8 7 6 5 4 3 2 1 NOTES 3MTM ROUND CONDUCTOR FLAT CABLE, HF365 SERIES 1. REGULATORY INFORMATION: * LOW SMOKE ZERO HALOGEN (LSZH) INSULATION. ADVANTAGES .050" 28 AWG STRANDED, HALOGEN FREE PO VISIT 3M.com/regs OR CONTACT OF LSZH INSULATION ARE THE LOW SMOKE (IEC 61034-2-2005) YOUR 3M REPRESENTATIVE TO FIND AND LOW TOXICITY OF COMBUSTION GASES (NF X 70-100-2-2006), THE RoHS COMPLIANCE STATUS OF REDUCING THE RISK TO FIREFIGHTERS AND REDUCING THE SOOT THE 3M PART YOU ARE INTERESTED AND CORROSION DAMAGE TO NEARBY EQUIPMENT. IN. * 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS TERMINATION 2 IN THE EVENT OF CONFLICT TO BROAD LINE OF IDC CONNECTORS. BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT DIM. "A" * ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. D SPECIFICATION, THE PRODUCT D SPECIFICATION TAKES PRECEDENT. DIM. "B" TABLE 1 NUMBER OF 3M PART DIM. "A" DIM. "B" CONDUCTORS NUMBER .025 .007 .050 .002 0.64 0.18 1.27 0.05 04 HF365/04 .200+/-.010 [5.08] .150+/-.007 [3.81] 06 HF365/06 .300+/-.010 [7.62] .250+/-.007 [6.35] TYP. 08 HF365/08 .400+/-.010 [10.16] .350+/-.007 [8.89] 09 HF365/09 .450+/-.010 [11.43] .400+/-.007 [10.16] 10 HF365/10 .500+/-.010 [12.70] .450+/-.007 [11.43] 11 HF365/11 .550+/-.010 [13.97] .500+/-.007 [12.70] 12 HF365/12 .600+/-.010 [15.24] .550+/-.007 [13.97] 14 HF365/14 .700+/-.010 [17.78] .650+/-.007 [16.51] .035 .003 15 HF365/15 .750+/-.010 [19.05] .700+/-.007 [17.78] HALOGEN FREE PO 28 AWG 7 X 36 (7 X .127) TINNED 0.89 0.08 16 HF365/16 .800+/-.015 [20.32] .750+/-.011 [19.05] STRANDED COPPER CONDUCTORS 18 HF365/18 .900+/-.015 [22.88] .850+/-.011 [21.59] C 20 HF365/20 1.000+/-.015 [25.40] .950+/-.011 [24.13] C 24 HF365/24 1.200+/-.015 [30.48] 1.150+/-.011 [29.21] NOTE: 25 HF365/25 1.250+/-.015 [31.75] 1.200+/-.011 [30.48] BLUE MARKING ON ONE EDGE OF CABLE DESIGNATES WIRE #1. 26 HF365/26 1.300+/-.015 [33.02] 1.250+/-.011 [31.75] 30 HF365/30 1.500+/-.020 [38.10] 1.450+/-.015 [36.83] 34 HF365/34 1.700+/-.020 [43.18] 1.650+/-.015 [41.91] 36 HF365/36 1.800+/-.020 [45.72] 1.750+/-.015 [44.45] 37 HF365/37 1.850+/-.020 [46.99] 1.800+/-.015 [45.72] PHYSICAL: 2 40 HF365/40 2.000+/-.020 [50.80] 1.950+/-.015 [49.53] JACKET MATERIAL: HALOGEN FREE POLYOLEFIN (PO) 44 HF365/44 2.200+/-.020 [55.88] 2.150+/-.015 [54.61] N O COLOR: DARK GRAY 50 HF365/50 2.500+/-.020 [63.50] 2.450+/-.015 [62.23] CVISI E R 60 HF365/60 3.000+/-.020 [76.20] 2.950+/-.015 [74.93] MARKING: 0 STANDARD: NONE 64 HF365/64 3.200+/-.020 [81.28] 3.150+/-.015 [80.01] - 4 CONDUCTORS: 28 AWG 7 X 36AWG [7 X .127] TINNED STRANDED COPPER 3 3 2 - 0R 0BE M ELECTRICAL: 1U 2 5G N -N 8WI A VOLTAGE RATING: USA 300V CANADIAN 150V EU: <50V 7DR INSULATION RESISTANCE: >1 X 1010 /10ft. [3m] ORDERING INFORMATION B UNBALANCED B BALANCED CHARACTERISTIC IMPEDANCE: 100 168 HF365/XX XX CAPACITANCE: 15.0 pF/ft [49.2 pF/m] 8.4 pF/ft [27.7 pF/m] INDUCTANCE: .15 H/ft [.49 H/m] .24 H/ft [.79 H/m] BLANK= STANDARD PROPAGATION DELAY: 1.51 ns/ft [4.95 ns/m] 1.42 ns/ft [4.66 ns/m] SF= SPLICE FREE VELOCITY OF PROPAGATION: 68% 72% 6 No. OF CONDUCTORS: ) NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. s (SEE TABLE 1) r BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. h NOTE: ( AVAILABLE IN STANDARD 100FT OR 300FT ROLLS. t e ENVIRONMENTAL: PLEASE SPECIFY WHEN ORDERING. s 2 f CONTACT 3M FOR AVAILABILITY OF ADDITIONAL f O TEMPERATURE RATING: -40 C TO 105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) CONDUCTOR COUNTS AND/OR CUSTOM ROLL LENGTHS. C -10 C TO +105 C (UL TEMPERATUE RATING) T U - FLAMMABILITY RATING: UL: HORIZONTAL - 8 1 0 HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE 2 / PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT 5 ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL C 79052 MAY 25,2018 JNC BM 2 / 5 BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR REVISED AND REDRAWN e PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m STANDARDS. THIS INFORMATION REPRESENTS 3M'S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE ACCOCDEESSS DCRAFTSTIGLIONE DMAATEY 25,2018 MFG DATE Ti A OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. CHKD DATE APPVL DATE Ad B. MIZE MAY 25,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE 25 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING 1 INCH [MM] INCHES TITLE al 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 ROUND CONDUCTOR FLAT r TOLERANCE - UNLESS NOTED .00 t INTERCONNECT SOLUTIONS R .000 CABLE, .050", 28AWG n .X .XX .XXX e http://www.3Mconnectors.com THIRD ANGLE PROJECTION .0000 C STRANDED, HAL-FREE INCH .1 .01 .005 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3M IS A TRADEMARK OF 3M COMPANY. UL FILE NO: E42769 [MM] 2 .3 .13 .0 e FOR TECHNICAL, SALES OR ORDERING STYLE NO: 21682 [] = DIM. FOR REFERENCE ONLY MAX SURFACE ROUGHNESS .00 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2334-0 RCEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF365 DLIESTT.S YES NO SHT 1 OF 2 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that C 3M believes are reliable, but the accuracy or completeness of such information C is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at N O the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, CSI VI EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR RE CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED 0 WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. - 4 If the 3M product does not conform to this warranty, then the sole and exclusive 3 3 remedy is, at 3M's option, replacement of the 3M product or refund of the purchase 2 - price. 0R 0BE M 1U Limitation of Liability: Except where prohibited by law, 3M will not be liable for 5G N -N 8WI any loss or damage arising from the 3M product, whether direct, indirect, special, 7RA D incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B B 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3M.com/interconnect 6 ) s r h ( t e s f f O C T U - - 8 1 0 2 / 5 C 79052 MAY 25,2018 JNC BM 2 / 5 REVISED AND REDRAWN e DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD m ACCOCDEESSS DCRAFTSTIGLIONE DMAATEY 25,2018 MFG DATE Ti A CHKD DATE APPVL DATE Ad B. MIZE MAY 25,2018 r a DIVISION DIVISION CODE C 3M COPYRIGHT 2018 d EMSD 3M Center This document and the information it contains are n DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er a SCALE 1 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. t NOTED All rights reserved. S DRAWING 1 INCHES TITLE l a .0 ROUND CONDUCTOR FLAT r .00 t n .000 CABLE, .050", 28AWG e THIRD ANGLE PROJECTION .0000 C STRANDED, HAL-FREE INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d e .0 MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 NUMBER 78-5100-2334-0 C a ALL SURFACES .000 m MARKED ONLY ANGLES MODELHF365 DLIESTT.S YES NO SHT 2 OF 2 I 8 7 6 5 4 3 2 1