MOS FET Relays G3VM-41HR Low 30-mΩ ON Resistance. Higher power, 2.5-A switching with a 40-V load voltage, SOP package. •Continuous load current of 2.5 A (connection C = 5 A). (cid:127)Dielectric strength of 1,500 Vrms between I/O. RoHS compliant ! Refer to “Common Precautions”. ■Application Examples Note: The actual product is marked differently from the image shown here. (cid:127)Broadband systems (cid:127)Measurement devices (cid:127)Data loggers (cid:127)Industrial equipment ■List of Models Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape (See note.) SPST-NO Surface-mounting 40 V G3VM-41HR 75 --- terminals G3VM-41HR(TR) --- 2,500 Note: The AC peak and DC value is given for the load voltage. ■Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-41HR 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 00..41±±00..11 7.00.±60±.40.3 Weight: 0.13 g ■Terminal Arrangement/Internal Connections (Top View) G3VM-41HR 6 5 4 1 2 3 ■Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-41HR 6 to 6.3 1.2 0.8 2.54 2.54 54

G3VM-41HR G3VM-41HR ■Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement Conditions Note: 1. The dielectric strength between the in- put and output was checked by apply- Input LED forward current IF 30 mA ing voltage between all pins as a LED forward current reduction rate ∆ IF/°C −0.3 mA/°C Ta ≥ 25°C ga rgoruopu po no nth eth eL EliDgh st-idreec aenivdin agl ls pidines. as LED reverse voltage VR 5 V Connection temperature Tj 125 °C Connection Diagram Output Load voltage (AC peak/DC) VOFF 40 V Continuous load Connection A IO 2.5 A Connection A: AC peak/DC 1 6 Load current Connection B 2.5 Connection B and C: DC Connection 2 5 or AC DC Connection C 5 A 3 4 ON current reduction Connection A ∆ IIO/°C −33.3 mA/°C Ta ≥ 50°C rate Connection B −33.3 Connection C −66.7 1 6 Load Pulse on current Iop 7.5 A t = 100 ms Connection 2 5 DC Connection temperature Tj 125 °C B 3 4 Dielectric strength between input and VI-O 1,500 Vrms AC for 1 min output (See note 1.) Operating temperature Ta −40 to +85 °C With no icing or condensation 1 6 Load Storage temperature Tstg −55 to +125 °C With no icing or condensation Connection 2 5 DC Soldering temperature (10 s) --- 260 °C 10 s C 3 4 ■Electrical Characteristics (Ta = 25°C) Item Symbol Mini- Typical Maxi- Unit Measurement mum mum conditions Input LED forward voltage VF 1.18 1.33 1.48 V IF = 10 mA Note: 2. TTuimrne-sON and Turn-OFF Reverse current IR --- --- 10 µA VR = 5 V Capacity between terminals CT --- 70 --- pF V = 0, f = 1 MHz IF 1 6 RL VDD Trigger LED forward current IFT --- 0.4 3 mA IO = 100 mA 2 4 VOUT Output Maximum resistance Connection A RON --- 0.03 0.06 Ω IF = 5 mA, IO = 2 A, t < 1S with output ON Connection B --- 0.015 0.03 Ω IF = 5 mA, IO = 2 A, t < 1S Connection C --- 0.008 --- Ω IF = 5 mA, IO = 4 A, t < 1S IF Current leakage when the relay is ILEAK --- --- 10 nA VOFF = 40 V open Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V VOUT 10% 90% Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, tON tOFF RoH ≤ 60% Turn-ON time tON --- 1.0 5.0 ms IF = 5 mA, RL = 200 Ω, Turn-OFF time tOFF --- 0.15 1.0 ms VDD = 20 V (See note 2.) ■Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 40 V Operating LED forward current IF 5 7.5 20 mA Continuous load current (AC peak/DC) IO --- --- 2 A Operating temperature Ta −20 --- 65 °C ■Engineering Data ■Safety Precautions Load Current vs. Ambient Temperature Refer to “Common Precautions” for all G3VM models. G3VM-41HR 6 A) nt ( Connection C urre 5 d c a o L 4 3 Connection A, Connection B 2 1 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 55

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: O mron: G3VM-41HR(TR) G3VM-41HR