PCB Relay G5T Slim Relay capable of switching up to 5 A, Ideal for use In Air Conditioners, Water Heaters, and Small Electrical Appliances •Economical slim relay ideal for high density mounting (cid:129)Low power consumption (200mW) (cid:129)10-kV impulse withstand voltage (between coil and contacts) (cid:129)UL recognized / CSA certified. VDE Approved. (cid:129)Tracking Resistance: CTI ≥ 250 V (cid:129)RoHS compliant Ordering Information ■ List of Models Models Enclosure rating Contact form G5T-1A Flux protection SPST-NO Note:When ordering, add the rated coil voltage to the model number. Example: G5T-1A DC 24 Rated coil voltage Model Number Legend G5T DC 1 2 3 1. Number of Poles 1: 1pole 2. 2. Contact Form A: SPST-NO 3. 3. Rated Coil Voltage 5, 12, 24 Specifications @ 23°C (coil resistance ± 10%) ■ Coil Ratings Rated voltage Rated current Coil resistance Pick-up voltage Dropout voltage Maximum voltage Power (VDC) (mA) (Ω) consumption (mW) 5 40 125 75% max. 5% min. 110% Approx. 200 12 16.7 720 24 8.3 2880 PCB Relay G5T 119

■ Contact Ratings Rated load (resistive) 5 A at 250 VAC 5 A at 30 VDC Rated carry current 5 A Max. switching voltage 250 VAC, 30 VDC Max. switching current 5 A Max. switching capacity 1250 VA, 150 W Minimum Permissible Load* 10 mA at 5 VDC *P level: λ = 0.1 X 10-6/operation 60 ■ Characteristics Contact resistance 100 mΩ max. (measured by voltage drop method using 1 A @ 5 VDC) Operate time 10 ms max. Release time 10 ms max. Insulation resistance 1,000 MΩ min. (at 500 VDC) Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between coil and contacts 750 VAC, 50/60 Hz for 1 min. between contacts of same polarity Vibration resistance Destruction 10 to 55 Hz, 1.5 mm double amplitude Malfunction 10 to 55 Hz, 1.5 mm double amplitude Shock resistance Destruction 1,000 m/s2 (approx.100 G) Malfunction 100 m/s2 (approx. 10 G) Service Life Mechanical 2,000,000 operations min. (at 18,000 operations/hr) Electrical 100,000 operations min. (3 A at 250 VAC, 30 VDC) (resistive load) 30,000 operations min. (5 A at 250 VAC, 30 VDC) (at 1,800 operations/hr) Ambient operating temperature -40°C to 70°C (with no icing or condensation) Ambient operating humidity 5% to 85% Weight Approx. 3 g Note:1. Data shown above are of initial value. 2. Please avoid ultrasonic cleaning this relay. ■ Approvals UL Recognized (File No. E41515) / CSA Certified (File No. 1527954) - - Ambient Temp. = 40°C Model Coil rating Contact rating G5T-1A 5, 12, 24 VDC 5 A, 250 VAC (resistive), 6,000 cycles 5 A, 30 VDC (resistive), 6,000 cycles VDE0435 (EN61810-1) Model Coil rating Contact rating G5T-1A 5,12, 24 VDC 5 A, 250 VAC (cosφ = 1) 10,000 cycles 5 A, 30 VDC (L/R = 0 ms) 10,000 cycles 3 A, 250 VAC (cosφ = 1) 100,000 cycles CQC (license No. 04001010419) Model Coil rating Contact rating G5T-1A 5,12, 24 VDC 5 A, 250 VAC resistive,10,000 cycles 5 A, 30 VAC resistive,10,000 cycles 120 PCB Relay G5T

Dimensions Note:All units are in millimeters unless otherwise indicated. G5T-1A Terminal Mounting Holes Arrangement/Internal (Bottom View) Connection s(Bottom View) Tolerance: ±0. 1mm Unless specified 0.4 *Typical value PCB Relay G5T 121

MEMO 122 PCB Relay G5T

Omron Electronic Components, LLC (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, Terms and Conditions of Sales medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. I. GENERAL (d) Systems, machines, and equipment that could present a risk to life or property. 1. Definitions: The words used herein are defined as follows. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING (a) Terms: These terms and conditions SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM (b) Seller: Omron Electronic Components LLC and its subsidiaries AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE (c) Buyer: The buyer of Products, including any end user in section III through VI PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE (d) Products: Products and/or services of Seller WITHIN THE OVERALL EQUIPMENT OR SYSTEM. (e) Including: Including without limitation 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY invoices, purchase orders and other documents, whether electronic or in writing, relating SELLER. to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of purchase order or other documents which are inconsistent with, or in addition to, these a programmable Product. Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including IV. WARRANTY AND LIMITATION section III of these Terms. 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller II. SALES (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, Buyer agrees to pay the price in effect at the time the purchase order is accepted by NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR Seller. Payments for Products received are due net 30 days unless otherwise stated in PURPOSE OF THE PRODUCTS. the invoice. Buyer shall have no right to set off any amounts against the amount owing in 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form respect of this invoice. originally shipped with Buyer responsible for labor charges for removal or replacement 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an Buyer after deducting transportation charges, taxes and duties, and will be allowed only amount equal to the purchase price of the Product; provided that there shall be no if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past liability for Seller or its affiliates unless Seller's analysis confirms that the Products were due amounts owing to Seller. correctly handled, stored, installed and maintained and not subject to contamination, 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum abuse, misuse or inappropriate modification. Return of any Products by Buyer must be legal rate, whichever is less, on any balance not paid within the stated terms. approved in writing by Seller before shipment. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF shall make remittance to Seller at the then current exchange rate most favorable to PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED Seller; provided that if remittance is not made when due, Buyer will convert the amount WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, to U.S. dollars at the then current exchange rate most favorable to Seller available WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL during the period between the due date and the date remittance is actually made. LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining THE PRODUCT ON WHICH LIABILITY IS ASSERTED. any government approvals regarding the importation or sale of the Products. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its 7. Taxes: All taxes, duties and other governmental charges (other than general real employees from and against all liabilities, losses, claims, costs and expenses (including property and income taxes), including any interest or penalties thereon, imposed directly attorney's fees and expenses) related to any claim, investigation, litigation or proceeding or indirectly on Seller or required to be collected directly or indirectly by Seller for the (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or manufacture, production, sale, delivery, importation, consumption or use of the Products omissions under these Terms or in any way with respect to the Products. sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. V. INFORMATION; ETC. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive Seller reserves the right to stop shipments or require satisfactory security or payment in property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way advance. If Buyer fails to make payment or otherwise comply with these Terms or any without the written permission of Seller. Buyer (at its own expense) shall indemnify and related agreement, Seller may (without liability and in addition to other remedies) cancel hold harmless Seller and defend or settle any action brought against Seller to the extent any unshipped portion of Products sold hereunder and stop any Products in transit until that it is based on a claim that any Product made to Buyer specifications infringed Buyer pays all amounts, including amounts payable hereunder, whether or not then due, intellectual property rights of another party. which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or accounts. tooling, all engineering and tooling shall remain the exclusive property of Seller. All 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer information and materials supplied by Seller to Buyer relating to the Products are indemnifies Seller fully against all costs or expenses arising in connection therewith. confidential and proprietary, and Buyer shall limit distribution thereof to its trusted 10.Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from employees and strictly prevent disclosure to any third party. causes beyond its control, including earthquakes, fires, floods, strikes or other labor 3. Performance Data: Performance data is provided as a guide in determining suitability disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, and does not constitute a warranty. It may represent the result of Seller's test conditions, delay in or lack of transportation or the requirements of any government authority. and the users must correlate it to actual application requirements. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: 4. Change In Specifications: Product specifications and descriptions may be changed at (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise any time based on improvements or other reasons. It is Seller’s practice to change part stated in writing by Seller), at which point title to and all risk of loss of the Products numbers when published ratings or features are changed, or when significant shall pass from Seller to Buyer, provided that Seller shall retain a security interest in engineering changes are made. However, some specifications of the Product may be the Products until the full purchase price is paid by Buyer; changed without any notice. (b) Delivery and shipping dates are estimates only; and 5. Errors And Omissions: The information on Seller’s website or in other documentation (c) Seller will package Products as it deems proper for protection against normal has been carefully checked and is believed to be accurate; however, no responsibility is handling and extra charges apply to special conditions. assumed for clerical, typographical or proofreading errors or omissions. 12.Claims: Any claim by Buyer against Seller for shortage or damage to the Products 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses occurring before delivery to the carrier or any claim related to pricing or other charges regarding (a) export of the Products or information provided by Seller; (b) sale of must be presented in detail in writing to Seller within 30 days of receipt of shipment. Products to forbidden or other proscribed persons or organizations; (c) disclosure to non- citizens of regulated technology or information. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY VI. MISCELLANEOUS OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING between Buyer and Seller shall operate as a waiver of rights by Seller. APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. dispute hereunder. Buyer acknowledges that it alone has determined that the Products will meet their 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller requirements of the intended use in all cases. Buyer must know and observe all relating to the Products, and no provision may be changed or waived unless in writing prohibitions of use applicable to the Product/s. signed by the parties. 2. Use with Attention: The followings are some examples of applications for which 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall particular attention must be given. This is not intended to be an exhaustive list of all not invalidate any other provision. possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. PCB Relay G5T

Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's pro- dards, codes or regulations which apply to the combination of the Product in gramming of a programmable product, or any consequence thereof. Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as vide applicable third party certification documents identifying ratings and limi- a guide for the user in determining suitability and does not constitute a war- tations of use which apply to the Product. This information by itself is not ranty. It may represent the result of Seller's test conditions, and the users must sufficient for a complete determination of the suitability of the Product in com- correlate it to actual application requirements. Actual performance is subject to bination with the end product, machine, system, or other application or use. Seller's Warranty and Limitations of Liability. Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be ticular Product with respect to Buyer's application, product or system. Buyer changed at any time based on improvements and other reasons. It is our prac- shall take application responsibility in all cases but the following is a non- tice to change part numbers when published ratings or features are changed, exhaustive list of applications for which particular attention must be given: or when significant construction changes are made. However, some specifica- (i) Outdoor use, uses involving potential chemical contamination or electrical tions of the Product may be changed without any notice. When in doubt, spe- interference, or conditions or uses not described in this document. cial part numbers may be assigned to fix or establish key specifications for (ii) Energy control systems, combustion systems, railroad systems, aviation your application. Please consult with your Seller representative at any time to systems, medical equipment, amusement machines, vehicles, safety confirm actual specifications of purchased Product. equipment, and installations subject to separate industry or government 5. Errors and Omissions. The information in this publication has been carefully regulations. checked and is believed to be accurate; however, no responsibility is assumed (iii)Use in consumer products or any use in significant quantities. for clerical, typographical or proofreading errors, or omissions. (iv)Systems, machines and equipment that could present a risk to life or 6. RoHS Compliance. Where indicated, our products currently comply, to the property. Please know and observe all prohibitions of use applicable to this best of our knowledge as of the date of this publication, with the requirements product. of the European Union's Directive on the Restriction of certain Hazardous NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS Substances ("RoHS"), although the requirements of RoHS do not take effect RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM until July 2006. These requirements may be subject to change. Please consult AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT our website for current information. THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC OMRON ON-LINE COMPONENTS LLC Global - http://www.omron.com 55 E. Commerce Drive, Suite B USA - http://www.components.omron.com Schaumburg, IL 60173 847-882-2288 Cat. No. X301-E-1 06/09 Specifications subject to change without notice Printed in USA PCB Relay G5T