REVISION BI FTMH-1XX-XX-XX-DV-XX No OF POS PER ROW OPTIONS -02 THRU -50 -P: PICK & PLACE PAD (USE PPP-30) DO NOT (SEE NOTE 10) (USE PPP-30-NT FOR TAPE & REEL) TABLE 1 SCALE FROM (SEE FIG 3, SHT 4; 6 POS MIN) LEAD STYLE THIS PRINT -TR: TAPE & REEL PACKAGING LEAD STYLE "A" "B" -02: .075 [1.91] -ES: SNAP ON END SHROUDS (USE T-1S16-03-XX-2) (SEE FIG 2, SHT 2; 9 POS MIN) -02 .075 [1.91] C 0.075 -03: .065 [1.65] MOLD TO POSITION END SHROUDS (USE T-1S16-04-XX-2) (5 POS MIN; SEE FIG 2, SHT 2) -03 .065 [1.65] C 0.055 (SAMTEC DISCRETION ON WHICH END SHROUDS PLATING SPECIFICATION ARE USED FOR POSITIONS -09 AND GREATER) -L: 10µ" LIGHT SELECTIVE GOLD IN -EP: GUIDE POST (SEE FIG 4, SHT 4; 9 POS MIN) CONTACT AREA, MATTE TIN ON TAIL (USE ONLY WHEN MATING WITH A CLM) -F: 3µ" FLASH SELECTIVE GOLD IN -EC: LOCKING CLIP (SEE FIG 5, SHT 4) CONTACT AREA, MATTE TIN ON TAIL (SEE NOTE 9; 9 POS MIN) -H: 30µ" HEAVY GOLD IN CONTACT -A: ALIGNMENT PIN (SEE FIG 6 & 7, SHT 5) AREA, 3µ" FLASH GOLD ON TAIL (SAMTEC DISCRETION ON WHICH -A PIN IS USED) -G: 10µ" GOLD IN CONTACT AREA, (MOLDED: 3 POS MIN, USE FTMH-75-D-XX) 3µ" FLASH GOLD ON TAIL (STAKED: 7 POS MIN, USE FTMH-60-D) -LM: 10µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL ROW SPECIFICATION -DV: DOUBLE ROW VERTICAL C (USE FTMH-75-D) No OF POS x .03937[1.0000]±.010[0.25] No OF POS X .03937[1.0000]-.03937[1.0000] 02 50 .125 3.18 REF FTMH-75-D 49 01 2 MAX SWAY (EITHER DIRECTION) "B" .012 0.30 SQ CONTACT AREA REF 2 MAX SWAY 2 MAX SWAY C (SEE NOTE 8) T-1S16-03-XX-2 (EITHER DIRECTION) (EITHER DIRECTION) (SEE TABLE 1) "A" C 90°±3° (SEE TABLE 1) .0705+.005 1.791+0.13 (SEE NOTE 6) .004[0.10] -.000 0.00 C .0585 1.486 REF FIG 1 SEE( 2N POLTCES 4) SEE NOTE 3 FTMH-125-03-X-DV SHOWN .040 1.02 REF .205±.008 5.21±0.20 (SEE NOTE 7) NOTES: C .03937±.004 1.0000±0.10 1. C REPRESENTS CRITICAL DIMENSION. 2. MINIMUM PUSHOUT FORCE: 1.0 LB = 16 OZ. UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * C 3. MAXIMUM BURR: .003 [0.08] DIMENSIONS ARE IN INCHES. TPHROISP DROIECTUAMRYE INNTF OCORNMTAATIINOSN C AONNDF IADLELN DTEIASLIG ANN, D C 4. MAXIMUM CUT FLASH: .010 [0.25] TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS 5. POSITIONS -02 THRU -04 TO BE LAYER PACKAGED. DECIMALS ANGLES AINNCD. TSHAILSE DS ORCIGUHMTSE NATR ES HEAXLPLR NESOSTL YB ER EDSIESRCVLOEDSE BDY, ISNA MWTHEOCL, E 6. MEASURED AT BEND RADIUS. .XX: .01[0.3] 2 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 78.. SFOHERA SRE LTEACILTSI VTOE P DLIAMTEINNGSI OONP TSIOHONSW, NG.OLD PLATING TO ..XXXXXX:X : .0.0050[200.1[03.]051] ROWETRPHIRTEOTRED PNUR CCOEOJDENC,S TTE RINNAT NA OSNFFYE S RMARMAENDTEN OCER,R II NWNCCI.TOHROPOUTR ATTHEED E IXNP ARENSYS PeH-MOaNilE: :i n8f1o2@-9S4A4M-6T7E3C3. c o m FA X : 8 1 c2o-9d4e8:- 550543722 BE ON POST, TIN PLATING TO BE ON TAIL. MATERIAL DO NOT SCALE DRAWING SHEET SCALE: 5:1 DESCRIPTION: 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -EC OPTION 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS INSULATOR: MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -EC OPTION. BTELRAMCIKN,A LLC:P, UL-94-V-0 DWG. FNOT.MH-1XX-XX-XX-DV-XX 10. NUMBER OF POSITIONS MAY BE AS HIGH AS -75 FOR SAMTEC PHOSPHOR BRONZE MANUFACTURING ONLY. BY: PURVIS 04/22/96 SHEET 1 OF 6 F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW

REVISION BI (NO OF POSITIONS + 2) x .03937[1.0000]±.008[0.20] C .170 4.32 .206 5.24 REF REF ES-FTMH .128 3.25 REF .151 3.84 C SNAP ON END .205 5.21 SHROUDS (No OF POS + 2) x .03937[1.0000] ±.0100[0.25] C (No OF POS x .03937[1.0000] + .021[0.52] REF (No OF POS - 1) x .03937[1.0000] + . 0 0 3 [ 0 . 0 8 ] - .001 [0.03] .173 4.39 REF FTMH-75-ES-XX .0820 2.083 .1525 3.874 REF REF MOLDED TO POSITION END * PROPRIETARY NOTE * SHROUDS THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 FIG 2 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 -ES: END SHROUDS DESCRIPTION: FTMH-112-02-X-DV-ES SHOWN DO NOT SCALE DRAWING 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) DWG. NO. SHEET SCALE: 5:1 FTMH-1XX-XX-XX-DV-XX F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW BY: PURVIS 04/22/96 SHEET 2 OF 6

REVISION BI THEORETICAL CUT LINES FTMH-105-XX-XX-DV-ES SHOWN (BEFORE CUT) THEORETICAL CUT LINES FTMH-110-XX-XX-DV-ES SHOWN (BEFORE CUT) THEORETICAL CUT LINES FTMH-113-XX-XX-DV-ES SHOWN (BEFORE CUT) * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DO NOT SCALE DRAWING 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP DWG. NO. SHEET SCALE: 5:1 FTMH-1XX-XX-XX-DV-XX F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW BY: PURVIS 04/22/96 SHEET 3 OF 6

REVISION BI NOTE "M" = USED MEASURED DIMENSION (REF) "P" = (("M" - .200[5.08]) / 2) ±.020[.51] "B" REF "M" (SEE TABLE 3) (SEE NOTE) CL .200 5.08 "P" C REF (SEE NOTE) .125 3.18 FIG 3 TABLE 3 -P: PICK & PLACE PAD PAD "B" FTMH-125-03-X-DV-P SHOWN PPP-30 .125[3.18] (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) PPP-30-NT .190[4.83] C NO OF POS x .03937[1.0000] + .216[5.48]±.008[0.20] .075 1.91 REF CL NO OF POS x .03937[1.0000] + .137[3.47] REF FTMH-EP .122 3.10 REF .250 6.35 REF C .273 6.94 FIG 4 .275 6.99 REF -EP: GUIDE POST .170 4.32 REF FTMH-125-03-X-DV-EP SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) C NO OF POS x .03937[1.0000] + .160[4.07]±.008[0.20] .170 4.32 REF FTMH-EC .128 3.25 REF C .151 3.84 * PROPRIETARY NOTE * .070 1.78 C THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, LC-05-TM MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, NO OF POS x .03937[1.0000] + .110[2.84]±.008[0.20] IONRC .P TAHRITS, DTOO CAUNMY EUNNTA SUHTAHLOL RNIZOETD B PEE DRISSOCNLO OSRED E,N INTI TWY HNOOLRE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .056 1.42 REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 FIG 5 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 -EC: LOCKING CLIP DESCRIPTION: FTMH-125-03-X-DV-EC SHOWN DO NOT SCALE DRAWING 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) DWG. NO. SHEET SCALE: 5:1 FTMH-1XX-XX-XX-DV-XX F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW BY: PURVIS 04/22/96 SHEET 4 OF 6

REVISION BI (No OF POS -2) x .03937[1.0000]±.005[0.13] SM-A7H FTMH-60-D FIG 6 C .028 0.71 -A: ALIGNMENT PIN (STAKED) (MIN 7 POSITIONS) .025 0.64 FTMH-125-03-X-DV-A SHOWN REF (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) .025 0.64 .037 0.94 REF FTMH-75-D-XX (No OF POS -2) x .03937[1.0000] REF FIG 7 FULL RADIUS .025 0.64 -A: ALIGNMENT PIN (MOLDED) REF (MIN 3 POSITIONS) FTMH-125-03-X-DV-A SHOWN (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) TABLE 2 (SEE NOTE 5 FOR PACKAGING NOTES) LEAD STYLE OPTION (S) PACKAGING TUBE TUBE PLUG -02, -03 -NONE PT-1-24-01-60 TP-03 (x 2) -02, -03 -A PT-1-24-01-60 TP-03 (x 2) -02, -03 -P, -A-P PT-1-24-01-60 TP-03 (x 2) -02, -03 -ES, -ES-P, -ES-A PT-1-24-01-63 TP-24 (x 2) -ES-P OPTION PT-1-24-01-63 -02, -03 -EC, -EC-P, -EC-A PT-1-24-01-60 TP-03 (x 2) -02, -03 EP, -EP-A, -EP-A-P PT-1-24-02-15 TP-03 (x 2) -A OPTION -EC OPTION PT-1-24-01-60 PT-1-24-01-60 * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND -EP, -EP-A & -EP-A-P OPTION PMRAONPURFIEATCATRUYR IINNFGO, RRMEPARTOIODNU CATNIODN A,L UL SDEE, SPIAGTNE, NT RIGHTS PT-1-24-02-15 AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, IONRC .P TAHRITS, DTOO CAUNMY EUNNTA SUHTAHLOL RNIZOETD B PEE DRISSOCNLO OSRED E,N INTI TWY HNOOLRE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail: info@SAMTEC.com code: 55322 WRITTEN CONSENT OF SAMTEC, INC. PACKAGING VIEWS DESCRIPTION: DO NOT SCALE DRAWING 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP DWG. NO. SHEET SCALE: 5:1 FTMH-1XX-XX-XX-DV-XX F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW BY: PURVIS 04/22/96 SHEET 5 OF 6

REVISION BI "A"- .038 0.97 FTMH-75-D "A" - .038 0.97 "A" - .038 0.97 .800 20.32 .125±.010 3.18±0.25 .050±.005 1.270±0.127 IN PROCESS 3 IN PROCESS 2 W/O -A PINS IN PROCESS 1 W/O -A PINS W/O -A PINS FTMH-75-D-XX "A"-.053 1.35 "A"-.053 1.35 "A"-.053 1.35 .800 20.32 .140±.010 3.56±0.25 .065±.005 1.651±0.127 IN PROCESS 2 IN PROCESS 3 WITH -A PINS WITH -A PINS IN PROCESS 1 WITH -A PINS * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: DO NOT SCALE DRAWING 1mm x 1mm DOUBLE VERTICAL SMT TERMINAL STRIP DWG. NO. SHEET SCALE: 5:1 FTMH-1XX-XX-XX-DV-XX F:\DWG\MISC\MKTG\FTMH-1XX-XX-XX-DV-XX-MKT.SLDDRW BY: PURVIS 04/22/96 SHEET 6 OF 6