HCF4069U Hex inverter Datasheet - production data • ESD performance – HBM: 1 kV – MM: 200 V – CDM: 1 kV Applications SO14 • Automotive • Industrial • Computer • Consumer Features Description • Medium-speed operation t = 30 ns (typ.) at 10 V PD The HCF4069U is a monolithic integrated circuit • Standardized symmetrical output fabricated in metal oxide semiconductor characteristics technology available in the SO14 package. The • Quiescent current specified up to 20 V HCF4069U consists of six COS/MOS inverter circuits. This device is intended for all general • 5 V, 10 V, and 15 V parametric ratings purpose inverter applications where the medium • Input leakage current II = 100 nA (max.) at power TTL-drive and logic level conversion VDD = 18 V and TA = 25 °C capabilities of circuits such as HCF4049 hex • 100 % tested for quiescent current inverter/buffers are not required. Table 1. Device summary table Order code Temperature range Package Packing Marking HCF4069UM013TR -55 ° C to +125 ° C SO14 HCF4069U Tape and reel SO14 HCF4069YUM013TR (1) -40 ° C to +125 ° C HCF4069Y (automotive grade)(1) 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q002 or equivalent. January 2014 DocID2060 Rev 6 1/11 This is information on a product in full production. www.st.com

Contents HCF4069U Contents 1 Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.1 SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 DocID2060 Rev 6

HCF4069U Pin information 1 Pin information Figure 1. Pin connections (top view) (cid:36) (cid:20) (cid:20)(cid:23) (cid:57)(cid:39)(cid:39) (cid:42)(cid:3)(cid:32)(cid:3)(cid:36) (cid:21) (cid:20)(cid:22) (cid:41) (cid:37) (cid:22) (cid:20)(cid:21) (cid:47)(cid:3)(cid:32)(cid:3)(cid:41) (cid:43)(cid:3)(cid:32)(cid:3)(cid:37) (cid:23) (cid:20)(cid:20) (cid:40) (cid:38) (cid:24) (cid:20)(cid:19) (cid:46)(cid:3)(cid:32)(cid:3)(cid:40) (cid:44)(cid:3)(cid:32)(cid:3)(cid:38) (cid:25) (cid:28) (cid:39) (cid:57)(cid:54)(cid:54) (cid:26) (cid:27) (cid:45)(cid:3)(cid:32)(cid:3)(cid:39) (cid:42)(cid:36)(cid:48)(cid:54)(cid:20)(cid:22)(cid:19)(cid:21)(cid:20)(cid:22)(cid:20)(cid:23)(cid:23)(cid:23)(cid:38)(cid:37) Table 2. Pin description Pin no Symbol Name and function 1, 3, 5, 9, 11, 13 A, B, C, D, E, F Data inputs 2, 4, 6, 8, 10, 12 G, H, I, J, K, L Data outputs 7 V Negative supply voltage SS 14 V Positive supply voltage DD DocID2060 Rev 6 3/11 11

Functional description HCF4069U 2 Functional description Table 3. Truth table Inputs Outputs A, B, C, D, E, F G, H, I, J, K, L L H H L Figure 2. Input equivalent circuit (cid:57)(cid:39)(cid:39) (cid:44)(cid:49)(cid:51)(cid:56)(cid:55) (cid:57) (cid:54)(cid:54) (cid:42)(cid:36)(cid:48)(cid:54)(cid:21)(cid:23)(cid:19)(cid:20)(cid:20)(cid:22)(cid:20)(cid:20)(cid:20)(cid:22)(cid:38)(cid:37) 4/11 DocID2060 Rev 6

HCF4069U Electrical characteristics 3 Electrical characteristics Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to V pin voltage. SS Table 4. Absolute maximum ratings (AMR) Symbol Parameter Value Unit V Supply voltage -0.5 to +22 DD V V DC input voltage -0.5 to V + 0.5 I DD I DC input current ±10 mA I Power dissipation per package 200 P mW D Power dissipation per output transistor 100 T Operating temperature -55 to +125 op °C T Storage temperature -65 to +150 stg Table 5. Recommended operating conditions Symbol Parameter Value Unit V Supply voltage 3 to 20 DD V V Input voltage 0 to V I DD T Operating temperature -55 to 125 °C op DocID2060 Rev 6 5/11 11

Electrical characteristics HCF4069U Table 6. DC specifications(1) Test condition Value Sym. Parameter T = 25 °C -40 to 85 °C -55 to 125 °C Unit A V (V) V (V) |I | (μA) V (V) I O O DD Min. Typ. Max. Min. Max. Min. Max. 0/5 5 0.25 7.5 7.5 Quiescent 0/10 10 0.01 0.5 15 15 I μA L current 0/15 15 1 30 30 0/20 20 0.02 5 150 150 0/5 5 4.95 4.95 4.95 High level V output 0/10 <1 10 9.95 9.95 9.95 OH voltage 0/15 15 14.95 14.95 14.95 5/0 5 Low level V output 10/0 <1 10 0.05 0.05 0.05 OL voltage 15/0 15 V 0.5/4.5 5 4 4 4 High level V input 1/9 <1 10 8 8 8 IH voltage 1.5/13.5 15 12.5 12.5 12.5 4.5/0.5 5 1 1 1 Low level V input 9/1 <1 10 2 2 2 IL voltage 13.5/1.5 15 2.5 2.5 2.5 2.5 -1.36 -3.2 -1.15 -1.1 0/5 5 Output 4.6 -0.44 -1 -0.36 -0.36 I drive <1 OH current 0/10 9.5 10 -1.1 -2.6 -0.9 -0.9 0/15 13.5 15 -3.0 -6.8 -2.4 -2.4 mA 0/5 0.4 5 0.44 1 0.36 0.36 Output sink I 0/10 0.5 <1 10 1.1 2.6 0.9 0.9 OL current 0/15 1.5 15 3.0 6.8 2.4 2.4 Input I leakage 0/18 Any input 18 ±10-5 ±0.1 ±1 ±1 μA I current Input C Any input 5 7.5 pF I capacitance 1. The noise margin for both level "1" and "0" is: 1 V min. with V = 5 V, 2 V min. with V = 10 V, and 2.5 V min. with DD DD V = 15 V. DD 6/11 DocID2060 Rev 6

HCF4069U Electrical characteristics Table 7. Dynamic electrical characteristics (T = 25 °C, C = 50 pF, R = 200 kΩ, t = t = 20 ns) amb L L r f Test condition Value(1) Symbol Parameter Unit V (V) Typ. Max. DD 5 55 110 t , t Propagation delay time 10 30 60 PLH PHL 15 25 50 ns 5 100 200 t , t Output transition time 10 50 100 TLH THL 15 40 80 1. The typical temperature coefficient for all V values is 0.3 %/°C. DD Figure 3. Test circuit (cid:57) (cid:39)(cid:39) (cid:51)(cid:88)(cid:79)(cid:86)(cid:72)(cid:3)(cid:74)(cid:72)(cid:81)(cid:72)(cid:85)(cid:68)(cid:87)(cid:82)(cid:85) (cid:39)(cid:56)(cid:55) (cid:53)(cid:55) (cid:57)(cid:54)(cid:54) (cid:38)(cid:47) (cid:53)(cid:47) (cid:42)(cid:36)(cid:48)(cid:54)(cid:19)(cid:23)(cid:19)(cid:21)(cid:20)(cid:22)(cid:20)(cid:25)(cid:21)(cid:25)(cid:38)(cid:37) 1. Legend: C = 50 pF or equivalent (includes jig and probe capacitance), R = 200 KΩ, R = Z of pulse L L T OUT generator (typically 50 Ω) Figure 4. Propagation delay time waveform (f = 1 MHz; 50 % duty cycle) (cid:21)(cid:19)(cid:3)(cid:81)(cid:86) (cid:21)(cid:19)(cid:3)(cid:81)(cid:86) (cid:57) (cid:28)(cid:19)(cid:3)(cid:8) (cid:39)(cid:39) (cid:44)(cid:49)(cid:3) (cid:24)(cid:19)(cid:3)(cid:8) (cid:24)(cid:19)(cid:3)(cid:8) (cid:20)(cid:19)(cid:3)(cid:8) (cid:57) (cid:54)(cid:54) (cid:50)(cid:56)(cid:55)(cid:3) (cid:87) (cid:87) (cid:51)(cid:43)(cid:47) (cid:51)(cid:47)(cid:43) (cid:57) (cid:28)(cid:19)(cid:3)(cid:8) (cid:28)(cid:19)(cid:3)(cid:8) (cid:50)(cid:43) (cid:24)(cid:19)(cid:3)(cid:8) (cid:24)(cid:19)(cid:3)(cid:8) (cid:20)(cid:19)(cid:3)(cid:8) (cid:20)(cid:19)(cid:3)(cid:8) (cid:57) (cid:50)(cid:47) (cid:87) (cid:87) (cid:55)(cid:43)(cid:47) (cid:55)(cid:47)(cid:43) (cid:42)(cid:36)(cid:48)(cid:54)(cid:20)(cid:22)(cid:19)(cid:21)(cid:20)(cid:22)(cid:20)(cid:25)(cid:20)(cid:25)(cid:38)(cid:37) DocID2060 Rev 6 7/11 11

Package information HCF4069U 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 8/11 DocID2060 Rev 6

HCF4069U Package information 4.1 SO14 package information Figure 5. SO14 package mechanical drawing (cid:47) (cid:42) (cid:38) (cid:70)(cid:20) (cid:68)(cid:21) (cid:36) (cid:69) (cid:72) (cid:68)(cid:20) (cid:69)(cid:20) (cid:54) (cid:72)(cid:22) (cid:40) (cid:39) (cid:48) (cid:20)(cid:23) (cid:27) (cid:41) (cid:20) (cid:26) (cid:42)(cid:36)(cid:48)(cid:54)(cid:19)(cid:24)(cid:19)(cid:21)(cid:20)(cid:22)(cid:20)(cid:19)(cid:21)(cid:26)(cid:38)(cid:37) Table 8. SO14 package mechanical data Dimensions Ref Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 1.75 0.068 a1 0.1 0.2 0.003 0.007 a2 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45 ° 45 ° D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M 0.68 0.026 S 8 ° 8 ° DocID2060 Rev 6 9/11 11

Ordering information HCF4069U 5 Ordering information Table 9. Order codes Order code Temp. range Package Packing Marking HCF4069UM013TR -55 ° C to +125 ° C SO14 HCF4069U Tape and HCF4069YUM013TR (1) -40 ° C to +125 ° C SO14 reel HCF4069Y (automotive grade)(1) 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q002 or equivalent. 6 Revision history Table 10. Document revision history Date Revision Changes Document template and layout updated Removed “B” from part number. Updated package names (PDIP-14 and SO14 instead of DIP-14 and 18-Feb-2013 4 SOP-14). Added Applications. Added Device summary table. Added Section 5: Ordering information. 22-Mar-2013 5 Updated Table 1: Device summary table and Table 9: Order codes. Removed PDIP-14 package Added ESD data to Features 10-Jan-2014 6 Table 1: Device summary table: updated footnote 1. Table 9: Order codes: updated footnote 1. 10/11 DocID2060 Rev 6

HCF4069U Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID2060 Rev 6 11/11 11