND OF COMBUSTION GASES (NF X 70-100-2:2006), THE RoHS COMPLIANCE STATUS OF REDUCING THE RISK TO FIREFIGHTERS AND THE 3M PART YOU ARE INTERESTED DIM. "A" REDUCING THE SOOT AND CORROSION DAMAGE TO IN. NEARBY EQUIPMENT. 2 IN THE EVENT OF CONFLICT DIM. "B" * 28 AWG STRANDED CONUCTORS ON 1MM PITCH PERMITS BETWEEN THIS DATA AND THAT MASS TERMINATIONS TO A BROAD LINE OF METRIC IDC CONTAINED IN THE PRODUCT D CONNECTORS. SPECIFICATION, THE PRODUCT D SPECIFICATION TAKES PRECEDENT. * ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATIONS. 3 BLUE MARKING ON ONE EDGE OF .89 .08 PRIMARY CABLE DESIGNATES WIRE #1. [.035] SEE NOTE 3 .50 .15 HALOGEN FREE (PO) INSULATION [.020] 1.00 .05 [.039] TYP. 28 AWG 7 X 36 (7 X .127) TINNED STRANDED COPPER CONDUCTORS TABLE 1 NUMBER OF 3M PART DIMENSION A DIMENSION B CONDUCTORS NUMBER 06 HF625/06 6.00 .20 [.236] 5.00 .18 [.197] C 08 HF625/08 8.00 .20 [.315] 7.00 .18 [.276] C PHYSICAL: 10 HF625/10 10.00 .20 [.394] 9.00 .18 [.354] 2 12 HF625/12 12.00 .20 [.472] 11.00 .18 [.433] INSULATION MATERIAL: HALOGEN FREE POLYOLEFIN (PO) 14 HF625/14 14.00 .20 [.551] 13.00 .18 [.512] COLOR: DARK GRAY 16 HF625/16 16.00 .22 [.630] 15.00 .20 [.591] MARKING: 18 HF625/18 18.00 .22 [.709] 17.00 .20 [.669] STANDARD: NONE 20 HF625/20 20.00 .22 [.787] 19.00 .20 [.748] CONDUCTORS: 28 AWG, 7 X 36 AWG [7 X .127] TINNED STRANDED COPPER 22 HF625/22 22.00 .22 [.866] 21.00 .20 [.827] 24 HF625/24 24.00 .22 [.945] 23.00 .20 [.906] ELECTRICAL: 26 HF625/26 26.00 .22 [1.024] 25.00 .20 [.984] 2 N O DSI 28 HF625/28 28.00 .22 [1.102] 27.00 .20 [1.063] EVI VOLTAGE RATING: USA 300V CANADIAN 150V EU: <50V R 30 HF625/30 30.00 .25 [1.181] 29.00 .23 [1.142] INSULATION RESISTANCE: >1 X 1010 /3m [10 FT.] 1 - 32 HF625/32 32.00 .25 [1.260] 31.00 .23 [1.220] 8 UNBALANCED BALANCED 3 34 HF625/34 34.00 .25 [1.339] 33.00 .23 [1.299] CHARACTERISTIC IMPEDANCE: 85 3 144 2 - 36 HF625/36 36.00 .25 [1.417] 35.00 .23 [1.378] CAPACITANCE: 60.5 pF/ft [18.44 pF/m] 33.8 pF/ft [10.29 pF/m] 0R 0BE 38 HF625/38 38.00 .25 [1.496] 37.00 .23 [1.457] INDUCTANCE: .43 H/ft [.13 H/m] .69 H/ft [.21 H/m] 1UM PROPAGATION DELAY: 5.15 ns/ft [1.57 ns/m] 4.86 ns/ft [1.48 ns/m] -5NG N 40 HF625/40 40.00 .25 [1.575] 39.00 .23 [1.535] 8WI VELOCITY OF PROPAGATION: 65% 69% 7RA D 42 HF625/42 42.00 .25 [1.654] 41.00 .23 [1.614] NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. 44 HF625/44 44.00 .25 [1.732] 43.00 .23 [1.693] B BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. B 46 HF625/46 46.00 .25 [1.811] 45.00 .23 [1.772] 48 HF625/48 48.00 .25 [1.890] 47.00 .23 [1.850] ENVIRONMENTAL: 50 HF625/50 50.00 .25 [1.969] 49.00 .23 [1.929] 2 TEMPERATURE RATING: -40 C TO +105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) 6 -10 C TO +90 C (UL TEMPERATUE RATING) ) s r FLAMMABILITY RATING: UL: HORIZONTAL h ( t ORDERING INFORMATION e s f HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE f O HF625/XX XX PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT C ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL T BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR U - NUMBER OF CONDUCTORS BLANK = STANDARD PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 - (SEE TABLE 1) SF = SPLICE FREE STANDARDS. THIS INFORMATION REPRESENTS 3M'S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE 8 OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. 1 0 NOTE: 2 / AVAILABLE IN STANDARD 30M AND 100M ROLLS. 2 1 PLEASE SPECIFY WHEN ORDEING. CONTACT 3M D 79845 JUL 17,2018 JNC BM / 1 FOR AVAILABILITY OF ADDITIONAL CONDUCTOR 1 REVISED & REDRAWN COUNTS AND/OR CUSTOM ROLL LENGTHS. e DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m ACCOCDEESSS DCRAFTSTIGLIONE DJAUTEL 17,2018 MFG DATE Ti A CHKD DATE APPVL DATE Ad B. MIZE JUL 17,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING INCHES TITLE l a 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION R .0 HF625 ROUND CONDUCTOR r MM [INCH] .00 t INTERCONNECT SOLUTIONS .000 FLAT CABLE, 1MM, n TOLERANCE - UNLESS NOTED e http://www.3Mconnectors.com THIRD ANGLE PROJECTION .0000 C 28AWG STRANDED .X .XX .XXX INTERPRET PER MILLIMETERS : 3M IS A TRADEMARK OF 3M COMPANY. UL FILE NO: E42769 MM .3 .13 XXX ASME Y14.5 - 2009 0 ed .0 FOR TECHNICAL, SALES OR ORDERING STYLE NO: 22089 [] = DIM. FOR REFERENCE ONLY MAX SURFACE ROUGHNESS .00 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2338-1 RDEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF625 DLIESTT.S YES NO SHT 1 OF 2 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM ROUND CONDUCTOR FLAT CABLE, HF625 SERIES 1MM, 28 AWG STRANDED, HALOGEN FREE PO D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control C C can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. N O DSI If the 3M product does not conform to this warranty, then the sole and exclusive VI E R remedy is, at 3M's option, replacement of the 3M product or refund of the purchase price. 1 - 8 3 Limitation of Liability: Except where prohibited by law, 3M will not be liable for 3 2 any loss or damage arising from the 3M product, whether direct, indirect, special, - 0R incidental or consequential, regardless of the legal theory asserted, including 0BE M warranty, contract, negligence or strict liability. 51G NU -N 8WI A 7R D 3M Electronics Materials Solutions Division 6801 River Place Blvd. B B Austin, TX 78726-9000 1-800-225-5373 www.3M.com/interconnect 6 ) s r h ( t e s f f O C T U - - 8 1 0 2 / 2 1 D 79845 JUL 17,2018 JNC BM / 1 1 REVISED & REDRAWN e DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m ACCOCDEESSS DCRAFTSTIGLIONE DJAUTEL 17,2018 MFG DATE Ti A CHKD DATE APPVL DATE Ad B. MIZE JUL 17,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING INCHES TITLE l a .0 HF625 ROUND CONDUCTOR r .00 t n .000 FLAT CABLE, 1MM, e THIRD ANGLE PROJECTION .0000 C 28AWG STRANDED INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d e .0 MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 NUMBER 78-5100-2338-1 D a ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF625 DLIESTT.S YES NO SHT 2 OF 2 I 8 7 6 5 4 3 2 1