DATASHEET IEC Inlet Filters FN 9260 General Purpose Power Entry Module with Fuses Rated currents up to 10 A Approvals For one or two fuses Optional safety version (A type) Complies with IEC/EN 60601-1 Snap-in versions (S type) The FN 9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and Performance indicators fuses in a small form factor. Choosing FN 9260 product line brings you rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and Benefits Exceptional conducted attenuation performance, Technical specifications based on chokes with high saturation resistance and excellent thermal behavior Maximum continuous operating voltage 250 VAC, 50/60 Hz B types comply with the requirements of IEC/EN 60601-1 for creepage and clearance, leakage current Operating frequency DC to 400 Hz and high potential testing Rated currents 1 to 10 A @ 40°C max. Versions up to 10 A are available with fuse holder for High potential test voltage P –> PE 2000 VAC for 2 sec (standard types) P –> PE 2500 VAC for 2 sec (B types) one or two fuses P –> N 760 VAC for 2 sec (standard types) Custom-specific versions are available on request P –> N 1700 VDC for 2 sec (B types) Protection category IP 40 according to IEC 60529 Typical applications Temperature range (operation and storage) -25°C to +85°C (25/85/21) Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Portable electrical and electronic equipment Flammability corresponding to Inlet plastic: UL 94 V-0 Medical equipment Fuseholder plastic: UL 94 V-0 Small to medium-sized machines and household MTBF @ 40°C/230 V (Mil-HB-217F) 2,200,000 hours equipment Fuse holder 1 or 2 fuses (Ø5 x 20 mm) (certified to IEC 60127-6) Single-phase power supplies, switch-mode power Operating voltage 250 VAC, 50/60 Hz supplies Test and measurement equipment Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 25 Mar 2019 Filter selection table Capacitance Filter Rated current Leakage current* Inductance Resistance Input/Output Fuses Weight @ 40°C (25°C) @ 250 VAC/50 Hz L Cx Cy R connections (@ 120 VAC/60 Hz) [A] [mA] [mH] [μF] [nF] [kΩ] [Qty] [g] FN 9260 x-1-06-y 1 (1.2) 0.31 (0.18) 5.3 0.1 2.2 1000 -06 2 55 FN 9260 x-2-06-y 2 (2.3) 0.31 (0.18) 2.7 0.1 2.2 1000 -06 2 55 FN 9260 x-4-06-y 4 (4.6) 0.31 (0.18) 1.0 0.1 2.2 1000 -06 2 55 FN 9260 x-6-06-y 6 (6.9) 0.31 (0.18) 0.3 0.1 2.2 1000 -06 2 55 FN 9260 x-10-06-y 10 (11.5) 0.31 (0.18) 0.2 0.1 2.2 1000 -06 2 55 FN 9260 xA1-1-06-y 1 (1.2) 0.03 (0.02) 5.3 0.1 0.22 1000 -06 2 55 FN 9260 xA-2-06-y 2 (2.3) 0.07 (0.04) 2.7 0.1 0.47 1000 -06 2 55 FN 9260 xA-4-06-y 4 (4.6) 0.07 (0.04) 1.0 0.1 0.47 1000 -06 2 55 FN 9260 xA-6-06-y 6 (6.9) 0.07 (0.04) 0.3 0.1 0.47 1000 -06 2 55 FN9260 xA-10-06-y 10 (11.5) 0.07 (0.04) 0.2 0.1 0.47 1000 -06 2 55 FN 9260 xB-1-06-y 1 (1.2) 0.00 5.3 0.1 1000 -06 2 55 FN 9260 xB-2-06-y 2 (2.3) 0.00 2.7 0.1 1000 -06 2 55 FN 9260 xB-4-06-y 4 (4.6) 0.00 1.0 0.1 1000 -06 2 55 FN 9260 xB-6-06-y 6 (6.9) 0.00 0.3 0.1 1000 -06 2 55 FN9260 xB-10-06-y 10 (11.5) 0.00 0.2 0.1 1000 -06 2 55 FN 261 x-1-06-y 1 (1.2) 5.3 0.1 2.2 1000 -06 1 55 0.31 (0.18) FN 261 x-2-06-y 2 (2.3) 0.31 (0.18) 2.7 0.1 2.2 1000 -06 1 55 FN 261 x-4-06-y 4 (4.6) 0.31 (0.18) 1.0 0.1 2.2 1000 -06 1 55 FN 261 x-6-06-y 6 (6.9) 0.31 (0.18) 0.3 0.1 2.2 1000 -06 1 55 FN 261 x-10-06-y 10 (11.5) 0.31 (0.18) 0.2 0.1 2.2 1000 -06 1 55 * Leakage currentunder normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Product selector For example: FN 9260-1-06-10, FN 9260 SB-10-06-20, FN 261 S-6-06-30

3 EMC/EMI Products Schaffner Group Datasheets 25 Mar 2019 Typical filter attenuation Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym FN 9260: 1 to 4 A types FN 9260: 6 and 10 A types FN 261: 1 to 4 A types FN 261: 6 and 10 A types Mechanical data FN 9260/FN 261 FN 9260 S/FN 261 S Panel cut out Installation

4 EMC/EMI Products Schaffner Group Datasheets 25 Mar 2019 Dimensions FN 261 FN 261 S FN 9260 FN 9260 S Tolerances A 46 34 ±0.3 B 35 35 ±0.3 C 36 ±0.3 D 41 41 ±0.3 E 27.8 27.8 +0.3/-0 F 5.5 5.5 ±0.3 G 32 32 +0.3/-0 H Ø3.2 ±0.1 I 14 14 ±0.5 J 12.5 12.5 ±0.3 M R ≤3.5 R ≤3.5 N 33 33 +0.3/-0 P 29 29.5 ±0.3 R* M3 S 90° T** 0.6-1.5 T** 1.6-2.5 T** 2.6-3.5 **Recommended torque for M3 (90° countersunk flat head) is 0.5 Nm ** For selecting the panel thickness, please refer to the filter selector table. All dimensions in mm; 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m Please visitwww.schaffner.comto find more details on filter connections.

5 EMC/EMI Products Schaffner Group Datasheets 25 Mar 2019 Accessories for IEC Inlet Filters and Power Entry Modules The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might be variants of the filters where the accessories are not available. For further information please ask your local Schaffner Sales Partner and visit our homepagehttps://www.schaffner.com/. PPoowweerr CCoorrdd wwiitthh LLoocckkiinngg The locking system has a tensile force IIEECC CC1133 RReewwiirreeaabbllee CCoonnnneeccttoorr The locking system has a tensile force SSyysstteemm ffoorr IInnlleett FFiilltteerrss IILL 1133,, IILL of typical 200N. ffoorr iinnddiivviidduuaall PPoowweerr CCoorrdd wwiitthh of typical 300N. It is recommended to It is recommended to use it with use it with flange mount filters. For 1133 PP,, IILL 1199 LLoocckkiinngg SSyysstteemm flange mount filters. details refer to our Application Note Lock Power Cords with IEC Inlets and "Using IEC Lock Power Cords with IEC Filters" Inlets and Filters" Schaffner power Schaffner power cords with IEC lock connector with IEC lock guard against guard against accidental disconnection of all accidental disconnection of all electrical appliances with an IEC inlet. electrical appliances No exchange or modification of the with an IEC inlet. No exchange or IEC inlet or IEC inlet filter system is modification of the needed. Easy retrofit for all electronic IEC inlet or IEC inlet filter system is equipments and devices. needed. Easy retrofit for all electronic equipments and devices. Link to Datasheet: Datasheet IEC C13 Link to Datasheet: Datasheet IEC C13/ rewireable C19 locking cable IIBB -- IInnssuullaattiinngg BBoooottss There is a full range of insulating boots available from Schaffner that provide a physical cover for the exposed terminals on the back of IEC Inlet Filters. These boots fit the simplest non-fused and unswitched style up to the fully fused and switched IEC filtered inlet. The boots are made from a durable black PVC material that conforms to UL94-V0 flammability requirements. The boots slip easily over the back of the filter and reduce the risk of electrical shock to maintenance personnel whilst protecting the filter from environmental hazard such as the ingress of dust and moisture.

6 EMC/EMI Products Schaffner Group Datasheets 25 Mar 2019 Headquarters, global Sales and application centers innovation and development Switzerland China Spain Schaffner Group Schaffner EMC Ltd. Shanghai Schaffner EMC España Nordstrasse 11 T20-3 C, No 565 Chuangye Road, Calle Caléndula 93, Miniparc III, Edificio E 4542 Luterbach Pudong district El Soto de Moraleja, Alcobendas T +41 32 681 66 26 201201 Shanghai 28109 Madrid info@schaffner.com T +86 21 3813 9500 T +34 917 912 900 cschina@schaffner.com F +34 917 912 901 www.schaffner.com.cn spainsales@schaffner.com Finland Sweden Schaffner Oy Schaffner EMC AB Sauvonrinne 19 H Tegeluddsvägen 76, 2tr 08500 Lohja 115 28 Stockholm T +358 50 468 7284 T +46 8 5050 2425 finlandsales@schaffner.com swedensales@schaffner.com www.schaffner.com France Schaffner EMC S.A.S. Switzerland 16-20 Rue Louis Rameau Schaffner EMV AG 95875 Bezons Nordstrasse 11 T +33 1 34 34 30 60 4542 Luterbach F +33 1 39 47 02 28 T +41 32 681 66 26 francesales@schaffner.com switzerlandsales@schaffner.com Germany Taiwan R.O.C. Schaffner Deutschland GmbH Schaffner EMV Ltd. Schoemperlenstrasse 12B 20 Floor-2, No 97, Section 1, XinTai 5th Road 76185 Karlsruhe 22175 XiZhi District New Taipei City 22175 T +49 721 56910 T +886 2 2697 5500 F +49 721 569110 F +886 2 2697 5533 germanysales@schaffner.com taiwansales@schaffner.com www.schaffner.com.tw India Schaffner India Pvt. Ltd Thailand REGUS WORLD TRADE CENTRE Schaffner EMC Co. Ltd. WTC, 22nd Floor Unit No 2238, Brigade Northern Region Industrial Estate Gateway Campus, 26/1, Dr. Rajkumar Road 67 Moo 4 Tambon Ban Klang Malleshwaram (W) Amphur Muangg P.O. Box 14 560055 Bangalore 51000 Lamphun T +91 80 67935355 T +66 53 58 11 04 indiasales@schaffner.com F +66 53 58 10 19 thailandsales@schaffner.com Italy Schaffner EMC S.r.l. United Kingdom Via Ticino, 30 Schaffner Ltd. To find your local partner within Schaffner‘s 20900 Monza (MB) 5 Ashville Way, Molly Millars Lane global network:www.schaffner.com T +39 039 21 41 070 Wokingham © 2018 Schaffner Group italysales@schaffner.com RG41 2PL Berkshire T +44 118 9770070 Japan The content of this document has been Schaffner EMC K.K. F +44 118 9792969 carefullycheckedandunderstood.However, 1-32-12, Kamiuma, Setagaya-ku uksales@schaffner.com neitherSchaffnernoritssubsidiariesassume 7F Mitsui-seimei Sangenjaya Bldg. USA any liability whatsoever for any errors or 154-0011 Tokyo Schaffner EMC Inc. inaccuracies of this document and the T +81 3 5712 3650 52 Mayfield Avenue consequences thereof. Published specifica- F +81 3 5712 3651 Edison, New Jersey tions are subject to change without notice. japansales@schaffner.com T +1 732 225 9533 Productsuitabilityforanyareaofapplication www.schaffner.jp F +1 732 225 4789 must ultimately be determined by the usasales@schaffner.com customer. In all cases, products must never Singapore www.schaffnerusa.com be operated outside their published Schaffner EMC Pte Ltd. specifications. Schaffner does not guarantee #05-09, Kg Ubi Ind. Estate Schaffner North America theavailabilityofallpublishedproducts.This 408705 Singapore 6722 Thirlane Road disclaimer shall be governed by substantive T +65 6377 3283 24019 Roanoke, Virginia Swiss law and resulting disputes shall be F +65 6377 3281 T +1 276 228 7943 settledbythecourtsattheplaceofbusiness singaporesales@schaffner.com F +1 276 228 7953 of Schaffner Holding AG. Latest publications Schaffner North America andacompletedisclaimercanbedownloa- 823 Fairview Road ded from the Schaffner website. All 24382 Wytheville, Virginia trademarks recognized. T +1 276 228 7943 F +1 276 228 7258