DATASHEET IEC Inlet Filters FN 9222 General Performance IEC Inlet Filter Rated currents up to 20 A Approvals Excellent performance/size ratio Optional medical versions (B type) according to IEC/EN 60601-1 Snap-in versions (S and S1 type) Hot inlet versions (HI type) Optional overvoltage protection (Z type) (CQC except HI-types) The FN 9222 IEC inlet filter combines an IEC inlet and mains filter with excellent filter attenuation in a small form factor. Choosing the FN 9222 product line Performance indicators brings you the rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mountingpossibilities and filters for medical applications are designed to offer you the desired solution. Features and benefits Exceptional conducted attenuation performance, based on chokes with highsaturation resistance Technical specifications and excellent thermal behavior Rear/front or snap-in mounting Maximum continuous operating voltage 250 VAC, 50/60 Hz Wide mounting flanges available Operating frequency DC to 400 Hz FN 9222 B versions comply with the requirements of Rated currents 1 to 20 A @ 50°C 1MOP acc. to IEC/EN 60601-1 for creepage and clearance, leakage current and high potential Approvals by rated current 1 to 10 A (ENEC, CQC) testing 16 A (ENEC, CQC) for 16 and 20 A types 1 to 20 A (UL, CSA) 12 and 15 A types with hot inlet available High potential test voltage P –> PE 2000 VAC for 2 sec (standard types) Optional surge pulse protection P –> N 250 VAC for 2 sec (all Z types) Different output connections offering maximum P –> N 1000 VAC for 2 sec (1 to 10 A types, not Z types) P –> PE 2500 VAC for 2 sec (B types) flexibility for assembly P –> N 1100 VDC for 2 sec (16 and 20 A types, not Z Custom-specific versions are available on request types) Protection category IP 40 according to IEC 60529 Typical applications Temperature range (operation and storage) -25°C to +85°C (25/85/21) Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 (X to XX A, Portable electrical and electronic equipment not Z types) Small to medium-sized machines and household Flammability corresponding to UL 94 V-2 or better equipment Surge pulse protection (Z type) Helps compliance to IEC61000-4-5 (Differential Mode only) Single-phase power supplies, switch-mode power supplies MTBF @ 40°C/230 V (Mil-HB-217F) ≤15 A: 3,040,000 hours ≥16 A: 2,256,000 hours Test and measurement equipment Medical equipment Rack mounting equipment

2 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Filter selection table Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight @ 50°C (25°C) @ 250 VAC/50 Hz L Cx Cy R (@ 120 VAC/60 Hz) [A] [mA] [mH] [µF] [nF] [kΩ] [g] FN 9222 x-1-.. 1 (1.2) 0.31 (0.18) 12 0.1 2.2 -06 -07 40 FN 9222 x-3-.. 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 -06 -07 40 FN 9222 x-6-.. 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 -06 -07 40 FN 9222 x-8-.. 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 -06 -07 40 FN 9222 x-10-.. 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 -06 -07 40 FN 9222 x-12-.. 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 -07 40 FN 9222 x-15-.. 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 -07 40 FN 9222 x-12-..HI 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 -07 40 FN 9222 x-15-..HI 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 -07 40 FN 9222 xR-1-.. 1 (1.2) 0.31 (0.18) 12 0.1 2.2 1000 -06 -07 40 FN 9222 xR-3-.. 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 1000 -06 -07 40 FN 9222 xR-6-.. 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 1000 -06 -07 40 FN 9222 xR-8-.. 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 1000 -06 -07 40 FN 9222 xR-10-.. 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 1000 -06 -07 40 FN 9222 xR-12-.. 12 (12) 0.31 (0.18) 0.11 0.1 2.2 1000 -06 -07 40 FN 9222 xR-15-.. 15 (15) 0.31 (0.18) 0.075 0.1 2.2 1000 -06 -07 40 FN 9222 R-16-06 16 (18.5) 0.31 (0.18) 0.54 0.33 2.2 1000 -06 100 FN 9222 R-20-06 20 (23) 0.31 (0.18) 0.4 0.33 2.2 1000 -06 100 FN 9222 xR-12-..HI 12 (12) 0.31 (0.18) 0.11 0.1 2.2 1000 -06 -07 40 FN 9222 xR-15-..HI 15 (15) 0.31 (0.18) 0.075 0.1 2.2 1000 -06 -07 40 FN 9222 xB-1-.. 1 (1.2) 0.00 12 0.1 1000 -06 -07 40 FN 9222 xB-3-.. 3 (3.5) 0.00 2.5 0.1 1000 -06 -07 40 FN 9222 xB-6-.. 6 (7.2) 0.00 0.78 0.1 1000 -06 -07 40 FN 9222 xB-8-.. 8 (10.6) 0.00 0.5 0.1 1000 -06 -07 40 FN 9222 xB-10-.. 10 (11.6) 0.00 0.225 0.1 1000 -06 -07 40 FN 9222 xB-12-.. 12 (12) 0.00 0.11 0.1 1000 -06 -07 40 FN 9222 xB-15-.. 15 (15) 0.00 0.075 0.1 1000 -06 -07 40 FN 9222 RB-16-06 16 (18.5) 0.00 0.54 0.33 1000 -06 100 FN 9222 RB-20-06 20 (23) 0.00 0.4 0.33 1000 -06 100 FN 9222 xB-12-..HI 12 (12) 0.00 0.11 0.1 1000 -06 -07 40 FN 9222 xB-15-..HI 15 (15) 0.00 0.075 0.1 1000 -06 -07 40 FN 9222 UZ-1-06 1 (1.2) 0.31 (0.18) 12 0.1 2.2 -06 43 FN 9222 UZ-3-06 3 (3.5) 0.31 (0.18) 2.5 0.1 2.2 -06 43 FN 9222 UZ-6-06 6 (7.2) 0.31 (0.18) 0.78 0.1 2.2 -06 43 FN 9222 UZ-8-06 8 (10.6) 0.31 (0.18) 0.5 0.1 2.2 -06 43 FN 9222 UZ-10-06 10 (11.6) 0.31 (0.18) 0.225 0.1 2.2 -06 43 FN 9222 UZ-12-06 12 (12) 0.31 (0.18) 0.11 0.1 2.2 -06 43 FN 9222 UZ-15-06 15 (15) 0.31 (0.18) 0.075 0.1 2.2 -06 43 * Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.

3 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Product selector Typical electrical schematic For example: FN 9222 E-15-06, FN 9222 ES1B-10-06-20, FN 9222 ER-12-06HI, FN 9222 EUB-8-06-20 Typical filter attenuation Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym 1 and 3 A types 6 to 10 A types 12 and 15 A types 16 and 20 A types

4 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Mechanical data FN 9222 1 to 15 A types FN 9222, 16 and 20 A types FN 9222 S FN 9222 S1 FN 9222-HI FN 9222 U -07 connection style Panel cut out Installation

5 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Dimensions FN 9222 FN 9222 U FN 9222 UZ FN 9222 S FN 9222 S1 FN 9222-HI Tol. 1 to 8 A 10 to 15 A 16 and 20 A 1 to 8 A 10 to 15 A 1 to 8 A 10 to 15 A 12 and 15 A A 48 48 53 51.85 51.85 29.9 29.9 29.9 29.9 48 B 22.4 22.4 30 25 25 22.4 22.4 22.4 22.4 22.4 C 40 40 42 40 40 40 ±0.2 D 38.25 38.25 62 38.25 46.7 38.25 38.25 38.25 38.25 38.25 E 27.8 27.8 34.5 27.7 27.7 27.8 27.8 27.8 27.8 27.8 +0.6/-0 F 5.7 5.7 3.8 5.7 5.7 5.7 5.7 5.7 5.7 5.7 G 20.1 20.1 26.5 20.1 20.1 20.1 20.1 20.1 20.1 20.1 +0.6/-0 H Ø3.3 Ø3.3 Ø3.5 Ø3.3 Ø3.3 Ø3.3 I 14 14 14 14 14 14 14 14 14 14 J 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 13.3 M R 3 R ≤3 R ≤1.5 R ≤3 R ≤3 R ≤1.5 R ≤ 1.5 R ≤1.5 R ≤1.5 R ≤3 N 21.5 21.5 27 21.5 21.5 20.8 20.8 21.9 21.9 21.5 P 28.5 28.5 34.7 28.5 28.5 29.4 29.4 28.5 28.5 28.5 R* M3 M3 M3 M3 M3 M3 S 90° 90° 90° 90° 90° 90° T** 0.7-1.5 0.7-1.5 0.7-1.5 0.7-1.5 T** 1.5-2.2 1.5-2.2 1.5-2.2 1.5-2.2 X AWG 18 AWG 16 AWG 18 AWG 16 AWG 18 AWG 16 AWG 16 Y 160 160 160 160 160 160 160 Z 6 6 6 6 6 6 6 **Recommended torque for M3 (90° countersunk flat head) is 0.5 Nm ** For selecting the panel thickness, please refer to the filter selector table. All dimensions in mm; 1 inch = 25.4 mm Tolerances according: ISO 2768-m/EN 22768-m Please visitwww.schaffner.comto find more details on filter connectors.

6 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Accessories for IEC Inlet Filters and Power Entry Modules The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might be variants of the filters where the accessories are not available. For further information please ask your local Schaffner Sales Partner and visit our homepagehttps://www.schaffner.com/. PPoowweerr CCoorrdd wwiitthh LLoocckkiinngg The locking system has a tensile force IIEECC CC1133 RReewwiirreeaabbllee CCoonnnneeccttoorr The locking system has a tensile force SSyysstteemm ffoorr IInnlleett FFiilltteerrss IILL 1133,, IILL of typical 200N. ffoorr iinnddiivviidduuaall PPoowweerr CCoorrdd wwiitthh of typical 300N. It is recommended to It is recommended to use it with use it with flange mount filters. For 1133 PP,, IILL 1199 LLoocckkiinngg SSyysstteemm flange mount filters. details refer to our Application Note Lock Power Cords with IEC Inlets and "Using IEC Lock Power Cords with IEC Filters" Inlets and Filters" Schaffner power Schaffner power cords with IEC lock connector with IEC lock guard against guard against accidental disconnection of all accidental disconnection of all electrical appliances with an IEC inlet. electrical appliances No exchange or modification of the with an IEC inlet. No exchange or IEC inlet or IEC inlet filter system is modification of the needed. Easy retrofit for all electronic IEC inlet or IEC inlet filter system is equipments and devices. needed. Easy retrofit for all electronic equipments and devices. Link to Datasheet: Datasheet IEC C13 Link to Datasheet: Datasheet IEC C13/ rewireable C19 locking cable IIBB -- IInnssuullaattiinngg BBoooottss There is a full range of insulating boots available from Schaffner that provide a physical cover for the exposed terminals on the back of IEC Inlet Filters. These boots fit the simplest non-fused and unswitched style up to the fully fused and switched IEC filtered inlet. The boots are made from a durable black PVC material that conforms to UL94-V0 flammability requirements. The boots slip easily over the back of the filter and reduce the risk of electrical shock to maintenance personnel whilst protecting the filter from environmental hazard such as the ingress of dust and moisture.

7 EMC/EMI Products Schaffner Group Datasheets 23 Oct 2019 Headquarters, global Sales and application centers innovation and development Switzerland China Spain Schaffner Group Schaffner EMC Ltd. Shanghai Schaffner EMC España Industrie Nord T20-3 C, No 565 Chuangye Road, Calle Caléndula 93, Miniparc III, Edificio E Nordstrasse 11e Pudong district El Soto de Moraleja, Alcobendas 4542 Luterbach 201201 Shanghai 28109 Madrid T +41 32 681 66 26 T +86 21 3813 9500 T +34 917 912 900 info@schaffner.com cschina@schaffner.com F +34 917 912 901 www.schaffner.com.cn spainsales@schaffner.com Finland Sweden Schaffner Oy Schaffner EMC AB Sauvonrinne 19 H Östermalmstorg 1 08500 Lohja 114 42 Stockholm T +358 10 567 2855 T +46 8 5050 2425 finlandsales@schaffner.com swedensales@schaffner.com www.schaffner.com France Schaffner EMC S.A.S. Switzerland 16-20 Rue Louis Rameau Schaffner EMV AG 95875 Bezons Industrie Nord T +33 1 34 34 30 60 Nordstrasse 11e F +33 1 39 47 02 28 4542 Luterbach francesales@schaffner.com T +41 32 681 66 26 switzerlandsales@schaffner.com Germany Schaffner Deutschland GmbH Taiwan R.O.C. Schoemperlenstrasse 12B Schaffner EMV Ltd. 76185 Karlsruhe 20 Floor-2, No 97, Section 1, XinTai 5th Road T +49 721 56910 22175 XiZhi District New Taipei City 22175 F +49 721 569110 T +886 2 2697 5500 germanysales@schaffner.com F +886 2 2697 5533 taiwansales@schaffner.com India www.schaffner.com.tw Schaffner India Pvt. Ltd REGUS WORLD TRADE CENTRE Thailand WTC, 22nd Floor Unit No 2238, Brigade Schaffner EMC Co. Ltd. Gateway Campus, 26/1, Dr. Rajkumar Road Northern Region Industrial Estate Malleshwaram (W) 67 Moo 4 Tambon Ban Klang 560055 Bangalore Amphur Muangg P.O. Box 14 T +91 80 67935355 51000 Lamphun indiasales@schaffner.com T +66 53 58 11 04 F +66 53 58 10 19 Italy thailandsales@schaffner.com Schaffner EMC S.r.l. Via Ticino, 30 United Kingdom 20900 Monza (MB) Schaffner Ltd. To find your local partner within Schaffner‘s T +39 039 21 41 070 1, Oakmede Place global network:www.schaffner.com italysales@schaffner.com Binfield © 2018 Schaffner Group Japan RG42 4JF Berkshire T +44 118 9770070 Schaffner EMC K.K. The content of this document has been Taiju-Seimei Sangenjaya Bldg. F +44 118 9792969 carefullycheckedandunderstood.However, 1-32-12, Kamiuma, Setagaya-ku uksales@schaffner.com neitherSchaffnernoritssubsidiariesassume 154-0011 Tokyo USA any liability whatsoever for any errors or T +81 3 5712 3650 Schaffner EMC Inc. inaccuracies of this document and the F +81 3 5712 3651 52 Mayfield Avenue consequences thereof. Published specifica- japansales@schaffner.com Edison, New Jersey tions are subject to change without notice. www.schaffner.jp T +1 732 225 9533 Productsuitabilityforanyareaofapplication F +1 732 225 4789 must ultimately be determined by the Singapore usasales@schaffner.com customer. In all cases, products must never Schaffner EMC Pte Ltd. www.schaffnerusa.com be operated outside their published #05-09, Kg Ubi Ind. Estate specifications. Schaffner does not guarantee 408705 Singapore Schaffner North America theavailabilityofallpublishedproducts.This T +65 6377 3283 6722 Thirlane Road disclaimer shall be governed by substantive F +65 6377 3281 24019 Roanoke, Virginia Swiss law and resulting disputes shall be singaporesales@schaffner.com T +1 276 228 7943 settledbythecourtsattheplaceofbusiness F +1 276 228 7953 of Schaffner Holding AG. Latest publications Schaffner North America andacompletedisclaimercanbedownloa- 823 Fairview Road ded from the Schaffner website. All 24382 Wytheville, Virginia trademarks recognized. T +1 276 228 7943 F +1 276 228 7258