G5V-1 Low Signal Relay Ultra-miniature, Highly Sensitive SPDT Relay for Signal Circuits •Ultra-miniature at 12.5 × 7.5 × 10 mm (L × W × H). (cid:129)Wide switching power of 1 mA to 1 A. (cid:129)High sensitivity: 150 mW nominal coil power consumption. (cid:129)Fully-sealed construction offering environment resistance. (cid:129)Conforms to FCC Part 68 requirements for coil to contacts. (1,500 V, 10 × 160 μs) (cid:129)Models for ambient temperatures up to 90°C added to series. RoHS Compliant ■Model Number Legend ■Application Examples G5V-@-@ 1. Number of Poles/Contact Form (cid:129)Telecommunication equipment — — 1: 1-pole/SPDT (1c) (cid:129)Audio-visual products 1 2 (cid:129)Security equipment 2. Classification (cid:129)Building automation equipment G None: Standard (Ambient operating temperature 70°C max.) 5 T90: Ambient operating temperature 90°C max. V - 1 ■Ordering Information ■Standard Model Specifications Enclosure Terminal Rated coil Minimum Contact type: Single crossbar (Au-alloy + Ag) Classification Contact form Model rating Shape voltage packing unit Enclosure rating: Plastic sealed 3 VDC 5 VDC Terminal shape: PCB terminals 6 VDC Standard G5V-1 9 VDC Fully SPDT PCB 12 VDC 25 pcs/tube sealed (1c) terminals 24 VDC 5 VDC G5V-1-T90 G5V-1-T90 12 VDC 24 VDC Note:When ordering, add the rated coil voltage to the model number. Example: G5V-1 DC3 Rated coil voltage However, the notation of the coil voltage on the product case as well as on the packing will be marked as @@ VDC. ■Ratings ●Coil ●Contacts G5V-1 (Standard) Load Resistive load Must operate Must release Item Rated Coil Max. voltage Power voltage voltage Contact type Single crossbar Rated voltage current resistance (V) consumption (mA) (Ω) (V) (V) (mW) Contact Au-alloy + Ag % of rated voltage material 3 VDC 50 60 0.5 A at 125 VAC; Rated load 5 VDC 30 167 1 A at 24 VDC 69 VVDDCC 1265.7 254400 80% max. 10% min. 20203%°C at Approx. 150 Rcuartreedn tcarry 2 A 12 VDC 12.5 960 Max. switching 24 VDC 6.25 3,840 voltage 125 VAC, 60 VDC G5V-1-T90 Max. switching 1 A current Must operate Must release Rated Coil Max. voltage Power voltage voltage Rated voltage current resistance (V) consumption (mA) (Ω) (V) (V) (mW) % of rated voltage 5 VDC 30 167 200% at 12 VDC 12.5 960 70% max. 10% min. Approx. 150 23°C 24 VDC 6.25 3,840 Note 1.The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2.The operating characteristics are measured at a coil temperature of 23°C. 3.The maximum voltage is the highest voltage that can be imposed on the relay coil. 4.G5V-1-2 types with a must operate voltage of 70% max. are available as special series products. 1

G5V-1 Low Signal Relay ■Characteristics Contact resistance *1 100 mΩ max. Operate time 5 ms max. Release time 5 ms max. 1,000 MΩ min. (at 500 VDC between coil and contacts, Insulation resistance *2 at 250 VDC between contacts of same polarity.) Dielectric Between coil and contacts 1,000 VAC, 50/60 Hz for 1 min strength Between contacts of the same polarity 400 VAC, 50/60 Hz for 1 min Note:The values here are initial values. 10 to 55 to 10 Hz, 1.65 mm single amplitude Destruction *1. Measured with 10 mA at 1 VDC with a voltage drop Vibration (3.3 mm double amplitude) method. resistance 10 to 55 to 10 Hz, 1.65 mm single amplitude Malfunction *2. Measured with a 500 VDC megohmmeter between (3.3 mm double amplitude) coil and contacts and a 250 VDC megohmmeter Shock Destruction 1,000 m/s2 between contacts with the same polarity applied to resistance Malfunction 100 m/s2 the same parts as those used for checking the Mechanical 5,000,000 operations min. (at 36,000 operations/hr) dielectric strength. Durability Electrical 100,000 operations min. *3. This value was measured at a switching frequency (under rated load, at 1,800 operations/hr) of 120 operations/min and the criterion of contact Failure rate (P level) (reference value) *3 1 mA at 5 VDC resistance is 100 Ω. -40°C to 70°C (Standard), -40°C to 90°C (G5V-1-T90) This value may vary depending on the switching Ambient operating temperature (with no icing or condensation) frequency and operating environment. Always Ambient operating humidity 5% to 85% double-check relay suitability under actual operating Weight Approx. 2 g conditions. G 5 V - 1 2

G5V-1 Low Signal Relay ■Engineering Data ●Maximum Switching Capacity ●Durability ●Ambient Temperature vs. Maximum Coil Voltage Switching current (A)0.5317 4Durability (x10 operations)5310007500000 24 VDC resistive load Maximum coil voltage (%)221505000 G5V-1-T90 0.5 30 100 0.3 Standard 125 VAC 50 10 resistive load DC resistive load AC resistive load 7 0.1 5 0 10 30 50 70 100 300 500 0 0.2 0.4 0.6 0.8 1.0 1.2 −40 −20 0 20 40 60 70 80 90100 Switching voltage (V) Switching current (A) Ambient temperature (°C) Note:The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ●Ambient Temperature vs. Must ●Shock Malfunction Operate or Must Release Voltage G5V-1 G5V-1-T90 On the basis of rated voltage (%) 108640000 SNaummpbleer: oGf 5RVe-l1a ys: 10 pcs mmmXaai nxx... On the basis of rated voltage (%)108640000 SNaummpbleer: oGf 5RVe-l1a-yTs9: 010 pcs mmainX−x.. 1,0X00 1,864200000000000Y200 1,0Z00 -GV51 X ma−x. 1,000 400Denee- rgized 1,000 X Z' 600 X' min. min. 20 20 800 Shock direction Must operate voltage Must operate voltage X X' 1,000 Energized Must release voltage Must release voltage Y Y' 0 0 Z Unit: m/s2 -60 -40 -20 0 20 Amb4ie0n t tem60p erat8u0re (1°C00) −60 −40 −20 0 20A mb4ie0n t tem60p eratu8r0e (1°C00) Y' Z' SNaummpbleer: oGf 5RVe-l1a y1s2: V10D Cpcs Test conditions: Shock is applied in ±X, ±Y, and ±Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. ●Dial Pulse Test *1 ●Contact Reliability Test *1, *2 On the basis of rated voltage (%) 8765432100000000 SNMMauuummssttpb orleeeprl: ee oGarfa s5RteVee -vvl1aoo yl1lttsa2a:g g V6ee DpCcs mmmmmaiaiannxxx..... ΩContact resistance (m)1,054321000000000000 SNTlS7o,eawua2smmdi0ttc 0pbach leotoei nrn5p: god eGV firft 5DariRoeVtCienqo-ls 1una1: esy 1Rmn/s2hc:eA yV1s:i0D s tCpivces NNOC ccoonnttaacctt 1,000 Test conditions: Contact load ΩContact resistance (m)1530005310000000 CSWownJit-ta1cc3ht 9Ncirn5eo Og(s0nw i stfiartt1eahcn0q tac0uer ec n-kciyllNc:e o2rC5)n00 tP0aP c1tS,000 5,000 10,00mmm0aii nnx..5.0,000 54321000000 5 10 50 100 50mm0mm aa1iinnxx,..0..00 Rotation (×103 turns) Operating frequency (×104 operations) *1. The tests were conducted at an ambient temperature of 23°C. *2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. ●High-frequency Characteristics (cid:129)Test Conditions G5V-1 HR 8502A RF HR 8502A Naneatwlyozrekr 850H1PA RA Trteersfalten-csstemiotinssion 50Ω norSmtoarlaizgeer B Terminator Note:The high-frequency characteristics data were measured using a dedicated circuit board and actual values will vary depending on the usage conditions. Check the characteristics of the actual Terminals which were not being measured were terminated with 50 Ω. equipment being used. Measuring impedance: 50 Ω 3

G5V-1 Low Signal Relay ●High-frequency Characteristics ●High-frequency Characteristics ●High-frequency Characteristics (Isolation) *1, *2 (Insertion Loss) *1, *2 (Return Loss, V.SWR) *1, *2 (Average value (initial)) (Average value (initial)) (Average value (initial)) Isolation (dB) 200 SNaummpbleer: oGf 5RVe-l1ays: 5 pcs Insertion loss (dB)0.05 Return loss (dB) 100 SNaummpbleer: oGf 5RVe-l1ays: 5 pcs 11..43V.SWR 40 20 1.2 Between a-c 1.0 Return loss 60 30 1.1 Between b-c 1.5 80 40 1.0 Sample: G5V-1 V.SWR Number of Relays: 5 pcs Frequency (MHz) 100 2.0 50 1 3 5 10 30 50 100 1 3 5 10 30 50 100 1 3 5 10 30 50 100 Frequency (MHz) Frequency (MHz) Frequency (MHz) ●Must Operate and Must Release ●Distribution of Bounce Time *1 Time Distribution *1 mber of contacts 3205SNaummpbleer: oGf 5RVe-l1a y1s2: V50D Cpcs MMuusstt orepleearastee ttiimmee mber of contacts 3205SGN50au5 mmVpc-pb1slee 1r: 2o fV RDeClays: ORepleeraastien gb obuonucnec eti mtimee G Nu 20 Nu 20 5 V 15 15 -1 *1. The tests were conducted at an ambient 10 10 temperature of 23°C. *2. High-frequency characteristics depend on the PCB to which the Relay is mounted. 5 5 Always check these characteristics, including endurance, in the actual machine before use. 0 0.5 1 1.5 2 2.5 3 3.5 4 0 1 2 3 4 5 6 7 8 Time (ms) Time (ms) ■Dimensions G5V-1 PCB Mounting Holes Terminal Arrangement/ (Bottom View) Internal Connections 7.5 max. (Bottom View) 12.5 max. (7.3)* 2.54 6-1 dia. holes (12.3)* 2.54 (1.11) 10(9 m.9a)*x.0.5 5.08±0.1 1 2 5 10 9 6 3.5 (1.11) 2.54 7.62 (No coil polarity) 0.5 0.5 (1.07) (1.07) 0.3 0.3 10.16±0.1 * Average value Note: indicate the product's directional marks. Note:Each value has a tolerance of ±0.3 mm. ■Approved Standards ■Precautions UL recognized: (File No. E41515) (cid:129)Please refer to “PCB Relays Common Precautions” for correct CSA certified: (File No. LR31928) use. Model Contact Coil ratings Contact ratings Number of test Correct Use form operations 1 A, 30 VDC at 40°C •Long-term Continuously ON Contacts SPDT 6,000 G5V-1 3 to 24 VDC 0.3 A, 110 VDC at 40°C (1c) Using the Relay in a circuit where the Relay will be ON 0.5 A, 125 VAC at 40°C 100,000 continuously for long periods (without switching) can lead to SPDT 1 A, 30 VDC at 90°C 100,000 G5V-1-T90 (1c) 5 to 24 VDC 0.5 A, 125 VAC at 90°C 100,000 unstable contacts, because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. Be sure to use a fail-safe circuit design that provides protection against contact failure or coil burnout. (cid:129)Relay Handling When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering. 4

G5V-1 Low Signal Relay G 5 V - 1 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K048-E1-07 1216(0207)(O) 5

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: G5V-1-DC5 G5V-1-DC6 G5V-1-DC9 G5V-1-DC12 G5V-1-DC24 G5V-1-DC3 G5V-13-DC12 G5V-13-DC24 G5V- 1F-DC12 G5V-13 DC3 G5V-1-2 DC12 G5V-1-2 DC24 G5V-1-2 DC5 G5V-1-2 DC6 G5V-1-2 DC9 G5V-13 DC5 G5V-1-T90 DC24 G5V-1-T90 DC5 G5V-1-T90 DC12 G5V-1-9 DC24