DATASHEET IEC Inlet Filters FN 9244 Excellent Performance EMC/EMI Filter Superior attenuation performance Approvals & Compliances Optional earth line choke Complies with IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) (CQC except HI-types) Performance indicators The FN 9244 IEC inlet filter combines an IEC inlet and mains filter with superior filter attenuation in a small form factor. Choosing the FN 9244 product line brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Technical specifications Exceptional conducted attenuation performance, based on chokes with high saturation resistance Maximum continuous operating voltage 250 VAC, 50/60 Hz and excellent thermal behavior Operating frequency DC to 400 Hz Rear/front or snap-in mounting Rated currents 1 to 15 A @ 50°C max. Standard or wide mounting flange Approvals by rated current 1 to 10 A (ENEC, CQC) 1 to 15 A (UL, CSA) FN 9244 B versions comply with the requirements of High potential test voltage P –> PE 2000 VAC for 2 sec (standard types) 1MOP acc. to IEC/EN 60601-1 for creepage and P –> PE 2500 VAC for 2 sec (B types) clearance, leakage current and high potential P –> N 1000 VAC for 2 sec testing Protection category IP 40 according to IEC 60529 Optional earth line choke see FN 9244 E data sheet Temperature range (operation and storage) -25°C to +85°C (25/85/21) Custom-specific versions are available on request Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 Flammability corresponding to UL 94 V-2 or better Typical applications MTBF @ 40°C/230 V (Mil-HB-217F) ≤8 A: 2,035,000 hours ≤15 A: 1,035,000 hours Portable electrical and electronic equipment Small to medium-sized machines and household equipment Single-phase power supplies, switch-mode power supplies Test and measurement equipment Medical devices (MDD) In-vitro diagnostic medical devices (IVDD) Rack mounting equipment Typical electrical schematic

2 EMC/EMI Products Schaffner Group Datasheets 16 Apr 2020 Filter selection table <td/> <td/> Filter Rated current Leakage current* Inductance Capacitance Resistance Output Weight @ 50°C (25°C) @ 250 VAC/50 Hz L Cx Cy R connections (@ 120 VAC/60 Hz) [A] [mA] [mH] [μF] [nF] [kΩ] [g] FN9244x-1-06 1 (1.2) 0.31 (0.18) 59.53 0.1 2.2 -06 38 FN9244x-3-06 3 (3.5) 0.31 (0.18) 13.45 0.1 2.2 -06 38 FN9244x-6-06 6 (7.2) 0.31 (0.18) 4.1 0.1 2.2 -06 38 FN9244x-8-06 8 (10.6) 0.31 (0.18) 2.3 0.1 2.2 -06 38 FN9244x-10-06 10 (11.6) 0.31 (0.18) 1.02 0.1 2.2 -06 38 FN9244x-12-06 12 (12) 0.31 (0.18) 0.58 0.1 2.2 -06 38 FN9244x-15-06 15 (15) 0.31 (0.18) 0.4 0.1 2.2 -06 38 FN9244x-12-06HI 12 (12) 0.31 (0.18) 0.58 0.1 2.2 -06 38 FN9244x-15-06HI 15 (15) 0.31 (0.18) 0.4 0.1 2.2 -06 38 FN9244xR-1-06 1 (1.2) 0.31 (0.18) 59.53 0.1 2.2 1000 -06 38 FN9244xR-3-06 3 (3.5) 0.31 (0.18) 13.45 0.1 2.2 1000 -06 38 FN9244xR-6-06 6 (7.2) 0.31 (0.18) 4.1 0.1 2.2 1000 -06 38 FN9244xR-8-06 8 (10.6) 0.31 (0.18) 2.3 0.1 2.2 1000 -06 38 FN9244xR-10-06 10 (11.6) 0.31 (0.18) 1.02 0.1 2.2 1000 -06 38 FN9244xR-12-06 12 (12) 0.31 (0.18) 0.58 0.1 2.2 1000 -06 38 FN9244xR-15-06 15 (15) 0.31 (0.18) 0.4 0.1 2.2 1000 -06 38 FN9244xR-12-06HI 12 (12) 0.31 (0.18) 0.58 0.1 2.2 1000 -06 38 FN9244xR-15-06HI 15 (15) 0.31 (0.18) 0.4 0.1 2.2 1000 -06 38 FN9244xB-1-06 1 (1.2) 0.00 59.53 0.1 1000 -06 38 FN9244xB-3-06 3 (3.5) 0.00 13.45 0.1 1000 -06 38 FN9244xB-6-06 6 (7.2) 0.00 4.1 0.1 1000 -06 38 FN9244xB-8-06 8 (10.6) 0.00 2.3 0.1 1000 -06 38 FN9244xB-10-06 10 (11.6) 0.00 1.02 0.1 1000 -06 38 FN9244xB-12-06 12 (12) 0.00 0.58 0.1 1000 -06 38 FN9244xB-15-06 15 (15) 0.00 0.4 0.1 1000 -06 38 FN9244xB-12-06HI 12 (12) 0.00 0.58 0.1 1000 -06 38 FN9244xB-15-06HI 15 (15) 0.00 0.4 0.1 1000 -06 38 * Maximum leakage under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level. Typical filter attenuation Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym 11 aanndd 33 AA ttyyppeess 66 ttoo 1100 AA ttyyppeess 1122 aanndd 1155 AA ttyyppeess

3 EMC/EMI Products Schaffner Group Datasheets 16 Apr 2020 Product selector Distributor inventory Check stock levels at global distributorsvia the QR code Search for the individual filter at https://products.schaffner.com/stock(qr-code) Wider range of stock level availability: Stock level per types 1 - 15 A Link Standard housing types Housing with wider mounting flanges (U) Snap-in housing types (S&S1) Medical versions (B) Bleed resistor types (R) For example: FN 9244 B-15-06, FN 9244 S1B-10-06-20, FN 9244 R-12-06HI, FN 9244 UB-8-06 Mechanical data FN 9244 FN 9244-HI FN 9244 S FN 9244 S1

4 EMC/EMI Products Schaffner Group Datasheets 16 Apr 2020 FN 9244 U Installation Panel cut out Dimensions FN 9244 FN 9244 U FN 92244 S FN 92244 S1 FN 9244-HI Tol. A 48 48 29.9 29.9 48 B 22.4 25 22.4 22.4 22.4 C 40 40 40 ±0.2 D 38.25 38.25 38.25 38.25 38.25 E 27.8 27.7 27.8 27.8 27.8 +0.6/-0 F 5.7 5.7 5.7 5.7 5.7 G 20.1 20.1 20.1 20.1 20.1 +0.6/-0 H Ø3.3 Ø3.3 Ø3.3 I 14 14 14 14 14 J 13.3 13.3 13.3 13.3 13.3 M R ≤3 R ≤3 R ≤1.5 R ≤1.5 R ≤3 N 21.5 21.5 20.8 21.9 21.5 P 28.5 28.5 29.4 28.5 28.5 R* M3 M3 M3 S 90° 90° 90° T** 0.7-1.5 0.7-1.5 T** 1.5-2.2 1.5-2.2 **Recommended torque for M3 (90° countersunk flat head) is 0.5 Nm ** For selecting the panel thickness, please refer to the filter selector table. All dimensions in mm; 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m Please visitwww.schaffner.comto find more details on connectors.

5 EMC/EMI Products Schaffner Group Datasheets 16 Apr 2020 Accessories for IEC Inlet Filters and Power Entry Modules The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might be variants of the filters where the accessories are not available. For further information please ask your local Schaffner Sales Partner and visit our homepagehttps://www.schaffner.com/. PPoowweerr CCoorrdd wwiitthh LLoocckkiinngg The locking system has a tensile force IIEECC CC1133 RReewwiirreeaabbllee CCoonnnneeccttoorr The locking system has a tensile force SSyysstteemm ffoorr IInnlleett FFiilltteerrss IILL 1133,, IILL of typical 200N. ffoorr iinnddiivviidduuaall PPoowweerr CCoorrdd wwiitthh of typical 300N. It is recommended to It is recommended to use it with use it with flange mount filters. For 1133 PP,, IILL 1199 LLoocckkiinngg SSyysstteemm flange mount filters. details refer to our Application Note Lock Power Cords with IEC Inlets and "Using IEC Lock Power Cords with IEC Filters" Inlets and Filters" Schaffner power Schaffner power cords with IEC lock connector with IEC lock guard against guard against accidental disconnection of all accidental disconnection of all electrical appliances with an IEC inlet. electrical appliances No exchange or modification of the with an IEC inlet. No exchange or IEC inlet or IEC inlet filter system is modification of the needed. Easy retrofit for all electronic IEC inlet or IEC inlet filter system is equipments and devices. needed. Easy retrofit for all electronic equipments and devices. Link to Datasheet: Datasheet IEC C13 Link to Datasheet: Datasheet IEC C13/ rewireable C19 locking cable IIBB -- IInnssuullaattiinngg BBoooottss There is a full range of insulating boots available from Schaffner that provide a physical cover for the exposed terminals on the back of IEC Inlet Filters. These boots fit the simplest non-fused and unswitched style up to the fully fused and switched IEC filtered inlet. The boots are made from a durable black PVC material that conforms to UL94-V0 flammability requirements. The boots slip easily over the back of the filter and reduce the risk of electrical shock to maintenance personnel whilst protecting the filter from environmental hazard such as the ingress of dust and moisture.

6 EMC/EMI Products Schaffner Group Datasheets 16 Apr 2020 Headquarters, global Sales and application centers innovation and development Switzerland China Spain Schaffner Group Schaffner EMC Ltd. Shanghai Schaffner EMC España Industrie Nord T20-3 C, No 565 Chuangye Road, Calle Caléndula 93, Miniparc III, Edificio E Nordstrasse 11e Pudong district El Soto de Moraleja, Alcobendas 4542 Luterbach 201201 Shanghai 28109 Madrid T +41 32 681 66 26 T +86 21 3813 9500 T +34 917 912 900 info@schaffner.com cschina@schaffner.com F +34 917 912 901 www.schaffner.com.cn spainsales@schaffner.com Finland Sweden Schaffner Oy Schaffner EMC AB Sauvonrinne 19 H Östermalmstorg 1 08500 Lohja 114 42 Stockholm T +358 10 567 2855 T +46 8 5050 2425 finlandsales@schaffner.com swedensales@schaffner.com www.schaffner.com France Schaffner EMC S.A.S. Switzerland 16-20 Rue Louis Rameau Schaffner EMV AG 95875 Bezons Industrie Nord T +33 1 34 34 30 60 Nordstrasse 11e F +33 1 39 47 02 28 4542 Luterbach francesales@schaffner.com T +41 32 681 66 88 T +41 32 681 66 26 Germany switzerlandsales@schaffner.com Schaffner Deutschland GmbH Schoemperlenstrasse 12B Taiwan R.O.C. 76185 Karlsruhe Schaffner EMV Ltd. T +49 721 56910 20 Floor-2, No 97, Section 1, XinTai 5th Road F +49 721 569110 22175 XiZhi District New Taipei City 22175 germanysales@schaffner.com T +886 2 2697 5500 F +886 2 2697 5533 India taiwansales@schaffner.com Schaffner India Pvt. Ltd www.schaffner.com.tw REGUS WORLD TRADE CENTRE WTC, 22nd Floor Unit No 2238, Brigade Thailand Gateway Campus, 26/1, Dr. Rajkumar Road Schaffner EMC Co. Ltd. Malleshwaram (W) Northern Region Industrial Estate 560055 Bangalore 67 Moo 4 Tambon Ban Klang T +91 80 67935355 Amphur Muangg P.O. Box 14 indiasales@schaffner.com 51000 Lamphun T +66 53 58 11 04 Italy F +66 53 58 10 19 Schaffner EMC S.r.l. thailandsales@schaffner.com Via Ticino, 30 20900 Monza (MB) United Kingdom To find your local partner within Schaffner‘s T +39 039 21 41 070 Schaffner Ltd. global network:www.schaffner.com italysales@schaffner.com 1, Oakmede Place © 2020 Schaffner Group Japan Binfield RG42 4JF Berkshire Schaffner EMC K.K. The content of this document has been Taiju-Seimei Sangenjaya Bldg. T +44 118 9770070 carefullycheckedandunderstood.However, 1-32-12, Kamiuma, Setagaya-ku F +44 118 9792969 neitherSchaffnernoritssubsidiariesassume 154-0011 Tokyo uksales@schaffner.com any liability whatsoever for any errors or T +81 3 5712 3650 USA inaccuracies of this document and the F +81 3 5712 3651 Schaffner EMC Inc. consequences thereof. Published specifica- japansales@schaffner.com 52 Mayfield Avenue tions are subject to change without notice. www.schaffner.jp Edison, New Jersey Productsuitabilityforanyareaofapplication T +1 732 225 9533 must ultimately be determined by the Singapore F +1 732 225 4789 customer. In all cases, products must never Schaffner EMC Pte Ltd. usasales@schaffner.com be operated outside their published #05-09, Kg Ubi Ind. Estate www.schaffnerusa.com specifications. Schaffner does not guarantee 408705 Singapore theavailabilityofallpublishedproducts.This T +65 6377 3283 disclaimer shall be governed by substantive F +65 6377 3281 Swiss law and resulting disputes shall be singaporesales@schaffner.com settledbythecourtsattheplaceofbusiness of Schaffner Holding AG. Latest publications andacompletedisclaimercanbedownloa- ded from the Schaffner website. All trademarks recognized.