AUDIO F95 Series Conformal Coated Chip Optimized for Audio Applications FEATURES • Compliant to the RoHS2 directive 2011/65/EU • Rich sound in the bass register and clear sound,Materials are strictly selected to achieve high level sound. F95 series has no lead-frame, and no vibration factor LEAD-FREE COMPATI- • Low ESR, Low ESL BLE • Line up miniature size and high capacitance, necessary to mobile design COMPONENT • SMD conformal • Small and high CV L W APPLICATIONS • Mobile Audio Player H Resin • Smartphone • Mobile phone • Wireless Microphone System Solderelectrode Solderelectrode A B C (D) CASE DIMENSIONS:millimeters (inches) Single-side electrodes (Both electrodes at bottom side only) Code EIA Code EIA Metric L W H A B C D* 3.50±0.20 2.80±0.20 1.80±0.20 0.80±0.30 1.20±0.30 1.10±0.30 0.20 B 1411 3528-20 (0.138±0.012) (0.110±0.012) (0.031±0.008) (0.031±0.012) (0.047±0.012) (0.043±0.012) (0.008) MARKING 3.20±0.30 1.60±0.30 1.00±0.20 0.80±0.30 1.20±0.30 0.80±0.30 0.20 S 1306 3216-12 (0.126±0.012) (0.063±0.008) (0.039±0.008) (0.031±0.012) (0.047±0.012) (0.031±0.012) (0.008) S CASE B, T CASE 3.50±0.20 2.70±0.20 1.00±0.20 0.80±0.20 1.20±0.20 1.10±0.30 0.20 T 1411 3527-12 (0.138±0.012) (0.106±0.012) (0.039±0.008) (0.031±0.008) (0.047±0.008) (0.043±0.012) (0.008) *D dimension only for reference J8 J8 Capacitance Capacitance Code Code μF 68 100 150 220 330 470 680 code W7 A8 E8 J8 N8 S8 W8 HOW TO ORDER F95 0G 227 M S (cid:2) AM1 Q2 Type Rated Capacitance Tolerance Case Packaging AUDIO Single Voltage Code K = ±10% Size See Tape & Reel Series Face pF code: 1st two digits M = ±20% See Packaging Section Code Electrode represent significant figures, table 3rd digit represents multiplier above (number of zeros to follow) TECHNICAL SPECIFICATIONS Category Temperature Range: -55 to +125°C Rated Temperature: +85°C Capacitance Tolerance: ±20%, ±10% at 120Hz Dissipation Factor: Refer to next page ESR 100kHz: Refer to next page Leakage Current: Refer to next page Provided that: After 1 minute’s application of rated voltage, leakage current at 85°C 10 times or less than 20ºC specified value. After 1 minute’s application of rated voltage, leakage current at 125°C 12.5 times or less than 20ºC specified value. Capacitance Change By Temperature +15% Max. at +125°C +10% Max. at +85°C -10% Max. at -55°C 168 051718

AUDIO F95 Series Conformal Coated Chip Optimized for Audio Applications CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage µF Code 4V (0G) 6.3V (0J) 10V (1A) 68 686 S S B 100 107 S S/T B 150 157 S 220 227 S/T B 330 337 T B 470 477 B 680 687 Released ratings Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE Rated DF ESR *1 AVX Case Capacita n c e Voltage DCL @ 120Hz @ 100kHz ΔC/C MSL Part No. Size (μF) (μA) (V) (%) (Ω) (%) 4 Volt F950G686#SAAM1Q2 S 68 4 2.7 10 0.8 * 3 F950G107#SAAM1Q2 S 100 4 4.0 14 0.8 * 3 F950G157#SAAM1Q2 S 150 4 6.0 22 0.8 ±15 3 F950G227#SAAM1Q2 S 220 4 8.8 30 0.8 ±15 3 F950G227#TAAM1Q2 T 220 4 8.8 25 0.6 * 3 F950G337#TAAM1Q2 T 330 4 13.2 40 0.8 ±20 3 F950G477#BAAM1Q2 B 470 4 18.8 40 0.4 ±20 3 6.3 Volt F950J686#SAAM1Q2 S 68 6.3 4.3 14 0.9 * 3 F950J107#SAAM1Q2 S 100 6.3 6.3 20 0.9 ±15 3 F950J107#TAAM1Q2 T 100 6.3 6.3 14 0.6 * 3 F950J227#BAAM1Q2 B 220 6.3 13.9 30 0.4 * 3 F950J337#BAAM1Q2 B 330 6.3 20.8 35 0.6 ±20 3 10 Volt F951A686#BAAM1Q2 B 68 10 6.8 12 0.4 * 3 F951A107#BAAM1Q2 B 100 10 10.0 14 0.4 * 3 #: "M" for ±20% tolerance, "K" for ± 10% tolerance. Moisture Sensitivity Level (MSL) is defined according to J-STD-020. *1: ΔC/C Marked “*” Item All Case (%) Damp Heat ±10 Temperature cycles ±5 Resistance soldering heat ±5 Surge ±5 Endurance ±10 051718 169

AUDIO F95 Series Conformal Coated Chip Optimized for Audio Applications QUALIFICATION TABLE AUDIO F95 series (Temperature range -55ºC to +125ºC) TEST Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) D a m p H e a t Capacitance Change ........... Refer to page 169 (*1) ( S t e a d y S t a t e ) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less At -55°C / +125°C, 30 minutes each, 5 cycles T e m p e r a t u r e C y c l e s Capacitance Change ........... Refer to page 169 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. R e s i s t a n c e t o Capacitance Change ........... Refer to page 169 (*1) S o l d e r i n g H e a t Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After application of surge voltage in series with a 33Ω resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. S u r g e Capacitance Change ........... Refer to page 169 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After 2000 hours’ application of rated voltage 85°C, capacitors shall meet the characteristic requirements in the table above. E n d u r a n c e Capacitance Change ........... Refer to page 169 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body Shear Test which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is Terminal Strength applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. 170 051718

AUDIO F95 Series Conformal Coated Chip Optimized for Audio Applications AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONFORMAL Ta MnO 2 051718 171