REVISION BH NOTES: FTE-1XX-XX-X-DV-XX-XX 1. C REPRESENTS A CRITICAL DIMENSION. OPTIONS 2. MAXIMUM CUT FLASH: .010 [0.25] No OF POSITIONS -P: PICK AND PLACE PAD (SEE FIG 2, SHT 2) 3. MINIMUM PUSHOUT FORCE: 1 LB -05 THRU -90 (ONLY AVAILABLE FOR 08-90 POSITIONS) 4. SHEAR TAILS TO DIMENSION SHOWN. (PER ROW) (USE PPP-37) DO NOT 5. MAXIMUM BURR: .003 [0.08] SCALE FROM 6. MAXIMUM COPLANARITY: LEAD STYLE ( USE PPP-37-NT FOR TAPE & REEL) -TR: TAPE & REEL PACKAGING THIS PRINT -05 THRU -49 = .004 [0.10] -01: .075 POST (USE PPP-37-NT ONLY) -50 THRU -64 = .006 [0.15] (USE T-1S29-04-X-2 FOR HAND FILL, -A: ALIGNMENT PIN (MOLDED OR STAKED) -65 THRU -90 = .009 [0.22] T-1S29-02-X-2 FOR MACHINE FILL). [ SAMTEC DISCRETION ON WHICH 7. FOR -XX POSITION ASSEMBLY USE -XX POSITION -02: .175 POST -A PIN USED] BODY EXCEPT AS LISTED IN TABLE 2. (USE T-1S29-04-X-2 FOR HAND FILL, (MOLDED 4 POS MIN, SEE FIG 6, SHT 2) 8. IF -A CALLED OUT ON ASSEMBLY, USE -A ON END OF BODY CALLOUT. T-1S29-02-X-2 FOR MACHINE FILL). (USE FTE-90-D-XX) USE FTE-190-0X-G-DV-SA FOR STOCK THAT WILL BE CUT FOR STAKED -A ORDERS. -03: .120 POST (STAKED 7 POS MIN, SEE FIG 5, SHT 2) USE FTE-190-0X-G-DV FOR ORDERS NOT REQUIRING STAKED -A OPTION. (USE T-1S29-04-X-2 FOR HAND FILL, (USE FTE-90-D-A) 9. MAXIMUM ATTACHED FLASH ALLOWED ON POST SIDE ONLY: .02 [0.5] T-1S29-02-X-2 FOR MACHINE FILL). -M: METAL PICK & PLACE PAD 10. -ES MOLDED OPTION ONLY, DURING CUT PROCESS, WALL MUST BE A MINIMUM USE MPP-17-5 (SEE FIG 9 - SHT 3) OF .004" OR COMPLETELY REMOVED. (10 POS MIN, AVAILABLE IN -01 STYLE ONLY) 11. IF RETENTION IS BELOW SPECIFICATION, A SUBSTITUTION OF FTE-90-D FOR FTE-90-D-A PLATING SPEC IS ACCEPTABLE. C -G: 10µ" GOLD IN CONTACT AREA, FLEX SHROUD OPTIONS (No OF POS x .0315) + . 004[+0.10] 3µ" GOLD ON TAIL (STYLE -01 ONLY) -.010[-0.25] -ES: END SHROUD .0157 0.399 "A" [SAMTEC DISCRETION ON WHICH -ES USED] .0315 0.800 ROW SPECIFICATION (SEE FIG 3, SHT 2 FOR SNAPPED-ON, 11 POSITIONS MIN) 02 180 -DV: DOUBLE ROW VERTICAL (SEE FIG 8, SHT 2 FOR MOLDED, (USE FTE-90-D-A) 5 POSITIONS PER ROW MIN, SEE TABLE 2) -EC: END SHROUD WITH LOCKING CLIPS CL .1200 3.048 (SEE FIG 7, SHT 2) REF (11 POSITIONS MIN) -EP: END SHROUD WITH GUIDE POSTS SEE NOTE 11 (SEE FIG 4, SHT 2) (11 POSITIONS MIN) 01 179 "A" 2.5 MAX SWAY (EITHER DIRECTION) 2 MAX SWAY 2 MAX SWAY (EITHER DIRECTION) (EITHER DIRECTION) T-1S29-XX-X-2 .0472+-..001066 1.200+-00..4115 C .0120 0.305 SQ REF SEE NOTE 9 .075 1.91 C (CONTACT AREA) "A" 90°±3° (SEE TABLE 1) C .055 1.40 REF .070 1.78 SEE NOTE 6 FTE-90-D BURR SIDE SEE NOTE 2 SEE NOTE 2 .18 4.6 (SEE NOTE 4 & 5) SECTION "A"-"A" FIG 1 FTE-1XX-03-X-DV SHOWN UNLESS OTHERWISE SPECIFIED, * PROPRIETARY NOTE * DIMENSIONS ARE IN INCHES. THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, TOLERANCES ARE: MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS DECIMALS ANGLES AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, .X: .1 [2.5] INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE .XX: .01 [0.3] 2 ORERP PRAORDTU, CTOED A, NTRY AUNNSAFUERTRHEODR OIZRE DIN PCEORRSPOONR OART EEDN ITNIT AYN NYO R 520 PARK EAST BLVD, NEW ALBANY, IN 47150 .XXX: .005 [0.13] OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 [0.051] WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 4:1 DESCRIPTION: INSULATOR: BLACK, LCP, UL 94 VO .8MM x 1.2MM C.L. TERMINAL STRIP ASSM. TERMINAL: PHOS BRONZE DWG. NO. FTE-1XX-XX-X-DV-XX-XX BY: DEAN P 9/01/2009 SHEET 1 OF 3 F:\DWG\MISC\MKTG\FTE-1XX-XX-X-DV-XX-XX-MKT.SLDDRW

REVISION BH .200 5.08 (NO OF POS x .0315 [.800] + .217 [5.53]) .0080 [0.203] .075 1.91 REF REF "R" REF CL "P" .275 6.99 REF FTE-EP .125 3.18 .150 3.81 REF REF .290 7.37 REF .314 7.98 "M" "M"= No OF POS X .0315 [0.800] FIG 2 "P"= ("M" - .200 [5.08]) / 2 .020 [0.51] -P OPTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) FIG 4 -EP OPTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) (NO OF POS x .0315 [0.800]) .120 3.05 REF + .025 [0.64] REF ((NO OF POS + 2) x .0315)+.004[+0.10] -.010[-0.25] .0057 0.145 REF (NO OF POS X .0315) +- . .00 1 0 04 [ [- +0 0. 2. 15 0] ] .130 3.30 REF (SEE NOTE 10) DETAIL 'B' NO OF POS X .0315 [0.800] + .062 [1.57] .008 [0.20] 'B' SCALE 6 : 1 .164 4.17 (4 PLCS) .197 5.00 REF FTE-ES REF FTE-XX-D-ES-XX-X .165 4.19 REF .135 3.43 .150 3.81 .140 3.56 REF REF .164 4.17 FIG 8 -ES OPTION (MOLDED) (5 POS MIN) FIG 3 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) -ES OPTION (SNAPPED ON) (11 POS MIN) (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) {(NO OF POS x .0315 [0.800]) + .160 [4.06]} .008 [0.20] C FTE-EC C .025 0.64 (NO OF POS - 2) x .0315 [0.800] .003 [0.08] SM-A11H .013 0.32 REF .164 4.17 CL .024 0.61 REF FIG 5 .037 0.94 REF LC-05-TM {(NO OF POS x .0315 [0.800]) + .111 [2.82]} .008 [0.20] .070 1.78 -A OPTION (STAKED) (7 POS MIN) (DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1) FIG 7 -EC OPTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) FTE-90-D-XX TH*IS DOCUMENTP CROONTPARINIES TCAONRFYID ENNOTIATLE AND * .037 0.94 PMRAONPURFIEATCATRUYR IINNFGO, RRMEPARTOIODNU CATNIODN A,L UL SDEE, SPIAGTNE, NT RIGHTS REF AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, CL .025 0.64 IONRC .P TAHRITS, DTOO CAUNMY EUNNTA SUHTAHLOL RNIZOETD B PEE DRISSOCNLO OSRED E,N INTI TWY HNOOLRE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REF REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 OWTRHITETRE PNR COOJENCSTE INNT A ONFY S MAMANTENCE,R I NWCI.THOUT THE EXPRESS e-Mail info@SAMTEC.com code 55322 DESCRIPTION: (NO OF POS - 2) x .0315 [0.800] .003 [0.08] DO NOT SCALE DRAWING .8MM x 1.2MM C.L. TERMINAL STRIP ASSM. FIG 6 .025 0.64 REF DWG. NO. SHEET SCALE: 4:1 FTE-1XX-XX-X-DV-XX-XX -A OPTION (MOLDED) (4 POS MIN) (DIFFERENT AS SHOWN OTHERWISE SAME AS FIG 1) F:\DWG\MISC\MKTG\FTE-1XX-XX-X-DV-XX-XX-MKT.SLDDRW BY: DEAN P 9/01/2009 SHEET 2 OF 3

REVISION BH "M" MPP-17-5 .250 6.35 .100 2.54 REF "P" .065 1.65 REF .080 2.03 "M" = No OF POSITIONS x .0315 [0.800] "P" = {( "M" - .250 [6.35]) / 2 } .020 [0.51] FIG 9 -M OPTION (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1) PT-1-24-01-37 PT-1-24-01-37 PT-FTE001-DV-P PT-FTE001-DV-P -01-EC & -EC-M OPTIONS -01-EC-P OPTION -01-ES-P OPTION -01-ES-A-P OPTION PT-1-24-13-09 PT-1-24-01-37 -01 & -03 OPTION -01-A & -03-A OPTION -02 OPTION -02-A OPTION PT-1-24-01-09 PT-FTE001-DV-P PT-FTE001-DV-P -01-ES & -01-ES-A OPTIONS -01-ES-M OPTION * PROPRIETARY NOTE * THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info@SAMTEC.com code 55322 010-1E-PE-PM --0031--PP ,O -0P2T-IPO &N --0031--AA--PP ,O -0P2T-IAO-NP & & --0011--AM- M DO NOT SCALE DRAWING DE.S8CMRIPTMION x: 1.2MM C.L. TERMINAL STRIP ASSM. OPTION DWG. NO. -01-EP-P OPTION SHEET SCALE: 4:1 FTE-1XX-XX-X-DV-XX-XX F:\DWG\MISC\MKTG\FTE-1XX-XX-X-DV-XX-XX-MKT.SLDDRW BY:DEAN P 9/01/2009 SHEET 3 OF 3