G3VM-201G1 MOS FET Relays Ultrasensitive MOS FET Relays in 200-V Load series for electric power saving. •Trigger LED forward current of 1 mA (maximum) facilitates power saving designs and prolonged battery life. •Continuous load current of 200 mA. RoHS compliant Note: The actual product is marked differently from the image shown here. ■Application Examples ■Terminal Arrangement/Internal Connections •Communication equipment •Test & Measurement equipment 4 3 Mold pin •Security equipment mark * OMRON logo Model name •Amusement equipment Pin 1 mark 932 LOT.No. •Industrial equipment 1 2 •Various battery-driven devices Note:The actual product is marked differently from the image shown here. *The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■List of Models Load voltage Minimum package quantity Package type Contact form Terminals Model (peak value) * Number per tube Number per tape and reel 1a G3VM-201G1 100 - SOP4 Surface-mounting Terminals 200 V (SPST-NO) G3VM-201G1 (TR) - 2,500 *The AC peak and DC value are given for the load voltage. ■Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rating Unit Measurement conditions LED forward current IF 50 mA put RLEepDe ftoitriwvea rpde acku rLreEnDt froerdwuacrtdio cnu rrarteen t ΔIIFF/P°C −01. 5 mAA/° C 1T0a0 ≥ μ 2s5 p°Culses, 100 pps n I LED reverse voltage VR 5 V Connection temperature TJ 125 °C Load voltage (AC peak/DC) VOFF 200 V ut Continuous load current (AC peak/DC) IO 200 mA utp ON current reduction rate ΔIO/°C −2.0 mA/°C Ta ≥ 25°C O Pulse ON current Iop 0.6 A t = 100 ms, Duty = 1/10 Connection temperature TJ 125 °C Dielectric strength between I/O (See note 1.) VI-O 1500 Vrms AC for 1 min Note: 1. The dielectric strength between the input and Ambient operating temperature Ta −40 to +85 °C With no icing or condensation output was checked by applying voltage Ambient storage temperature Tstg −55 to +125 °C With no icing or condensation between all pins as a group on the LED side and Soldering temperature - 260 °C 10 s all pins as a group on the light-receiving side. ■Electrical Characteristics (Ta = 25°C) Item Symbol Minimum Typical Maximum Unit Measurement conditions LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA nput RCaepvaecristye b ceutwrereenn tte rminals CIRT -- 3-0 1-0 μpAF VV R= = 0 5, fV = 1 MHz Note: 2. Turn-OIFN a1nd Turn-OF4F TRimLesVDD I Trigger LED forward current IFT - 0.4 1 mA IO = 200 mA 2 3 VOUT Turn-OFF LED forward current IFC - 0.001 - mA IOFF = 100 μA ut Maximum resistance with output ON RON - 5 8 Ω IF = 2 mA, IO = 200 mA utp Current leakage when the relay is open ILEAK - 1 1000 nA VOFF = 200 V O Capacity between terminals COFF - 90 - pF V = 0, f = 1 MHz IF Capacity between I/O terminals CI-O - 0.8 - pF f = 1 MHz, VS = 0 V Insulation resistance between I/O terminals RI-O 1000 108 - MΩ VI-O = 500 VDC, ROH ≤ 60% Turn-ON time tON - 3 8 ms IF = 2 mA, RL = 200 Ω, VOUT 10% 90% Turn-OFF time tOFF - 0.6 3 ms VDD = 20 V (See note 2.) tON tOFF 1

G3VM-201G1 MOS FET Relays ■Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD - - 160 V Operating LED forward current IF - 2 25 mA Continuous load current (AC peak/DC) IO - - 160 mA Ambient operating temperature Ta −20 - 65 °C ■Engineering Data LED forward current vs. Ambient Continuous load current vs. Ambient LED forward current vs. LED forward temperature temperature voltage IF - Ta IO - Ta IF - VF A) 60 A) 250 A) 100 m m m Ta = 25 °C LED forward current I (F 23450000 ntinuous load current I (O 112050000 LED forward current I (F 110 o C 50 10 0 0 0.1 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Ambient temperature Ta (°C) Ambient temperature Ta (°C) LED forward voltage VF (V) Continuous load current vs. On-state On-state resistance vs. Ambient Trigger LED forward current vs. voltage temperature Ambient temperature IO - VON RON - Ta IFT - Ta A) 250 Ω) 7 A) 0.7 Continuous load current I (mO--11112-505050500000000 TIFa = = 2 2 m5 A°C On-state resistance R (ON 23456 IO = 200 mA ger LED forward current I (mFT 00000.....23456 tI O< = 1 s200 mA -200 1 IF = 2 mA Trig 0.1 t < 1s -250 0 0.00 -1.0 -0.5 0 0.5 1.0 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta (°C) Ambient temperature Ta (°C) Turn ON, Turn OFF time vs. LED Turn ON, Turn OFF time vs. Ambient Current leakage vs. Ambient forward current temperature temperature tON, tOFF - IF tON, tOFF - Ta ILEAK - Ta N, Turn OFF time t, t (ms)ONOFF 01.011 tON tOFF N, Turn OFF time t, t (ms)ONOFF 110 VRIFDL = D= 2 =2 m0200A ΩV ttOOFNF Current leakage I (nA)LEAK 1010.1100 VOFF = 200 V O VDD = 20 V O 0.01 Turn RTaL == 22050 ° CΩ Turn 0.01 0.1 0.001 0.1 1 10 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta (°C) Ambient temperature Ta (°C) ■Safety Precautions •Refer to "Common Precautions" for all G3VM models. 2

Appearance/Dimensions SOP4 type ■Appearance SSOOPP ((SSmmaallll OOuuttlliinnee PPaacckkaaggee)) SOP4 Mold pin mark * OMRON logo Model name Pin 1 mark 932 LOT.No. Note: The actual product is marked differently from the image shown here. * The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold. ■Dimensions (Unit: mm) Surface-mounting Terminals Actual Mounting Pad Weight: 0.1 g Dimensions 4.4±0.25 (Recommended Value, TOP VIEW) 3.9±0.2 2.1 max. 0.15 1.26 to 6.3 0.4±0.1 0.1±0.1 0.6±0.3 0.8 7.0±0.4 2.54±0.25 2.54 Note:The actual product is marked differently from the image shown here. · Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. · Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K160-E1-02 1014(0412)(O)