Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

H 1 1 L September 2014 1 M , H 1 1 L 2 M H11L1M, H11L2M, H11L3M , H 1 6-Pin DIP Schmitt Trigger Output Optocoupler 1 L 3 M Features Description — ■ High Data Rate, 1 MHz Typical (NRZ) The H11LXM series has a high-speed integrated circuit 6 ■ Free from Latch-up and Oscilliation Throughout detector optically coupled to a gallium-arsenide infrared -P Voltage and Temperature Ranges emitting diode. The output incorporates a Schmitt trigger, in ■ Microprocessor Compatible Drive which provides hysteresis for noise immunity and pulse D ■ Logic Compatible Output Sinks 16 mA at 0.4 V shaping. The detector circuit is optimized for simplicity of IP operation and utilizes an open-collector output for S Maximum maximum application flexibility. c ■ Guaranteed On/Off Threshold Hysteresis h m ■ Wide Supply Voltage Capability, Compatible with All i t Popular Logic Systems t T ■ Safety and Regulatory Approvals: r i g – UL1577, 4,170 VACRMS for 1 Minute g e – DIN-EN/IEC60747-5-5, 850 V Peak Working r Insulation Voltage O u t Applications p u ■ Logic-to-Logic Isolator t O ■ Programmable Current Level Sensor p t ■ Line Receiver—Eliminate Noise and Transient o c Problems o ■ AC to TTL Conversion—Square Wave Shaping u p ■ Digital Programming of Power Supplies le r ■ Interfaces Computers with Peripherals Schematic Package Outlines ANODE 1 6 V CC CATHODE 2 5 GND Truth Table Input Output 3 4 VO H L L H Figure 1. Schematic Figure 2. Package Outlines ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7

H 1 Safety and Insulation Ratings 1 L 1 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit M data. Compliance with the safety ratings shall be ensured by means of protective circuits. , H Parameter Characteristics 1 1 L Installation Classifications per DIN VDE < 150 VRMS I–IV 2 M 0110/1.89 Table 1, For Rated Mains Voltage < 300 V I–IV RMS , H Climatic Classification 55/100/21 1 1 Pollution Degree (DIN VDE 0110/1.89) 2 L 3 Comparative Tracking Index 175 M — 6 Symbol Parameter Value Unit - P i Input-to-Output Test Voltage, Method A, V x 1.6 = V , n Type and Sample Test with t = 10 s, PartIiOaRl DMischarge <P R5 pC 1360 Vpeak D m VPR IP Input-to-Output Test Voltage, Method B, V x 1.875 = V , 100% Production Test with t = 1 s, PartiaIOl DRMischarge < 5 pPCR 1594 Vpeak S m c h V Maximum Working Insulation Voltage 850 V IORM peak m V Highest Allowable Over-Voltage 6000 V i IOTM peak t t External Creepage ≥ 7 mm T r i External Clearance ≥ 7 mm g g External Clearance (for Option TV, 0.4" Lead Spacing) ≥ 10 mm e r DTI Distance Through Insulation (Insulation Thickness) ≥ 0.5 mm O u TS Case Temperature(1) 175 °C tp IS,INPUT Input Current(1) 350 mA ut O P Output Power(1) 800 mW S,OUTPUT p R Insulation Resistance at T , V = 500 V(1) > 109 Ω to IO S IO c o Note: u 1. Safety limit values – maximum values allowed in the event of a failure. p l e r ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 2

H 1 Absolute Maximum Ratings 1 L 1 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be M operable above the recommended operating conditions and stressing the parts to these levels is not recommended. , H In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. 1 The absolute maximum ratings are stress ratings only. T = 25°C unless otherwise specified. 1 A L 2 Symbol Parameters Value Units M , Total Device H 1 T Storage Temperature -40 to +125 °C 1 STG L T Operating Temperature -40 to +85 °C 3 OPR M T Junction Temperature -40 to +125 °C J — TSOL Lead Solder Temperature 260 for 10 seconds °C 6 - P Total Device Power Dissipation at 25°C 250 mW P D i n Derate Above 25°C 2.94 mW/°C D Emitter I P I Continuous Forward Current 30 mA S F c V Reverse Voltage 6 V h R m IF(pk) Forward Current – Peak (1 µs pulse, 300 pps) 100 mA it t PD LED Power Dissipation 60 mW T r Detector ig g P Detector Power Dissipation 150 mW e D r V V Allowed Range 0 to 16 V O O 45 u VCC V65 Allowed Range 3 to 16 V tp I I Output Current 50 mA u O 4 t O p t o c o u p l e r ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 3

H 1 Electrical Characteristics 1 L 1 TA = 25°C unless otherwise specified. M , Individual Component Characteristics H 1 Symbol Parameters Test Conditions Device Min. Typ. Max. Units 1 L 2 Emitter M VF Input Forward Voltage IF = 10 mA All 1.2 1.5 V , H 1 IF = 0.3 mA 0.75 1.0 1 L I Reverse Current V = 3 V All 10 µA 3 R R M CJ Capacitance V = 0, f = 1.0 MHz All 100 pF — Detector 6 VCC Operating Voltage Range All 3 15 V -P i I Supply Current I = 0, V = 5 V All 1.6 5.0 mA n CC(off) F CC D IOH Output Current, High IF = 0, VCC = VO = 15 V All 100 µA IP S c Transfer Characteristics h m Symbol Parameter Test Conditions Device Min. Typ. Max. Units i t t T DC Characteristics r i g I Supply Current I = 10 mA, V = 5 V All 1.6 5.0 mA CC(on) F CC g VOL Output Voltage, Low RL= 270 Ω,VCC = 5 V, All 0.2 0.4 V er I = I max. O F F(on) u IF(on) Turn-On Threshold Current(2) RL = 270 Ω, VCC = 5 V H11L1M 1.6 mA tp H11L2M 10.0 u t O H11L3M 5.0 p IF(off) Turn-Off Threshold Current RL = 270 Ω, VCC = 5 V All 0.3 1.0 mA to c IF(off) / IF(on) Hysteresis Ratio RL = 270 Ω, VCC = 5 V All 0.50 0.75 0.90 o u AC Characteristics, Switching Speed p l t Turn-On Time R = 270 Ω, V = 5 V, All 1.0 4.0 µs e on L CC r I = I , T = 25°C F F(on) A t Fall Time R = 270 Ω, V = 5 V, All 0.1 µs f L CC I = I , T = 25°C F F(on) A t Turn-Off Time R = 270 Ω, V = 5 V, All 1.2 4.0 µs off L CC I = I , T = 25°C F F(on) A t Rise Time R = 270 Ω, V = 5 V, All 0.1 µs r L CC I = I , T = 25°C F F(on) A Data Rate All 1.0 MHz Isolation Characteristics Symbol Parameter Test Conditions Min. Typ. Max. Units V Input-Output Isolation Voltage t = 1 Minute 4170 VAC ISO RMS C Isolation Capacitance V = 0 V, f = 1 MHz 0.4 0.6 pF ISO I-O R Isolation Resistance V = ± 500 VDC, T = 25°C 1011 Ω ISO I-O A Note: 2. Maximum I is the maximum current required to trigger the output. For example, a 1.6 mA maximum trigger current would F(ON) require the LED to be driven at a current greater than 1.6 mA to guarantee the device turns on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 30 mA. ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 4

H 1 Typical Performance Curves 1 L 1 M 6 1.6 UT VOLTAGE (V) 345 IVF(OOHFF) IF(ON) RVTACL C== 22=75 5°0C VΩ )DEZILAMRON( TNERRUC 111...024 TTUURRNN O ONF TFH TRHERSEHSOHITIFFLOA (ODN L=NOD) 2AR5TMo CVACLCI Z=E 5D V TO: , H11L2M, H1 – OUTPO 2 DLOHSE 0.8 1L3M V 1 RH 0.6 — T VOL –I F 0.4 6 00 1 2 3 0 2 4 6 8 10 12 14 16 -P IF – INPUT CURRENT (mA) VCC – SUPPLY VOLTAGE (V) in Figure 3. Transfer Characteristics Figure 4. Threshold Current vs. Supply Voltage D I P )D S E ZIL 1.6 2 ch A M m R 1.4 )V ON ( W it ( TNERRUC DLOHSERHT –I ,I ))nffOO((FF 000011......246802 -50 -25 TA –0 TEMPE2R5ATURE5 0(NVToCACO C=)R =2M 55Ao VC7L5IZED TO:100 OL ,EGATLOV TUPTUO - VLO 000000000.........12345678911VIRFC L= C= I= F2 (7O5N0 V) Ω I – LOAD C10URRENT (mA) 100 t Trigger Output Opto O c Figure 5. Threshold Current vs. Supply Temperature Figure 6. Output Voltage, Low vs. Load Current o u p l e r 6 1.7 5 TA = 0 °C V) 1.6 IF = 5m A 25 °C E ( )Am 4 70°C LTAG 1.5 ( TNERRUC 3 WARD VO 1.4 TA = 55°C YLPPU 2 – FOR 1.3 TA = 25°C S –I C 1 TA = 0°C25°C70°C V F 1.2 TA = 100°C I = 0 mA F 1.1 0 0 2 4 6 8 10 12 14 16 1.0 1 10 100 V – SUPPLY VOLTAGE (V) CC IF – LED FORWARD CURRENT (mA) Figure 7. Supply Current vs. Supply Voltage Figure 8. LED Forward Voltage vs. Forward Current ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 5

H 1 Typical Performance Curves (Continued) 1 L 1 M C I6 5V VIN 5V 50% , H I 0 1 F 1 L RE 1 H11L1 6 RL 270Ω 2M VIN 4 VO , H ton toff 1 tr = tf ≤ 0.01 μS 2 5 0.1μF 1L Z = 50 Ω 3 M 10% V O — 90% 6 - P tf tr in D Figure 9. Switching Test Circuit and Waveforms IP S c h m Reflow Profile i t t T r 300 i g 260°C g 280 e r 260 O >245°C = 42 Sec 240 u t p 220 u t 200 O p 180 Time above to 160 183°C = 90 Sec c °C o 140 u p 120 l e 100 1.822°C/Sec Ramp up rate r 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) Figure 10. Reflow Profile ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 6

H 1 Ordering Information 1 L 1 Part Number Package Packing Method M , H H11L1M DIP 6-Pin Tube (50 Units) 1 1 H11L1SM SMT 6-Pin (Lead Bend) Tube (50 Units) L 2 H11L1SR2M SMT 6-Pin (Lead Bend) Tape and Reel (1000 Units) M H11L1VM DIP 6-Pin, DIN EN/IEC60747-5-5 Option Tube (50 Units) , H H11L1SVM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tube (50 Units) 1 1 L H11L1SR2VM SMT 6-Pin (Lead Bend), DIN EN/IEC60747-5-5 Option Tape and Reel (1000 Units) 3 M H11L1TVM DIP 6-Pin, 0.4” Lead Spacing, DIN EN/IEC60747-5-5 Option Tube (50 Units) — Note: 6 3. The product orderable part number system listed in this table also applies to the H11L2M and H11L3M product - P families. i n D I Marking Information P S c h m i 1 tt T r i g H11L1 2 g e r V X YY Q 6 O u t p u t 3 4 5 O p t o Figure 11. Top Mark c o Table 1. Top Mark Definitions u p l 1 Fairchild Logo e r 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 One-Digit Year Code, e.g., “4” 5 Digit Work Week, Ranging from “01” to “53” 6 Assembly Package Code ©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com H11L1M, H11L2M, H11L3M Rev. 1.0.7 7

None

None

None

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative © Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O N Semiconductor: H11L1SR2VM H11L1SM H11L1SVM H11L1SR2M H11L1VM H11L1M H11L1TVM