Series FT 4-Wire Touch Screens with Printed Tails s e gl g General Specifications o T s er ck Electrical Capacity (Resistive Load) o R Power Level: 1mA @ 5V DC (resistive load) s Other Ratings n o utt XY Resistive Value: 250 ~ 850Ω; Wide: 120 ~ 1,500Ω b sh Linearity: ±1.5% maximum u P Insulation Impedance: 10MΩ minimum @ 25V DC B d P Expected Operational Life: Writing: 50,000 operations minimum (approximately 30mm movement with stylus) e at Tapping: 1,000,000 operations minimum (pressing force 4.9N using silicone rubber, hardness 60°) n mi Touch Activation Force: 1.47N maximum u Ill Chattering Time: 10 milliseconds maximum e bl Light Transmission: 80% typical (Touch Panel portion) a m m Surface Hardness: 2H minimum (JIS K5600) a gr o Environmental Data Pr Operating Temperature Range: –20°C ~ +70°C (–4°F ~ +158°F) s ck Storage Temperature Range: –40°C ~ +80°C (–40°F ~ +176°F) o yl Relative Humidity: +60°C (+140°F), humidity 90%, 240 hours e K s e TYPICAL ORDERING EXAMPLE ari ot R FT AS 00 12.1 A N 4 s e d Sli Number of Keys Type ctiles 00 Analog Input Method 4 4-Wire a T A Finger or Stylus Screen Size DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Tilt 5.7 5.7” *Position of Tail (Analog) FTAS00–12.1AN–4 6.5 6.5” No Left or Right (Horizontal) 8.4 8.4” Code 10.4 10.4” V Top or Bottom (Vertical) h c L u o 10.6 10.6” Narrow Frame Type 1 T S 12.1 12.1” (Horizontal) Narrow Frame Type 2 Narrow Frame Type 2 Horizontal Tail Position s 15 15.0” N or (Horizontal) at 15.6 15.6” c di W Wide Type (Horizontal) In 19 19.0” *Aspect Ratio: Touch Screen s Narrow Frame: 4:3 e ori Wide Frame: 16:9 with 12.1" Screen s s e c c A nt me Finger or Stylus Input 4-Wire Analog e pl p u S L10 www.nkkswitches.com 6/15/18

Series FT 4-Wire Touch Screens with Printed Tails s PART NUMBERS & DESCRIPTIONS gle g o T s er k c o R FTAS00-5.7AS-4 FTAS00-6.5AS-4 FTAS00-8.4AS-4 FTAS00-10.4AS-4 s n o utt b h s u P B P d e at n mi FTAS00-10.4AV-4 FTAS00-10.6AW-4 FTAS00-12.1AN-4 FTAS00-12.1AW-4 Illu e bl a m m a gr o Pr s k c o yl e K FTAS00-15AN-4 FTAS00-15.6AW-4 FTAS00-19AN-4 s e ari 4-Wire Analog Touch Screens ot R *Terminal Detail Screen Key Area Viewing Area External Panel 8 Pin Tail Part Number Size in Dimensions Dimensions Dimensions Thickness .049” (1.25mm) es Inches d Pitch Sli 4.54” x 3.40” 4.76” x 3.61” 5.16” x 3.98” Length FTAS00-5.7AS-4 5.7 1 (115.2mm x 86.4mm) (121.0mm x 91.6mm) (131.0mm x 101.0mm) 2.559” (65.0mm) e .055” me Typal Tail FTAS00-6.5AS-4 6.5 (13 2 5.0.2m0m” xx 39.99.00”m m) (1385.0.4m3m” xx 41.0153.”0 mm) (1505.0.9m1m” xx 41.1567.”0 mm) (1.4mm) 2.559L”e n(6g5th.0 mm) actiles ant T ro row FHoriz FTAS00-8.4AS-4 8.4 (1706.9.7m3m” xx 51.2190.”6 m m) (1766.5.9m5m” xx 51.3353.”4 mm) (1867.5.3m4m” xx 51.4649.”4 mm) 3.150L”e n(8g0th.0 mm) r a N FTAS00-10.4AS-4 10.4 (2118.2.3m2m” xx 61.5284.”4 m m) (2158.0.4m7m” xx 61.6329.”4 mm) (2258.6.8m8m” xx 61.7715.”4 mm) 3.150L”e n(8g0th.0 mm) Tilt ertical Tail FTAS00-10.4AV-4 10.4 (2128.2.3m5m” xx 61.5298.”4 m m) (2168.4.5m2m” xx 61.6433.”4 mm) (2268.5.9m2m” xx 71.8230.”0 mm) 3.150L”e n(8g0th.0 mm) V ame Type 2ntal Tail FFTATASS0000-1-125.1AANN-4-4 1125..10 (241951..6.897m77m2”” xx x 71 8.82.495.8630”m”m) (241992..8.612m37m0”” xx x 71 9.84.810.3618”m”m) (2611002...026m36m69”” x xx 1 799..7869.6055m””m) .083” 3.150LL”ee nn(8gg0tthh.0mm) L Touch arrow FrHorizo FTAS00-19AN-4 19.0 ((33107446...8131mm5mm” xxx 2132108.18..150m0m”mm)) ((33180528...0013mm9mm” xxx 132203.721..0412mm”mm)) ((33192551...585mm71mm” xxx 32124215.6..053mm8”mm)) (2.1mm) 33..115500L””e n((88g00th..00mmmm)) ndicators N I 9.071” x 5.441” 9.189” x 5.563” 9.756” x 6.094” Length FTAS00-10.6AW-4 10.6 s Wide Type rizontal Tail FTAS00-12.1AW-4 12.1 ((22631100.1..422m8mm0m” xxx 1613.64832..252m”mmm)) ((22631430.2..446m0mm4m” xxx 1614.65165..314m”mmm)) ((22741570...088mm27mm” xxx 11 675.649..2089mm”mm)) 33..115500L””e n((88g00th..00 mmmm)) Accessorie o H FTAS00-15.6AW-4 15.6 13.551” x 7.618” 13.681” x 7.748” 14.276” x 8.433” Length nt (344.2mm x 193.5mm) (347.5mm x 196.8mm) (362.6mm x 214.2mm) 3.150” (80.0mm) me e Note: For other sizes or frame types, contact the factory. *4 pin available with 1.0mm or 1.25mm pitch. Contact factory for details. pl p u S www.nkkswitches.com L11

Series FT 4-Wire Touch Screens with Printed Tails s gle TYPICAL DIMENSIONS A g To BViewable Area CActive Area .(01.559) Air Vent Horizontal Tail & ers Narrow Frame Type 2 ( 830.1.50)±1.0 ck (70.0) Ro 2.76 YUP (60.0) H 2.36 (10.0) ns (1.25)Typ (5.0) .394 Pin 1 D o .049 .197 shbutt XLE XRI E u P F B (.1414.235)±0.1 Pin 8 Center of Active Area ed P .(003.81)Typ .(002.50) (218.1.12) at Reinforcement Film min 16 x 24 YLO u Ill e bl a m GCenter of Active Area m a Progr (55.0)( 625.5.06)±1.0 2.17 s Tail Dimensions for (45.0) ock FTAS00-5.7AS-4 (10.0) 1.77 eyl FTAS00-6.5AS-4 .394 Pin 1 K s e ari Pin 8 ot R Contact Side Insulation Film Top Electrode s e Slid (.00.132)±0.05 Stiffener Tail Reinforcement Film Bottom Electrode J YUP s Pins Signal e Tactil 1 XLE XRI 1, 2 YUP 8 3, 4 Y LO YLO 5, 6 XLE Tilt XYULEP,, XYRLOI: :T oBpo tEtolemct rEoledcetr Toedrem Tineramlinal 7, 8 XRI 4-Wire Analog Touch Screen Dimensions uch L Screen Dim B Dim C Dim D Dim E Dim G Dim H o Center of Center of T Part Number Size in Dim A Viewable Active Active Viewable Dim F Dim J Active Area Active Area Inches Area Area Area Area (Horizontal) (Vertical) s or dicat FTAS00-5.7AS-4 5.7 (131.50.±106.”3mm) (1241.7.06m”m) (1145.5.24m”m) (836..440m”m) (931..661m”m) (101.30.±908.”3mm) (672..2655m”m) (510..959m”m) (1.0.45m5m”) n I 5.91” 5.43” 5.20” 3.90” 4.13” 4.57” 3.03” 2.28” .055” s FTAS00-6.5AS-4 6.5 e (150.0±0.3mm) (138.0mm) (132.0mm) (99.0mm) (105.0mm) (116.0±0.3mm) (77.0mm) (58.0mm) (1.4mm) ori s s cce FTAS00-8.4AS-4 8.4 7.34” 6.95” 6.73” 5.10” 5.33” 5.69” 3.73” 2.84” .083” A (186.5±0.3mm) (176.5mm) (170.9mm) (129.6mm) (135.4mm) (144.4±0.3mm) (94.85mm) (72.2mm) (2.1mm) ent 8.88” 8.46” 8.31” 6.24” 6.39” 6.75” 4.49” 3.37” .083” m FTAS00-10.4AS-4 10.4 e (225.6±0.3mm) (215.0mm) (211.2mm) (158.4mm) (162.4mm) (171.4±0.3mm) (114.1mm) (85.7mm) (2.1mm) pl p u S L12 www.nkkswitches.com

Series FT 4-Wire Touch Screens with Printed Tails s TYPICAL DIMENSIONS ( 1.41.4235)±0.1 (1.25)Typ ggle .049 o (0.8)Typ (5.0) (0.3)±0.05 T .031 .197 .012 Vertical Tail (0.5) (10.0) Contact .020 .394 Stiffener Side s er Pin 8 Pin 1 (60.0) ock 2.36 R (70.0) 2.76 (28.2) Tail 1.110 ( 830.1.50)±1.0 Insulation ns Film o utt b Reinforcement Film h 16 x 24 us P B P d e at n Reinforcement mi YUP Film Illu Top e H Electrode abl m m D a gr o E Pr F ks LE RI BEloetctotrmode yloc X X Ke Center of Active Area s e ari ot R YLO es d Sli (1.5) .059 s Air Vent GCenter of Active Area .(028.13)±0.2 ctile C Ta B A 8 1 Tilt Pins Signal YUP 1, 2 YUP L uch o 3, 4 Y T XLE, XRI: Top Electrode Terminal XLE XRI LO YUP, YLO: Bottom Electrode Terminal 5, 6 X RI s 7, 8 X or YLO LE at c di n 4-Wire Analog Touch Screen Dimensions I Dim G Dim H es Screen Dim B Dim C Dim D Dim E Center of Center of ori Part Number Size in Dim A Viewable Active Active Viewable Dim F ss Active Area Active Area e Inches Area Area Area Area cc (Horizontal) (Vertical) A FTAS00-10.4AV-4 10.4 (226.85.±902.”3mm) (2186.5.42m”m) (2182.3.25m”m) (1569.2.48m”m) (1663.4.43m”m) (183.70.±200.”3mm) (1144.5.51m”m) (934..752m”m) ment e pl p u S www.nkkswitches.com L13

Series FT 4-Wire Touch Screens with Printed Tails s gle TYPICAL DIMENSIONS g o T Horizontal Tail & ers Narrow Frame Type 2 A k c Ro BViewable Area C Active Area (1.5) Air Vent .059 s n o utt (80.0) ±0.1 b 3.150 h Pus 2(7.075.06) YUP (60.0) PB 2.362 d nate (.519.07)±1.0 mi H u (1.25) Typ (10.0)±1.0 Ill .049 .394 D ble Pin 1 E a 1 amm XLE XRI F gr 8 o Pr ( 1.41.4235) ±0.1 Pin 8 (21.811.02) Center of Active Area s (0.8) Typ ck .031 Reinforcement Film o yl e K s YLO e ari ot R GCenter of Active Area s e d Sli Contact Side Reinforcement Film Top Electrode ctiles (.00.132) ±0.05 Reinforcement Tail Bottom Electrode . 0(28.13) ±0.2 a T YUP Pins Signal Tilt 1 XLE XRI 1, 2 YUP 3, 4 Y 8 LO 5, 6 X YLO LE 7, 8 X ch L YUP, YLO: Top Electrode Terminal RI ou XLE, XRI: Bottom Electrode Terminal T Typical Dimensions ors Screen Dim B Dim C Dim D Dim E Dim G Dim H at Center of Center of c Part Number Size in Dim A Viewable Active Active Viewable Dim F ndi Inches Area Area Area Area Active Area Active Area I (Horizontal) (Vertical) s 10.236” 9.827” 9.677” 7.256” 7.406” 7.795” 5.177” 3.850” e FTAS00-12.1AN-4 12.1 ori (260.0±0.3mm) (249.6mm) (245.8mm) (184.3mm) (188.1mm) (198.0±0.3mm) (131.5mm) (97.8mm) s s cce FTAS00-15AN-4 15.0 12.669” 12.130” 11.972” 8.980” 9.138” 9.665” 6.398” 4.833” A (321.8.±0.3mm) (308.1mm) (304.1mm) (228.1mm) (232.1mm) (245.5±0.3mm) (162.5mm) (122.75mm) ent FTAS00-19AN-4 19.0 15.571” 15.039” 14.815” 11.850” 12.102” 12.638” 7.799” 6.319” m (395.5.±0.3mm) (382.0mm) (376.3mm) (301.0mm) (307.4mm) (321.0±0.3mm) (198.1mm) (160.5mm) e pl p u S L14 www.nkkswitches.com

Series FT 4-Wire Touch Screens with Printed Tails s TYPICAL DIMENSIONS gle g o T Horizontal Tail & Wide Frame s A ker c o BViewable Area R C Active Area (1.5) Air Vent .059 s n o ( 830.1.50) ±0.1 butt 2(7.075.06) (60.0) YUP Push 2.362 (5.0)±1.0 B .197 H d P ( 1.0.2459) T yp (.1309.04)±1.0 D ate n Pin 1 E mi 1 XLE XRI F Illue 8 abl m ( 1.41.4235) ±0.1 Pin 8 (21.811.02) Center of Active Area am gr (0.8) Typ o .031 Reinforcement Film Pr YLO ks c o yl e K GCenter of Active Area s e ari ot R Contact Side Tail Top Electrode s e d (.00.132) ±0.05 Reinforcement Reinforcement Film Bottom Electrode .0(28.13) ±0.2 Sli s e YUP ctil Pins Signal Ta 1 XLE XRI 1, 2 YUP 8 3, 4 Y LO YLO 5, 6 XLE Tilt YUP, YLO: Top Electrode Terminal 7, 8 X XLE, XRI: Bottom Electrode Terminal RI h L c u o T Typical Dimensions Screen Dim B Dim D Dim E Dim G Dim H ors Dim C Center of Center of at Part Number Size in Dim A Viewable Active Viewable Dim F c Inches Area Active Area Area Area Active Area Active Area ndi (Horizontal) (Vertical) I FTAS00-10.6AW-4 10.6 9.756” 9.189” 9.071” 5.441” 5.563” 6.094” 4.933” 2.984” es (247.8±0.3mm) (233.4mm) (230.4mm) (138.2mm) (141.3mm) (154.8±0.3mm) (125.3mm) (75.8mm) ori s s FTAS00-12.1AW-4 12.1 10.827” 10.404” 10.280” 6.425” 6.551” 6.929” 5.468” 3.465” cce (275.0±0.3mm) (264.26mm) (261.12mm) (163.2mm) (166.4mm) (176.0±0.3mm) (138.89mm) (88.0mm) A FTAS00-15.6AW-4 15.6 (3621.46.±207.63”mm) (31437.6.58m1m”) (31434.5.25m1m”) (179.36.158m”m) (179.67.488m”m) (2148.2.4±303.3”mm) (178.11.338m”m) (140.72.117m”m) ment e pl p u S www.nkkswitches.com L15

Series FT 4-Wire Touch Screens with Printed Tails s e Controller Board for RS232C gl g To FTCS04B for RS232C CN1 4-Wire Analog Touch Screen Connector - 8 Pins (65.0) 2.559 (57.0) Pin No. Symbol Description ckers 2.244 (.1676.09) .(383.55) 1, 2 Y0 For YUP or YLO Ro 3, 4 Y1 (3.65) Typ (37.0) Lot No. 5, 6 X0 ons (1..21454) Typ 1.457 C8N1 Pin No.CN23 1 (.52.157) 7, 8 X1 For XRI or XLE butt .049 (1.56.2705) Pin No. .(002.50) sh (30.0) 3 Pu (0.5) Typ 1.181 1 Pin No. (.83.105) (.415.07) CN2 RS232C Header Connector - 3 Pins d PB .020 .(27.955) CN21 (.93.504) Typ* Controller Board Side e S at FTCS04B Pin Computer n Symbol Description umi .(002.50) Part No. (.313.30) Dia Typ No. Side Ill * Pattern on Both Sides is Prohibited Area 1 RD Receiving Data (IN) Sending Data ble 2 SD Sending Data (OUT) Receiving Data a m 3 GND GND GND m Direction of Tail Insertion a Slider gr Contact Surface Pro (.52.143) .(252.60) .(27.706) CN3 Header Connector for Power Supply - 2 Pins s (1.6) (0.35) Typ Pin No. Symbol Description ck .063 (3.5) .014 (0.5) (1.3) Keylo .138 (5.0) (0.0.6256) .020 .051 12 GVNCCD SuppGlyN VDoltage .197 s Controller Boards & Drivers e ari ot R DISTINCTIVE CHARACTERISTICS Controller Boards Communication Type Part No. • Compatible with Control Board USB/RS232C Protocol s e d • Equipped with EPROM for Saving Setting Data 4-Wire FTCS04B RS232C Sli • Device Drivers are Windows 7 and 8 Compatible 4-Wire FTCU04B USB System Configuration for USB System Configuration for RS232C s e ctil a T AT713 USB Receptacle RS232C Cable USB Controller Connector Connector Controller Connector Board Board Tilt TouAcnha Slcorgeen TouAcnha Slcorgeen RS232C IC Chip USB IC Chip Header FTCSU548 PC Header FTCSU548 PC Connector Connector AT714 Receptacle Touch L DevIincset aDllr iver Monitor DevIincset aDllr iver HCfooer na5ndVee cr tor 5V DC Ctoo Pnonwecetro Sr oCuorncneects Monitor Power Supply Available through NKK Switches s or cat General Specifications di In Items FTCS04B FTCU04B Touch panels can be operated the Interface RS232C USB 2.0 Full Speed same as PC mouse functions by s e combining a control board or device sori Clock 6MHz 6MHz driver and analog touch screen. es Supply Voltage 5.0V 5.0V c Ac Resolution 10bit 10bit For specifications or technical data for nt Current Consumption 40mA maximum 100mA maximum the controller boards and drivers, see me Communication Speed 9600 bps ______ NKK's web site or call our engineering e pl Communication Format Data Length: 8bit Parity: None Stop Bit: 1 ______ support personnel. p u S L16 www.nkkswitches.com

Series FT 4-Wire Touch Screens with Printed Tails Absolute Maximum Ratings Recommended Values es gl g Items Symbols Minimum Maximum Notes Items Symbols Minimum Typical Maximum Notes o T Supply ____ Voltage VCC –0.3V +5.5V SVuopltpalgye VCC +4.75V +5 +5.25V ____ ers k IVnopltuatge VTP ____ VCC PanToeul cInhp ut OTepmepraertiantgu re TOPR 0 ____ ++17508°°CF CondNenos ation Roc *V –15V +15V RS232C RS s n o Operating 0°C +70°C ____ utt Temperature TOPR +32°F +158°F shb u P STetomrpaegrea ture TSTG ––2153°°CF ++18855°°CF ____ ed PB at n *VRS: Applies Only to RS232C Controller Boards umi Available Ill e DISTINCTIVE CHARACTERISTICS for RS232C bl a m m a • High Quality and Reliability gr o • Easy Integration Replacing Mouse Functionality Pr • Compatible with Control Board USB/RS232C s • Device Driver Compatible with Vista and Windows XP Controller Boards ock Operating Systems yl Available e K for USB NKK offers controller boards compatible with USB or with RS232C. See web site or contact factory for specifications s and technical data for any of the controller boards and drivers. arie ot R IC Chip & Accessories DISTINCTIVE CHARACTERISTICS General Specifications for IC FTCSU548 s e d • Interface: USB and RS232C Package LFQFP 48 Pins Sli • High Speed and Accuracy Serial Interface (Asynchronous) or • Built-in Calibration Function Interface USB (Full Speed 2.0) s • Data Function Removal Built In to Eliminate Noise Supply Voltage 3.3/5.0V Typ; USB Available for 5V Only actile T IC FTCSU548 High Level: –170mA * Rated Output Current Low Level: +170mA Operation Frequency 16MHz Tilt A/D Converter Resolution 10bit The IC is for use with the 5- and 4-wire transparent touch screens, and is available for those who prefer to design their own control- Operating Temperature –20°C ~ +85°C (–4°F ~ +185°F) L ch u ler boards. When the screen is touched, it recognizes the position o T Storage Temperature –40°C ~ +125°C (–40°F ~ +257°F) of the touch by the level of analog voltage detected by the A/D. The A/D converter receives the value and sends a set of coordi- * Total Output Electric Current Amount of all the I/O Port nate values as serial data or USB. ors at c di OPTIONAL ACCESSORIES In s e AT713 Receptacle Connector AT714 Receptacle Connector ori s s e This Receptacle Connector with code AT714 is a Receptacle Connector with code to c c A connects to RS232C communication connect to power source of the control boards. of the controller boards. nt e m For more details and dimensioned drawings of the accessories, e pl go to NKK’s web site or call our engineering support personnel. p u S www.nkkswitches.com L17

Series FT Touch Screens s gle STORAGE, HANDLING & INSTALLATION g o T Handling of Controller Board s ker • Use arc prevention to protect device from static electricity. c o R • Power source should be activated after host and touch panel are connected. • When inserting connector CN1 and touch panel tail, be sure the slider of connector CN1 is pulled. Do not pull more than 10 times. s n o utt • Do not alter the product. b h s • Do not use any commands other than the ones outlined in the specifications. u P B • Place the product away from noise source (such as inverter from LCD operation) since tail can be affected by noise. P d e • If device driver (USB) does not work after installation, reboot the host computer while connected to the controller board. at n mi • This product does not support suspended mode (USB). u Ill • Protocol of USB transmission is one frame per one transaction. e bl a • Contact factory if not using the protocol above. m m gra • Warranty for one year after delivery. NKK warranties the 4-wire touch panel when it is used with the NKK control board and driver. Pro Do not use third party control boards. NKK is not responsible for results of using damaged equipment with the controller boards. • NKK Switches cannot assume responsibility for damages caused by software side during use of the touch screens. s k c o • The touch screen pressed position may shift depending on various factors such as age, improper tail insertion or extreme tempera- yl e tures. In such cases, recalibration is necessary. K s e Installation ari ot R • Products are ESD sensitive and ESD protection is required. • Do not pull on the tail. Do not apply stress to the tail area. es • Avoid vibration or shock. Avoid any force or stress that may cause deformation to the product. d Sli • The touch screen mounting should not be loose. This may cause an adverse effect on detecting performance during operation. • Ensure there are no burrs around the edges of the case or housing that can cause false actuation. The edges of the case or housing should not enter the keying area. s e ctil Case/Housing A Ta • The case or housing and upper Cushioning Material Top Electrode electrode should have a space of (Film) about 0.5mm to accommodate (0.5) Approx. .020 Tilt expansion or shrinkage due to ALadyheersive temperature variances. If a shock * Sealing Bottom Electrode Material LCD (Glass) barrier is used, do not press hard on the upper electrode area. Any shock uch L barrier should be installed more than (.00.260) Min. Visible AArectaive Area InteErxfearmesp lwe iothf BOuprer roanti oHno aust iPnogi n t A To 0.6mm away from A. * Example: Double-sided Tape • To secure the touch screen, secure the lower portion with a device such as the LCD display panel. Do not attach the upper electrode s or with double-sided tape or similar product to avoid stress that can damage the upper or lower electrode. at c di • In order to balance upper and lower pressure, an air vent may be installed. Ensure that no liquid or oil will enter into the device. n I • Avoid air pressure applied to the touch screen as it may cause the top electrode to force air through the air vent, effecting electric es endurance. If pressure inside of the touch panel is reduced through the air vent, it may cause interference fringes or may remain in ori ON status. s s e cc • Ensure that the glass is handled carefully to prevent breakage during installation. A • Moisture from condensation on tail connection or edges may result in migration, causing short circuit failure. nt e m • Remove protective film from the touch screen after installation is completed. e pl p u S L24 www.nkkswitches.com

Series FT Touch Screens s STORAGE, HANDLING & INSTALLATION gle g o T Handling Precautions s • When opening product, take precaution with up/down and front/back directions. Glass edges are not chamfered, and corners or ker c edges can be sharp. Wear gloves when handling the product. Ro • Do not pick up the product by the tail or pull the tail area. s n • Use gloves or finger cots to prevent fingerprints on surface. o utt b • When handling the product, hold it outside of the viewing area. h s u P • Avoid stacking multiple products or placing other items on the product. B P • When packing or storing, the glass should be positioned face up. d e at n mi u Ill e bl Operating Precautions a m m a • Operate with fingers or a touch screen stylus only. gr o Pr • Do not press hard with a pen or similar object between viewing area and key area. s k c o yl e K Design Precautions • With analog type, resistive value change (by aging or individual differences) can dislocate the input area. Input area can be es calibrated with software. ari ot R • When installing on top of an LCD, noise from the display device can create misoperation. To avoid noise, implement grounding the display device frame. • Do not create software for simultaneous touch points, as analog type will read the center point between two touch points. es d • When used to draw a line, analog type will have a break at dot spacer. Compensate for this with software. Sli • Contact resistance may cause chatter depending on pressing condition. Software should detect signal after it stabilizes. s e ctil a T Other Precautions • Clean with a soft cloth and ethanol. Do not use any cleaning agents other than ethanol. Tilt • Store product in original package and store at the temperature and humidity range specified. • Do not store in an environment with acids or other corrosive gases or where condensation may occur. • Products are guaranteed based on evaluation of standards within the moisture tolerance and usage temperature range, but not h L c guaranteed to operate perpetually at this temperature. u o T • Note that an incorrect type of connector may damage the print surface. • Calibration data from one touch panel should not be applied to another panel; each should be calibrated individually. s or • Recalibration is necessary if connector has been removed from the tail and reconnected. at c di • All specifications based on the tested touch screens only. Evaluate the products after installation with customer's equipment. In • NKK Switches reserves the right to make product improvement changes without notice. s e ori s s e c c A nt e m e pl p u S www.nkkswitches.com L25

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: N KK Switches: FTAS00-57AS4 FTAS00-65AS4 FTAS00-84AS4 FTAS00-104AS4 FTAS00-104AV4 FTAS00-121AS4 FTAS00- 121A4 FTAS00-150A4 FTCU04B FTCS04B