0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH33 Series Increased FPC retention force ●Small size m m 2 1. 2.5mm d. [ 30 pos.] e v 17mm r e s e R s ht g Ri Metal fittings (Leadless) All D. ■ T Features L ●Can be mounted over conductive traces. O., 1. Low-profile, small PCB mounting area C Narrow width of only 2.5 mm reduced the board C footprint by approximately 17% to 57%, as compared to RI several similar FH Series HRS connectors. T C 2. Various contact pitch (0.4mm, 0.5mm, 1mm E L pitch) available E E In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm S pitch also available. O R 3. Increased FPC/FFC retention force No exposed contacts on the bottom of the HI _ In the horizontal direction: Approximately 2.0 times connector 8 1 (compared to 0.5mm pitch FH12 series.) 0 2 _In the vertical direction: Approximately 1.7 times ht (compared to 0.5mm pitch FH19 series.) ●Simple operation g ri 4. Conductive traces on the PCB can run qOpen the actuator y p under the connector wInsert FPC o C No exposed contacts on the bottom of the connector. 018 5. One finger operation of the actuator 1 AAccttuuaattoorr 2 Proven (in several other Hirose’s connectors) Flip- 1. Lock® rotating actuator assures reliable mechanical ec. and electrical connection with FPC/FFC, confirming it D with a definite tactile feel. 6. Easy FPC insertion and reliable electrical connection Proven Flip Lock actuator allows easy insertion of 2 FPC/FFC and provides a tactile sensation when fully FFPPCC closed, confirming complete electrical and mechanical connection. 7. Accepts standard FPC thickness ●Locked condition 0.3mm thick standard Flexible Printed Circuit (FPC) and eClose the actuator Flexible Flat Cable (FFC) can be used. rFPC connected 8. Board placement with automatic equipment Flat upper surface and tape and reel packaging 3 facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. 3 9. Halogen-free* (FH33J Series) 4 *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 2013.11w 1

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Product Specifications Current rating 0.5 A Operating temperature range -55 ç to +85ç (Note 1) Storage temperature range -10ç to +50ç (Note 2) (0.4mm pitch type 0.4A) Ratings Operating humidity range Relative humidity 90% max. Storage humidity range Relative humidity 90% max. (No Voltage rating 50 V AC (No condensation) condensation) (0.4mm pitch type 40V AC) Recommended FPC Thickness = 0.3 ± 0.05mm gold plated (under 30 pos.), 0.3 ± 0.03mm gold plated (over 31 pos.) Item Specification Conditions 1. Insulation resistance 500 Mø min. 100 V DC 2. Withstanding voltage No flashover or insulation breakdown. 150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type) 50 mø max. 3. Contact resistance 100 mø max(0.4mm pitch type). 1 mA * Including FPC conductor resistance d. e Contact resistance: 50 mø max. erv 4.Durability 100 mø max(0.4mm pitch type). 20 cycles s (insertion/ withdrawal) e No damage, cracks, or parts dislocation. R s Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles ht 5. Vibration No electrical discontinuity of 1μs or more. g Contact resistance: 50 mø max. in each of the 3 directions. Ri All 6. Shock No damage, cracks,1 o0r0 p marøts m daisxlo(0c.a4tmiomn. pitch type). Acceleration of 981 m/s2, 6 ms duration, sine half-wave D. waveform, 3 cycles in each of the 3 axis T O., L 7. (HSutemaiddiyty s tate) Contact resistance: 5100 0m møø m maax.x(0.4mm pitch type). 96 hours at 40ç and humidity of 90% to 95%. C Insulation resistance: 50 Mø min. Temperature : -55ç/+15ç to +35ç/+85ç/+15ç to +35ç C 8. Temperature cycle No damage, cracks, or parts dislocation. Time : 30 /2 to 3 /30 /2 to 3 (Minutes) RI 5 cycles T C 9. Resistance to Reflow : At the recommended temperature profile E No deformation of components affecting performance. L soldering heat Manual soldering: 350ç ± 10ç for 5 seconds E E Note 1: Includes temperature rise caused by current flow. S Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating O Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, R shipment or during transportation. HI 8 1 20 ■Materials ht g ri Part Material Finish Remarks y p Color:Beige o FH33 series PA C Color:Deep brown 18 FH33J series LCP Color:Beige 0 PPS Color:Black 2 Insulator UL94V-0 1. FH33M series LCP Color:Beige c. PA Color:Deep brown e D LCP Color:Beige FH33MHJ series PPS Color:Black Contacts Gold flash plated ----- Phosphor bronze Metalfittings Pure tin reflow plated ----- ■Ordering information FH 33 M H J - 12 (6) S B - 1 SH (10) 1 2 3 4 5 6 7 8 9 10 11 12 1 Series name:FH 4 Blank:Width 3.0mm(standard) 7 Standard type:Blank 10 Contact pitch: 2 Series No:33 H:Width 3.5mm(long actuator type) Eccentric type:Number of 0.4mm,0.5mm,1mm 3 Blank:0.5mm pitch,1mm pitch 5 Blank:Standard contacts 11 SH:SMT horizontal mounting M:0.4mm pitch J:Halogen-free 8 Contact alignment:S: single 12 Plating specifications: Flame retardance UL94V-0 9 Eccentric direction: Blank:Gold plated 6 Standard type:Number of contacts Blank:standard type (10)...Gold plating with nickel Eccentric type:Number of contacts B:Eccentric type barrier 5,000pieces/reel in 1mm housing (99)...Gold plating with nickel barrier 500pieces/reel 2

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Connector Dimensions ●0.4mm pitch, 0.5mm pitch type A±0.15 B G Lot No. indicator ∞Number of contacts (0.15) T 0.15G 15 0. ± 5 2 2. 1) ( A** d. e U v r Polarizing mark indicator HRS mark Cav No. e Number of contacts indicator s e R s ht g Ri All (0.15) F D. (C: FPC insertion slot dimension) T L O., D±0.1 F C C (120˚) RI Notes 1 The coplanarity of each terminal lead is within 0.1 max. T LEC 2 Tfrohem ctohnet abcott ttoemrm ain saul rlfeaacde poof sthitieo nin isnudlaictaotre bso tdhye. dimension (1.8) 35±0.1 ±0.1 E E 3 Difference of each terminal lead is within 0.1 max. 0 0. 1.2 0 S 4 Slight variations in color of the plastic compounds do not 0.5±0.1 a O affect form, fit or function of the connector. 1 2 0.15MAX0.55±0.1 (1.1) 0.25±0.10.15MAX 1 2 R 1.73±0.2 HI 5 After reflow, the terminal plating may change color, however 2.2±0.15 0.3+–00..115 3 8 this does not represent a quality issue. 1 0 Unit: mm 2 ht Part Number CL No. Number of Contacts A B C D T U g ri FH33-6S-0.5SH (**) 580-1301-1-** 6 5 2.5 3.57 4.35 0.5 0.45 y p FH33-9S-0.5SH (**) 580-1303-7-** 9 6.5 4 5.07 5.85 0.5 0.45 o C FH33-10S-0.5SH (**) 580-1304-0-** 10 7 4.5 5.57 6.35 0.5 0.45 8 FH33-12S-0.5SH (**) 580-1302-4-** 12 8 5.5 6.57 7.35 0.5 0.45 1 0 FH33-14S-0.5SH (**) 580-1305-2-** 14 9 6.5 7.57 8.35 0.5 0.45 2 1. FH33-19S-0.5SH (**) 580-1307-8-** 19 11.5 9 10.07 10.85 0.5 0.45 c. FH33-20S-0.5SH (**) 580-1317-1-** 20 12 9.5 10.57 11.35 0.5 0.45 e D FH33-26S-0.5SH (**) 580-1306-5-** 26 15 12.5 13.57 14.35 0.5 0.45 FH33-28S-0.5SH (**) 580-1300-9-** 28 16 13.5 14.57 15.35 0.5 0.45 FH33-30S-0.5SH (**) 580-1312-8-** 30 17 14.5 15.57 16.35 0.5 0.45 FH33-32S-0.5SH (**) 580-1310-2-** 32 18 15.5 16.57 17.35 0.5 0.45 FH33-36S-0.5SH (**) 580-1311-5-** 36 20 17.5 18.57 19.35 0.5 0.45 FH33-40S-0.5SH (**) 580-1308-0-** 40 22 19.5 20.57 21.35 0.5 0.45 FH33-45S-0.5SH (**) 580-1316-9-** 45 24.5 22 23.07 23.85 0.5 0.45 FH33M-16S-0.4SH (**) 580-1319-7-** 16 8.3 6 6.87 7.65 0.4 0.45 FH33J-4S-0.5SH (**) 580-1329-0-** 4 4 1.5 2.57 3.35 0.5 0.45 FH33J-10S-0.5SH (**) 580-1324-7-** 10 7 4.5 5.57 6.35 0.5 0.45 FH33J-12S-0.5SH (**) 580-1328-8-** 12 8 5.5 6.57 7.35 0.5 0.45 FH33J-16S-0.5SH (**) 580-1331-2-** 16 10 7.5 8.57 9.35 0.5 0.45 FH33J-18S-0.5SH (**) 580-1334-0-** 18 11 8.5 9.57 10.35 0.5 0.45 FH33J-19S-0.5SH (**) 580-1332-5-** 19 11.5 9 10.07 10.85 0.5 0.45 FH33J-40S-0.5SH (**) 580-1330-0-** 40 22 19.5 20.57 21.35 0.5 0.45 FH33MHJ-65S-0.4SH (**) 580-1325-0-** 65 27.9 25.6 26.47 27.25 0.4 0.95 Note 1: Embossed reel packaging (5,000 pieces/reel, 500 pieces/reel). Order by number of reels. 3

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Connector Dimensions ●1mm pitch type A±0.15 (1.75) (V) B G 1 ∞Number of contacts(0.15) 0.15 G 5 1 Lot No. indicator 0. ± 5 (1) 2.2 d. △ A** e rv HRS mark Cav No. 5) e 4 s Polarizing mark indicator Number of contacts indicator 0. e ( R s ht g Ri D. All (C: FPC inserDtio±n0 .s1lot dimension)(0.15) F T L O., F C RIC (120˚) T C E Notes 1 The coplanarity of each terminal lead is within 0.1 max. OSE EL 23 TfDrohifmefe crteohnnect abeco ott tfto eemram caihn s atuel rrlfemaacindea pol olfe stahitdieo niisn iswnudiltaihctiaontr e0 bs.1o t dhmye.a dxi.mension (1.8) 0 0.35±0.1 1.2±0.1 0 R 4 Slight variations in color of the plastic compounds do not 0.5±0.1 a HI affect form, fit or function of the connector. 1 2 0.15MAX0.55±01.1.73±(01..21) 0.25±0.10.15MAX 1 2 8 5 After reflow, the terminal plating may change color, however +015 1 20 this does not represent a quality issue. ht g ri y Unit: mm p Co Part Number CL No. Number of Contacts A B C D V 8 FH33-4S-1SH(**) 580-1322-1-** 4 6.5 3 5.07 5.85 1.75 01 FH33-12(6)SB-1SH(**) 580-1323-4-** 6 8 5 6.57 7.35 1.25 2 1. FH33J-12(6)SB-1SH(**) 580-1326-2-** 6 8 5 6.57 7.35 1.25 c. Note 1: Embossed reel packaging (5,000 pieces/reel, 500 pieces/reel). e Order by number of reels. D 4

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Recommended PCB mounting pattern and metal mask dimensions ●0.4mm pitch, 0.5mm pitch type 5 B 0 5±0. T ∞Number of co0n.t1acHts0.3±0.05(Land) H 2) 0.6 0.25±0.05(Metal mask) (0. 5 2.8±0.0 (0.15) (2.15) (2.45) (0.2) ved. 0.8±0.05 KJ±±00..11 (0.2) (0.15) r e (A) s e R *Recommended metal mask thickness = 0.1mm s ht Rig ■Recommended FPC/FFC dimensions All ●0.4mm pitch, 0.5mm pitch type D. L±0.05 T L T±0.07 B±0.03 O., C C T±0.03 0.03.53±±00..0033((FFPFCC)) 2-R0.2 <<ouvnedre 3r 13 0p opso.s>.0>.03.±3±0.00.305 RI ea) 0.27±0.03(0.4mm pitch) T ar C d LE pose ner) E x e E 3(E Stiff OS 3±0. MIN( R 2. 3 HI 3. 8 1 0 E 2 ht g ri Note 1: If the stiffener is less than 3.3 mm, E dimension must be 0.5 mm min. y p o C 8 Unit: mm 1 0 Part Number CL No. Number of Contacts A B J K L T 2 1. FH33-6S-0.5SH (**) 580-1301-1-** 6 5 2.5 3.8 4.9 3.5 0.5 ec. FH33-9S-0.5SH (**) 580-1303-7-** 9 6.5 4 5.3 6.4 5 0.5 D FH33-10S-0.5SH (**) 580-1304-0-** 10 7 4.5 5.8 6.9 5.5 0.5 FH33-12S-0.5SH (**) 580-1302-4-** 12 8 5.5 6.8 7.9 6.5 0.5 FH33-14S-0.5SH (**) 580-1305-2-** 14 9 6.5 7.8 8.9 7.5 0.5 FH33-19S-0.5SH (**) 580-1307-8-** 19 11.5 9 10.3 11.4 10 0.5 FH33-20S-0.5SH (**) 580-1317-1-** 20 12 9.5 10.8 11.9 10.5 0.5 FH33-26S-0.5SH (**) 580-1306-5-** 26 15 12.5 13.8 14.9 13.5 0.5 FH33-28S-0.5SH (**) 580-1300-9-** 28 16 13.5 14.8 15.9 14.5 0.5 FH33-30S-0.5SH (**) 580-1312-8-** 30 17 14.5 15.8 16.9 15.5 0.5 FH33-32S-0.5SH (**) 580-1310-2-** 32 18 15.5 16.8 17.9 16.5 0.5 FH33-36S-0.5SH (**) 580-1311-5-** 36 20 17.5 18.8 19.9 18.5 0.5 FH33-40S-0.5SH (**) 580-1308-0-** 40 22 19.5 20.8 21.9 20.5 0.5 FH33-45S-0.5SH (**) 580-1316-9-** 45 24.5 22 23.3 24.4 23 0.5 FH33M-16S-0.4SH (**) 580-1319-7-** 16 8.3 6 7.1 8.2 6.8 0.4 FH33J-4S-0.5SH (**) 580-1329-0-** 4 4 1.5 2.8 3.9 2.5 0.5 FH33J-10S-0.5SH (**) 580-1324-7-** 10 7 4.5 5.8 6.9 5.5 0.5 FH33J-12S-0.5SH (**) 580-1328-8-** 12 8 5.5 6.8 7.9 6.5 0.5 FH33J-16S-0.5SH (**) 580-1331-2-** 16 10 7.5 8.8 9.9 8.5 0.5 FH33J-18S-0.5SH (**) 580-1334-0-** 18 11 8.5 9.8 10.9 9.5 0.5 FH33J-19S-0.5SH (**) 580-1332-5-** 19 11.5 9 10.3 11.4 10 0.5 FH33J-40S-0.5SH (**) 580-1330-0-** 40 22 19.5 20.8 21.9 20.5 0.5 FH33MHJ-65S-0.4SH (**) 580-1325-0-** 65 27.9 25.6 26.7 27.8 26.4 0.4 5

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Recommended PCB mounting pattern and metal mask dimensions ●1mm pitch type 5 B 0 H 0. ± ∞Number of contacts 0.65 1 0.1 H 00..235±±00.0.055(L(Manedta)l mask) (0.2) 5 5) 0 1 2.8±0. (0. (2.15) (2.45) d. e v r se 05 (0.2) 5) Re ±0. W±0.1 1.15±0.1 0.1 s 0.8 (0.2) ( ht J±0.1 g Ri K±0.1 All (A) D. *Recommended metal mask thickness = 0.1mm T L O., C RIC ■Recommended FPC/FFC dimensions T C ●1mm pitch type E L E E S L±0.1 O R 1±0.1 B±0.1 X±0.1 HI 8 1±0.1 0.65±0.1 <under 30 pos.>0.3±0.05 1 <over 31 pos.>0.3±0.03 ht 20 a) 2-R 0.2 g e yri d ar 8 Cop 3(Expose Stiffener) 1 0. N( 20 3± MI 1. 2. 3.3 c. e D E Unit: mm Part Number CL No. Number of Contacts A B J K L W X FH33-4S-1SH(**) 580-1322-1-** 4 6.5 3 5.3 6.4 5 1.15 1 FH33-12(6)SB-1SH(**) 580-1323-4-** 6 8 5 6.8 7.9 6.5 0.65 0.5 FH33J-12(6)SB-1SH(**) 580-1326-2-** 6 8 5 6.8 7.9 6.5 0.65 0.5 6

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■FH33 Series FPC/FFC Construction (Recommended Specifications) 1. Using Single-sided FPC Material Name Material Thickness (μm) Covering film layer Polyimide 1 mil thick (25) Cover adhesive (25) Nickel under plated 1 to 5μm / Surface treatment 3 Gold plated 0.2μm Copper foil Cu 1oz 35 Base adhesive Heat-hardened adhesive 25 Base film Polyimide 1 mil thick 25 Reinforcement material adhesive Heat-hardened adhesive 30 d. Stiffener Polyimide 7 mil thick 175 e v Total 293 r e s e R s ht g Ri All 2. Using Double-sided FPC D. Material Name Material Thickness (μm) T L Covering film layer Polyimide 1 mil thick (25) O., Cover adhesive (25) C Nickel under plated 1 to 5μm / Surface treatment 3 C Gold plated 0.2μm RI Through-hole copper Cu 15 T C Copper foil Cu 1/2oz 18 E Base adhesive Heat-hardened adhesive 18 L E Base film Polyimide 1 mil thick 25 E S Base adhesive Heat-hardened adhesive 18 O Copper foil Cu 1/2oz 18 R HI Cover adhesive 25 8 Covering film layer Polyimide 1 mil thick 25 01 Reinforcement material adhesive Heat-hardened adhesive 50 ht 2 Stiffener Polyimide 4 mil thick 100 g Total 297 ri y p o C 8 1 0 3. Using FFC 2 1. c. e D Material Name Material Thickness (μm) Polyester film (12) Adhesive polyester thermoplastic type (30) Gold plated, soft copper film 35 Adhesive Polyester 30 Polyester 12 Adhesive Polyester 30 Stiffener Polyester 188 Total 295 πPractical tolerance of thickness dimension is ±20 μm 4. Precautions 1. This specification is a recommendation for the construction of the FH33 Series FPC and FFC (t=0.3 ±0.05). 2. For details about the construction, please contact the FPC/FFC manufacturers. 7

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Packaging Specifications ●Embossed Carrier Tape Dimensions ●Embossed Carrier Tape Dimensions (Tape width up to 24mm) (Tape width 32mm and over) (1.7) 4±0.1 2±0.15 8±0.1Ø1.5+0. 10 ±0.1 (1.7) 4±0.1 2±0.15 8±0.1Ø1.5+0. 10 ±0.1 (0.3) 1.75 5 7 (0.3) 1. 1 d. (Q) N±0.1 ±0.3 (Q) N±0. ±0.1 M±0.3 e M P v r e s hts Re (3(3.8)) (1) Fpalulaatcto esmmuareftaincct eewq fiuothirpment +0.151.7 0 g Ri (3) 1.5+ 00.1 All Unreeling direction (3.8) Flat surface for D. (1) paluatcoemmaetinct ewqiuthipment T L O., Unreeling direction C C RI CT ●Reel Dimensions E L E E 3) 1 S Ø ( O (R:INSIDE) R HI 8 1 0 2 ht g Copyri (Ø380) (Ø80) 8 1 0 2 c.1. (S:OUTSIDE) e D End section Mounting section Lead section (400 mm min.) Blank section Embossed carrier tape Blank section Top cover tape (10 pockets min.) (10 pockets min.) Note: 5,000 pieces per reel. Embossed tape 32 mm or wider will have perforated feed holes on two sides. 8

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Unit: mm Part Number CL No. Number of Contacts M N P Q R S FH33-6S-0.5SH (**) 580-1301-1-** 6 16 7.5 -------- 5.3 17.4 21.4 FH33-9S-0.5SH (**) 580-1303-7-** 9 16 7.5 -------- 6.8 17.4 21.4 FH33-10S-0.5SH (**) 580-1304-0-** 10 16 7.5 -------- 7.3 17.4 21.4 FH33-12S-0.5SH (**) 580-1302-4-** 12 16 7.5 -------- 8.3 17.4 21.4 FH33-14S-0.5SH (**) 580-1305-2-** 14 16 7.5 -------- 9.3 17.4 21.4 FH33-19S-0.5SH (**) 580-1307-8-** 19 24 11.5 -------- 11.8 25.4 29.4 FH33-20S-0.5SH (**) 580-1317-1-** 20 24 11.5 -------- 12.3 25.4 29.4 FH33-26S-0.5SH (**) 580-1306-5-** 26 24 11.5 -------- 15.3 25.4 29.4 FH33-28S-0.5SH (**) 580-1300-9-** 28 24 11.5 -------- 16.3 25.4 29.4 FH33-30S-0.5SH (**) 580-1312-8-** 30 24 11.5 -------- 17.3 25.4 29.4 FH33-32S-0.5SH (**) 580-1310-2-** 32 32 14.2 28.4 18.3 33.4 37.4 d. FH33-36S-0.5SH (**) 580-1311-5-** 36 32 14.2 28.4 20.3 33.4 37.4 e v FH33-40S-0.5SH (**) 580-1308-0-** 40 44 20.2 40.4 22.3 45.4 49.4 r e s FH33-45S-0.5SH (**) 580-1316-9-** 45 44 20.2 40.4 24.8 45.4 49.4 e R FH33M-16S-0.4SH (**) 580-1319-7-** 16 24 11.5 -------- 8.6 25.4 29.4 s FH33J-4S-0.5SH (**) 580-1329-0-** 4 16 7.5 -------- 4.3 17.4 21.4 ht g FH33J-10S-0.5SH (**) 580-1324-7-** 10 16 7.5 -------- 7.3 17.4 21.4 Ri FH33J-12S-0.5SH (**) 580-1328-8-** 12 16 7.5 -------- 8.3 17.4 21.4 All FH33J-16S-0.5SH (**) 580-1331-2-** 16 24 11.5 -------- 10.3 25.4 29.4 D. FH33J-18S-0.5SH (**) 580-1334-0-** 18 24 11.5 -------- 11.3 25.4 29.4 T FH33J-19S-0.5SH (**) 580-1332-5-** 19 24 11.5 -------- 11.8 25.4 29.4 L O., FH33J-40S-0.5SH (**) 580-1330-0-** 40 44 20.2 40.4 22.3 45.4 49.4 FH33MHJ-65S-0.4SH (**) 580-1325-0-** 65 44 20.2 40.4 28.2 45.4 49.4 C C FH33-4S-1SH (**) 580-1322-1-** 4 16 7.5 -------- 6.8 17.4 21.4 RI FH33-12(6)S-1SH (**) 580-1323-4-** 6 16 7.5 -------- 8.3 17.4 21.4 T C FH33J-12(6)S-1SH (**) 580-1326-2-** 6 16 7.5 -------- 8.3 17.4 21.4 E L E E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 9

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Recommended Temperature Profile ●Using Lead-free Solder paste HRS test conditions MAX 250ç Solder method : Reflow, IR/hot air 250 Environment : Room air 230ç Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.’s Part Number: M705- e 200 200ç 221CM5-32-10.5) ur erat Test board : Glass epoxy 25mm∞50mm∞0.8mm thick p m Land dimensions : Contacts lead 0.3mm∞0.65mm e 150 T 150ç Metal fittings 0.55mm∞0.8mm d. (ç) e Metal mask : Contacts lead 0.25mm∞0.65mm∞0.1mm v er 100 thick s e Metal fittings 0.55mm∞0.8mm∞0.1mm R s thick ht 50 g Ri 25ç This temperature profile is based on the above conditions. All (60 sec.) 90 to 120 sec. (60 sec.) In individual applications the actual temperature may vary, 0 D. Start Preheating Sodering depending on solder paste type, volume/thickness and T L board O., Time (Seconds) size/thickness. Consult your solder paste and equipment C C manufacturer for specific recommendations. RI T C E L E E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 10

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors ■Operation and Precautions Operation 1.FPC insertion procedure. Connector installed on the board. 1 Lift up the actuator. Use thumb or index finger. d. e v r e s e R s ht g Ri All 2 Fully insert the FPC in the connector paral- D. lel to mounting surface, with the exposed T conductive traces facing down. L O., C C RI T C FPC conductor E surface (Bottom side) L E E S O 3 Rotate down the actuator until firmly closed. It is R HI critical that the inserted FPC is not moved and 8 remains fully inserted. 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 2.FPC removal 1 Lift up the actuator. Carefully withdraw the FPC. 11

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Precautions Exercise care when handling connectors. Follow recommendations given below. PC board flexing SPC board connector mounting area The connectors are straight within 0.1 mm max. Make sure that the PC board connector mounting area flatness can accept the connector terminals without causing any failure of the solder joints. SHandling before mounting on PCB Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT d. RECOMMENDED. e v SPC Board handling r e s Exercise caution when handling boards with the connectors installed. Do not apply any forces e R affecting soldered joints. s Connector ht g PCB Ri All D. T L O., C C RI T C Precautions When Inserting or Removing FPC E L E Pay attention to the following points when inserting FPC. E S SActuator operation O 1Do not apply excessive force when opening the actuator prior to FPC insertion. When opening R HI make sure that the force is applied only to the actuator itself, avoiding touching of the contacts. 8 1 0 2 ht Damege to the contacts g ri y p o C 8 1 0 2 1. Damage to the contacts c. e 2Axis of rotation D (1 2 0˚) Axis of rotation Assure free rotation of the actuator 3The actuator will rotate 120 degrees 1 2 0° maximum. Do not force it to rotate further. 12

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Precautions 4When operating the actuator, do so at the center portion. 5As illustrated, do not attempt removal or re- positioning of the actuator. d. e v r e s e R s ht g Ri All D. T SFPC Insertionq O., L Tshhoew FnP),C t hsehno ucoldm bpele ateliglyn iends eprateradl.lel with the board surface and perpendicular with the connector (as C C RI Actuator Perpendicular with T the connector C E L E E FPC S O R HI 8 1 0 2 ht To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully g inserted. ri y p o Make sure that the FPC is NOT MOVED during the closing of the actuator. C 8 1 0 SFPC Insertionw 2 1. When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion c. entrance. Doing so will result in the contacts and FPC making strong contact and may cause e D deformation of the contacts, peeling of the FPC conductor, and other problems. Peeling of FPC conductor 13

FH33 Series●0.4mm,0.5 mm,1mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Precautions SVerification of the fully closed actuator. The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector. Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should not exceed 1 N. Routing the FPC (FPC fully inserted/ actuator closed) SFPC Load Do not apply force in excess of 0.15N max. in the upward direction (as illustrated). Do not bend the FPC too close to the actuator. d. e v r e s e R Load: 0.15N max. s ht g Ri All D. T L Removing the FPC O., Rotate the actuator to the open position (maximum open angle of 120°). Carefully withdraw the FPC. C C RI T EC 1 2 0° L E E S O R HI 8 1 0 2 ht g ri Other Precautions y p SHand Soldering Precautions o C When hand soldering: 8 1Do not perform reflow or hand soldering with the FPC inserted in the connector. 1 0 2Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. 2 1. 3Do not use excessive amount of solder or flux compounds. c. Operation of the actuator and contacts may be affected by excessive amounts of solder or flux e D compounds. 14

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors NOTES : d. e v r e s e R s ht g Ri All D. T L O., C C RI T C E L E E S O R HI 8 1 0 2 ht g ri y p o C 8 1 0 2 1. c. e D 15

FH33 Series●0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors USA: USA: USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, CA 37677 Professional Center Drive, Suite #100C Phone : 1-805-522-7958 95014 Livonia, MI 48154 Fax : 1-805-522-3217 Phone : 1-408-253-9640 Phone : 1-734-542-9963 http://www.hiroseusa.com Fax : 1-408-253-9641 Fax : 1-734-542-9964 http://www.hiroseusa.com http://www.hiroseusa.com GERMANY: THE NETHERLANDS: UK: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH HIROSE ELECTRIC EUROPE B.V. HIROSE ELECTRIC EUROPE B.V. UK BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern Hogehillweg #8 1101 CC Amsterdam Z-O First Floor, St Andrews House, Caldecotte Lake (Scharnhauser Park) Phone : 31-20-6557460 Business Park, Milton Keynes MK7 8LE Phone : 49-711-4560-02-1 Fax : 31-20-6557469 Phone : 44-1908-369060 Fax : 49-711-4560-02-299 http://www.hiroseeurope.com Fax : 44-1908-369078 http://www.hirose.de http://www.hirose.co.uk d. e v CHINA: CHINA: CHINA: r e HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD. HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE s e A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre R s Ring Middle Road, Chao Yang District, Beijing, 100025 Huang Pu District, Shanghai 200001 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 ht Phone : 86-10-5165-9332 Phone : 86-21-6391-3355 Phone : 86-755-8207-0851 g Ri Fax : 86-10-5908-1381 Fax : 86-21-6335-0767 Fax : 86-755-8207-0873 All http://www.hirose-china.com.cn http://www.hirose-china.com.cn http://www.hirose-china.com.cn D. HONG KONG: TAIWAN: SINGAPORE: T L HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD. HIROSE ELECTRIC CO., LTD. O., Unit 1102 A&B, Energy Plaza, 92 Granville Road, 103 8F, No.87, Zhengzhou Rd., Taipei 10 Anson Road #26-16 International Plaza 079903 Tsim Sha Tsui East, Kowloon Phone : 886-2-2555-7377 Phone : 65-6324-6113 C C Phone : 852-2803-5338 Fax : 886-2-2555-7350 Fax : 65-6324-6123 RI Fax : 852-2591-6560 http://www.hirose-taiwan.com.tw http://www.hirose-singapore.com.sg T http://www.hirose-hongkong.com.hk C E L KOREA: E E HIROSE KOREA CO., LTD. S 1261-10, Jeoungwhang-Dong, Shihung-City, O Kyunggi-Do 429-450 R HI Phone : 82-31-496-7000,7124 8 Fax : 82-31-496-7100 1 http://www.hirose.co.kr 0 2 ht g ri y p o C 8 1 0 2 1. c. e D ® 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com 16 The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the pur pose of improvements. Powered by TCPDF (www.tcpdf.org)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H irose Electric: FH33-26S-0.5SH(10) FH33-14S-0.5SH(10) FH33-12S-0.5SH(10) FH33-9S-0.5SH(10) FH33-28S-0.5SH(10) FH33- 10S-0.5SH(10) FH33-6S-0.5SH(10) FH33-19S-0.5SH FH33-19S-0.5SH(10) FH33-20S-0.5SH FH33-20S-0.5SH(10) FH33-30S-0.5SH FH33-30S-0.5SH(10) FH33-32S-0.5SH(10) FH33-36S-0.5SH(10) FH33-40S-0.5SH(10) FH33-45S- 0.5SH(10) FH33M-16S-0.4SH(10) FH33-10S-0.5SH FH33-14S-0.5SH FH33-26S-0.5SH FH33-28S-0.5SH FH33-6S- 0.5SH FH33-12(6)SB-1SH(10) FH33-4S-1SH(10) FH33J-10S-0.5SH(10) FH33J-12(6)SB-1SH(10) FH33J-12S- 0.5SH(10) FH33J-16S-0.5SH(10) FH33J-18S-0.5SH(10) FH33J-19S-0.5SH(10) FH33J-40S-0.5SH(10) FH33J-4S- 0.5SH(10) FH33MHJ-65S-0.4SH(10) FH33W-6S-0.5SH(10) FH33-28S-0.5SH(99) FH33-12S-0.5SH(99) FH33-9S- 0.5SH(99) FH33-10S-0.5SH(99) FH33-26S-0.5SH(99) FH33M-16S-0.4SH(99) FH33W-6S-0.5SH(99) FH33-4S- 1SH(99) FH33MHJ-65S-0.4SH(99) FH33J-12(6)SB-1SH(99) FH33J-4S-0.5SH(99) FH33J-40S-0.5SH(99) FH33J- 18S-0.5SH(99) FH33-30S-0.5SH(99) FH33-12(6)SB-1SH(99) FH33J-12S-0.5SH(99) FH33-45S-0.5SH(99) FH33- 32S-0.5SH(99) FH33J-19S-0.5SH(99) FH33-40S-0.5SH(99) FH33-19S-0.5SH(99) FH33-36S-0.5SH(99) FH33-6S- 0.5SH(99) FH33J-10S-0.5SH(99) FH33-20S-0.5SH(99) FH33J-16S-0.5SH(99) FH33-14S-0.5SH(99)