Gap Pad® VO Ultra Soft July 2011 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF GAP PAD VO ULTRA SOFT Ultra Conformable,Thermally Conductive PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD Material for Filling Air Gaps Color Mauve/Pink Mauve/Pink Visual FEATURES AND BENEFITS Reinforcement Carrier Fiberglass Fiberglass — • Thermal conductivity: 1.0 W/m-K Thickness (inch) / (mm) 0.020 to 0.250 0.508 to 6.350 ASTM D374 • Highly conformable, low hardness Inherent Surface Tack (1 sided) 1 1 — • “Gel-like” modulus Density (BulkRubber) (g/cc) 1.6 1.6 ASTM D792 Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269 • Decreased strain Hardness(BulkRubber)(Shore00) (1) 5 5 ASTM D2240 • Puncture, shear and tear resistant Young's Modulus (psi) / (kPa) (2) 8 55 ASTMD575 • Electrically isolating Continuous Use Temp (°F) / (°C) -76 to 392 -60 to 200 — ELECTRICAL Dielectric BreakdownVoltage (Vac) 6000 6000 ASTMD149 Dielectric Constant (1000 Hz) 5.5 5.5 ASTMD150 Volume Resistivity (Ohm-meter) 1011 1011 ASTMD257 Flame Rating V-0 V-0 U.L.94 THERMAL Thermal Conductivity (W/m-K) 1.0 1.0 ASTM D5470 THERMAL PERFORMANCE vs.STRAIN Deflection (% strain) 10 20 30 Thermal Impedance (°C-in2/W) 0.040" (3) 1.97 1.87 1.68 1) Thirty second delay value Shore 00 hardness scale.2)Young’s Modulus,calculated using 0.01 in/min.step rate of strain Gap Pad® VO Ultra Soft is recommended with a sample size of 0.79 inch2.3) The ASTM D5470 test fixture was used.The recorded value includes interfacial ther- mal resistance.These values are provided for reference only.Actual application performance is directly related to the sur- for applications that require a minimum face roughness,flatness and pressure applied. amount of pressure on components.The viscoelastic nature of the material also TYPICAL APPLICATIONS INCLUDE gives excellent low-stress vibration • Telecommunications dampening and shock absorbing • Computer and peripherals characteristics. Gap Pad® VO Ultra Soft is an electrically isolating material, which • Power conversion allows its use in applications • Between heat-generating semiconductors or requiring isolation between heat sinks magnetic components and a heat sink and high-voltage, bare-leaded devices. • Area where heat needs to be transferred to a frame, Note: To build a part number, visit our chassis, or other type of heat spreader website at www.bergquistcompany.com. CONFIGURATIONS AVAILABLE • Sheet form and die-cut parts Thickness vs. Thermal Resistance Gap Pad VO Ultra Soft Thickness (mils) 221150500000 Resultant 500 1 2 3 4 5 6 7 8 9 10 Thermal Resistance (C-in2/W) PDS_GP_VOUS_0711

TDS Gap Pad® VO Ultra Soft, July 2011 Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. The product can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable, on whatever legal ground, Henkel’s liability will in no event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S. the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Any liability in respect of the information in the Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except if otherwise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporation’s products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Trademark usage Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. and elsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office Reference 0.1 Americas Europe Asia +1.800.347.4572 +31.35.5380684 +852.2690.9296 For the most direct access to local sales and technical support visit: www.bergquistcompany.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: B ergquist Company: GPVOU-0.020-01-0816 GPVOU-0.040-01-0816 GPVOU-0.060-01-0816 GPVOU-0.080-01-0816 GPVOU-0.100-01- 0816 GPVOU-0.125-01-0816 GPVOUS-0.020-00-0816 GPVOUS-0.040-00-0816 GPVOUS-0.060-00-0816 GPVOUS- 0.080-00-0816 GPVOUS-0.125-00-0816 GPVOUS-0.020-AC-0816 GPVOUS-0.250-AC-0816 GPVOUS-0.200-AC-00 GPVOUS-0.060-AC-0816 GPVOUS-0.080-AC-0816 GPVOUS-0.040-AC-0816 GPVOUS-0.080-01-0816 GPVOUS- 0.040-01-0816 GPVOUS-0.060-01-0816 GPVOUS-0.020-01-0816 GPVOUS-0.250-01-0816 GPVOUS-0.100-01-0816 GPVOUS-0.200-01-0816 GPVOUS-0.125-01-0816 GPVOUS-0.160-01-0816 GPVOUS-0.125-AC-0816 GPVOUS-B- 0.020-01-0816 GPVOUS-B-0.040-AC-0816 GPVOUS-B-0.060-AC-0816 GPVOUS-B-0.080-AC-0816 GPVOUS-B- 0.125-AC-0816 GPVOUS-B-0.060-01-0816 GPVOUS-B-0.040-01-0816 GPVOUS-0.100-AC-0816 GPVOUS-B-0.020- AC-0816 GPVOUS-B-0.080-01-0816 GPVOUS-B-0.100-01-0816 GPVOUS-B-0.100-AC-0816 GPVOUS-B-0.125-01- 0816 GPVOUS-0.160-AC-0816 GPVOUS-0.200-AC-0816