Digital Daily Time Switch H5F CSM_H5F_DS_E_3_3 Daily Time Control with Simple Operations P S E •Specify the operation days. (However, you can set only one pattern of operation days and specified days.) •Up to 12 ON/OFF operations (24 for pulse-output operation). •Special holidays can be handled easily with the holiday setting function. •Adjustments for sudden schedule changes can be made eas- ily using output override and automatic return operation. •The operation program can be checked easily with the pro- gram check function. •Enables pulse output operation and summer time setting. •Incorporates finger-safe terminals. •Conforms to UL, CSA, and CE marking. For the most recent information on models that have been certified for •Meets a variety of mounting requirements: flush mounting, safety standards, refer to your OMRON website. surface mounting, and DIN track mounting. Model Number Structure ■ Model Number Legend H5F-@B 1 2 1. Mounting method None: Flush mounting F: Surface mounting K: Surface mounting/track mounting 2. Language B: English Ordering Information ■ List of Models Wiring Mounting method Model Screw terminals Flush mounting H5F-B Surface mounting H5F-FB Surface mounting/track mounting H5F-KB ■ Accessories (Order Separately) Name Models Soft cover Y92A-48F1 Hard cover For H5F-B Y92A-48 For H5F-FB/-KB Y92A-48E (See note 1.) Flush Mounting Adapter (See note 2.) Y92F-30 Mounting Track 50 cm (l) × 7.3 mm (t) PFP-50N 1 m (l) × 7.3 mm (t) PFP-100N 1 m (l) × 16 mm (t) PFP-100N2 End Plate PFP-M Spacer PFP-S Note:1. Supplied with H5F-KB model. 2. Supplied with H5F-B (flush-mounting) model. 1

H5F Specifications ■ Ratings Rated supply voltage 100 to 240 VAC (50/60 Hz) Operating voltage range 85% to 110% of rated supply voltage Power consumption Approx. 2.4 VA at 264 VAC Control outputs Contact output: SPST-NO, 15 A at 250 VAC, resistive load, 10 A at 24 VDC, resistive load Minimum applied load: 100 mA at 5 VDC (failure level: P, reference value) NEMA A300 Pilot Duty, 1/3 HP at 120 VAC External connections Screw terminals (M3.5 screw) Terminal screw tightening torque 0.98 to 1.17 N · m ■ Characteristics Accuracy of operating time ±0.01% ±0.05 s max. (see note 1) Setting error Influence of voltage Influence of temperature Influence of EMS. (at EN61326-1) Time accuracy ±15 s per month (at 25°C) Memory protection Continuous use: 5 years min. (at 25°C); Power-interruption rate of 50%: 10 years min. (at 25°C) (see note 2) (lithium battery) Insulation resistance 100 MΩ min. (between current-carrying terminals and exposed non-current-carrying metal parts, between operating power supply circuit and control output circuit and between non-continuous contacts) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts and between operating power supply circuit and control output circuit) 1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts) Noise immunity 1.5 kV (between power terminals) Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise) Vibration resistance Destruction:10 to 55 Hz with 0.375-mm single amplitude, four cycles each in three directions (8 minutes per cycle) Malfunction:10 to 55 Hz with 0.25-mm single amplitude for 10 minutes each in three directions Shock resistance Destruction:300 m/s2 3 times each in 6 directions Malfunction:100 m/s2 3 times each in 6 directions Ambient temperature Operating:–10°C to 55°C (with no icing) Storage: –25°C to 65°C (with no icing) Ambient humidity Operating: 35% to 85% Life expectancy Mechanical (at 20°C): 100,000 operations min. Electrical (at 20°C): 50,000 operations min. (15 A, 250 VAC, resistive load) 50,000 operations min. (1 HP, 250 VAC, motor load) 50,000 operations min. (10 A, 250 VAC, inductive load (cosφ = 0.7)) 50,000 operations min. (100 W, 100 VAC, lamp load) 10,000 operations min. (300 W, 100 VAC, lamp load) Approved safety standards UL508/Listing, CSA C22.2 No. 14, conforms to EN61010-1 (Pollution degree 2/overvoltage category II) Conforms to VDE0106/P100 (finger protection). Conforms to Electrical Appliance and Material Safety Law (for Japan) EMC (EMI) EN61326-1 (See note 3.) Emission Enclosure: EN55011 Group 1 class A Emission AC mains: EN55011 Group 1 class A (EMS) EN61326-1 (See note 3.) Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2) 8 kV air discharge (level 3) Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz, 1.4 to 2 GHz) (level 3) Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2) Immunity Burst: EN61000-4-4: 2 kV power-line (level 3) 1 kV I/O signal-line (level 4) Immunity Surge: EN61000-4-5: 1 kV line to lines (power and output lines) (level 2); 2 kV line to ground (power and output lines) (level 3) Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage) Immunity Magnetic Power Field: EN61000-4-8: 30 A/m Case color Light gray (Munsell 5Y7/1) Weight H5F-B: approx. 115 g; H5F-KB: approx. 160 g; H5F-FB: approx. 130 g Note:1. The total error including the repeat accuracy, setting error, variation due to voltage change, and variation due to temperature change is ±0.01%±0.05 s max. ±0.01% also indicates an error in the time interval of a set time. 2. The total time when power is not being supplied. 3. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2) 2

H5F Connections ■ Terminal Arrangement Flush Mounting Models Surface Mounting Models Surface Mounting/Track Mounting Models H5F-B H5F-FB H5F-KB (Rear View) (Front View) (Front View) P10o0w etor s2o4u0r cVeAC SU H M5FOT I M TE SUW I T CWHE TH FR SA 3 00 PM POOWUETRPOWN PM 5 00 SU H 5MFOT IM ET SUW IT C WHE TH FR SA OOUNT TMR/P MODE h m/ P WD 3 00 AUTO CLR SELECT d WRITE PM OFF +1h HOLIDAY TEST POOWUETRPOWN PM 5 00 OOUNT TMR/P MODE h m/ P WD AUTO CLR SELECT d WRITE OFF +1h HOLIDAY TEST Load Power supply of load Load Power supply Power source of load 100 to 240 VAC Load Power supply Power source of load 100 to 240 VAC Note:1. The Time Switch uses M3.5 terminals. 2. The Time Switch output is no-voltage contact output. An external power supply is required to drive the load. 3. Applicable wire: 600-V vinyl-insulated wire (solid wire or twisted wire, copper), 14 to 24 AWG, 2 wires max. per terminal. 4. Applicable tightening torque: 0.98 to 1.17N·m. 5. Recommended fuse: T2A, 250 VAC, time delay, low breaking capacity. Operation ■ Operation Operation method Digital quartz Time range 24 h × 7 days (Operation days can be specified.) Operation 1.Daily operation (Multiple-day operation possible.) 2.Pulse-output operation (Pulse width can be set in units of 1 s from 1 to 59 s and in units of 1min from 1 to 60 min.) 3.Partial operation on specified day (One or some of the operations for certain days can also be executed on other days.) 4.Forced ON/OFF operation 5.Holiday operation 6.Output override and automatic return operation Display 1.Day, hours (12-hour (am/pm) or 24-hour clock), minutes (0:00 to 11:59 a.m./ 0:00 to 11:59 p.m., 0:00 to 23:59) 2.Digital display by LCD. Character height: 8 mm 3.Digital display of present time and time schedules for operation 4.Timing chart display of present time and time schedules for operation Other functions Program check function, summer time function Number of circuits 1 independent circuit Minimum setting unit 1 min Minimum set interval 1 min Number of operations that can be set 24 (see note) Note:Up to 12 ON/OFF operations are possible per day. (For pulse-output operation, the number is 24.) 3

H5F ■ Operation Functions Timer operation (ON/OFF operation) Controls the output according to preset of ON and OFF times •Minimum setting unit: 1 min (cid:129)Up to 12 ON/OFF operations are possible per day. ON time OFF time Pulse-output operation Output turns ON for a fixed period (pulse width) at the set time. (cid:129)Pulse width: 1 to 59 s, or 1 to 60min. (The same pulse width setting is used for all types of Pulse width output operation.) (cid:129)The pulse width can be set in units of 1 s or 1 min. ON time (cid:129)Up to 24 pulse-output operations are possible per day. Forced ON/OFF operation Forcibly turns ON/OFF the output by the output ON/OFF switch. Override and automatic return operation Using the output ON/OFF switch and the Write Key, control output is held in the ON state until the next OFF time. Regular program (cid:129)It is also possible to hold the control output in the OFF state until the next ON time. Output (cid:129)Operation after the output turns OFF (or ON) will be based on the regular program. operation (cid:129)This function can be used with pulse-output operation. Start of override and automatic return operation Partial operation on specified day The Time Switch operates according to only some of the programs on a user-specified day. (Convenient, for example, for executing a half-day operation on Saturday.) Program 1 Program 2 (special) (cid:129)It is not possible to set operation to be executed only on the specified day. Regular program (cid:129)Only one pattern of specified days can be set. Operation on (cid:129)This function can be used with pulse-output operation. operation day Operation on specified day Holiday setting It is possible to set a day in the present week as a holiday (i.e., a non-operation day: output OFF regardless of the settings). When that day has passed, operation will continue according Operation on Operation operation dayon holiday to the regular program, and operation will be executed as normal on that day from the follow- Regular ing week program (cid:129)This function can be used with pulse-output operation. Operation in present week Operation from next week Note:Both the timer operation and the pulse-output operation cannot be programmed together. ■ Operation When Power Turns OFF 1. The time and settings are backed up using a lithium battery. 2. The display stays ON but the output turns OFF. 3. Settings for all types of operation except override and automatic return operation are possible. 4

H5F Nomenclature Front Panel (Actual Size) H5FTIME SWITCH SU MO TU WE TH FR SA A Mode Key OUT POWER I TMR/ P Key B h Key OUT TMR/P MODE h m/ P WD ON C m/ P WD Key H Output ON/OFF AUTO CLR SELECT d WRITE Switch OFF D Write Key +1h HOLIDAY TEST E d/Test Key G CLR/+1h Key F Select/Holiday Key No. Name Function A Mode Key Switches between time adjustment mode, the operation setting modes, and run mode. B h (Hour) Key Sets hours or switches between 12-hour (am/pm) and 24-hour display. C m/ P WD (Minute/Pulse Time Width) Key Sets minutes or a pulse time width. D Write Key Writes the set data to memory or confirms settings with the program check function. E d/Test (Day Shift/Program Test) Key Moves the cursor to specify a day or starts the program check function. F Select/Holiday Key Specifies or cancels a specified day or switches to holiday setting mode. G CLR/+1h (Clear/Summer Time) Key Erases the set data and initializes the day of operation or sets/clears summer time. H Output ON/OFF switch ON: Turns on the output regardless of the setting. AUTO: Turns on/off the output according to the setting. OFF: Turns off the output regardless of the setting. Override and automatic return operation can be executed by using this key in combina- tion with the Write Key. I TMR/ P (Timer/Pulse output) Key Selects timer operation or pulse-output operation. Display Time Adjustment Mode Indicator Present Day Indicator Operation Day Indicator SU MO TU WE TH FR SA Lit: Operation day Not lit: Non-operation day Displays the Present Time, Flashing: Specified operation day Operation Time, and Time Width S Partial Operation on Specified Day Indicator AM s Output Indicator PM m Pulse Width Unit Indicator PLiot wwehre nIn cdoicnatrtool routput is ON. POWN P APMM +1Ph SLiut mwhmeenr sTeitm toe sInudmicmaetro trime. Lit when power is supplied Operation Setting Mode Indicator to the Time Switch. Next Operation Indicators Pulse Operation Indicator Run mode: Displays the direction (i.e., ON or Lit: Pulse-output operation OFF) and time of the next output Not lit: Timer operation operation. Operation time setting mode: Displays the program number for the setting. Holiday setting mode: Displays hday (hday) when the Time Switch is in holiday setting mode. Program check: Displays test (test) during program check. 5

H5F Dimensions Note:All units are in millimeters unless otherwise indicated. H5F-B (provided with Y92F-30 Flush Mounting Adapter) (Flush Mounting) Y92A-48 Hard Cover (sold separately) 63.7 Panel Cutout Dimensions 48 6 14 Terminal cover (provided) (according to DIN43700) SUH5MFOTTIMUE WSWEITCTHHFRSA 3 00 48 50.6 37.744.8 45+0.5 POOWUETRPPOWMN PM 5 00 AOOUOUFTNOFT TCM+RL1/RhPHSMOELOLIEDDCAETY TEdhST m/S P E TWD 84.8 Note: The Time Switch 45+0.5 88.7 uses M3.5 Note: Recommended panel thickness: 1 to 5 mm. terminals. H5F-FB (Surface Mounting) 49 Mounting Dimensions 50 42.1 1.5 5 SUH5MFOTITMUE SWWEITCTHHFRSA 3 00 50 POOWUETRPPOWMN PM 5 00 (50) AOOUOUFTNOFT1TCM+RL1/RhPH2SOM12E5L0.0OL40I/DVE6 DtA0AoCEH Y 2mTz4a0xV.ATCE3dShT m4/S P11R E 50 EWTAASD.22540VVADCC 92 76 (92) Y92A-48E Hard Cover (sold separately) M4 tapping screws provided. 31 Approximate pilot hole dimensions: T(perromviindaeld c)over Note: uTshees T Mim3e.5 S witch Panel thickness of 0.8 to 1.2 mm: 3.6-mm dia. terminals. Panel thickness of 1.6 to 4.0 mm: 3.7-mm dia. Wiring cutout sections: Cut out as required for wiring. H5F-KB (Surface/Track Mounting) Mounting Hole Cutout Dimensions 73 25 50 42 Y92A-48E Hard Cover (provided) SUHM5FOTTIMUE WSWEITCTHHFRSA (101.2) 117.4 3 00 POOWUETRPPOWMN PM 5 00 101.2 68 50 35.3 90 104 to 106 AOOUOUFTNOFT TCM+RL1/RhPHSOMELOLIDEDACEYTTEdShT m/S P E WTD (50.5) 1 22.4VA max.3 4RES. 50.5 43.1 60 Terminal cover (provided) M4 tapping screws provided. Approximate pilot hole dimensions: Panel thickness of 0.8 to 1.2 mm: 3.6-mm dia. Panel thickness of 1.6 to 4.0 mm: 3.7-mm dia. 6

H5F ■ Accessories (Order Separately) Note:Depending on the operating environment, resin products may deteriorate, contract, or harden. They must be replaced on a regular basis. Soft Cover Hard Cover (provided with H5F-KB) Y92A-48F1 Y92A-48 (for H5F-B) Y92A-48E (for H5F-FB/-KB) Settings can be changed by pressing on the front of the Cover. The settings are harder to change, however, with the Cover mounted. Confirm that this does not hamper operation. Although the Soft Cover provides protection equivalent to IP54F, do not use the Time Switch in locations where it may be directly subject to splashes of oil. Flush Mounting Adapter (provided with H5F-B) Y92F-30 The Flush Mounting Adapter can be purchased individually if it is lost or damaged. Mounting Track PFP-100N, PFP-50N PFP-100N2 16 7.3±0.15 4.5 4.5 35±0.3 27±0.15 35±0.3 27 24 29.2 15 25 10 25 1,000 (5002) 5 10 25 * 1 15 25 10 25 1,000 25 10 25 15 1 1.5 (see note) Note: The values shown in parentheses are for the PFP-50N. End Plate Spacer PFP-M PFP-S 16 10 5 12 6.2 1.8 1 50 35.5 35.3 34.8 1.8 44.3 11.5 1.3 10 M4 x 8 pan head 4.8 16.5 screw 7

H5F Precautions Refer to Safety Precautions for All Timers. ■ Operating Environment !CAUTION Do not touch any of the terminals while power is being supplied. Doing (cid:127)Do not use the Time Switch in locations where condensation may so may result in electric shock. Be sure to mount the terminal cover occur due to high humidity or where temperature changes are after wiring. severe. (cid:127)Do not leave the Time Switch for long periods (i.e., one month or Do not use the Time Switch in locations subject to flammable or longer) at a high temperature with output current in the ON state. explosive gases. Doing so may result in explosion. Doing so may result in the premature deterioration of internal com- Do not disassemble, repair, or modify the Time Switch. Doing so may ponents (e.g., electrolytic capacitors). result in electric shock, fire, or malfunction. (cid:127)Separate the Time Switch from any potential sources of noise, such Tighten terminal screws to the specified torque (approx. 0.98 N⋅m). as high-voltage lines. When using inductive loads (e.g., electro- magnetic relays), connect noise-absorbing elements (resistor and Loose screws may occasionally cause fires or malfunction. (Maximum torque: 1.17 N⋅m) capacitor) to both ends of the coil. (cid:127)Separate the Time Switch from the source of static electricity when Before changing times or other settings while power is being supplied, using the Time Switch in an environment where a large amount of either turn OFF the power on the load side or set the output ON/OFF static electricity is produced (e.g., forming compounds, powders, or switch to OFF and confirm the safety of the system. fluid materials being transported by pipe). The life expectancy of the output relays depends on the switching (cid:127)Use the Time Switch within the ratings specified for temperature capacity and switching conditions. Consider the actual application and humidity. conditions and use the Time Switch within the rated load and (cid:127)Do not use the Time Switch in environments subject to shocks or electrical service life. If using the Time Switch beyond its ratings is vibration beyond the ranges specified in this document. unavoidable, use it together with an electromagnetic switch or (cid:127)Do not use the Time Switch in locations subject to dust, corrosive contactor as shown in the following diagram. gases, or direct sunlight. (cid:127)Store at the specified temperature. If the H5F has been stored at a Ecolenctatrcotmora ogrnetic Power supply Power supply temperature of less than −10°C, allow the H5F to stand at room electromagnetic temperature for at least 3 hours before use. switch (cid:127)This Time Switch is not waterproof or oil-proof. Do not use it in Circuit locations where water or oil may enter the Time Switch interior. H5F (cid:127)Organic solvents (such as paint thinner), as well as very acidic or basic solutions might damage the outer casing of the H5F. Load ■ Installation Crossover Using the Time Switch beyond its life expectancy may result in contact (cid:127)Mounting the Time Switches side-by-side may reduce the life deposition or burning. expectancies of internal components. (cid:127)When using heaters, be sure to use a thermal switch for the load Do not disassemble the Time Switch, deform the Time Switch by circuit. applying pressure, heat the Time Switch to temperatures above 100°C, or incinerate the Time Switch. Doing any of these may cause (cid:127)When driving an inductive load (e.g., coil), a surge voltage is gener- the built-in lithium battery to ignite or rupture. ated when the contacts (i.e., Time Switch output) are switched, and in some cases this may damage other devices connected to the ■ Time Switch or the same line. Absorb the surge with a capacitor Wiring and resistor as shown in the following diagram. (cid:127)Be sure to wire the terminals correctly. Time Switch output (cid:127)Do not connect more than two crimp terminals to each Time Switch terminal. Faulty contact may result in burn injury or fire. C (cid:127)Perform wiring using appropriate wires of the type specified in this Power supply Indlouacdtive document. Using a different type of wire may result in burn injury or R fire due to abnormal heat generation. As a rough guide, the capacitor (C) and resistor (R) should have the ■ Power Supplies following specifications: C: 0.5 to 1 µF for a switching current of 1 A (cid:127)Make sure that the fluctuation of the supply voltage is within the R: 0.5 to 1 Ω for a switching voltage of 1 V permissible range. Use a capacitor with a dielectric strength appropriate for the power (cid:127)Make sure that the voltage applied is within the specified range, supply voltage. Use an AC-type capacitor with AC circuits. There otherwise the internal elements of the Time Switch may be dam- may be cases where, due to inconsistencies in the nature and char- aged. acteristics of the load, delays in restoring the load may cause prob- (cid:127)Apply the power supply voltage through a breaker, relay or switch in lems. Be sure to confirm that correct operation is possible under the such a way that the voltage reaches a fixed value immediately, oth- actual operating conditions. erwise they may not be reset or a Time Switch error may result. (cid:127)When the power is turned ON, an inrush current will flow for a short time (approx. 2 A for 0.3 ms at 264 VAC). Depending on the power supply capacity, operation may not start. Be sure to use a power supply with a sufficient capacity and a breaker. 8

H5F ■ Precautions for EN61010-1 Conformance The H5F Time Switch conforms to EN61010-1 provided that the fol- lowing conditions are satisfied: Basic insulation is provided between the power supply and output terminals of the H5F. (cid:127)Output terminals are connected to devices without exposed charged parts. (cid:127)Output terminals are connected to devices with basic insulation that is suitable for the maximum operating voltage. ■ Others None of the Time Switch components are user-replaceable, including the battery. 9

H5F Operating Method ■ Operating Method 3. Press the WRITE Key. The colon SU MOTU WETH FR SA will flash and the clock will start (from 0s). 4 00 Selecting the Mode AM All of the modes can be selected using MODE , HOLIDAY, and TEST PW Keys. 4. Press the MODE Key 3 times to SU MOTU WETH FR SA • The days and times • Set a special day return to the run mode. when output will when the Time 4 00 actually turn Switch will not AM ON/OFF are operate temporarily displayed PW AM 8 30 chronologically. Factory Setting Program check Holiday Setting Mode function test hday At the time of delivery, the mode is run mode and there is no current time set- Display of factory setting TEST TEST (2 s min.) HOLIDAY HOLIDAY (2 s min.) ting. Before making any other settings, SU MOTU WETH FR SA (See note 1.) press the MODE Key for 1s min. to -- -- Run Mode • Control output enter time adjustment mode and set operates according the current time using the above proce- (See note 2.) to the settings. dure. -- -- MODE (1 s min.) Note:1. The set time is enabled when the WRITE Key is pressed. Time Adjustment Mode • Set the present day 2. The time can be displayed in either 12-hour (am/pm) or 24- hour display. (Refer to page 14.) and time. MODE Setting Timer Operation Operation Time Setting Mode P • Soer tc, lecoanr ftihrme ,o cphearantgioen, Example:Setting the Time Switch to operate from time setting. Also, set Monday to Friday between 8:30 am and 5:15pm the pulse width for MODE pulse-output Non-operationOperation Operation Operation Operation Operation Non-operation operation. Sunday Monday Tuesday Wednesday Thursday Friday Saturday • Set, confirm, change, Operation Date Setting Mode P or clear the operation MODE day and specified day 8:30 am 5:15 pm settings. 1. Enter operation time setting mode The color indicates flashing Note:1. After the last item is displayed, the mode automatically re- SU MOTU WETH FR SA turns to run mode. using the MODE Key. The P sym- bol flashes. -- -- 2. At the time of delivery, the mode is the run mode. Setting the Time 1 PW P 2. Set the ON time to 8:30 am using Example:Changing the current time setting from SU MOTU WETH FR SA Wednesday 10:30 am to Monday 4:00 am. the h and m/ P WD Keys. 8 30 1. Press the MODE Key for 1 s min. to The color indicates flashing AM enter time adjustment mode. The SU MOTU WETH FR SA 1 symbol flashes. 10 30 PW P AM 3. Press the WRITE Key. SU MOTU WETH FR SA ON (If only the hour or the minute (but PW not both) is set, the operation set- -- -- 2. Move the symbol to Monday ting time display will flash to indi- using the d Key. Change the SU MOTU WETH FR SA cate an error.) 1 PW P time to 4:00 am using the h 4 00 and m/ P WD Keys. AM 4. Set the OFF time to 5:15 pm using SU MOTU WETH FR SA ON the h and m/ P WD Keys. PW 5 15 PM 1 PW P 10

H5F 5. Press the WRITE Key. 3. Set the pulse width to 30 s using SU MOTU WETH FR SA SU MOTU WETH FR SA (Repeat steps 2 to 5 to make other the m/ P WD Key. (The pulse width settings if necessary.) -- -- can be set in the range 1 to 59 s or 30 1 to 60 min.) s 2 PW P P PW P 6. Patrieosns d tahtee sMeOttDinEg Kmeoyd teo. enter oper- SU MOTU WETH FR SA 4. Press the WRITE Key. SU MOTU WETH FR SA -- -- PW P PW P 1 P 7. Move the symbol to Saturday (or SU MOTU WETH FR SA 5. Set the ON time (the time when Sunday) using the d Key. pulse-output operation starts) to The color indicates flashing Clear the operation day indicator 8:25 am using the h and SU MOTU WETH FR SA ( ) by pressing the WRITE Key. m/ P WD Keys. 8 25 PW P AM Lit (operation day) PW P 1 P WRITE WRITE Not lit (non-operation day) 6. Press the WRITE Key. SU MOTU WETH FR SA 8. Press the MODE Key. SU MOTU WETH FR SA (Repeat steps 5 and 6 to make -- -- The Time Switch will enter run 10 30 other settings if necessary.) mode and operation based on the AM settings will start. ON 5 15 PW P 2 P PW PM 7. Press the MODE Key to enter the SU MOTU WETH FR SA operation date setting mode. Note:1. Up to 12 sets of ON-OFF settings are possible. 2. Be sure to set both ON and OFF times. If only the ON time is set, the setting will be invalid. 3. At the time of delivery, all days are set as operation days. PW P P 4. Multiple-day operation is possible. 5. Continuous operation for more than 24 hours is possible by 8. Move the symbol to Saturday (or SU MOTU WETH FR SA combining 2 or more sets of settings. (Refer to page16.) Sunday) using the d Key. Clear the operation day indicator 6. Both the timer operation and the pulse-output operation cannot be programmed together. ( ) by pressing the WRITE Key. PW P P Setting Pulse-output Operation Lit (operation day) WRITE WRITE Not lit (non-operation day) Using pulse-output operation, the Time Switch can be set to operate at the same time every day for a fixed period. 9. Press the MODE Key. The Time SU MOTU WETH FR SA Example:Setting the Time Switch to turn ON for 30s from Switch will enter run mode and 7 30 8:25 am, Monday to Friday operation based on the settings will start. AM Non-operation Operation Operation Operation Operation Operation Non-operation Sunday Monday Tuesday Wednesday Thursday Friday Saturday PW P AM 8 25 30 s Note:1. Up to 24 sets of settings are possible. 8:25 am 2. Switching between timer operation and pulse-output oper- ation will clear the operation start time, operation day, and The color indicates flashing pulse width settings. 1. Enter operation time setting mode SU MOTU WETH FR SA 3. Both the timer operation and pulse-output operation can- using the MODE Key. The P sym- -- -- not be programmed together. bol flashes. 1 PW P 2. Press the TMR/P Key to set the SU MOTU WETH FR SA Time Switch for pulse-output opera- tion. The P symbol flashes. (The -- Time Switch is set for timer opera- tion at the time of delivery.) PW P P 11

H5F Setting Partial Operation on Specified 8. Move the symbol to Saturday SU MOTU WETH FR SA Day using the d Key. Make the operation day indicator flash by The Time Switch can be set to operate according to only some of the pressing the WRITE Key. Move the settings on a user-specified day. present day indicator to Sunday PW P using the d Key. Clear the Example: operation day indicator by pressing Monday to Friday: ON at 8:30 am; OFF at 0:30 pm the WRITE Key. ON at 1:15 pm; OFF at 5:15 pm Saturday: ON at 8:30 am; OFF at 0:30 pm WRITE Lit: Operation day Non-operationOperation Operation Operation Operation Operation Specified day Not lit: Non-operation day WRITE Sunday Monday Tuesday Wednesday Thursday Friday Saturday WRITE Flashing: Specified operation day 9. Press the MODE Key. SU MOTU WETH FR SA 8:30 am to 0:30 pm (Specified Day Operation) The Time Switch will enter run mode and operation based on the 10 30 1:15 pm to 5:15 pm settings will start. The operation AM 1. Enter operation time setting mode day indicator ( ) of the specified The color indicates flashing ON 0 30 using the MODE Key. SU MOTU WETH FR SA day will flash. PW PM -- -- Note:1. Partial operation on specified day can be set for two or more programs. For each program, however, the S must PW 1 P be displayed by pressing the SELECT Key. 2. Two or more days can be specified as specified days. 2. Press the SELECT Key. The S 3. Partial operation on specified day can also be set for pulse- symbol will be displayed. Set the output operation. ON time for the specified day to SU MOTU WETH FR SA Changing Timer Operation Settings 8:30 am using the h and 8 30 S m/ P WD Keys. AM Example:Changing the ON time for program 1 from 8:30 1 PW P am to 7:45 am The color indicates flashing 3. Press the WRITE Key. SU MOTU WETH FR SA 1. Enter operation time setting mode SU MOTU WETH FR SA using the MODE Key. The ON time 8 30 -- -- for program 1 will be displayed. S AM ON 1 PW 1 P PW P 2. Change the ON time to 7:45am SU MOTU WETH FR SA 4. Set the OFF time for the specified day to 0:30 pm using the h SU MOTU WETH FR SA using the h and m/ P WD Keys. 7 45 AM and m/ P WD Keys. 0 30S ON 1 PM PW P 1 PW P 3. Press the WRITE Key. The OFF SU MOTU WETH FR SA time for program 1 will be displayed. The color indicates flashing (Make changes, if necessary, using 6 30 5. Press the WRITE Key. SU MOTU WETH FR SA the same procedure as for ON Set the time to 1:15 pm using the time.) PM 1 15 ON 1 h and m/ P WD Keys. PW P PM 2 PW P 4. Press the MODE Key to enter oper- SU MOTU WETH FR SA ation date setting mode. The opera- 6. Press the WRITE Key. tion dates will be displayed. (Make SU MOTU WETH FR SA changes, if necessary, using the Set the time to 5:15 pm using the h and m/ P WD Keys. 5 15 d and WRITE Keys.) ON PW P PM 2 PW P 5. Press the MODE Key. SU MOTU WETH FR SA 7. Press the WRITE Key. SU MOTU WETH FR SA The Time Switch will enter run 10 30 Press the MODE Key to enter oper- mode and operation will start. AM ation date setting mode. ON 6 30 PW PM PW P Note:Operation based on the changed settings will start as soon as the Time Switch returns to run mode. 12

H5F Changing Pulse-output Operation Clearing the ON/OFF Settings for Settings Individual Programs Example: Changing the pulse width from 30 s to 20 s Example: Clearing the settings for program 2 1. Enter operation time setting mode 1. Enter operation time setting mode The color indicates flashing using MODE Key. The pulse width SUTMheO cTolUor iWndEicaTteHs flFaRshinSgA using MODE Key. The ON time for SU MOTU WETH FR SA is displayed. program 1 will be displayed. 8 30 30 S AM s ON 1 PW P P PW P 2. Change the pulse width to 20 s 2. Press the WRITE Key twice. The SU MOTU WETH FR SA ON time for program 2 will be dis- SU MOTU WETH FR SA using m/ P WD Key. played. 20 1 15 s PM PW P P POWN 2 P 3. Press the WRITE Key. The ON time for program 1 will be displayed. SU MOTU WETH FR SA 3. Press the CLR Key. (Both the ON SU MOTU WETH FR SA (Make changes, if necessary, using and OFF settings are cleared with 7 40 just one operation. If this operation -- -- the h , m/ P WD and WRITE AM is performed while output is ON, Key.) PW P 1 P oSuwtiptcuht rsettauyrns s OtoN r unu nmtiol dteh.e) Time POWN 2 P 4. Press the MODE Key to enter oper- ation date setting mode. The opera- SU MOTU WETH FR SA tion dates will be displayed. (Make 4. Press the MODE Key twice. The SU MOTU WETH FR SA Time Switch will enter run mode changes, if necessary, using the and operation based on the new 10 30 d and WRITE Keys.) settings (i.e. without the cleared AM PW P P programs) will start. ON 0 30 PW PM 5. Press the MODE Key. The Time SU MOTU WETH FR SA Note:Settings for pulse-output operation can be cleared for individ- Switch will enter run mode and 7 30 ual programs in the same way. operation will start. AM Clearing all Settings PW P AM 7 40 1. Enter operation time setting mode or operation date setting mode The color indicates flashing SU MOTU WETH FR SA Note:Operation based on the changed settings will start as soon as the Time Switch returns to run mode. using the MODE Key. 8 30 S AM ON 1 PW P 2. Press the CLR Key for 3 s min. The clearing process will be com- SU MOTU WETH FR SA pleted 3s has elapsed. Output will turn OFF immediately. c lr ON PW 3. When all the settings have been SU MOTU WETH FR SA cleared, the operation time, opera- tion day, pulse width, holiday, partial -- -- operation on specified day, and override and automatic return oper- ation settings will be returned to PW 1 P their factory settings. Note:The clearing process will be canceled if the CLR Key is re- leased while clr is still flashing and only the settings for the display program will be cleared. Note:The current time cannot be deleted. 13

H5F Holiday Setting Function Switching between 12-hour (am/pm) and 24-hour Display The following example shows how to stop operation for a certain day in the present week and restore normal operation from the following week using the holiday setting function. Each time the h Key is pressed for 2 s min. in run mode, the time display switches between 12-hour (am/pm) and 24-hour display. Example:Stopping operation for Friday and Saturday in the current week and resuming normal 12-hour (am/pm) Display 24-hour Display operation from the following week The color indicates flashing SU MOTU WETH FR SA SU MOTU WETH FR SA 1. Press the HOLIDAY Key for 2 s min. The color indicates flashing 3 30 15 30 in run mode to enter holiday setting SU MOTU WETH FR SA mode. hday will flash and the oper- PM h (2 s min.) ation day indicator ( ) will light ON 5 15 ON 17 15 under the days set for operation PW PM PW day. ON hd ay PW Note:1. Switching is possible only in run mode. 2. Move the symbol to Friday using 2. The factory setting is 12-hour (am/pm) display. d Key. Clear the operation day SU MOTU WETH FR SA Override and Automatic Return indicator ( ) by pressing the WRITE Key. Repeat the procedure Operation for Saturday. (Press the WRITE Key ON hd ay again to clear the holiday setting.) PW Override and automatic return operation can be used to handle sud- den schedule changes without making changes to the program. The 3. Press the HOLIDAY Key. The Time SU MOTU WETH FR SA output status can be set to ON or OFF directly using the output ON/ Switch will enter run mode and the OFF switch. This output status is then held until the next ON/OFF operation day indicator under the 10 30 operation time. days set as holidays will turn OFF. AM (When a day set as a holiday has Example 1: Starting operation earlier than the scheduled ON 5 15 passed, the ( ) indicator under PW PM time on the present day only that day will automatically turn ON again.) Regular setting: ON at 8:30 am; OFF at 5:15 pm Use the following procedure to start operation at 7:00 am Note:1. Any day in the 7-day period starting from the present day for the present day only. can be set as a holiday. 2. Operation based on the new settings (i.e., including the Present day Next day holiday setting) will start as soon as the Time Switch re- turns to run mode. Regular 7:00 am program 3. Holiday setting mode can be entered from run mode only. Override and 8:30 am 5:15 pm 8:30 am 5:15 pm automatic return 4. If the present day setting in time adjustment mode is operation ON changed, all holiday settings will be cleared. Output 7:00 am 5:15 pm 8:30 am 5:15 pm 5. If a day set as a holiday is changed in operation date set- From the next day, output ting mode, the holiday setting for that day will be cleared. operates according to the regular program. Summer Time (DST) Function 1. Change the setting of the output ON/OFF switch from AUTO to ON. The summer time function allows the Time Switch to be used in 2. Return the setting of the output ON/OFF switch from regions that observe daylight saving time during the summer. Switch ON to AUTO while holding down the WRITE Key. ON Each time the +1h Key is pressed in run mode, the present time The ON state will be held from the point at which this AUTO will switch between the (standard) present time and the present time operation is performed (indicated by the arrow) until + 1 hour (summer time). the next (regular) OFF time. OFF The color indicates flashing Example 2: Stopping operation earlier than the SU MOTU WETH FR SA SU MOTU WETH FR SA scheduled time on the present day only 3 30 4 30 PM +1h PM Regular setting: ON at 8:30 am; OFF at 5:15 pm ON 5 15 ON 5 15+1h PW PM PW PM Use the following procedure to stop operation at 3:00 pm for the present day only. Note:1. The summer time indicator ( +1h ) is displayed while summer time is set. Present day Next day 2. The contents of the programs are not changed. Regular 3:00 pm 3. The summer time setting can only be set or cleared in run program mode. Override and 8:30 am 5:15 pm 8:30 am 5:15 pm automatic return operation ON Output 8:30 am 3:00 pm 8:30 am 5:15 pm From the next day, output operates according to the regular program. 1. Change the setting of the output ON/OFF switch from AUTO to OFF. 14

H5F 2. Return the setting of the output ON/OFF switch from Example 3: Override and automatic return operation Switch OFF to AUTO while holding down the WRITE Key. ON starting from a forced OFF while output is ON The OFF state will be held from the point at which this AUTO (pulse width: 30 min) operation is performed (indicated by the arrow) until OFF the next (regular) ON time. Regular program Note:1. This operation is possible in run mode only. Output 2. Override and automatic return operation can be cleared by From the next setting the output ON/OFF switch to the opposite of the time onwards, present status. For example, if the output is ON, override output operates and automatic return operation can be cleared by setting according to the the output ON/OFF switch to OFF. regular program. 3. Override and automatic return operation cannot be set or Point at which the Output ON/OFF Key changes from cleared if power is not being supplied to the Time Switch. AUTO to OFF. 4. Override and automatic return operation is cleared if any of Point at which the Output ON/OFF Key changes from the settings are changed. OFF to AUTO with the W R I T E Key held down. Using Override and Automatic Return Operation for Program Check Function Pulse-output Operation Override and automatic return operation proceeds in the following The days and times at which output turns ON or OFF over the course way when used for pulse-output operation. of one week can be displayed continuously in the actual order in (cid:127)If override and automatic return operation starts with a forced ON, which they will occur. output is turned ON for the time corresponding to the set pulse width. 1. Press the TEST Key for 2 s min. in The color indicates flashing items. run mode to start the program (cid:127)If override and automatic return operation starts from a forced OFF, check. SU MOTU WETH FR SA output remains OFF until the pulse output ends. The display will flash test and the 1 15 The operation method is the same as for timer operation. day and time of the next change in PM output status will be displayed. Example 1: Override and automatic return operation PW te st starting with a forced ON while output is ON In the above example, output will (pulse width: 30 min) turn ON at 1:15 pm on Monday. Regular 2. Press the WRITE Key. program The display will change to the day SU MOTU WETH FR SA and time of the next change in out- 5 30 Output put status. (Continue pressing the 30 min From the next PM time onwards, WRITE Key to display the days and te st output operates times for one week.) PW according to the In the above example, output will regular program. turn OFF at 5:30 pm on Monday. Point at which the Output ON/OFF Key changes from AUTO to ON. 3. If the WRITE Key is pressed with SU MOTU WETH FR SA Point at which the Output ON/OFF Key changes from the last setting for the week dis- ON to AUTO with the W R I T E Key held down. played, end is displayed for 2 s and e nd then the Time Switch automatically Example 2: Override and automatic return operation returns to run mode. starting with a forced ON while output is OFF PW (pulse width: 30 min) Note:1. The program check can be started from run mode only. 2. Press the TEST Key again to return to run mode before Regular reaching the end of the program check function display se- program quence. Output 3. The ON and OFF symbols ( / ) displayed during 30 min program check have no effect on the present operation. From the next time onwards, output 4. Only ON times are displayed for pulse-output operation. operates according to the regular program. Point at which the Output ON/OFF Key changes from AUTO to ON. Point at which the Output ON/OFF Key changes from ON to AUTO with the W R I T E Key held down. 15

H5F ■ Setting Examples Example 3: Use the settings given below to turn ON output from 8:00 pm to 7:00 am from Monday As shown in the following examples, continuous operation for more to Thursday and from 8:00 pm on Friday right than 24 hours is possible by combining two or more settings. Refer to through to 7:00 am on Monday. Setting Precautions for more details. Example 1: Use the settings given below to turn ON SU MO TU WE TH FR SA output from 8:30 am on Monday right through 7:00 am 2:00 pm to 0:30 pm on Saturday. 1:00 pm 8:00 am 8:00 am SU MO TU WE TH FR SA 1:00 pm 0:30 pm Operation time settings: 1:00 pm to 8:00 am (specified day operation) 7:00 am to 2:00 pm 8:30 am 2:00 pm 0:30 pm Operation time settings: Operation day settings: 1:00 pm to 0:30 pm Specified day ( ): Monday 8:30 am to 2:00 pm Operation day ( ): Tuesday, Wednesday, Thursday, Friday ■ Operation day settings: Setting Precautions Operation day ( ): Monday, Tuesday, Wednesday, Thursday, Friday 1. If settings overlap, the earliest ON time and the latest OFF time will be used. Example 2: Use the settings given below to turn ON output from 1:00 pm on Monday right Program 1 + through to 8:00 am on Saturday. Program 2 SU MO TU WE TH FR SA Output 7:00 am 2:00 pm (cid:127)Output will stay ON continuously without interruption. 1:00 pm 8:00 am 8:00 am (cid:127)If an ON and OFF setting are made for the same time, the out- put status will not change at that time. Operation time settings: 2. If there is a switch between timer operation and pulse-output 1:00 pm to 8:00 am (specified day operation) operation, the operation time, operation day, and pulse width set- 7:00 am to 2:00 pm tings will all be cleared. Operation day settings: Specified day ( ): Monday Operation day ( ): Tuesday, Wednesday, Thursday, Friday ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 16

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2015.7 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2015 All Right Reserved.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: H5F-KB H5F-B