DataSheet Power Modules F18 Series • Industry Standard Package and Circuits • Power Control Building Blocks • 10 Circuits to Choose from • UL Recognized E72445 AVAILABLE OPTIONS Circuit Type CAD CCH HD RD CAH D SD CCD DH SDK Series F18 92 SD 1200 Load Current Operating Voltage 27: 25 Amps 92: 90 Amps 400: 120 VAC 1200: 480 VAC 42: 40 Amps 107: 105 Amps 600: 240 VAC 1400: 530 VAC 57: 55 Amps 1000: 380 VAC 1600: 600 VAC Required for valid part number For options only and not required for valid part number Note: Not all combinations available ELECTRICAL SPECIFICATIONS Symbol 27 42 57 92 107(2) Maximum DC Output Current (Tc = 85°C) I 25 A 40 A 55 A 90 A 105 A D Maximum Voltage Drop @ Amps Peak V 1.55V @ 75 A 1.4V @ 120 A 1.4V @ 165 A 1.40V @ 270 A 1.65V @ 300 A F Operating Junction Temperature Range T -40 -125˚ C -40 - 125°C -40 - 125°C -40 - 125°C -40 - 125°C J Critical Rate of Rise of On-State Current @ TJ=125°C [A/μs] di/dt 100 100 100 100 100 Critical Rate of Rise of Off-State Voltage [V/μs] dv/dt 1000 1000 1000 1000 1000 400 (120 VAC) 600 (240 VAC) Repetitive Peak Reverse Voltage (AC Line Nominal) [Vpk] V 800 (280 VAC) RRM 1200 (480 VAC) 1400 (530 VAC) 1600 (600 VAC) Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A] ITSM 400 1000 1500 1950 2250 Maximum I²T for Fusing (t=8.3ms) [A²sec] I2T 670 4150 9350 15800 25000 Maximum Required Gate Current to Trigger @ 25°C [mA] IGT 150 150 150 150 150 Maximum Required Gate Voltage to Trigger @ 25°C [V] V 3.0 3.0 3.0 3.0 3.0 GT Average Gate Power [W] PG(AV) 0.5 0.5 0.5 0.5 0.5 Maximum Peak Reverse Gate Voltage [V] VGM 5.0 5.0 5.0 5.0 5.0 Maximum Thermal Resistance, Junction to Ceramic Base per Chip [°C/W] R 0.4 0.28 0.25 0.14 0.135 JC Isolation Voltage [Vrms] VISOL 2500 2500 2500 2500 2500 GENERAL SPECIFICATIONS Description Parameters Weight (typical) 4.75 oz (135g) Torque Required Terminal Stud Screw : 30 in. lbs. Mounting Screws : 20 in. lbs. GENERAL NOTES (1) All parameters at 25°C and per section unless otherwise specified. (2) Available only in SD and SDK circuit configuration. Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

DataSheet Power Modules CIRCUIT DIAGRAMS DH AC + - GK22 CCH 1 2 3 GK22 RD AC + - G2 G2 K2 K2 AC + - AC + - 1 2 3 HD CAH CCD 1 2 3 AC + - KG11 1 2 3 K1 G1 1 2 3 AC + -- 1 2 3- K1 K1 G1 G1 CAD 1 2 3 SD AC + - KGGK1212 SDK AC + - KGKG2211 1 2 3 G2 K2 K2 G2 AC + - AC + - D K1 K1 + - G1 G1 + - MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] .244 .550 .787 .787 .590 (6.2) DIA. (14.0) (20.0) (20.0) (15.0) .787 .500 [20.0] [12.7] 3.150 .393 (79.9) [10.0] .110 X .036 M5 SCREW FASTON TERMINALS 3 PLCS 1.195 1.180 [30.3] [29.9] 3.620 (91.9) .12 (3.0) Agency Approvals E72445 Rev. 012518 ECN#20400 Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

DataSheet Power Modules DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 存在电击、 HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧 SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险 EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE. OR ARC FLASH. • Desconectar • Eteindre EXPLOSION. • Spenga tutta • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先 power before suministros de sources jeglichen che fornisce 关闭电源。 installing or energia a este d'énergie de Strom ab, der questa working with equipo antes cet appareil dieses Gerät apparecchiatura 若不遵守这些说明， this equipment. de trabajar avant de versorgt, bevor prima di lavorare con este equipo. travailler Sie an dem a questa 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten apparecchiatura 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen and replace all las conexiones • Verificare tutti • Vor dem covers before y colocar todas • Vérifier tous i collegamenti Drehen auf turning on las tapas antes connections, et e sostituire Energie alle power. de energizer remettre tous tutte le coperture Anschlüsse el equipo. couverts en prima Failure to follow olace avant de überprüfen dell’accensione these El mettre sous und alle instructions will incumplimiento Abdeckungen L'omissione di result in death de estas De non-suivi de ersetzen. queste istruzioni or serious injury. instrucciones ces instructions Unterlassung provocherà la puede provocar provoquera la dieser morte o la muerte o mort ou des Anweisungen lesioni serie lesiones serias. lésions sérieuses können zum sérieuses. Tode oder zu schweren Verletzungen führen. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG • The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren. • Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen, torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder • Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein. this product. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann Failure to follow these instructions can result in des lésions corporelles graves ou des Körperverletzung oder Materialschäden serious injury, or equipment damage. dommages matériels. zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性 RISCHIO DI DANNI MATERIALI E D'INVOLUCRO SOBRECALENTAMIENTO DE LA UNIDAD CALDO • 产品的一侧面板可能很热，在其冷却前请 • Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。 estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。 enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en prima di toccarlo. • 请勿让液体及其他异物进入本产品。 • Seguire le istruzioni di montaggio corrette. particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo • No dejar que penetren líquidos o cuerpos apparecchio. extraños en el producto. La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明， Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o 极有可能造成严重人体伤害或者设备的损坏。 producirse graves lesiones, daños materiales. danni alle apparecchiature. Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

DataSheet Power Modules ANNEX - ENVIRONMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Toxic or hazardous Substance and Elements Name Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 部件 有毒有害物质或元素 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 50 Do not forget to visit us at: www.crydom.com Copyright © 2018 Crydom Inc. Specifications subject to change without notice.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: S ensata: F1842SD1200 F18107SD1200 F18107SD1600 F18107SD400 F18107SDK1000 F18107SDK1200 F18107SDK1400 F18107SDK1600 F18107SDK600 F1827CAD1200 F1827CAD1600 F1827CAH1200 F1827CCD1600 F1827CCD400 F1827CCD600 F1827D1600 F1827D400 F1827D600 F1827HD1000 F1827HD1200 F1827HD1400 F1827HD1600 F1827HD600 F1827RD1000 F1827RD1200 F1827RD1400 F1827RD1600 F1827RD600 F1827SD1000 F1827SD1200 F1827SD1600 F1827SDK1000 F1827SDK1200 F1827SDK1400 F1827SDK1600 F1827SDK600 F1842CAD1200 F1842CAD400 F1842CAD600 F1842CAH1000 F1842CAH1400 F1842CAH1600 F1842CAH400 F1842CAH600 F1842CCD1000 F1842CCD1200 F1842CCD1600 F1842CCD400 F1842CCD600 F1842D1000 F1842D1600 F1842D400 F1842HD1000 F1842HD1200 F1842HD1400 F1842HD1600 F1842HD600 F1842RD1000 F1842RD1200 F1842RD1400 F1842RD1600 F1842SD1000 F1842SD1600 F1842SDK1000 F1842SDK1200 F1842SDK1400 F1842SDK1600 F1842SDK600 F1857CAD400 F1857CAD600 F1857CCD1200 F1857CCD1600 F1857CCD400 F1857CCD600 F1857D1200 F1857D1600 F1857D400 F1857D600 F1857HD1000 F1857HD1200 F1857HD1400 F1857HD1600 F1857HD600 F1857RD1000 F1857RD1200 F1857RD1400 F1857RD1600 F1857RD400 F1857RD600 F1857SD1000 F1857SD1200 F1857SD1400 F1857SD1600 F1857SD600 F1857SDK1000 F1857SDK1200 F1857SDK1400 F1857SDK1600 F1857SDK600 F1892CAD1200