G3VM-61H1 MOS FET Relays MOS FET Relays Designed for Switching Minute Signals and Analog Signals. •Continuous load current of 400 mA. RoHS compliant Note: The actual product is marked differently from the image shown here. ■Application Examples ■Terminal Arrangement/Internal Connections 6 5 4 •Semiconductor test equipment •Test & Measurement equipment OMRON logo Model name •Communication equipment Pin 1 mark 932 LOT.No. •Data loggers 1 2 3 Note:The actual product is marked differently from the image shown here. ■List of Models Load voltage Minimum package quantity Package type Contact form Terminals Model (peak value) * Number per tube Number per tape and reel 1a G3VM-61H1 75 - SOP6 Surface-mounting Terminals 60 V (SPST-NO) G3VM-61H1 (TR) - 2,500 *The AC peak and DC value are given for the load voltage. ■Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement conditions Note: 1. The dielectric strength between the input and output was LED forward current IF 50 mA checked by applying voltage between all pins as a group on ut Repetitive peak LED forward current IFP 1 A 100 µs pulses, 100 pps the LED side and all pins as a group on the light-receiving side. np LED forward current reduction rate ∆IF/°C −0.5 mA/°C Ta ≥ 25°C Connection Diagram I LED reverse voltage VR 5 V Connection temperature TJ 125 °C 1 6 Load Load voltage (ACC poennaekc/tDioCn )A VOFF 46000 V Connection A 2 5 or AC ut Clooandt icnuuroreunst CCoonnnneeccttiioonn BC IO 480000 mA CCoonnnneeccttiioonn BA :a AnCd Cpe: aDkC/DC 3 4 DC p Out ON current Connection A −4.0 1 6 Load reduction Connection B ∆IO/°C −4.0 mA/°C Ta ≥ 25°C Connection B 2 5 DC rate Connection C −8.0 3 4 Connection temperature TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms AC for 1 min 1 6 Load Ambient operating temperature Ta −40 to +85 °C With no icing or condensation Connection C 2 5 DC Ambient storage temperature Tstg −55 to +125 °C With no icing or condensation 3 4 Soldering temperature - 260 °C 10 s ■Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA ut Reverse current IR - - 10 µA VR = 5 V p n Capacity between terminals CT - 30 - pF V = 0, f = 1 MHz Note: 2. Turn-ON and Turn-OFF Times I ut TMrerasigxisgimtearun LmcEe D forwaCCroodnn nnceeuccrttiirooennn ABt RIFOTN --- 101..56 312 mΩΩA IIIOFF === 554 0mm0AA m,, IIAOO == 440000 mmAA IF 12 64 RL VVDODUT utp with output ON Connection C - 0.25 - Ω IF = 5 mA, IO = 800 mA O Current leakage when the relay is open ILEAK - - 1.0 µA VOFF = 60 V Capacity between terminals Coff - 130 - pF V = 0, f = 1 MHz IF Capacity between I/O terminals CI-O - 0.8 - pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 - - MΩ VI-O = 500 VDC, ROH ≤ 60 % Turn-ON time tON - 0.8 2.0 ms IF = 5 mA, RL = 200 Ω, VOUT 10% 90% Turn-OFF time tOFF - 0.1 0.5 ms VDD = 20 V (See note 2.) tON tOFF 1

G3VM-61H1 MOS FET Relays ■Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD - - 48 V Operating LED forward current IF 5 7.5 25 mA Continuous load current (AC peak/DC) IO - - 400 mA Ambient operating temperature Ta −20 - 65 °C ■Engineering Data LED forward current vs. Ambient Continuous load current vs. Ambient LED forward current vs. LED forward temperature temperature voltage IF - Ta IO - Ta IF - VF mA) 100 mA) 1200 mA) 100 Ta = 25°C LED forward current I (F 648000 ontinuous load current I (O 1086400000000 CCoonnnneeccttiioonn AC and B LED forward current I (F 310031 C 20 200 0.3 0 0 0.1 -20 0 20 40 60 80 100 120 -20 0 20 40 60 80 100 120 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta (°C) Ambient temperature Ta (°C) LED forward voltage VF (V) Continuous load current vs. On-state On-state resistance vs. Ambient Trigger LED forward current vs. voltage temperature Ambient temperature IO - VON RON - Ta IFT - Ta oad current I (mA)O 246000000 CITFao = n= n5 2e m5c°tAiCon A Ωesistance R ()ON 354 IICOFo ==n n54e 0mc0tA iomnA A ard current I (mA)FT 345 ItCO <o =n1 ns4e0c0t iomnA A Continuous l-2000 On-state r 2 ger LED forw 2 g -400 1 Tri 1 -600 0 0 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta (°C) Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. LED Turn ON, Turn OFF time vs. Ambient Current leakage vs. Ambient forward current temperature temperature tON, tOFF - IF tON, tOFF - Ta ILEAK - Ta µOFF time t, t (s)ONOFF 135500000000000 TVRaDL D== = 22 02500°C ΩV µOFF time t, t (s)ONOFF 31300000000 tON ent leakage I (nA)LEAK 31300 VOFF = 60 V N, Turn 300 tOFF N, Turn 100 tOFF Curr 1 O O Turn 100 Turn 30 VDD = 20 V 0.3 50 tON IRF L= = 5 2 m00A Ω 30 10 0.1 1 3 5 10 30 50 100 300 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta (°C) Ambient temperature Ta (°C) ■Safety Precautions •Refer to "Common Precautions" for all G3VM models. 2

Appearance/Dimensions SOP6 type ■Appearance SSOOPP ((SSmmaallll OOuuttlliinnee PPaacckkaaggee)) SOP6 OMRON logo Model name Pin 1 mark 932 LOT.No. Note: The actual product is marked differently from the image shown here. ■Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Weight: 0.13 g Dimensions 4.4±0.25 (Recommended Value, TOP VIEW) 6.3±0.25 2.1 max. 6 to 6.3 0.15 1.2 0.8 0.1±0.1 0.6±0.3 2.54±0.25 0.4±0.1 7.0±0.4 2.54 2.54 Note:The actual product is marked differently from the image shown here. • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation ELECTRONIC AND MECHANICAL COMPONENTS COMPANY Contact: www.omron.com/ecb Cat. No. K156-E1-01 0412(0412)(O)