0.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8/FX8C Series FX8 Series FX8C Series d. e v r e s e R s ht g Ri All D. Note: that FX8 series and FX8C series are not mated with each other. T L O., Features C RIC 1. Stacking Height: 3mm to 16mm ●Stacking Height 3,4mm-FX8 Series T Stacking height of mated connectors ranges from C E 3mm to 16mm. (Fig.1.2) L E 2. SMT Coplanarity E S The coplanar tolerance at the solder area is less O R than 0.1mm. 3,4mm HI 3. Mating Guide 8 1 Built-in guide ribs and a chamfer allow for ±0.6 0 2 mm of mis-alignmet and ensures easy mating. ht Fig.1 g 4. Mis-insertion Prevention ri y p Bosses located on the bottom side of the connector ●Stacking Height 5 to 16mm-FX8C Series o C differ in position and diameter to prevent mis-orientating 8 the parts on the board. 1 0 5. Dual Connected Products 2 1. In order to enhance mounting reliability and c. e accuracy when mounting two of the same D 5 to 16mm connectors at the same time, Hirose offers the option of having two connectors attached to one another by means of a spacer. Pitch between the two connectors is 11mm. Fig.2 Ipnl ecaassee sc ownhtaecret ath ceo ampppalincya trieopnr ewsielln dteamtivaen fdo ar fhuirgthh eler vineflo orfm raetliiaobni.lity, such as automotive, 2018.6④ 1

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8 Series Product Specifications Current rating 0.4A Operating Temperature Range -55ç to +85ç (Note 1) Storage Temperature Range -10ç to +60ç(Note 2) Rating Voltage rating 100V AC Operating Humidity Range -40% to 80% Storage Humidity Range 40% to 70%(Note 2) Items Specifi cations Conditions 1. Insulation Resistance 1000Mø min 250V DC 2. Withstanding voltage No fl ashover or insulation breakdown. 300V AC/1 min 3. Contact Resistance 45mø max. 100mA Frequency : 10 to 55Hz, single amplitude of 0.75mm, 4. Vibration No electrical discontinuity of 1µs or more 2 hours in each of the 3 axis directions. Contact resistance : 55mø max. : Insulation 5. Humidity (Steady state) 96 hours at 40ç and humidity of 90% to 95% d. resistance : 100Mø min. e v Contact resistance : 55mø max. : Insulation (-55ç : 30 minutes, 15 to 35ç : 2 to 3 minutes er 6. Temperature Cycle s resistance : 100Mø min. 85ç : 30 minutes, 15 to 35ç : 2 to 3 minutes) 5 cycles e R 7. Mating Cycles Contact resistance : 55mø max. 50 cycles hts 8. Resistance to Soldering No deformation of components affecting Refl ow : At the recommended temperature profi le g heat performance. Manual soldering : 360ç for 5 seconds Ri All NNoottee 12 :: I Tnhcelu tdeerms t"esmtopraegrea"tu rreefe rriss eto c paruosdeudc tbsy s tcourrerde nfot rfl loowng. period of time prior to mounting and use. Operating Temperature Range D. and Humidity range includes the non conducting condition in storage, shipment or during transportation. T L O., Material / Finish C C Part Material Finish Remarks RI Insulator PPS Light brown UL94V-0 T C Contact area Gold plated E Header Contact ––––––– Lead area Tin (Note 2) L Phosphor bronze E Contact area E Receptacle Contact Gold plated ––––––– S Lead area O Note 1 : Slight color difference to the resin may occur. This will not affect fi t, form or function of the connector. R HI Note 2 : FX8-*P-SV is gold plated. 8 1 0 2 ■Product Number Structure ht g Refer to the chart below when determining the product specifications from the product number. yri Please select from the product numbers listed in this catalog when placing orders. p o C Single Product Mating Sectional View 8 1 FX8 - 120 P - SV 1 (92) 0 2 c.1. 1 2 3 4 5 6 e D q Series Name : FX8 w No. of contacts : 60, 80, 90, 120, 140 e Connector type P : Header S : Receptacle r Contact type SV : Board vertical type t Product height variation : none= standard (minimum low profile) 1 : +1mm y Package Form None, (71) : Tray package product (21), (91) : Tube packaging product (22), (92) : Emboss tape package product (The above illustration represents the stacking height 3mm type.) BStacking Height Variation ●Single Product 4 o FX8-**P-SV FX8-**P-SV1 3 t FX8-**S-SV 3mm 4mm 2

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors Header A±0.3 B+0.05 _0.2 [FX8-**P-SV] C+0.05 _0.2 D±0.2 0.6±0.1 06.5_0.35.1±0.3 (C1) 0.254) Polarization mark 45±(0. 2. (Ø0.9) t0.2±0.03∞w0.25±0.03 (Ø0.6) 2-(C0.2) (1.5) 75) E±0.1 0. (2.4) (2.4) ( d. e v r e s Unit : mm e R s Part No.** HRS No. No. of contacts A B C D E RoHS ht FX8-60P-SV(**) 578-0001-6 ** 60 24.60 23.00 20.70 17.40 22.20 g Ri FX8-80P-SV(**) 578-0003-1 ** 80 30.60 29.00 26.70 23.40 28.20 All FX8-90P-SV(**) 578-0004-4 ** 90 33.60 32.00 29.70 26.40 31.20 D. Yes FX8-100P-SV(**) 578-0005-7 ** 100 36.60 35.00 32.70 29.40 34.20 T L O., FX8-120P-SV(**) 578-0006-0 ** 120 42.60 41.00 38.70 35.40 40.20 C FX8-140P-SV(**) 578-0007-2 ** 140 48.60 47.00 44.70 41.40 46.20 RIC ** 71 : Tray packaging, 91 : Tube packaging, 92 : Embossed tape packaging Note 1 : Please place orders in full magazine/tube quantities. T C Note 2 : Reels are sold containing 1,000 pcs/reel. Please refer to the delivery form on page 6 for details. E L Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. E E S O R 8 HI [FX8-***P-SV1] AB±+_000...0235 1 C+0.05 0 _0.2 2 ht 0.6±0.1 D±0.2 g ri y 018 Cop 06.5_0.3±0.255.1±0.30.4) (1) Polarization mark 2 5( 1. 3.4 Dec. 75) (Ø0.9) t0E.2±±00.1.03∞w0.25±0.03 (Ø0.6) 2-(C0.2) (1.5) (0. (2.4) (2.4) Unit : mm Part No.** HRS No. No. of contacts A B C D E RoHS FX8-60P-SV1(**) 578-0041-0 ** 60 24.60 23.00 20.70 17.40 22.20 FX8-80P-SV1(**) 578-0043-6 ** 80 30.60 29.00 26.70 23.40 28.20 FX8-90P-SV1(**) 578-0044-9 ** 90 33.60 32.00 29.70 26.40 31.20 Yes FX8-100P-SV1(**) 578-0045-1 ** 100 36.60 35.00 32.70 29.40 34.20 FX8-120P-SV1(**) 578-0046-4 ** 120 42.60 41.00 38.70 35.40 40.20 FX8-140P-SV1(**) 578-0047-7 ** 140 48.60 47.00 44.70 41.40 46.20 ** 71 : Tray packaging, 91 : Tube packaging, 92 : Embossed tape packaging Note 1 : Please place orders in full magazine/tube quantities. Note 2 : The embossed tape packaged parts are available for all pin counts, except the 140 pin count. Reels are sold containing 1,000 pcs/reel. Please refer to the delivery form on page 15 for details. Note 3 : P lease note that tray packaged parts are not suitable for use with automatic mounting processes. 3

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors Receptacle A±0.3 B+0.2 [FX8-**S-SV] 0 C+0.2 0 (1) D±0.2 0.6±0.1 3 07_0.36±0. 5. Polarization mark (Back side) 5 2 0. ± 2.255) (Ø0.9) t0.E2±±00..013∞w0.25±0.03 (Ø0.6) 2-(C0.2) (1.8) 7 0. (2.4) (2.4) ( d. e v r e s e Unit : mm R s Part No.** HRS No. No. of contacts A B C D E RoHS ht g FX8-60S-SV(**) 578-0201-5 ** 60 24.60 23.05 20.80 17.40 22.20 Ri All FX8-80S-SV(**) 578-0203-0 ** 80 30.60 29.05 26.80 23.40 28.20 D. FX8-90S-SV(**) 578-0204-3 ** 90 33.60 32.05 29.80 26.40 31.20 Yes T FX8-100S-SV(**) 578-0205-6 ** 100 36.60 35.05 32.80 29.40 34.20 L O., FX8-120S-SV(**) 578-0206-9 ** 120 42.60 41.05 38.80 35.40 40.20 C FX8-140S-SV(**) 578-0207-1 ** 140 48.60 47.05 44.80 41.40 46.20 C RI ** None : Tray packaging, 21 : Tube packaging, 22 : Embossed tape packaging T Note 1 : Please place orders in full magazine/tube quantities. C E Note 2 : Reels are sold containing 1,000 pcs/reel. Please refer to the delivery form on page 6 for details. L E Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. E S O R HI 8 1 0 2 ht PCB Mounting Pattern g ri y p o Header Receptacle C 8 1 0 2 1. c. e D ・Recommended metal mask thickness : t = 0.15mm ・If the inside (the connector mounting lower side) of the SMT portion is not ・Recommended metal mask thickness : t = 0.15mm treated with the insulation tape and so on, the area is specifi ed as a pattern prohibited area. 4

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors Connector Precautions for use 1. Tolerance Clearance on the Mating Side The effective contact length of the product is set to 0.7mm. Please make sure there is less than 0.2mm clearance between the header and receptacle during mating. 2. Support between the PCBs Please be sure to fix the boards to each other with screws or other means of support. Do not use only the mated connector to support the boards. 3. Stacking Height Tolerance for Mating d. Stack 3mm 3 +_00..32 mm e v r se Stack 4mm 4 +0.3 mm e _0.2 R s ht Note : Please Note that the above stacking tolerance doesn't include the solder paste thickness. g Ri 4. Multiple mounting on same PCB is not recommended in principle All D. 5. Mounting Temperature Profile (Reference) T L O., 260 (MAX 250ç) HRS test conditions C 240 Test board Glass epoxy 161mm∞100mm∞1.6mm thick RIC 220 220ç Solder method : Reflow T 200ç Solder composition : Paste, 96.5%Sn/3%Ag/0.5%Cu C 200 E Metal mask : 0.15mm thick L 180 E e Reflow cycles : 2 cycles E atur 160 S er 150ç O p 140 m The temperature profile is based on the above R e HI T conditions. (ç) 8 In individual applications the actual temperature 1 0 may vary, depending on solder paste type, volume/ 2 ht 0 90 to 120s MAX 60s thickness and board size/thickness. Consult your g ri Pre-heating time Soldering Time solder paste and equipment manufacturer for y (150 to 200ç) (220ç min.) p specific recommendations. o C Time (Second) 8 1 0 2 1. c. e D 5

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors Packaging Type 60 80 90 100 120 140 Packaging Type No. of contacts contacts contacts contacts contacts contacts contacts Pieces per tube 21 pcs 17 pcs 15 pcs 14 pcs 12 pcs 10 pcs Tube packaging Sales unit Per tube. Please place orders in full magazine/tube quantities. Tube Total Length 550mm±2mm Tape Width 44mm 44mm 44mm 56mm 56mm 72mm Product Pitch 12mm Embossed Tape Embossed Reel diameter Refer to the table on catalog page 6. Packaging Pieces per reel 1000 pcs/reel Sales unit Per reel d. e ** The chart above applies only to individual connectors. v er Dual connected products are packaged and shipped in trays only. s e R s ht Packaging Specifi cation g Ri [Tube packaging] All D. Header Receptacle T [FX8-**P-SV (91)] [FX8-**S-SV (21)] L O., [FX8- **P-SV1 (91)] C C RI 550±2 (7.2) 550±2 (5.2) T C E 7) 8) L 9. 9. E ( Polarity mark ( E Marking Marking Polarity mark S O R HI 8 1 0 [Embossed Tape Package] 2 ht g Embossed Carrier Tape Dimensions Reel Dimensions (FREE) ri y p o C 8 D C 12 Unreeling direction 2 44.4[56.4][72.4] 201 0.4 2 4 Ø1.5 75 Ø13 1. 1. c. De 34.2] EØ80 2][ 20.2 [26.0.4 [52.4][68.4]44 [56][72] Tesrmecintiaotnion(The pErondduc tC inocnlutdaecst 1a0r0e0 apieces.)Installa(4tio0n0 amrema: mLeiand.e)r area 4 7) 1. ( Space Emboss tape Space Cover tape 1.5 A (More than 10 pockets) (10 pockets min.) B *The figure above shows the receptacle in its pocket. Unit : mm P/S Part No. A B C D E FX8-**P-SV (92) 3.2 Ø 330 Header 5.5 7.9 FX8-**P-SV1 (92) 4.2 12 (Note 1) Receptacle FX8-**S-SV (22) 6.0 8.4 2.6 Ø 330 ** : No. of contacts Note 1 : Ø 330 are for 60, 80 and 90 contacts. Ø 360 are for 100, 120 and 140 contacts. 6

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors FX8C Series Product Specifications Rated current : 0.4A Operation temperature range : -55 to +85°C (Note 1) Storage temperature range : -10 to +60°C (Note 2) Ratings Rated voltage : AC 100V Operation humidity range : 40 to 80% Storage humidity range : 40 to 70% (Note 2) Items Specifi cations Conditions 1. Insulation resistance Min of 100Mø Measured at 250 V DC 2. Withstand voltage No fl ashover or dielectric breakdown. 300V AC for 1 minute 3. Contact resistance Max of 80Mø Measured at 100 mA No electrical discontinuity lasting for a min 10 to 55Hz, half amplitude : 0.75mm, 4. Vibration proof of 1μs. 3 axis directions, 10 cycles each. Contact resistance : a max of 100mø ; Left for 96 hours at the temperature of 40 ±2°C 5. Moisture resistance Insulation resistance : a min of 100Mø and the humidity of 90 to 95% ed. Contact resistance : a max of 100mø ; (-55°C for 30 minutes → 15 to 35°C for 2 to 3 minutes → 85°C rv 6. Temperature cycle Insulation resistance : a min of 100ø for 30 minutes → 15 to 35°C for 2 to 3 minutes) in 5 cycles e es 7. Mating cycles Contact resistance : a max of 100mø 50 times R 8. Soldering heat No dissolution of the resin affecting Reflow : With recommended temperature profile, at s ht resistance performance. the soldering iron temperature of 350°C for 5 seconds g Ri Note 1 : Includes the temperature rise caused by current fl ow. All Note 2 : Storage as described here represents the long-term-storage status of unused items before they are mounted on PCB. D. Operation humidity range applies to the unpowered status after the items are mounted on PCB. Note 3 : The contact resistance noted above is measured using a connector combination with a 16mm stack height. T L O., Material / Finish C C Part name Material Treatment Remarks RI Insulator PPS resin Light brown UL94V-0 T C Contact area Gold plating E Header contact ––––––– Lead area Pure tin plating (Note 2) EL Phosphor bronze Contact area Gold plating E Receptacle contact ––––––– S Lead area Pure tin plating (Note 2) O Note 1 : Black dots or other color irregularities may occur in the insulator resin. In addition, the color may change if exposed to R HI sunlight or fl orescent light. But this does not affect the quality or performance. 8 Note 2 : FX8C-*P-SV (*) and FX8C-*S-SV are gold plated. 1 0 2 ht ■Product Number Structure g ri y Refer to the chart below when determining the product specifications from the product number. p o Please select from the product numbers listed in this catalog when placing orders. C 8 ●Single Product 1 FX8C - 120 P - SV 1 (91) 0 2 1. 1 2 3 4 5 6 c. De t Variable product height : None : Standard (Minimum height product) q Series name : FX8C 1 : +1mm 6 : +6mm w No. of contacts : 60, 80, 100, 120, 140 y Packaged state (71) : Tray packaging e Connector type : P : Header (68), (91) : Magazine/tube packaging S : Receptacle (92) : Embosses tape packaging r Contact form : SV : Vertical PCB type (93) : Vacuum tape, embosses tape packaging ●Two-connected products FX8C - 120/120 P 11 - SV 1 J 1 2 3 4 5 6 7 q Series name : FX8C r Pitch between dual connected products t Contact form : SV : Vertical PCB type w No. of contacts : 60∞2, 80∞2, 100∞2, 120∞2, 140∞2 y Variable product height : None : Standard (Minimum height product) Example : 120/120=240 contacts 1 : +1mm 6 : +6mm u J : Dual connected product e Connector type : P : Header S : Receptacle *Dual connected products are packed in trays as the standard delivery method. 7

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors Stacking Height Variations Receptacle FX8C-**S-SV FX8C-**S-SV5 Header FX8C-**/**S11-SVJ FX8C-**/**S11-SV5J FX8C-**P-SV 5mm 10mm FX8C-**/**P11-SVJ FX8C-**P-SV1 6mm 11mm FX8C-**/**P11-SV1J 6 1 FX8C-**P-SV2 o FX8C-**/**P11-SV2J 7mm 12mm 5 t FX8C-**P-SV4 9mm 14mm FX8C-**/**P11-SV4J FX8C-**P-SV6 11mm 16mm d. FX8C-**/**P11-SV6J e v r e s e ** R ** ** s ht g Ri All **** ** D. T L C CO., Effectivemating length E ELECTRI (2)Effective mating length (Stacking height) (2) S O R HI 8 1 0 2 ht **** ** g ri y p ** o ** ** C 8 1 0 2 1. c. e D 8

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors A±0.25 B+– 00..025 Header (Single Product) C+– 00..025 D±0.2 P±0.6±0.1 [FX8C-**P-SV] 06.5_0.35.1±0.3 (C1) 4) Polarity mark 0. ( 4.45±0.25 (Ø0.9) t0.2±0.03∞w0.25±0.03 (Ø0.6) 2-(C0.2) (1.5) 5) E±0.1 7 (0. (2.4) (2.4) Unit : mm d. Part No. HRS No. No. of contacts A B C D E RoHS e FX8C-60P-SV(**) 578-0501-9 ** 60 24.60 23.00 20.70 17.40 22.20 v r e FX8C-80P-SV(**) 578-0503-4 ** 80 30.60 29.00 26.70 23.40 28.20 s e FX8C-100P-SV(**) 578-0505-0 ** 100 36.60 35.00 32.70 29.40 34.20 Yes R s FX8C-120P-SV(**) 578-0506-2 ** 120 42.60 41.00 38.70 35.40 40.20 ht FX8C-140P-SV(**) 578-0507-5 ** 140 48.60 47.00 44.70 41.40 46.20 g Ri Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. All Note 2 : Please place orders in full magazine/tube quantities. D. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. T L O., A±0.3 C C [FX8C-**P-SV1] DCB±++–– 00000....0022.552 RI [FX8C-**P-SV2] P=0.6±0.1 ECT [FX8C-**P-SV4] 06.5_0.35.1±0.3 E EL [FX8C-**P-SV6] (0.4) (C1) Polarity mark S O 25 R ±0. HI F 2018 (0.75) (Ø0(.29.)4) E±0.t10.2±0.03∞w0.25±0.03 (Ø0.6) (2.4) 2-(C(01.2.5)) ht g ri y p o Unit : mm C 8 Part No. HRS No. No. of contacts A B C D E F RoHS 1 FX8C-60P-SV1(**) 578-0521-6 ** 5.45 0 2 FX8C-60P-SV2(**) 578-0541-3 ** 6.45 1. 60 24.60 23.00 20.70 17.40 22.20 c. FX8C-60P-SV4(**) 578-0581-8 ** 8.45 e FX8C-60P-SV6(**) 578-0601-3 ** 10.45 D FX8C-80P-SV1(**) 578-0523-1 ** 5.45 FX8C-80P-SV2(**) 578-0543-9 ** 6.45 80 30.60 29.00 26.70 23.40 28.20 FX8C-80P-SV4(**) 578-0583-3 ** 8.45 FX8C-80P-SV6(**) 578-0603-9 ** 10.45 FX8C-100P-SV1(**) 578-0525-7 ** 5.45 FX8C-100P-SV2(**) 578-0545-4 ** 6.45 100 36.60 35.00 32.70 29.40 34.20 Yes FX8C-100P-SV4(**) 578-0585-9 ** 8.45 FX8C-100P-SV6(**) 578-0605-4 ** 10.45 FX8C-120P-SV1(**) 578-0526-0 ** 5.45 FX8C-120P-SV2(**) 578-0546-7 ** 6.45 120 42.60 41.00 38.70 35.40 40.20 FX8C-120P-SV4(**) 578-0586-1 ** 8.45 FX8C-120P-SV6(**) 578-0606-7 ** 10.45 FX8C-140P-SV1(**) 578-0527-2 ** 5.45 FX8C-140P-SV2(**) 578-0547-0 ** 6.45 140 48.60 47.00 44.70 41.40 46.20 FX8C-140P-SV4(**) 578-0587-4 ** 8.45 FX8C-140P-SV6(**) 578-0607-0 ** 10.45 Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : For FX8C-**P-SV6 connectors, there is a spacer attached between the leads. Please request the specific drawing for clarification. Note 4 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. 9

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors A±0.3 B+00.2 Receptacle (Single Product) (C1) DC±+000..22 P=0.6±0.1 [FX8C-**S-SV] 07_0.35.6±0.3 Polarity mark (back) 3.95±0.2575) (Ø0.9) t0.2±0.03E∞±w0.01.25±0.03 (Ø0.6) 2-(C0.2) (1.8) 0. ( (2.4) (2.4) Unit : mm Part No. HRS No. No. of contacts A B C D E RoHS FX8C-60S-SV(**) 578-0801-2 ** 60 24.60 23.05 20.80 17.40 22.20 d. FX8C-80S-SV(**) 578-0803-8 ** 80 30.60 29.05 26.80 23.40 28.20 e v FX8C-100S-SV(**) 578-0805-3 ** 100 36.60 35.05 32.80 29.40 34.20 Yes r se FX8C-120S-SV(**) 578-0806-6 ** 120 42.60 41.05 38.80 35.40 40.20 e R FX8C-140S-SV(**) 578-0807-9 ** 140 48.60 47.05 44.80 41.40 46.20 s Note 1 : Embossed tape packaging product are sold in full reel quantities. For details, see the item showing delivery forms in Page 16. ht g Note 2 : Please place orders in full magazine/tube quantities. Ri Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. All D. T L A±0.3 O., CB++0000..22 C D±0.2 C (C1) P=0.6±0.1 CTRI [FX8C-**S-SV5] 07_0.35.6±0.3 E Polarity mark (back) L E 25 E ±0. S 95 O 8. HIR 0.75) (Ø0.9) t0.2±E0±.003.1∞w0.25±0.03 (Ø0.6) 2-(C0.2) (1.8) 8 ( 1 0 ht 2 (2.4) (2.4) Unit : mm g Part No. HRS No. No. of contacts A B C D E RoHS ri y FX8C-60S-SV5(**) 578-0821-0 ** 60 24.6 23.05 20.8 17.4 22.2 p o FX8C-80S-SV5(**) 578-0823-5 ** 80 30.6 29.05 26.8 23.4 28.2 C 8 FX8C-100S-SV5(**) 578-0825-0 ** 100 36.6 35.05 32.8 29.4 34.2 Yes 1 FX8C-120S-SV5(**) 578-0826-3 ** 120 42.6 41.05 38.8 35.4 40.2 0 2 FX8C-140S-SV5(**) 578-0827-6 ** 140 48.6 47.05 44.8 41.4 46.2 1. c. Note 1 : Embossed tape packaging product are sold in full reel quantities. e D For details, see the item showing delivery forms in Page 16. Note 2 : Please place orders in full magazine/tube quantities. Note 3 : Please note that tray packaged parts are not suitable for use with automatic mounting processes. BRecommended PCB layout and metal mask dimensions for single connector (mounting side) Header Receptacle [FX8C-**P-SV*] [FX8C-**S-SV, SV5*] Polarity mark position Polarity mark position *Recommended metal mask thickness : t = 0.15mm * The inside of SMT land (bottom of the connector being mounted) will be a patterning restricted area if no treatment such as insulation tape is applied. *Recommended metal mask thickness : t = 0.15mm (FX8C-**S-SV, SV5 are not applicable.) 10

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors A±0.3 B±0.3 Header (Dual Connected Product) CD++––0000....002255 E±0.2 [FX8C-**/**P11-SVJ] (16.1)(11) 5) Polarity mark 3 3. ( F±0.1 (4.5) Unit : mm Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-60/60P11-SVJ(71) 578-0651-1 71 60×2 31.70 24.70 23.00 20.70 17.40 22.20 d. FX8C-80/80P11-SVJ(71) 578-0653-7 71 80×2 37.70 30.70 29.00 26.70 23.40 28.20 e v FX8C-100/100P11-SVJ(71) 578-0655-2 71 100×2 43.70 36.70 35.00 32.70 29.40 34.20 Yes r e FX8C-120/120P11-SVJ(71) 578-0656-5 71 120×2 49.70 42.70 41.00 38.70 35.40 40.20 s Re FX8C-140/140P11-SVJ(71) 578-0657-8 71 140×2 55.70 48.70 47.00 44.70 41.40 46.20 s Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. ht g Ri All D. LT [FX8C-**/**P11-SV1J] A±0.3 O., [FX8C-**/**P11-SV2J] BC±+–000..02.53 C D+–00..025 E±0.2 C [FX8C-**/**P11-SV4J] RI CT [FX8C-**/**P11-SV6J] (16.1)(11) E L Polarity mark E E G) S ( O F±0.1 (4.5) R HI 8 1 0 2 ht Unit : mm g ri No. of y Part No. HRS No. A B C D E F G H RoHS p contacts o C FX8C-60/60P11-SV1J(71) 578-0671-9 71 4.35 5.45 8 FX8C-60/60P11-SV2J(71) 578-0691-6 71 5.35 6.45 1 60×2 31.70 24.70 23.00 20.70 17.40 22.20 0 FX8C-60/60P11-SV4J(71) 578-0731-9 71 7.35 8.45 2 1. FX8C-60/60P11-SV6J(71) 578-0751-6 71 9.35 10.45 c. e FX8C-80/80P11-SV1J(71) 578-0673-4 71 4.35 5.45 D FX8C-80/80P11-SV2J(71) 578-0693-1 71 5.35 6.45 80×2 37.70 30.70 29.00 26.70 23.40 28.20 FX8C-80/80P11-SV4J(71) 578-0733-4 71 7.35 8.45 FX8C-80/80P11-SV6J(71) 578-0753-1 71 9.35 10.45 FX8C-100/100P11-SV1J(71) 578-0675-0 71 4.35 5.45 FX8C-100/100P11-SV2J(71) 578-0695-7 71 5.35 6.45 100×2 43.70 36.70 35.00 32.70 29.40 34.20 Yes FX8C-100/100P11-SV4J(71) 578-0735-0 71 7.35 8.45 FX8C-100/100P11-SV6J(71) 578-0755-7 71 9.35 10.45 FX8C-120/120P11-SV1J(71) 578-0676-2 71 4.35 5.45 FX8C-120/120P11-SV2J(71) 578-0696-0 71 5.35 6.45 120×2 49.70 42.70 41.00 38.70 35.40 40.20 FX8C-120/120P11-SV4J(71) 578-0736-2 71 7.35 8.45 FX8C-120/120P11-SV6J(71) 578-0756-0 71 9.35 10.45 FX8C-140/140P11-SV1J(71) 578-0677-5 71 4.35 5.45 FX8C-140/140P11-SV2J(71) 578-0697-2 71 5.35 6.45 140×2 55.70 48.70 47.00 44.70 41.40 46.20 FX8C-140/140P11-SV4J(71) 578-0737-5 71 7.35 8.45 FX8C-140/140P11-SV6J(71) 578-0757-2 71 9.35 10.45 Note 1 : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. Note 2 : For FX8C-**/**P11-SV6J connectors, there is a spacer attached between the leads. Please request the specifi c drawing for clarifi cation. 11

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors A±0.3 B±0.3 ■Receptacle (Dual Connected Product) C+00.2 D+00.2 E±0.2 [FX8C-**/**S11-SVJ] (16.6)(11) 4) Polarity mark (back) 3. ( F±0.1 (4) Unit : mm Part No. HRS No. No. of contacts A B C D E F RoHS FX8C-60/60S11-SVJ(71) 578-0901-7 71 60×2 31.70 24.60 23.05 20.80 17.40 22.20 d. FX8C-80/80S11-SVJ(71) 578-0903-2 71 80×2 37.70 30.60 29.05 26.80 23.40 28.20 e v FX8C-100/100S11-SVJ(71) 578-0905-8 71 100×2 43.70 36.60 35.05 32.80 29.40 34.20 Yes r e s FX8C-120/120S11-SVJ(71) 578-0906-0 71 120×2 49.70 42.60 41.05 38.80 35.40 40.20 e R FX8C-140/140S11-SVJ(71) 578-0907-3 71 140×2 55.70 48.60 47.05 44.80 41.40 46.20 hts Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. g Ri All D. T L [FX8C-**/**S11-SV5J] A±0.3 O., CB±+000..23 C D+00.2 C E±0.2 RI CT 16.6)(11) E ( L E Polarity mark (back) E 4) S 8. O ( F±0.1 (4) R HI 8 1 0 2 ht Unit : mm g ri Part No. HRS No. No. of contacts A B C D E F RoHS y p FX8C-60/60S11-SV5J(71) 578-0921-4 71 60×2 31.70 24.60 23.05 20.80 17.40 22.20 o C FX8C-80/80S11-SV5J(71) 578-0923-0 71 80×2 37.70 30.60 29.05 26.80 23.40 28.20 8 FX8C-100/100S11-SV5J(71) 578-0925-5 71 100×2 43.70 36.60 35.05 32.80 29.40 34.20 Yes 1 0 FX8C-120/120S11-SV5J(71) 578-0926-8 71 120×2 49.70 42.60 41.05 38.80 35.40 40.20 2 1. FX8C-140/140S11-SV5J(71) 578-0927-0 71 140×2 55.70 48.60 47.05 44.80 41.40 46.20 ec. Note : Dual connected products are packaged and shipped in trays. And as such, are not suitable for use with automatic mounting processes. D BRecommended PCB layout and metal mask dimensions for dual connected products (mounting side) Header Receptacle [FX8C-**/**P 11-SVJ, SV1J] [FX8C-**/**S 11-SVJ, SV5J] Polarity mark position Polarity mark position *Recommended metal mask thickness: t = 0.15mm * The inside of SMT land (bottom of the connector being mounted) *Recommended metal mask thickness : 0.15mm will be a patterning restricted area if no treatment such as insulation tape is applied. (FX8C-**/**S11-SV5J is not applicable.) 12

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors BDetailed drawing on dual connected products after the spacers are removed (individual connector from dual connected product) Header Polarity mark Polarity mark d. e v r e s e R s ht g Ri All D. T L O., Receptacle C C RI T C E L E E S O Polarity mark (back) R Polarity mark (back) HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 13

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors B How to Use the Connector 1. Permissible gap between mating surfaces The effective mating length of this product is 2.0mm. Please make sure that the gap between the header and receptacle when mated will be 1.2mm or less. 2. Fixation between mounted PCBs If the connector is secured to the board with only other connectors, please make sure that no vibrations or impact will occur. 3. Tolerances in stacking height when mated Stack Amm A +0.3 mm −0.2 d. Note: P lease note that the thickness of solder cream is not taken into account for the above tolerances in e v stacking height. r e s 4. Using dual connected products e R s Dual connected products are fixed with spacers on both longitudinal sides. However, the products cannot ht be mated in that state. Please make sure to remove the spacers before mating. (Please do not remove the Rig spacers before mounting on PCB.) All D. Csopuapcleerr s (joint) T L O., C C RI T C Before removing the joint bar After removing the joint bar E Note : Please use dual-connected products for multiple mounting. L E However, multiple mounting of dual-connected products are not recommended. E S O 5. Temperature profile for mounting (reference) R HI <Applicable conditions> 8 260 (Peak temperature : Max 250ç) 1 Reflow with infrared light and heat 0 240 Reflow method 2 (SENSBEY NR-II) ht 220 220ç Environment in the g 200ç Ambient air ri 200 reflow furnace y 018 Cop erature (ç) 111684000 150ç Solder C((mFMraleu7nax0um 5cfa- o2tcyn2tptu1aerCie n(dMeS dbn5 y--a34 mSA2eo-g1nu-0j0nu..t 55 M: C 1eu1ta) Wl t%) 2 p 1. em Industry Co., Ltd.) c. T Size 161 ∞ 100 ∞ 1.6mm e PCB D Material : Glass epoxy 0 Metal mask thickness Thickness : 0.15mm (90 to 120 seconds) Within 60 seconds Preheating period Soldering period Note 1 : This temperature profi le shows recommended values. (150 to 200ç) (a minimum of 220ç) Temperature should be measured on the top of the connector. Note 2 : The refl ow process should be limited to two times. Note 3 : Results may differ depending on the type and manufacturer of solder cream, PCB size, mounting materials and other conditions. Please be sure to 6. Usage Recommendations confi rm the mounting conditions before use. This product has been thin-formed for minimization. Care should be taken that excessive prying mating/unmating could cause damage and contact failure. 14

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors B Form of Delivery Packaging style No. of contacts 60 contacts 80 contacts 100 contacts 120 contacts 140 contacts Product quantity 21 pieces 17 pieces 14 pieces 12 pieces 10 pieces Magazine packaging Sales unit Please place orders in full magazine/tube quantities. Overall magazine length 550mm ± 2mm Tape width (JIS) 44 56 72 Product pitch (12mm) Embossed tape packaging Embossed reel diameter Please see the table shown in Page 16 of this catalog. Product quantity Please see the table shown in Page 16 of this catalog. Sales unit Full reels. Please see the table shown in page 16 of this catalog. * *The chart above applies only to individual connectors. Dual connected products will be packaged and delivered in trays. d. e v r e s e R s BPackaging Specifi cation ht g Ri All [Magazine Packaging] D. ●Header T L [FX8C-**P-SV(91)] O., [FX8C-**P-SV1(91)] C C [FX8C-**P-SV2(91)] RI [FX8C-**P-SV4(91)] Polarity mark T C [FX8C-**P-SV6(91)] Marking E L E E S O R HI 8 1 0 ●Receptacle 2 ht [FX8C-**S-SV(68)] Polarity mark g ri [FX8C-**S-SV5(91)] y p o C 8 Marking Polarity mark (back) 1 0 2 1. c. e D P/S Part No. A FX8C-**P-SV(91) 9 FX8C-**P-SV1(91) 10 Header FX8C-**P-SV2(91) 11 FX8C-**P-SV4(91) 13 FX8C-**P-SV6(91) 15 FX8C-**S-SV(68) 7.4 Receptacle FX8C-**S-SV5(91) 12.4 15

FX8/FX8C Series●0.6mm Pitch Stacking Height 3mm to 16mm Connectors [Embossed Tape Packaging] ● Carrier Dimensions ●Reel Dimensions Unreeling direction 12 Reel dimensions 2 4 Ø1.5 75 D C 0.4 or 0.5 2]1. Ø13 Ø21 2 44.4[56.4][72.4] 4. 3 26.2][4] E801* 20.2 [2.4] [68.56] [72] Ø ed. 0.4 [544 [ Termination Attachment Leader (400 mm or longer) v 4 ser +0.150 e 7 R 1. hts 1.5 A g B Cavity Embossed tape Cavity Cover tape Ri (10 pockets or more) (10 pockets or more) All D. T L * The figure above shows FX8 receptacles packaged on a *1 For FX8C-140S-SV(92), E dimension is 370 in diameter O., embossed tape. Dimensions shown in brackets [ ] are those and core dimension is 100 in diameter. C for tape widths of 56mm or 72mm. *2 For FX8C-120P-SV2(92), FX8C-120S-SV5(92), and C FX8C-140S-SV5(92), E dimension is 380 in diameter. RI T Note : Some products are not available packaged on an embossed tape. C E Please be sure to clarify the packaging type before you order. L E Unit : mm E S P/S Part No. A B C D E Product O quantity R HI FX8C-**P-SV(92) 5.5 7.9 5.2 1.2 Ø370 1000 pcs/reel 8 FX8C-**P-SV1(92) 5.5 7.9 6.2 1.2 Ø370 1000 pcs/reel 01 Header FX8C-**P-SV2(92) 5.5 7.9 7.2 1.2 Ø330 500 pcs/reel *2 ht 2 FX8C-**P-SV4(92) 5.5 7.9 9.2 1.2 Ø370 500 pcs/reel g FX8C-**P-SV6(92) 5.5 7.9 11.2 1.2 Ø370 500 pcs/reel yri FX8C-**S-SV(92) 6.0 8.4 4.3 1.2 Ø330 1000 pcs/reel *1 p Receptacle o FX8C-**S-SV5(92) 6.0 8.4 9.3 1.2 Ø370 500 pcs/reel *2 C 8 ** : No. of contacts 1 0 2 1. c. e D ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. 16 The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements. Powered by TCPDF (www.tcpdf.org)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H irose Electric: FX8C-120P-SV4(91) FX8C-60P-SV(71) FX8C-60P-SV(91) FX8C-60P-SV(92) FX8C-60P-SV(93) FX8C-80P-SV(71) FX8C-80P-SV(91) FX8C-80P-SV(92) FX8C-80P-SV(93) FX8C-100P-SV(71) FX8C-100P-SV(91) FX8C-100P- SV(92) FX8C-100P-SV(93) FX8C-120P-SV(71) FX8C-120P-SV(91) FX8C-120P-SV(92) FX8C-140P-SV(71) FX8C- 140P-SV(91) FX8C-140P-SV(92) FX8C-60P-SV1(71) FX8C-60P-SV1(91) FX8C-60P-SV1(92) FX8C-60P-SV1(93) FX8C-80P-SV1(71) FX8C-80P-SV1(91) FX8C-80P-SV1(92) FX8C-100P-SV1(71) FX8C-100P-SV1(91) FX8C-100P- SV1(92) FX8C-100P-SV1(93) FX8C-120P-SV1(71) FX8C-120P-SV1(91) FX8C-120P-SV1(92) FX8C-140P-SV1(71) FX8C-140P-SV1(91) FX8C-140P-SV1(92) FX8C-60P-SV2(71) FX8C-60P-SV2(91) FX8C-60P-SV2(92) FX8C-60P- SV2(93) FX8C-80P-SV2(71) FX8C-80P-SV2(91) FX8C-80P-SV2(92) FX8C-80P-SV2(93) FX8C-100P-SV2(71) FX8C-100P-SV2(91) FX8C-100P-SV2(92) FX8C-100P-SV2(93) FX8C-120P-SV2(71) FX8C-120P-SV2(91) FX8C- 120P-SV2(92) FX8C-140P-SV2(71) FX8C-140P-SV2(91) FX8C-140P-SV2(92) FX8C-140P-SV2(93) FX8C-60P- SV4(35) FX8C-60P-SV4(71) FX8C-60P-SV4(91) FX8C-60P-SV4(92) FX8C-60P-SV4(93) FX8C-80P-SV4(71) FX8C- 80P-SV4(91) FX8C-80P-SV4(92) FX8C-80P-SV4(93) FX8C-100P-SV4(71) FX8C-100P-SV4(91) FX8C-100P- SV4(92) FX8C-100P-SV4(93) FX8C-120P-SV4(35) FX8C-120P-SV4(71) FX8C-120P-SV4(92) FX8C-120P-SV4(95) FX8C-140P-SV4(71) FX8C-140P-SV4(91) FX8C-140P-SV4(92) FX8C-140P-SV4(93) FX8C-60P-SV6(71) FX8C-60P- SV6(91) FX8C-60P-SV6(92) FX8C-60P-SV6(93) FX8C-60P-SV6(96) FX8C-80P-SV6(71) FX8C-80P-SV6(91) FX8C- 80P-SV6(92) FX8C-80P-SV6(93) FX8C-100P-SV6(71) FX8C-100P-SV6(91) FX8C-100P-SV6(92) FX8C-100P- SV6(93) FX8C-120P-SV6(71) FX8C-120P-SV6(91) FX8C-120P-SV6(92) FX8C-140P-SV6(71) FX8C-140P-SV6(83) FX8C-140P-SV6(91) FX8C-140P-SV6(93) FX8C-40P-SV6(71) FX8C-40P-SV7.5(92) FX8C-60/60P11-SVJ(71) FX8C- 80/80P11-SVJ(71)