F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors FEATURES • Conductive polymer electrode • Benign failure mode under recommended use conditions LEAD-FREE COMPATIBLE COMPONENT • Compliant to the RoHS2 directive 2011/65/EU • SMD facedown • Small and low profile • High volumetric efficiency APPLICATIONS • Smartphone • Portable game • Tablet PC • Bulk decoupling of SoC • Wireless module (System on chip) CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L W W H S S 1 2 1 2 1.60+0.20 0.85 +0.20 0.65±0.10 0.80±0.10*1 0.50±0.10 0.60±0.10 M 0603 1608-09 (0.063 -+ 00 . 1.0 0 0 8 ) (0.033 -+ 0 0. 1. 00 0 8 ) (0.026±0.004) (0.031±0.004) (0.020±0.004) (0.024±0.004) -0.004 -0.004 S 0805 2012-09 (02.0.0709 +-+ 000 . 1..20 0 00 8 ) (01..02459 +-+ 0 00. 1.. 200 00 8 ) (0.00.3950±±00..01004) (0.00.3810±±00..01004) (0.00.2500±±00..01004) (0.10.3090±±00..10004) -0.004 -0.004 1.10±0.05 0.60±0.05 0.35±0.05 0.55±0.05 0.30±0.05 0.50±0.05 U 0402 1106-06 (0.043±0.002) (0.024±0.002) (0.014±0.002) (0.022±0.002) (0.012±0.002) (0.020±0.002) *1 F380J476MMAAXE: 1.0mm Max. MARKING L W1 U CASE M CASE S CASE H *Capacitance Code W2 A J s S1 S2 S1 Rated Voltage Rated Voltage Code Code HOW TO ORDER F38 1A 225 M M Type Rated Capacitance Tolerance Case Packaging Special Code Voltage Code M=±20% Size AXE = Rated temperature 60°C and H pF code: 1st two digits See Reel Dia Tape Width dimension 1.0mm Max. represent significant figures, table (φ180) (mm) AXEH3 = Rated temperature 60°C and H 3rd digit represents multiplier above A 8 dimension 1.0mm Max., Low ESR (number of zeros to follow) LZT = Rated temperature 60°C LZTH1 = Rated temperature 60°C, Low ESR AH1, AH2, AH3 = Low ESR TECHNICAL SPECIFICATIONS Category Temperature Range: -55 to +105°C Rated Range: +85°C or +60°C (*2) Capacitance Tolerance: ±20% at 120Hz Dissipation Factor: Refer to next page (120Hz) ESR 100kHz: Refer to next page (120Hz) Leaking Current: Refer to next page At 20ºC after application of rated voltage for 5 minutes Provided that: After 5 minute’s application of rated voltage, leakage current at 105°C 10 times or less than 20ºC specified value. Termination Finish: M, S case: Gold Plating (standard), U case: Sn-3.5Ag Plating (standard) *2 LZT and AXE: Rated temperature +60°C, Surge and Endurance test temperature +60°C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 229 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 033120

F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors CAPACITANCE AND RATED VOLTAGE RANGE THE CORRELATIONS AMONG (LETTER DENOTES CASE SIZE) RATED VOLTAGE, SURGE VOLTAGE AND DERATED VOLTAGE Capacitance Rated Voltage *Cap μF Code 4V (0G) 6.3V (0J) 10V (1A) 25V (1E) Code F38 (Standard) 1.0 105 U A Rated Voltage (V) ≤85°C 6.3 10 25 2.2 225 M M J 85°C Surge Voltage (V) 8 13 32 4.7 475 U M/S S S 105°C Derated Voltage (V) 5 8 20 10 106 M/M(AH1,AH2)/S/U M/M(AH1) a 22 226 M/M(AH3,AH1)/S/S(AH1) M*4/S j F38-LZT, F38-AXE 33 336 M**/S S** n Rated Voltage (V) ≤60°C 4 6.3 10 47 476 M*4/M*4(H3)/S/S(AH1) S** s 60°C Surge Voltage (V) 5.2 8 13 68 686 S** w 85°C Derated Voltage (V) 2.8 4.5 7.2 100 107 S** S**/S**(H1) A 105°C Derated Voltage (V) 2 3.3 5 Released ratings, (Low ESR) *4 (AXE) Rated temperature 60ºC and H dimension 1.0mm Max. Please contact AVX when you need detail spec. ** (LZT) Rated temperature 60ºC. Please contact AVX when you need detail spec. Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE DF ESR 100kHz RMS Current (mA) *3 Case Capacitance Rated Voltage DCL AVX Part No. @ 120Hz @ 100kHz ΔC/C MSL Size (µF) (V) (µA) (%) (mΩ) 45°C 60°C 85°C 105°C (%) 4 Volt F380G107MSALZT S 100 4 80.0 10 200 474 332 – 237 * 3 6.3 Volt F380J105MUA U 1 6.3 0.6 6 1500 100 – 70 50 * 3 F380J475MUA U 4.7 6.3 20.0 10 1500 100 – 70 50 * 3 F380J106MMA M 10 6.3 10.0 8 500 224 – 157 112 * 3 F380J106MMAAH1 M 10 6.3 10.0 8 300 289 – 202 144 * 3 F380J106MMAAH2 M 10 6.3 10.0 8 200 354 – 247 177 * 3 F380J106MSA S 10 6.3 6.3 10 250 424 – 297 212 * 3 F380J106MUA U 10 6.3 20.0 10 1500 100 – 70 50 * 3 F380J226MMA M 22 6.3 13.9 10 500 224 – 157 112 * 3 F380J226MMAAH3 M 22 6.3 13.9 10 300 289 – 202 144 * 3 F380J226MMAAH1 M 22 6.3 13.9 10 200 354 – 247 177 * 3 F380J226MSA S 22 6.3 13.9 10 200 474 – 332 237 * 3 F380J226MSAAH1 S 22 6.3 13.9 10 150 548 – 383 274 * 3 F380J336MMALZT M 33 6.3 41.6 10 500 224 157 – 112 * 3 F380J336MSA S 33 6.3 20.8 10 200 474 – 332 237 * 3 F380J476MMAAXE M 47 6.3 59.2 10 500 224 157 – 112 * 3 F380J476MMAAXEH3 M 47 6.3 59.2 10 300 289 202 – 144 * 3 F380J476MSA S 47 6.3 29.6 10 200 474 – 332 237 * 3 F380J476MSAAH1 S 47 6.3 29.6 10 150 548 – 383 274 * 3 F380J686MSALZT S 68 6.3 86.0 10 200 474 332 – 237 * 3 F380J107MSALZT S 100 6.3 126.0 10 200 474 332 – 237 * 3 F380J107MSALZTH1 S 100 6.3 126.0 10 150 548 383 – 274 * 3 10 Volt F381A225MMA M 2.2 10 10.0 6 500 224 – 157 112 * 3 F381A475MMA M 4.7 10 10.0 6 500 224 – 157 112 * 3 F381A475MSA S 4.7 10 4.7 10 300 387 – 271 194 * 3 F381A106MMA M 10 10 10.0 15 500 224 – 157 112 * 3 F381A106MMAAH1 M 10 10 10.0 15 300 289 – 202 144 * 3 F381A226MMAAXE M 22 10 44.0 10 500 224 157 – 112 * 3 F381A226MSA S 22 10 22.0 10 200 474 – 332 237 * 3 F381A336MSALZT S 33 10 99.0 10 200 474 332 – 237 * 3 F381A476MSALZT S 47 10 94.0 10 200 474 332 – 237 * 3 25 Volt F381E225MMA M 2.2 25 10.0 10 500 224 – 157 112 * 3 F381E475MSA S 4.7 25 11.8 10 500 300 – 210 150 * 3 *3: ΔC/C Marked “*” Moisture Sensitivity Level (MSL) is defined according to J-STD-020 Item All Case (%) Damp Heat, steady state -20 to +30 Rapid change of temperature ±20 Resistance soldering heat ±20 Surge ±20 Endurance ±20 230 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 033120

F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors RECOMMENDED DEREATING FACTOR Voltage and temperature derating as percentge of Vr F38 LZT, AXE 100% 100% 100% 95% Rated Voltage Rated Voltage 90% 80% 80% Recommended Applications 85% Recommended Applications Voltage for Vr ≤6.3V Voltage 80% 80% 60% Recommended Applications 75% 50% Voltage for Vr ≥10V 70% 72% 40% 40% 65% 64% 60% 20% 55% 50% 0% -55ºC 85ºC 105ºC -55ºC 0ºC 60ºC 105ºC QUALIFICATION TABLE F38 series (Temperature Range -55ºC to +105ºC) TEST Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Damp Heat Capacitance Change ........... Refer to page 229 (*3) (Steady State) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of Initial specified value At -55°C / +105°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 229 (*3) Temperature Cycles Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value 5 seconds reflow at 260°C Resistance to Capacitance Change ........... Refer to page 229 (*3) Soldering Heat Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After application of surge voltage in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC or +60°C (*2), capacitors shall meet the characteristic requirements in the table above. Surge Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 300% or less of initial specified value After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C or +60°C (*2), capacitors shall meet the characteristic requirements in the table above. Endurance Capacitance Change ........... Refer to page 229 (*3) Dissipation Factor ................ 200% or less of initial specified value Leakage Current .................. 400% or less of initial specified value After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no Shear Test electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the Terminal Strength center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. *2 LZT and AXE: Rated temperature +60°C, Surge and Endurance test temperature +60°C NOTICE: DESIGN, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 231 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 033120

F38 Series Conductive Polymer, Miniature, Undertab Solid Electrolytic Chip Capacitors SOLID ELECTROLYTIC CAPACITOR ROADMAP CONDUCTIVE CONVENTIONAL NIOBIUM POLYMER TANTALUM OXIDE TC Series T Series N Series T Cx T xx N xx F Series F Series F38 F xx – conductive – MnO – MnO CATHODE 2 2 polymer DIELECTRIC Ta O Ta O Nb O 2 5 2 5 2 5 ANODE Niobium + Tantalum + Tantalum + Oxide FIVE CAPACITOR CONSTRUCTION STYLES J = J-lead Undertab TACmicrochip® Conformal Hermetic SERIES LINE UP : Conductive Polymer TCS High Rel. TCH TCB & Special hermetics COTS+ COTS+ multianode Hermetically sealed Industrial & TCQ Automotive AEC-Q200 TCM Standard TCJ multianode F38 TCN Lowest ESR Standard Low Profile miniature low profile undertab undertab J-CAP™ High Energy low profile undertab 232 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 033020