ADVANCED ENGINEERING ADVANCED ENGINEERING Technical Data Sheet Technical Data Sheet Put-Ups Nominal Part Expansion Range Bulk Shop Available Lbs/ Complies to HL2 According to Size # Min Max Spool Spool Colors 100’ the Railway Standard 1/8” FRN0.13 3/32” 1/4” 1,000’ 225’ 7 0.16 DIN EN 45545-2 1/4” FRN0.25 1/8” 7/16” 1,000’ 200’ 7 0.24 5/16” FRN0.31 5/32” 15/32” 500’ 150’ 7 0.50 3/8” FRN0.38 3/16” 1/2” 500’ 125’ 7 0.57 Economical And Easy 7/16” FRN0.44 7/32” 5/8” 500’ 125’ 7 0.68 To Install 1/2” FRN0.50 1/4” 3/4” 500’ 100’ 7 0.72 9/16” FRN0.56 5/16” 7/8” 500’ 100’ 7 0.81 Expands Up To 150% 3/4” FRN0.75 1/2” 1 1/4” 250’ 75’ 7 1.07 Resists Gasoline And 1” FRN1.00 5/8” 1 5/8” 250’ 65’ 7 1.34 1 1/4” FRN1.25 3/4” 1 3/4” 250’ 50’ 7 1.60 Engine Chemicals 1 1/2” FRN1.50 1” 2 1/2” 200’ 40’ 7 1.96 Cut And Abrasion 1 3/4” FRN1.75 1 1/4” 2 3/4” 200’ 30’ 7 2.70 Resistant 2” FRN2.00 1 1/2” 3 1/2” 200’ 50’ 7 3.30 2 1/2” FRN2.50 1 3/4” 4 1/2” 200’ 50’ 7 3.80 3” FRN3.00 2 1/2” 4 3/4” 100’ 50’ 7 4.00 Mil-202, FAR-25, FMVSS 302, 3 End Construction VW-1, FR-1 Approved 1/4” FR30.25TB 1/8” 3/8” 1,000’ 200’ TB, GW, TW 0.39 Colors Available: Flame Retardant, Economical BK,TW,GW,TB,YS,OS,SP Sleeving Solution Flexo PET Flame Retardant (FR) sleeving is the perfect choice for electronic and high tech applications where flame retardance and durability are primary concerns. Ease of installation makes FR an efficient choice for long runs of wire or cable. The addition of an organic combustion inhibitor Cut Cleanly to our standard polyethylene terephthalate gives FR an Underwriters Lab and CSA flame resistance rating Hot Knife of VW-1. Material FR meets or exceeds automotive and aircraft Polyethylene Terephthalate engineering standards for flammability and flame retardance. Grade FRN Colors Available: Monofilament Diameter .010” Drawing Number Black (BK), White with Black Tracer (TW), Gray with White Tracer(GW), Black with White Tracer (TB), Black with Yellow Tracer (YS), TF001FR-WD Black with Orange Tracer (OS), Black with Red Tracer (SP). www.techflex.com 800.323.5140 • 973.300.9242 • fax: 973.300.9409 DIN EN 104 Demarest Road • Sparta, NJ 07871 FAR-25 VW-1 45545-2

AADDVVAANNCCEDE DEN EGNINGEINEREIENRGING Technical Data Sheet Technical Data Sheet Melt Point ASTM D-2117 ABRASION FLAMMABILITY 482°F (250°C) Maximum Continuous Abrasion Resistance Rating _______________________VW-1 Mil-I-23053 w Medium 257°F (125°C) w w . t Abrasion Test Machine e c Taber 5150 Minimum Continuous h f l -94°F (-70°C) e x Abrasion Test Wheel CHEMICAL .c o Calibrase H-18 m RESISTANCE Abrasion Test Load 1=No Effect 4=More Affected 500g PHYSICAL 2=Little Effect 5=Severely Affected Room Temperature 3=Affected PROPERTIES 80°F Aromatic Solvents ________________ 2 Monofilament Diameter________ .010” Humidity ASTM D-204 70% Aliphatic Solvents _________________ 1 Chlorinated Solvents ______________ 3 Flammability Rating ___________VW-1 Minor Scuffing Is Visible FMVSS-302 Approved Weak Bases ______________________ 1 100 Test Cycles Recommended Cutting _____Hot Knife Salts ____________________________ 1 Colors _________________________ 7 Several Broken Strands Strong Bases _____________________ 2 Wall Thickness ________________ .025” And Small Hole Salt Water 0-S-1926 ________________ 1 Developing Tensile Strength (Yarn) ____________ 5 Hydraulic Fluid MIL-H-5606 _________ 1 500 Test Cycles ASTM D-2256 Lbs Lube Oil MIL-L-7808 _______________ 1 Specific Gravity ASTM D-792 _____1.38 Material Destroyed De-Icing Fluid MIL-A-8243 __________ 1 Moisture Absorption% __________.1-.2 700 Test Cycles Strong Acids _____________________ 3 ASTM D-570 Pre-Test Weight Strong Oxidants __________________ 2 Hard Vacuum Data ________________ ASTM E-595 at 10-5 torr 4124.0 mg Esters/Ketones ___________________ 2 UV Light ________________________ 1 TML __________________________.19 Post-Test Weight CVCM ________________________.04 Petroleum _______________________ 1 3884.7 mg WVR __________________________.06 Fungus ASTM G-21 ________________ 1 Test End Loss Of Mass Halogen Free ___________________Yes Smoke D-Max _________________ 275 Point Of Destruction ASTM E-662 RoHS __________________________Yes 239.3 mg Outgassing __________________ Med SVHC ________________________None Oxygen Index __________________ 31 ASTM D-2863 © 2020 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden. Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable. Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions. Users should make their own evaluation to determine the suitability of these products for their unique and specific applications. 01-07